Skip to content

#powder

Keywords by Co - Occurrence

  1. Teixeira João, Jesus Manuel, Rangel Bárbara, Alves Jorge et al. (2026-01)
    Evaluation of Printing Performance of Cementitious Pastes with Alternative Powders
  2. Singh Amardeep, Sun Jingting, Qi Deng, Abden Md et al. (2026-01)
    Evaluating Glass Powder Substitution for 3D Printed Concrete:
    Effects on Thermal Properties and Embodied Carbon
  3. Ding Tao, Wei Jun, Sun Jingting, Feng Kaikai (2025-12)
    Experimental Study on Thermal Properties of 3D Printed Concrete with Recycled Sand and Powder
  4. Liu Xuelin, Kong Jiafeng, Chen Yidong, Wang Liang et al. (2025-12)
    Rheology and Printability Control of Low-Carbon 3D-Printed Cementitious Materials via Circular Use of Recycled Concrete Powder
  5. Öztürk Ece, Ince Ceren, Borgianni Yuri, Nicolaides Demetris et al. (2025-12)
    Printability, Engineering Properties and Environmental Implications of 3D-Printed Cementitious Mortars Incorporating Hydrated Lime, Tile Powder and Accelerator
  6. Sikora Paweł, Federowicz Karol, Skibicki Szymon, Techman Mateusz et al. (2025-11)
    Demonstration of 3D-Printed Concrete Containing Fine Recycled Concrete Aggregates and Recycled Concrete Powder:
    Rheology, Early-Age, Shrinkage, Mechanical, and Durability Performance.
  7. Li Jiannan, Singh Amardeep, Zhao Yasong, Sun Jingting et al. (2025-11)
    Enhancing Thermo-Mechanical and Moisture Properties of 3D-Printed Concrete Through Recycled Ultra-Fine Waste Glass Powder:
    Corrigendum
  8. Lyu Ping, Wang Kejin, Doyle Shelby, Laflamme Simon et al. (2025-10)
    Green 3D Printing Concrete Containing Biochar and Waste Wind Turbine Blade Powder
  9. Lin Yini, Yan Jiachuan, Sun Ming, Tang Boyang et al. (2025-08)
    Effects of Waste Glass Powder on Printability, Hydration and Microstructure of 3D Printing Concrete
  10. Ma Jinyi, Zhang Haiyan, Wang Yanzhi, Xiong Lu et al. (2025-07)
    Effect of Clay Brick Powder and Recycled Fine Aggregates on Properties of 3D Printed Concrete After High Temperature Exposure
  11. Xiong Baocheng, Liu Huanbao, Nie Ping, Li Xiaoxi et al. (2025-04)
    Effect of Different Surface Modification Methods of Small Particle Size Recycled Rubber Powder on Mechanical Properties of 3D Printed Concrete
  12. Cavalcante Tiago, Toledo Filho Romildo, Mendoza Reales Oscar (2025-04)
    Rheological and Environmental Implications of Recycled Concrete Powder as Filler in Concrete 3D Printing
  13. Flor Juncal Luis, Scott Allan, Clucas Don, Loporcaro Giuseppe (2025-02)
    Permeability and Electrical Resistivity of 3D-Printed Mortars Using Local Materials (Zeolite, Calcined Clay, and Mussel Shell Powder):
    Aotearoa, New Zealand
  14. Huang Bo, Ge Yutian, Wang Xiangyu, Wang Yufei et al. (2024-11)
    Recycled Ceramic-Brick-Powder Utilization in Fiber-Reinforced 3D Printing Concrete:
    An Eco-Friendly Substitute to Conventional Fine Aggregates
  15. Jesus Manuel, Ribeiro Elis, Teixeira João, Rangel Bárbara et al. (2024-11)
    3D Printed Mortars with Marble-Powder Towards Sustainable Construction
  16. Wan Linxiaoyi, Liu Jingyang, Bard Joshua, Cupkova Dana (2024-11)
    Towards Adaptive Additive Manufacturing:
    Image-Based Monitoring for Binder Jet 3D Printing of Coarse Composite Concrete Powders
  17. Li Jiannan, Singh Amardeep, Zhao Yasong, Sun Jingting et al. (2024-11)
    Enhancing Thermo-Mechanical and Moisture Properties of 3D Printed Concrete Through Recycled Ultra-Fine Waste-Glass-Powder
  18. Chajec Adrian, Šavija Branko (2024-09)
    The Effect of Using Surface Functionalized Granite-Powder-Waste on Fresh Properties of 3D Printed Cementitious Composites
  19. Sheng Zhaoliang, Zhu Binrong, Cai Jingming, Han Jinsheng et al. (2024-09)
    Influence of Waste-Glass-Powder on Printability and Mechanical Properties of 3D Printing Geopolymer Concrete
  20. Wolf Christoph, Robens-Radermacher Annika, Unger Jörg (2024-09)
    Optimization Framework for Large-Scale Powder-Bed 3D Printed Concrete Structures Under Various Constraints
  21. Hlaváček Petr, Wolf Christoph, Robens-Radermacher Annika, Kühne Hans-Carsten (2024-09)
    Powder-Bed 3D Printing of Cementitious Materials for Lightweight Construction Elements
  22. Zargayouna Habib, Paquet Elodie, Mabrouki Tarek, Hamdi Essaieb et al. (2024-09)
    Analysis of the Effect of Substituting Cement with Marble-Powder on the Mortar Characteristics Used in 3D Printing
  23. Canavarro Cavalcante Tiago, Castrillon Fernandez Letitia, Toledo Filho Romildo, Mendoza Reales Oscar (2024-09)
    3D Printable Mortars with Different Recycled Concrete Powders as Fillers
  24. Wei Yazhi, Zhang Hui (2024-09)
    Influence of Temperature and Humidity on Mechanical Properties of Calcined-Oyster-Shell-Powder-Modified 3D Printed Concrete
  25. Hou Shaodan, Wu Wenbo, Duan Zhenhua, Zhou Shuai et al. (2024-09)
    Rheology of Fiber-Reinforced Mortar for 3D Printing Construction:
    Effect of Recycled Hybrid-Powder and Polyethylene-Fiber
  26. Yan Ruizhen, Meng Fangqi, Ke Guoju, Jia Kerui (2024-08)
    Comparative Evaluation of the Applicability of 3D Printing Mortar with Different Waste-Powders
  27. Jia Lutao, Niu Geng, Dong Enlai, Jiang Yifan et al. (2024-08)
    Optimization-Strategy for Incorporating Recycled Brick-Powder in 3D Printed Concrete by Balancing Low-Carbon Footprint and Enhanced Performance
  28. Yang Chao, Xu Xinglong, Lei Zuxiang, Sun Junbo et al. (2024-06)
    Enhancing Mechanical Properties of Three-Dimensional Concrete at Elevated Temperatures Through Recycled Ceramic-Powder Treatment Methods
  29. Liu Xiongfei, Zhao Xi, Wang Nan, Zhang Yi et al. (2024-05)
    Powder-Based 3D Printed Magnesium Phosphate Cement:
    Mechanical Isotropy Optimization Using Borax
  30. Salari Farid, Zocca Andrea, Bosetti Paolo, Hlaváček Petr et al. (2024-05)
    Powder-Bed 3D Printing by Selective Activation of Magnesium-Phosphate-Cement:
    Determining Significant Processing Parameters and Their Effect on Mechanical Strength
  31. Cavalcante Tiago, Toledo Filho Romildo, Mendoza Reales Oscar (2024-05)
    Influence of Recycled Concrete-Powder on Rheology of Printable Cement-Based Matrixes
  32. Jia Zijian, Kong Lingyu, Jia Lutao, Ma Lei et al. (2024-04)
    Printability and Mechanical Properties of 3D Printing Ultra-High-Performance Concrete Incorporating Limestone-Powder
  33. Robayo-Salazar Rafael, Vargas Armando, Martínez Fabio, Gutiérrez Ruby (2024-02)
    Utilization of Powders and Fine Aggregates from the Recycling of Construction and Demolition Waste in the 3D Printing of Portland-Based Cementitious Materials
  34. Liu Xiongfei, Wang Nan, Zhang Yi, Ma Guowei (2024-02)
    Optimization of Printing Precision and Mechanical Property for Powder-Based 3D Printed Magnesium Phosphate Cement Using Fly-Ash
  35. Zhou Yiyi, Luo Haoran, Anand Kamal, Singh Amardeep et al. (2024-02)
    Sustainable Use of Ultrafine Recycled Glass in Additive Manufactured Reactive-Powder Concrete
  36. Jia Lutao, Jia Zijian, Zhang Zedi, Tang Zhenzhong et al. (2024-02)
    Effect of Recycled Brick-Powder with Various Particle-Features on Early-Age Hydration, Water-State, and Rheological Properties of Blended Cement-Paste in the Context of 3D Printing
  37. Panda Biranchi, Shakor Pshtiwan, Laghi Vittoria (2023-12)
    Powder-Bed Additive Manufacturing
  38. Li Te, Tier Laire (2023-09)
    Analysis of the Effect of Glass-Powder on the Printability of Cement-Based Materials for 3D Printing Using ImageJ
  39. Robayo-Salazar Rafael, Martínez Fabio, Vargas Armando, Gutiérrez Ruby (2023-06)
    3D Printing of Hybrid Cements Based on High Contents of Powders from Concrete, Ceramic and Brick Waste Chemically Activated with Sodium Sulphate (Na2SO4)
  40. Hou Shaodan, Duan Zhenhua, Ye Taohua, Zou Shuai et al. (2023-06)
    Mechanical Properties and Pore-Structure of 3D Printed Mortar with Recycled Powder
  41. Deng Qi, Zou Shuai, Xi Yonghui, Singh Amardeep (2023-06)
    Development and Characteristic of 3D Printable Mortar with Waste-Glass-Powder
  42. Zhao Yasong, Gao Yangyunzhi, Chen Gaofeng, Li Shujun et al. (2023-04)
    Development of Low-Carbon Materials from GGBS and Clay-Brick-Powder for 3D Concrete Printing
  43. Shakor Pshtiwan, Nejadi Shami, Paul Gavin, Gowripalan Nadarajah (2023-04)
    Effects of Different Orientation-Angle, Size, Surface-Roughness, and Heat-Curing on Mechanical Behavior of 3D Printed Cement-Mortar with and without Glass-Fiber in Powder-Based 3DP
  44. Ma Xiaosong, Tan Linzhen, Lu Yuanjing, Yao Wu et al. (2023-03)
    Upcycling of Waste Plasterboard for the Synthesis of High-Quality Gypsum-Based 3D Printing-Powder
  45. Ma Guowei, Hu Tingyu, Wang Fang, Liu Xiongfei et al. (2023-02)
    Magnesium Phosphate Cement for Powder-Based 3D Concrete Printing:
    Systematic Evaluation and Optimization of Printability and Printing Quality
  46. Chun Seung-Yeop, Kim Su-jin, Kim Woon-Gi, Lee Geumyeon et al. (2022-12)
    Powder-Bed-Based 3D Printing with Cement for Sustainable Casting
  47. Zhang Chao, Jia Zijian, Luo Zhe, Deng Zhicong et al. (2022-11)
    Printability and Pore-Structure of 3D Printing Low-Carbon Concrete Using Recycled Clay-Brick-Powder with Various Particle-Features
  48. Kan Deyuan, Liu Guifeng, Cao Shuang, Chen Zhengfa et al. (2022-11)
    Mechanical Properties and Pore-Structure of Multi-Walled Carbon-Nano-Tube-Reinforced Reactive Powder-Concrete for Three-Dimensional Printing Manufactured by Material-Extrusion
  49. Qian Hao, Hua Sudong, Yue Hongfei, Feng Guiyang et al. (2022-09)
    Utilization of Recycled Construction-Powder in 3D Concrete Printable Materials through Particle-Packing-Optimization
  50. Kaushik Sandipan, Sonebi Mohammed, Amato Giuseppina, Perrot Arnaud et al. (2022-08)
    Investigation of Fresh Properties of 3D Concrete Printing Containing Nano-Clay in Forms of Suspension and Powder
  51. Tao Yaxin, Mohan Manu, Rahul Attupurathu, Yuan Yong et al. (2022-08)
    Stiffening Controllable Concrete Modified with Redispersible Polymer Powder for Twin-Pipe Printing
  52. Tao Yaxin, Lesage Karel, Tittelboom Kim, Yuan Yong et al. (2022-06)
    Using Limestone-Powder as a Carrier for the Accelerator in Extrusion-Based 3D Concrete Printing
  53. Nistler Maximilian, Kovaleva Daria, Tepper Louis, Blandini Lucio et al. (2022-05)
    Camera-Based Process Monitoring for Powder-Bed Additive Manufacturing in Construction
  54. Wang Huan, Tian Xinchen, Wei Huixian, Dai Xueyan et al. (2022-04)
    Effects of Redispersible Latex-Powder on the Performance of 3D Printing Cementitious Materials
  55. Mai (née Dressler) Inka, Lowke Dirk, Perrot Arnaud (2022-03)
    Fluid-Intrusion in Powder-Beds for Selective Cement-Activation:
    An Experimental and Analytical Study
  56. Hou Shaodan, Xiao Jianzhuang, Duan Zhenhua, Ma Guowei (2021-10)
    Fresh Properties of 3D Printed Mortar with Recycled Powder
  57. Zhang Yifan, Aslani Farhad (2021-08)
    Development of Fiber-Reinforced Engineered Cementitious Composite Using Polyvinyl-Alcohol-Fiber and Activated Carbon-Powder for 3D Concrete Printing
  58. Yang Huashan, Che Yujun, Shi Mengyuan (2021-07)
    Influences of Calcium-Carbonate-Nano-Particles on the Workability and Strength of 3D Printing Cementitious Materials Containing Limestone-Powder
  59. Zhang Yi, Jiang Zhengwu, Zhu Yanmei, Zhang Jie et al. (2020-10)
    Effects of Redispersible Polymer-Powders on the Structural Build-Up of 3D Printing Cement Paste with and without Hydroxypropyl-Methylcellulose
  60. Nething Christoph, Smirnova Maya, Gröning Janosch, Haase Walter et al. (2020-08)
    A Method for 3D Printing Bio-Cemented Spatial Structures Using Sand and Urease-Active-Calcium-Carbonate-Powder
  61. Matthäus Carla, Back Daniel, Weger Daniel, Kränkel Thomas et al. (2020-07)
    Effect of Cement-Type and Limestone-Powder-Content on Extrudability of Lightweight Concrete
  62. Shakor Pshtiwan, Nejadi Shami, Gowripalan Nadarajah (2020-07)
    Effect of Heat-Curing and E6-Glass Fiber-Reinforcement Addition on Powder-Based 3DP Cement Mortar
  63. Zuo Wenqiang, Dong Chenghao, Keita Emmanuel, Roussel Nicolas (2020-07)
    Penetration Study of Liquid in Powder-Bed for 3D Powder-Bed Printing
  64. Tao Yaxin, Lesage Karel, Tittelboom Kim, Yuan Yong et al. (2020-07)
    Effect of Limestone-Powder Substitution on Fresh and Hardened Properties of 3D Printable Mortar
  65. Skibicki Szymon, Kaszyńska Maria, Wahib Nawid, Techman Mateusz et al. (2020-07)
    Properties of Composite Modified with Limestone-Powder for 3D Concrete Printing
  66. Nematollahi Behzad, Xia Ming, Sanjayan Jay (2019-09)
    Enhancing Strength of Powder-Based 3D Printed Geopolymers for Digital Construction Applications
  67. Xia Ming, Nematollahi Behzad, Sanjayan Jay (2019-09)
    Post-Processing Techniques to Enhance Strength of Portland Cement Mortar Digitally Fabricated Using Powder-Based 3D Printing Process
  68. Shakor Pshtiwan, Nejadi Shami, Paul Gavin (2019-05)
    An Investigation into the Effects of Deposition-Orientation of Material on the Mechanical Behavior of the Cementitious Powder and Gypsum-Powder in Inkjet 3D Printing
  69. Feng Peng, Meng Xinmiao, Chen Jian-Fei, Ye Lieping (2019-02)
    Mechanical Properties of Structures 3D Printed with Cementitious Powders
  70. Xia Ming, Nematollahi Behzad, Sanjayan Jay (2019-02)
    Properties of Powder-Based 3D Printed Geopolymers
  71. Xia Ming, Nematollahi Behzad, Sanjayan Jay (2019-02)
    Development of Powder-Based 3D Concrete Printing Using Geopolymers
  72. Xia Ming, Nematollahi Behzad, Sanjayan Jay (2018-09)
    Compressive Strength and Dimensional Accuracy of Portland Cement Mortar Made Using Powder-Based 3D Printing for Construction Applications
  73. Shakor Pshtiwan, Sanjayan Jay, Nazari Ali, Nejadi Shami (2017-02)
    Modified 3D Printed Powder to Cement-Based Material and Mechanical Properties of Cement Scaffold Used in 3D Printing
  74. Feng Peng, Meng Xinmiao, Chen Jian-Fei, Ye Lieping (2015-06)
    Mechanical Properties of Structures 3D Printed with Cementitious Powders