#geopolymer¶

Keywords by Co - Occurrence¶

#print (133) #concrete (59) #base (53) #property (51) #construction (34)

1. Murali Gunasekaran, Kravchenko Ekaterina, Yuvaraj Divya, Avudaiappan Siva (2025-12)
   Next-Generation Green Construction:
   3D-Printed Geopolymer Concrete with Optimized Rheology, Mechanical Performance, and Environmental Efficiency
2. Li Liqing, Shi Zhenkun, Wang Lei, Sui Yi et al. (2025-12)
   3D Printing of Simulated Lunar Soil Geopolymer and Analysis of Its Weak Surface and Anisotropic Performance
3. Yan Yufei, Zhang Mo, Ma Guowei (2025-12)
   Synergistic Effect of Multi-Supplementary Materials on Rheology and Ultra-Early Stage Properties of 3D Printable FA-GBFS Geopolymer
4. Sando Mona, Alves Santos Sara, Worms Paul, Gurlo Aleksander et al. (2025-12)
   Evaluation of Continuous Epoxy-Impregnated Carbon Fiber Reinforcement in a 3D-Printable Geopolymer Composite
5. Shilar Fatheali, Shilar Mubarakali (2025-12)
   Performance-Based Analysis of 3D Printed Geopolymers Relating Durability, Microstructure, and Life Cycle Assessment
6. Liu Xinhao, Hu Jiajun, Xiong Guiyan, Cundy Andrew et al. (2025-12)
   Long-Term Durability and Degradation Mechanisms of 3D Printed Geopolymers (3DPG) With/Without Healing Agents in Marine Environments
7. Athira R., Sathyan Dhanya (2025-11)
   Review of 3D Printing Advancements in Geopolymer Concrete:
   Current Challenges and Future Directions
8. Hasan Md, Xu Jie, Uddin Md (2025-11)
   A Critical Review of 3D Printed Fiber-Based Geopolymer Concrete:
   Fresh Properties, Mechanical Performance, and Current Limitations
9. Khalid Lawand, Mermerdaş Kasım, Ekmen Şevin, Khidhir Bzeni Dillshad (2025-11)
   Optimization of Fresh and Hardened Properties of Fiber-Reinforced 3D Printed Geopolymer Composites Using Response Surface Methodology:
   A Data-Driven Approach Based on Prior Experimental Studies
10. Tang Jiyu, Wang Zhihang, Gao Danying, Yang Lin et al. (2025-11)
    Research Progress on 3D Printed Geopolymer Concrete
11. Assi Lateef, Alsalman Ali, Kareem Rahman, Carter Kealy (2025-11)
    Advantages and Challenges of 3D Geopolymer-Based Concrete in Construction
12. Valeri Manuela, Sangiorgio Valentino, Cantagallo Christina (2025-10)
    From Traditional Materials to Geopolymers:
    History, Performance, Sustainability and 3D Printing Applications
13. Uddin Md, Mostazid Md, Faysal Md, Shi Xinjun (2025-10)
    Developing a Novel Strength Predictive Modeling for 3D Printable Geopolymer Concrete:
    An Interpretable Data-Driven Approach
14. Safdar Gardezi Syed, Tanyildizi Harun, Haroglu Hasan, Coskun Ahmet (2025-09)
    Acid Attack Performance of 3D Printing Nano-ZnO Modified Geopolymer Mortar
15. Anwar Muhammad, Zhu Xingyi, Zhang Yating, Wang Jiakang et al. (2025-09)
    Synergistic Effects of Microwave Curing Regimes on Early, Mid, and Long-Term Strengths and Microstructural Performance of Fly Ash-Slag Based 3D-Printed Geopolymers
16. Elhag Ahmed, Mabrouk Abdelkader, Ghazouani Nejib, Nasir Umara (2025-09)
    Advances in Sustainable 3D-Printed Geopolymer Concrete:
    Materials, Performance, and Environmental Impact in Next Generation Green Construction
17. Shilar Fatheali, Ganachari Sharanabasava, Osman N., Ramesh S. et al. (2025-08)
    Advancements in Fiber-Reinforced Geopolymer Along with 3D Printed and Nano Concrete in Sustainable Construction
18. Ramakrishnan Sayanthan, Pasupathy Kirubajiny, Manalo Allan, Sanjayan Jay (2025-07)
    Rheological, Mechanical and Fire Resistance Performance of Waste Glass Activated Geopolymers for Concrete 3D Printing
19. Wang Jiakang, Anwar Muhammad, Zhu Xingyi, Zhang Yating et al. (2025-07)
    Robust Optimization of Formulation Ratios for the Mechanical, Microstructural and Printing Performance of Cost-Effective 3D Printing Geopolymer
20. Pan Keheng, Cheng Yinhan, Qu Guangfei, Yuan Zheng et al. (2025-07)
    Development and Optimization of Geopolymer-Based 3D Printing Materials Utilizing Industrial Solid Waste:
    Rheological Properties and Practical Applications
21. Balina Karina, Gailitis Rihards, Šinka Māris, Argalis Pauls et al. (2025-07)
    Prospective LCA for 3D-Printed Foamed Geopolymer Composites Using Construction Waste as Additives
22. Mahmoodi Obaid, Siad Hocine, Lachemi Mohamed, Şahmaran Mustafa (2025-07)
    Recent Advances in CDW-Based Geopolymers:
    A Review of Mechanical Performance, Structural Application, 3D Printing, Durability and Sustainability
23. Sando Mona, Stephan Dietmar (2025-07)
    Online Monitoring for 3D Printable Geopolymers:
    Automated Slug Test Analysis with Image Analysis Revealing Mixing Sequence Effects
24. Gasmi Abrar, Guessasma Mohamed, Davidovits Ralph, Pélegris Christine (2025-06)
    Unveiling Additive Effects in 3D Printed Geopolymer Composites:
    A Multi-Scale Analysis Coupling Rheological Insights and CFD-Optimized Deposition
25. Pour Arash, Farsangi Ehsan, Yang T., Li Shaofan et al. (2025-06)
    3D Printing of Conventional and Geopolymer Concretes:
    Advancements, Challenges, Future Directions, and Cost Analysis
26. Ye Chengjie, Xu Jie, Lacidogna Giuseppe (2025-06)
    Fracture Behavior of 3D Printed Geopolymer Concrete Containing Waste Ceramic
27. Gailitis Rihards, Radina Liga, Pakrastins Leonids, Sprince Andina (2025-06)
    Mechanical and Early Long-Term Property Assessment of Foamed 3D-Printable Geopolymer Composite
28. Pereira Carolina, Vieira Henrique, Gonçalves Nuno, Ascensão Guilherme et al. (2025-05)
    Innovative Waste-Containing 3D-Printed Geopolymer Structures for Enhanced Acoustic Comfort in Built Environments
29. Zhu Xingyi, Anwar Muhammad, Deng Guomin, Wang Xiaoming et al. (2025-05)
    Effect of Microwave Heating Under Varying Exposure Conditions on Rheological Properties, Interlayer Bond and Buildability Performance of 3D-Printed Geopolymer
30. Aly Ahmed Aly, Mantawy Islam (2025-05)
    Additive Construction of Low Embodied Carbon Concrete:
    Geopolymer Concrete
31. Jaji Mustapha, Babafemi Adewumi, Zijl Gideon (2025-05)
    Mechanical Performance of Extrusion-Based Two-Part 3D-Printed Geopolymer Concrete:
    A Review of Advances in Laboratory and Real-Scale Construction Projects
32. Jia Yanhong, Chen Yao, Li Yanchen, Le Huirong (2025-05)
    Impacts of the Rheological Performance on Dynamic Printing of Metakaolin-Based Geopolymer
33. Lori Ali, Novais Rui, Ascensão Guilherme, Fernandes Fábio et al. (2025-05)
    Chemically Foamed Geopolymers for 3D Printing Applications
34. Becher Anton, Gądek Szymon, Korniejenko Kinga (2025-05)
    3D Printing with Geopolymers and Its Applications
35. Mishra Jyotirmoy, Babafemi Adewumi, Combrinck Riaan (2025-04)
    Limitations and Research Priorities in 3D-Printed Geopolymer Concrete:
    A Perspective Contribution
36. Tanyildizi Harun, Seloglu Maksut, Bakri Abdullah Mohd, Razak Rafiza et al. (2025-04)
    The Rheological and Mechanical Properties of 3D-Printed Geopolymers:
    A Review
37. Sun Yifan, Ma Siqi, Chen Qingze, Chen Guoliang et al. (2025-04)
    Lunar Regolith Simulant-Derived 3D-Printed Geopolymers with Optimized Mechanical and Thermal Management Properties
38. Shen Jianyu, Ye Taohua, Xiao Jianzhuang, Li Shuisheng (2025-04)
    Mechanical and Thermal Properties of 3D Printed Earth Concrete Solidified by Geopolymers:
    A Study of Utilizing Excavated Clay
39. Temirzakuly Bakbergen, Nurgaliuly Dias, Kim J., Shehab Essam et al. (2025-04)
    Development of Cost-Effective Geopolymer Mortars from Low-Grade Metakaolin and Bottom Ash for 3D Construction Printing
40. Ali Shah Syed, Zhang Shipeng, Xuan Dongxing, Poon Chi (2025-04)
    Development of a Novel Mixing Strategy for Set-on-Demand Printing of One-Part Geopolymer Using Municipal Solid Waste Incineration Bottom Ash and Blast Furnace Slag
41. Maralapalle Vedprakash, Kumavat Hemraj, Nadaf Maheboobsab, Zende Aijaz et al. (2025-04)
    Optimizing 3D Geopolymer Concrete for Sustainable Construction:
    A Review of Material Selection, Printing Methods, and Properties
42. İlcan Hüseyin, Külak Adnan, Şahin Oğuzhan, Aldemir Alper et al. (2025-04)
    Reinforcement and Modular System for 3DCP Geopolymer Structures Using Construction and Demolition Waste
43. Chen Wei, Pan Jinlong, Zhu Binrong, Han Jinsheng et al. (2025-03)
    Nonlinear Predictive Modeling of Building Rates Incorporating Filament Compression Deformations in 3D Printed Geopolymer Concrete
44. Mortada Youssef, Hammoud Ahmad, Masoud Laith, Wyrzykowski Mateusz et al. (2025-02)
    3D Printable Ca(OH)2-Based Geopolymer Concrete with Steel Fiber Reinforcement
45. Sando Mona, Stephan Dietmar (2025-02)
    The Role of Mixing Sequence in Shaping the 3D-Printability of Geopolymers
46. Chen Wei, Guan Yongying, Zhu Binrong, Han Jinsheng et al. (2025-01)
    Influence of Extruded Strip-Shape and Dimension on the Mechanical Properties and Pore-Characteristics of 3D Printed Geopolymer Concrete
47. Liu Xinhao, Hu Jiajun, Guo Xiaolu (2025-01)
    Improved Interlayer-Bonding of 3D Printed Fiber-Reinforced Geopolymer by Healing-Agents:
    Properties, Mechanism, and Environmental Impacts
48. Tanyildizi Harun, Coskun Ahmet, Seloglu Maksut, Durmaz Taner (2025-01)
    Examination of Mechanical Properties of 3D Printed Geopolymer-Mortar Using the Taguchi -Method
49. Lori Ali, Mehrali Mehdi (2025-01)
    Filament-Geometry-Control of Printable Geopolymer Using Experimental and Data-Driven Approaches
50. Alam Shaurav, Gordon Stephen, Bassett Blake, Cobb Kevin et al. (2025-01)
    Three-Dimensional Printing of Fly-Ash-Based Geopolymer Materials
51. Sakhare Vishakha, Najar Mohamed, Deshpande Sachin (2024-12)
    Printing Performance of 3D Printed Geopolymer Through Pumpability, Extrudability, Buildability Properties:
    A Review
52. Yan Yufei, Zhang Mo, Ma Guowei, Sanjayan Jay (2024-12)
    An Eco-Friendly Ultra-High-Performance Geopolymer Concrete with Quaternary Binders for 3D Printing
53. Ali Md., Abilgaziyev Anuar, Temirzakuly Bakbergen, Kurokawa Syuhei (2024-12)
    Development of a Novel 3D Construction Printer for Consistent Buildability of Novel Geopolymer Mortar and Its Challenges
54. Sahoo Pitabash, Gupta Souradeep (2024-11)
    3D Printing with Geopolymer-Stabilized Excavated Earth:
    Enhancement of Printability and Engineering-Performance Through Controlled Retardation
55. Kozub Barbara, Sitarz Mateusz, Gądek Szymon, Ziejewska Celina et al. (2024-11)
    Upscaling of Copper Slag-Based Geopolymer to 3D Printing Technology
56. Lori Ali, Mehrali Mehdi (2024-11)
    Mechanical Properties and Crack-Deflection Mechanisms in 3D Printed Porous Geopolymers with Cellular Structures
57. Youssef Passant, Feky Muhammad, Ragab Ahmed, Serag Mohamed (2024-10)
    Geopolymer Composites for 3D Printing Applications:
    A Statistical Analysis Approach
58. Han Kang, Gu Fei, Yang Huashan, Tian Xinchen et al. (2024-09)
    PVA-Fiber-Reinforced Red Mud-Based Geopolymer for 3D Printing:
    Printability, Mechanical Properties and Microanalysis
59. Sheng Zhaoliang, Zhu Binrong, Cai Jingming, Han Jinsheng et al. (2024-09)
    Influence of Waste-Glass-Powder on Printability and Mechanical Properties of 3D Printing Geopolymer Concrete
60. Kondepudi Kala, Gomzyakov Albert, Liebscher Marco, Mechtcherine Viktor (2024-09)
    3D Printing by Selective Activation of Geopolymer-Based Binders
61. Lacambra-Andreu Xavier, Scheel Mario, Poulesquen Arnaud (2024-09)
    Enhancing 3D Printability of Metakaolin-Based Geopolymers for Nuclear Waste Filtration Applications
62. Kul Anil, Kocaer Öznur, Lucas Sandra (2024-09)
    Anisotropic Characteristics of 3D Printed Geopolymer Mortars from End-of-Life Materials of Construction Industry
63. Khokher Shawn, Sanguinetti Paola, Reilly Matthew (2024-09)
    Challenges in Enhancing Workability and Printability for 3D Printable Geopolymer Mortar
64. Perrot Arnaud, Jacquet Yohan, Caron Jean-François, Mesnil Romain et al. (2024-08)
    Snapshot on 3D Printing with Alternative Binders and Materials:
    Earth, Geopolymers, Gypsum and Low-Carbon Concrete
65. Tanyildizi Harun, Seloglu Maksut, Coskun Ahmet (2024-08)
    The Effect of Nano-Zinc-Oxide on Freeze-Thaw-Resistance of 3D Printed Geopolymer Mortars
66. Reddy B., Sameer Sk, Ramesh V., Sriya B. et al. (2024-08)
    Sustainable Development of 3D Printable Quaternary Geopolymer Concrete
67. Muthukrishnan Shravan, Ramakrishnan Sayanthan, Sanjayan Jay (2024-07)
    Set-on-Demand Geopolymer for Concrete 3D Printing Using Ternary Activator
68. Pasupathy Kirubajiny, Ramakrishnan Sayanthan, Mechtcherine Viktor, Sanjayan Jay (2024-07)
    Alkali-Activated Waste Glass-Based Geopolymer Concrete for Digital Construction
69. Barve Prasad, Bahrami Alireza, Shah Santosh (2024-07)
    A Comprehensive Review on Effects of Material-Composition, Mix-Design, and Mixing-Regimes on Rheology of 3D Printed Geopolymer Concrete
70. Sariyev Bakytzhan, Konysbekov Alisher, Jexembayeva Assel, Konkanov Marat (2024-07)
    A Comparative Study of the Rheological Properties of a Fly-Ash-Based Geopolymer Reinforced with PP-Fiber for 3D Printing:
    An Experimental and Numerical Approach
71. Krishna R., Rehman Asif, Mishra Jyotirmoy, Saha Suman et al. (2024-06)
    Additive Manufacturing of Geopolymer Composites for Sustainable Construction:
    Critical Factors, Advancements, Challenges, and Future Directions
72. Sando Mona, Stephan Dietmar (2024-06)
    The Development of a Fly-Ash-Based Geopolymer for Extrusion-Based 3D Printing, Along with a Printability Prediction Method
73. Masoud Laith, Hammoud Ahmad, Mortada Youssef, Masad Eyad (2024-06)
    Rheological, Mechanical, and Microscopic Properties of Polypropylene-Fiber-Reinforced Geopolymer Concrete for Additive Manufacturing
74. Zhou Zhijie, Geng Jian, Jin Chen, Liu Genjin et al. (2024-06)
    Influence of Residue Soil on the Properties of Fly-Ash-Slag-Based Geopolymer Materials for 3D Printing
75. Yan Yufei, Zhang Mo, Ma Guowei, Sanjayan Jay (2024-05)
    Enhancing Inter-Layer Bonding Strength of 3D Printed Ternary Geopolymer Using Calcium-Carbonate-Whiskers Spray
76. Shoaei Parham, Kjøniksen Anna-Lena, Pamies Ramón, Pilehvar Shima (2024-05)
    Characterization of 3D Printable Geopolymer Mortars:
    Effect of Binder Composition and Basalt-Fiber-Reinforcement
77. Ramakrishnan Sayanthan, Pasupathy Kirubajiny, Mechtcherine Viktor, Sanjayan Jay (2024-05)
    Print-Head Mixing of Geopolymer and OPC Slurries for Hybrid Alkali-Activated Cement in 3D Concrete Printing
78. Chen Yuxuan, Zhang Longfei, Wei Kai, Gao Huaxing et al. (2024-04)
    Rheology-Control and Shrinkage-Mitigation of 3D Printed Geopolymer Concrete Using Nano-Cellulose and Magnesium-Oxide
79. Youssef Passant, Feky Muhammad, Ragab Ahmed, Serag Mohamed (2024-04)
    Characterization of Geopolymer Composites for 3D Printing:
    A Microstructure Approach
80. Roux Charlotte, Archez Julien, Gall Corentin, Saadé Myriam et al. (2024-04)
    Towards Sustainable Material:
    Optimizing Geopolymer Mortar Formulations for 3D Printing
81. İlcan Hüseyin, Külak Adnan, Şahmaran Mustafa (2024-03)
    3D Printable Construction and Demolition Waste-Based Geopolymer:
    Investigating the Effects of Additives on Engineering Properties
82. Jaji Mustapha, Zijl Gideon, Babafemi Adewumi (2024-03)
    Durability and Pore-Structure of Metakaolin-Based 3D Printed Geopolymer Concrete
83. Sheng Zhaoliang, Zhu Binrong, Cai Jingming, Li Xuesen et al. (2024-03)
    Development of a Novel Extrusion-Device to Improve the Printability of 3D Printable Geopolymer Concrete
84. Liu Xinhao, Hu Jiajun, Guo Xiaolu (2024-03)
    Printability and Inter-Layer Bonding Property of 3D Printed Fiber-Reinforced Geopolymer
85. Ziada Mahmoud, Tanyildizi Harun, Seloglu Maksut, Coskun Ahmet (2024-02)
    Bacteria-Based Crack-Healing of 3D Printed PVA-Fiber-Reinforced Geopolymer Mortars
86. Zhang Hongmei, Hu Fan, Duan Yuanfeng, Liao Jian et al. (2024-02)
    Mechanical Properties and Micro-Structure of Highly Flowable Geopolymer Composites with Low-Content Polyvinyl-Alcohol-Fiber
87. Khan Shoukat, İlcan Hüseyin, Imram Ramsha, Aminipour Ehsan et al. (2024-01)
    The Impact of Nozzle-Diameter and Printing Speed on Geopolymer-Based 3D Printed Concrete Structures:
    Numerical Modeling and Experimental Validation
88. Chen Kailun, Liu Qiong, Chen Bing, Zhang Shishun et al. (2024-01)
    A Review on Effect of Raw Materials on the Performance of 3D Printed Geopolymer System for Construction
89. Li Feng, Zhang Rongrong, Zhou Siqi, Zhu Xingyi (2023-12)
    Printability and Hardening Performance of Three-Dimensionally-Printed Geopolymer Based on Lunar Regolith Simulant for Automated Construction of Lunar Infrastructure
90. Bedarf Patrick, Szabó Anna, Zanini Michele, Dillenburger Benjamin (2023-11)
    Robotic 3D Printing of Geopolymer Foam for Lightweight and Insulating Building Elements
91. Jaji Mustapha, Zijl Gideon, Babafemi Adewumi (2023-11)
    Slag-Modified Metakaolin-Based 3D Printed Geopolymer:
    Mechanical Characterisation, Microstructural Properties, and Nitrogen Physisorption Pore-Analysis
92. Shahmirzadi Mohsen, Gholampour Aliakbar, Kashani Alireza, Ngo Tuan (2023-10)
    Geopolymer Mortars for Use in Construction 3D Printing:
    Effect of LSS, Graphene-Oxide and Nano-Clay at Different Environmental Conditions
93. Chen Yuning, Xia Kailun, Jia Zijian, Gao Yueyi et al. (2023-10)
    Extending Applicability of 3D Printable Geopolymer to Large-Scale Printing Scenario via Combination of Sodium Carbonate and Nano-Silica
94. Muthukrishnan Shravan, Ramakrishnan Sayanthan, Sanjayan Jay (2023-09)
    Rapid Early-Age Strength Development of In-Line Activated Geopolymer for Concrete 3D Printing
95. Saadati Farzaneh, Kani Ebrahim (2023-09)
    Phosphorous Slag-Based Geopolymer Cement Incorporate with Mullite for 3D Printing Application
96. Bong Shin, Nematollahi Behzad, Mechtcherine Viktor, Li Victor et al. (2023-09)
    3D Printed Engineered, Strain-Hardening Geopolymer Composite as Permanent Formwork for Construction of Reinforced Concrete Beam
97. Özkılıç Hamza, İlcan Hüseyin, Aminipour Ehsan, Tuğluca Merve et al. (2023-08)
    Bond Properties and Anisotropy Performance of 3D Printed Construction and Demolition Waste-Based Geopolymers:
    Effect of Operational- and Material-Oriented Parameters
98. Shilar Fatheali, Ganachari Sharanabasava, Patil Veerabhadragouda, Bhojaraja B. et al. (2023-08)
    A Review of 3D Printing of Geopolymer Composites for Structural and Functional Applications
99. Jaji Mustapha, Zijl Gideon, Babafemi Adewumi (2023-08)
    Slag-Modified Fiber-Reinforced Metakaolin-Based Geopolymer for 3D Concrete Printing Application:
    Evaluating Fresh and Hardened Properties
100. Hájková P., Soukup A., Kohout J., Kohoutová E. et al. (2023-08)
     Geopolymers for 3D Print
101. Rahemipoor Sahand, Hasany Masoud, Mehrali Mohammad, Almdal Kristoffer et al. (2023-07)
     Phase-Change-Materials Incorporation into 3D Printed Geopolymer Cement:
     A Sustainable Approach to Enhance the Comfort and Energy Efficiency of Buildings
102. Jaji Mustapha, Kamoru A., Zijl Gideon, Babafemi Adewumi (2023-07)
     Effect of Anisotropy on Permeability Index and Water-Absorption of 3D Printed Metakaolin-Based Geopolymer Concrete
103. Mortada Youssef, Masad Eyad, Kogbara Reginald, Mansoor Bilal et al. (2023-06)
     Development of Ca(OH)2-Based Geopolymer for Additive Manufacturing Using Construction Wastes and Nano-Materials
104. Chen Wei, Pan Jinlong, Zhu Binrong, Ma XiaoMeng et al. (2023-06)
     Improving Mechanical Properties of 3D Printable One-Part Geopolymer Concrete with Steel-Fiber-Reinforcement
105. Paul Suvash, Basit Md, Hasan Noor, Dey Dhrutiman et al. (2023-04)
     3D Printing of Geopolymer Mortar:
     Overview of the Effect of Mix-Design and Printing Parameters on the Strength
106. Jaji Mustapha, Ibrahim Kamoru, Zijl Gideon, Babafemi Adewumi (2023-04)
     Thixotropic Characterisation of Slag-Modified 3D Printable Metakaolin-Based Geopolymer Composite
107. Ramezani Amir, Modaresi Shahriar, Dashti Pooria, Givkashi Mohammad et al. (2023-04)
     Effects of Different Types of Fibers on Fresh and Hardened Properties of Cement and Geopolymer-Based 3D Printed Mixtures:
     A Review
108. Tran Mien, Vu Tran, Nguyen Thi (2023-01)
     Simplified Assessment for One-Part 3D Printable Geopolymer Concrete Based on Slump and Slump-Flow Measurements
109. Pasupathy Kirubajiny, Ramakrishnan Sayanthan, Sanjayan Jay (2023-01)
     3D Concrete Printing of Eco-Friendly Geopolymer Containing Brick Waste
110. Noaimat Yazeed, Ghaffar Seyed, Chougan Mehdi, Kheetan Mazen (2022-12)
     A Review of 3D Printing Low-Carbon Concrete with One-Part Geopolymer:
     Engineering, Environmental and Economic Feasibility
111. Korniejenko Kinga, Setlak (nee Pławecka) Kinga, Kozub Barbara (2022-12)
     An Overview for Modern Energy-Efficient Solutions for Lunar and Martian Habitats Made Based on Geopolymers Composites and 3D Printing Technology
112. İlcan Hüseyin, Şahin Oğuzhan, Kul Anil, Ozcelikci Emircan et al. (2022-12)
     Rheological Property and Extrudability Performance-Assessment of Construction and Demolition Waste-Based Geopolymer Mortars with Varied Testing Protocols
113. Lv Chun, Shen Hongtao, Liu Jie, Wu Dan et al. (2022-11)
     Properties of 3D Printing Fiber-Reinforced Geopolymers Based on Inter-Layer Bonding and Anisotropy
114. Muthukrishnan Shravan, Ramakrishnan Sayanthan, Sanjayan Jay (2022-10)
     In-Line Activation of Geopolymer-Slurry for Concrete 3D Printing
115. Demiral Nazim, Ozkan Ekinci Mehmet, Şahin Oğuzhan, İlcan Hüseyin et al. (2022-10)
     Mechanical Anisotropy Evaluation and Bonding Properties of 3D Printable Construction and Demolition Waste-Based Geopolymer Mortars
116. Qaidi Shaker, Yahia Ammar, Tayeh B., Unis H. et al. (2022-10)
     3D Printed Geopolymer Composites:
     A Review
117. Chen Yuning, Zhang Yamei, Xie Yudong, Zhang Zedi et al. (2022-09)
     Unraveling Pore-Structure Alternations in 3D Printed Geopolymer Concrete and Corresponding Impacts on Macro-Properties
118. Jaji Mustapha, Zijl Gideon, Babafemi Adewumi (2022-09)
     Fresh Properties and Strength Evolution of Slag-Modified Fiber-Reinforced Metakaolin-Based Geopolymer Composite for 3D Concrete Printing Application
119. Marczyk Joanna, Ziejewska Celina, Korniejenko Kinga, Łach Michał et al. (2022-09)
     Properties of 3D Printed Concrete-Geopolymer Hybrids Reinforced with Aramid Roving
120. Mir Namra, Khan Shoukat, Kul Anil, Şahin Oğuzhan et al. (2022-08)
     Life Cycle Assessment of Construction and Demolition Waste-Based Geopolymers Suited for Use in 3D Additive Manufacturing
121. Raza Muhammad, Zhong Ray (2022-08)
     A Sustainable Roadmap for Additive Manufacturing Using Geopolymers in Construction Industry
122. Yoris-Nobile Adrian, Lizasoain-Arteaga Esther, Slebi-Acevedo Carlos, Blanco-Fernandez Elena et al. (2022-07)
     Life-Cycle-Assessment and Multi-Criteria Decision-Making-Analysis to Determine the Performance of 3D Printed Cement Mortars and Geopolymers
123. Bong Shin, Nematollahi Behzad, Nerella Venkatesh, Mechtcherine Viktor (2022-06)
     Properties of 3D Printable Ductile Fiber-Reinforced Geopolymer Composite
124. Kamakshi Tippabhotla, Subramaniam Kolluru (2022-06)
     Developing Printable Fly-Ash-Slag Geopolymer Binders with Rheology Modification
125. Ma Guowei, Yan Yufei, Zhang Mo, Sanjayan Jay (2022-05)
     Effect of Steel-Slag on 3D Concrete Printing of Geopolymer with Quaternary Binders
126. Ziejewska Celina, Marczyk Joanna, Korniejenko Kinga, Bednarz Sebastian et al. (2022-04)
     3D Printing of Concrete-Geopolymer Hybrids
127. Bong Shin, Nematollahi Behzad, Xia Ming, Ghaffar Seyed et al. (2022-04)
     Properties of Additively Manufactured Geopolymer Incorporating Mineral-Wollastonite-Micro-Fibers
128. İlcan Hüseyin, Şahin Oğuzhan, Kul Anil, Yıldırım Gürkan et al. (2022-03)
     Rheological Properties and Compressive Strength of Construction and Demolition Waste-Based Geopolymer Mortars for 3D Printing
129. Zhong Hui, Zhang Mingzhong (2022-02)
     3D Printing Geopolymers:
     A Review
130. Muthukrishnan Shravan, Ramakrishnan Sayanthan, Sanjayan Jay (2022-02)
     Set-on-Demand Geopolymer Using Print-Head Mixing for 3D Concrete Printing
131. Kocherla Amarteja, Kamakshi Tippabhotla, Subramaniam Kolluru (2021-11)
     In-Situ Embedded PZT Sensor for Monitoring 3D Concrete Printing:
     Application in Alkali-Activated Fly-Ash-Slag Geopolymers
132. Paiva Maria, Duarte Fonseca Rocha Larissa, Fernandez Letízia, Toledo Filho Romildo et al. (2021-11)
     Rheological Properties of Metakaolin-Based Geopolymers for Three-Dimensional Printing of Structures
133. Munir Qaisar, Peltonen Riku, Kärki Timo (2021-08)
     Printing Parameter Requirements for 3D Printable Geopolymer Materials Prepared from Industrial Side Streams
134. Şahin Oğuzhan, İlcan Hüseyin, Ateşli Anıl, Kul Anil et al. (2021-05)
     Construction and Demolition Waste-Based Geopolymers Suited for Use in 3D Additive Manufacturing
135. Bong Shin, Xia Ming, Nematollahi Behzad, Shi Caijun (2021-04)
     Ambient Temperature Cured ‘Just-Add-Water’ Geopolymer for 3D Concrete Printing Applications
136. Archez Julien, Maitenaz Sébastien, Demont Léo, Charrier Malo et al. (2021-02)
     Strategy to Shape, on a Half-Meter Scale, a Geopolymer Composite Structure by Additive Manufacturing
137. Voney Vera, Odaglia Pietro, Brumaud Coralie, Dillenburger Benjamin et al. (2021-02)
     From Casting to 3D Printing Geopolymers:
     A Proof of Concept
138. Guo Xiaolu, Yang Junyi, Xiong Guiyan (2020-09)
     Influence of Supplementary Cementitious Materials on Rheological Properties of 3D Printed Fly-Ash-Based Geopolymer
139. Muthukrishnan Shravan, Ramakrishnan Sayanthan, Sanjayan Jay (2020-09)
     Effect of Microwave-Heating on Inter-Layer Bonding and Buildability of Geopolymer 3D Concrete Printing
140. Archez Julien, Texier-Mandoki N., Bourbon X., Caron Jean-François et al. (2020-08)
     Adaptation of the Geopolymer Composite Formulation Binder to the Shaping Process
141. Bong Shin, Nematollahi Behzad, Arunothayan Arun, Xia Ming et al. (2020-07)
     Effect of Wollastonite Micro-Fiber Addition on Properties of 3D Printable ‘Just-Add-Water’ Geopolymers
142. Muthukrishnan Shravan, Ramakrishnan Sayanthan, Sanjayan Jay (2020-07)
     Buildability of Geopolymer Concrete for 3D Printing with Microwave-Heating
143. Nematollahi Behzad, Bong Shin, Xia Ming, Sanjayan Jay (2020-07)
     Digital Fabrication of ‘Just-Add-Water’ Geopolymers:
     Effects of Curing Condition and Print-Time Interval
144. Voney Vera, Odaglia Pietro, Brumaud Coralie, Dillenburger Benjamin et al. (2020-07)
     Geopolymer Formulation for Binder-Jet 3D Printing
145. Xia Ming, Nematollahi Behzad, Sanjayan Jay (2020-07)
     Shape Accuracy Evaluation of Geopolymer Specimens Made Using Particle-Bed 3D Printing
146. Chougan Mehdi, Ghaffar Seyed, Jahanzat Mohammad, Albar Abdulrahman et al. (2020-04)
     The Influence of Nano-Additives in Strengthening Mechanical Performance of 3D Printed Multi-Binder Geopolymer Composites
147. Li Zhijian, Wang Li, Ma Guowei (2020-01)
     Mechanical Improvement of Continuous Steel-Micro-Cable-Reinforced Geopolymer Composites for 3D Printing Subjected to Different Loading Conditions
148. Marczyk Joanna, Ziejewska Celina, Łach Michał, Korniejenko Kinga et al. (2019-11)
     Possibilities of Using the 3D Printing Process in the Concrete and Geopolymers Application
149. Korniejenko Kinga, Łach Michał, Chou S., Lin Wei-Ting et al. (2019-11)
     A Comparative Study of Mechanical Properties of Fly-Ash-Based Geopolymer Made by Casted and 3D Printing Methods
150. Bong Shin, Nematollahi Behzad, Xia Ming, Nazari Ali et al. (2019-09)
     Properties of 3D Printable Ductile Fiber-Reinforced Geopolymer Composite for Digital Construction Applications
151. Nematollahi Behzad, Xia Ming, Sanjayan Jay (2019-09)
     Enhancing Strength of Powder-Based 3D Printed Geopolymers for Digital Construction Applications
152. Panda Biranchi, Mohamed Nisar, Tan Ming (2019-09)
     Rheology and Structural Rebuilding of One-Part Geopolymer Mortar in the Context of 3D Concrete Printing
153. Panda Biranchi, Unluer Cise, Tan Ming (2019-08)
     Extrusion and Rheology Characterization of Geopolymer Nanocomposites Used in 3D Printing
154. Yao Yue, Hu Mingming, Maio Francesco, Cucurachi Stefano (2019-08)
     Life Cycle Assessment of 3D Printing Geopolymer Concrete:
     An Ex‐Ante Study
155. Nematollahi Behzad, Xia Ming, Sanjayan Jay (2019-07)
     Post-processing Methods to Improve Strength of Particle-Bed 3D Printed Geopolymer for Digital Construction Applications
156. Bong Shin, Nematollahi Behzad, Nazari Ali, Xia Ming et al. (2019-03)
     Method of Optimization for Ambient Temperature Cured Sustainable Geopolymers for 3D Printing Construction Applications
157. Nematollahi Behzad, Xia Ming, Vijay Praful, Sanjayan Jay (2019-02)
     Properties of Extrusion-Based 3D Printable Geopolymers for Digital Construction Applications
158. Xia Ming, Nematollahi Behzad, Sanjayan Jay (2019-02)
     Properties of Powder-Based 3D Printed Geopolymers
159. Xia Ming, Nematollahi Behzad, Sanjayan Jay (2019-02)
     Development of Powder-Based 3D Concrete Printing Using Geopolymers
160. Panda Biranchi, Bhagath Singh Gangapatnam, Unluer Cise, Tan Ming (2019-02)
     Synthesis and Characterization of One-Part Geopolymers for Extrusion-Based 3D Concrete Printing
161. Nematollahi Behzad, Vijay Praful, Sanjayan Jay, Nazari Ali et al. (2018-11)
     Effect of Polypropylene Fiber Addition on Properties of Geopolymers Made by 3D Printing for Digital Construction
162. Panda Biranchi, Unluer Cise, Tan Ming (2018-10)
     Investigation of the Rheology and Strength of Geopolymer Mixtures for Extrusion-Based 3D Printing
163. Ma Guowei, Li Zhijian, Wang Li, Bai Gang (2018-10)
     Micro-Cable-Reinforced Geopolymer Composite for Extrusion-Based 3D Printing
164. Bong Shin, Nematollahi Behzad, Nazari Ali, Xia Ming et al. (2018-09)
     Fresh and Hardened Properties of 3D Printable Geopolymer Cured in Ambient Temperature
165. Panda Biranchi, Mohamed Nisar, Tay Yi, Tan Ming (2018-09)
     Bond Strength in 3D Printed Geopolymer Mortar
166. Nematollahi Behzad, Xia Ming, Bong Shin, Sanjayan Jay (2018-09)
     Hardened Properties of 3D Printable One-Part Geopolymer for Construction Applications
167. Al-Qutaifi Sarah, Nazari Ali, Bagheri Ali (2018-07)
     Mechanical Properties of Layered Geopolymer Structures Applicable in Concrete 3D Printing
168. Lim Jian, Panda Biranchi, Pham Quang-Cuong (2018-05)
     Improving Flexural Characteristics of 3D Printed Geopolymer Composites with In-Process Steel-Cable-Reinforcement
169. Panda Biranchi, Mohamed Nisar, Tay Yi, He Lewei et al. (2018-05)
     Effects Of Slag Addition On Bond Strength Of 3D Printed Geopolymer Mortar:
     An Experimental Investigation
170. Panda Biranchi, Mohamed Nisar, Tan Ming (2018-04)
     Effect of 3D Printing on Mechanical Properties of Fly Ash-Based Inorganic Geopolymer
171. Panda Biranchi, Tan Ming (2018-03)
     Experimental Study on Mix Proportion and Fresh Properties of Fly-Ash-Based Geopolymer for 3D Concrete Printing
172. Panda Biranchi, Paul Suvash, Mohamed Nisar, Tay Yi et al. (2017-09)
     Measurement of Tensile Bond Strength of 3D Printed Geopolymer Mortar
173. Panda Biranchi, Paul Suvash, Lim Jian, Tay Yi et al. (2017-08)
     Additive Manufacturing of Geopolymer for Sustainable Built Environment
174. Kashani Alireza, Ngo Tuan (2017-07)
     Optimization of Mixture-Properties for 3D Printing of Geopolymer Concrete