Skip to content

#wall

Keywords by Co - Occurrence

  1. Bradford Katy, Gentry Russell, Kurtis Kimberly (2026-04)
    Embodied Carbon and Energy of Offsite 3D-Printed Concrete Walls
  2. Warsi Syed, Panda Biranchi, Biswas Pankaj (2026-04)
    3D Finite Element Analysis on the Effects of Boundary Elements Confinement on Cyclic Performance of 3D Printed Concrete Wall
  3. Wu Yiwen, Liu Chao, Liu Huawei, Pan Zhihong et al. (2026-03)
    Multiscale Mechanistic Insights into the Dual Effect of Interlayer Reinforcement on the Shear Behavior of 3D-Printed Concrete Composite Walls
  4. Pessoa Sofia, Lucas Sandra, Simões Nuno, Guimarães Ana (2026-03)
    Drying Process in a 3D-Printed Multilayer Wall System:
    An Experimental and Numerical Analysis
  5. Warsi Syed, Panda Biranchi, Biswas Pankaj, Chandra Borsaikia Arun (2026-03)
    Design of Earthquake-Resistant 3D Printed Concrete Walls:
    An Integrated Experimental-Numerical Framework for Predicting Cyclic Performance of Full-Scale Structural Building Based on Wall Testing
  6. Yousaf Arslan, Koç Muammer (2026-03)
    Bio-Inspired 4D Printing of Earthen Soil Composites for Structural Living Wall Applications
  7. Lunsford Caleb, Spencer Lawson, Shen Dongye, Genedy Moneeb et al. (2026-03)
    Effect of Toolpath Strategies on Anisotropy and Structural Performance of 3D Printed Concrete Gyroid Walls
  8. Mercimek Ömer, Akkaya Sercan, Bıçakçıoğlu Kaan, Çelik Alper et al. (2026-02)
    Diagonal Tension Testing of 3D Printed Concrete Walls:
    Benchmarking Against Conventional Masonry
  9. Dang Thi, Tran Mien, Nguyen Thi, Nguyen Hoang (2026-02)
    Large Scale 3D Printed Concrete Wall:
    Interlayer Bonding and Shrinkage
  10. Shen Jianyu, Cheng Yaofei, Xiao Jianzhuang, Wang Bo et al. (2026-01)
    Thermal and Mechanical Performance of 3D-Printed Excavated Soil Wall Solidified by Alkali-Activated Slag
  11. Bihari Ádám, Nemes Rita (2026-01)
    Investigation of Water Vapor Adsorption and Thermal Conductivity Properties of Stabilized Earth Mixtures for the Construction of 3D Printed Wall Structures
  12. Aghajani Delavar Mohammad, Sharma S., Chen H., Sideris Petros et al. (2026-01)
    Experimental Investigation on Full-Scale Shear-Critical 3D Printed Concrete Walls Subjected to In-Plane Cyclic Loading
  13. Norouzi Yasaman, Dixit Manish, Aryal Ashrant (2026-01)
    AI-Driven Prediction of Energy Consumption in a Building with 3D-Printed Wall Sections Through Geometric and Topological Design
  14. Rojas Jorge, Hasanzadeh Sogand (2026-01)
    Parametric Teleoperation of a Mobile Robot for Placing Printing Supports in 3D Printed Walls
  15. Kazemian Mona, Rogers Carl (2026-01)
    3D Printed Green Walls:
    Enhancing Living Systems Through Digital Fabrication
  16. Aden Abdishukri, Nuñez Montoya Alejandra, Ponce Josef, Rangel Bárbara et al. (2026-01)
    FAB-BIO:
    A Review of Bio-Based Materials Applied on 3D-Printed Living Walls
  17. Alvarez Eduardo, Curth Alexander, Mueller Caitlin, Norford Leslie (2026-01)
    Enhancing the Dynamic Thermal Performance of Wall Components Through Shape Optimization:
    Method and Application to Extruded Blocks and 3D-Printed Walls
  18. Fatima Warsi, Syed Bustan, Panda Biranchi, Biswas Pankaj (2025-12)
    Numerical Evaluation of the Seismic Performance of Self-Centering 3D Printed Concrete Wall
  19. Cárdenas Valeria, Vargas Juan, Fantucci Stefano (2025-12)
    Topological Optimization and Material Exploration for Improving the Thermal Performance of 3D Printed Prefabricated Wall Components
  20. Feliciano Renzo, Barrera Natalia, Lukyanenko Artyom, Rangel Bárbara et al. (2025-12)
    Sustainable Geometries:
    A Comparative Analysis of Thermal Performance in Uninsulated 3D Printed Concrete Wall Topologies
  21. Sifan Mohamed, Upasiri Irindu, Poologanathan Keerthan, Popo-Ola Sunday et al. (2025-12)
    Fire Performance and Design of LSF Wall Panels with 3D Printed Concrete and Steel Lipped Channel Sections
  22. Álvarez Luisa, Fernandez Brian, Saldarriaga Federico, Romero Héctor et al. (2025-11)
    Development and Bioclimatic Evaluation of Parametrically Designed Geometries for 3D-Printed Concrete Walls
  23. Geng Renyu, Jiang Jinming, Du Pengcong, Zhang Huiliang et al. (2025-11)
    Multiscale Thermal Optimization of 3D-Printed Walls:
    Integrating Structure, Material, and Process with Fire-Thermal Synergy
  24. Nguyen Trang, Park Jaejun, Kim Dong-Hyun (2025-11)
    Impacts of Infill Patterns and Curve Types in 3D Printed Clay Walls
  25. Tang Can, Zhou Yujie, Mehmood Awais, Rania Chlihi et al. (2025-11)
    A Novel 3D-Printed Negative Poisson's Ratio Grid-Reinforced Cement-Based Composite Wall Structure:
    Design, Fabrication, and Compressive Properties
  26. Kul Anil, Kocaer Öznur (2025-10)
    Parametric Analysis of Design and Operational Parameters in 3D Concrete Printing of Wall Elements
  27. Pal Abhipsa, Wan-Wendner Lin (2025-10)
    3D Concrete Printing and Infill Patterns of Energy Efficient Structural Wall Elements
  28. Apsari Auliagitta, Tambusay Asdam, Suprobo Priyo, Suryanto Benny (2025-10)
    Influence of Printing Speed and Nozzle Size on Buildability of 3D Printed Concrete Walls:
    A Nonlinear Finite Element Study
  29. Giulivo Marco, Capozzi Vittorio, Menna Costantino (2025-10)
    Experimental and Analytical Assessment of the in-Plane Behaviour of 3D Printed Concrete Walls Subjected to Cyclic Loads
  30. Dhanasekara Chamil, Tanapornraweekit Ganchai, Tangtermsirikul Somnuk, Seepim Sirakan et al. (2025-10)
    Investigation of Out-of-Plane Bending Behaviour of 3D-Printed Reinforced and Unreinforced Walls
  31. Li Zhengrong, Xing Wenjing, Sun Jingting (2025-09)
    Heat Transfer Calculation and Correction for 3D Printed Walls Incorporating Surface Geometry Effects
  32. Xie Xiangyu, Liu Xuemei, Zhang Nan, Zhang Lihai et al. (2025-09)
    Capillary Extrusion Rheometry for Characterising Wall Slip Behaviour in 3D Printed Concrete
  33. Tarhan İsmail, Tarhan Yeşim (2025-09)
    Nonlinear In-Plane Response of 3D-Printed Concrete Walls with Varied Infill Patterns:
    Experimental Mix Design and Numerical Structural Assessment
  34. Liu Ruiqing, Du Hongjian (2025-09)
    Optimizing Thermal Insulation Through Geometric Design:
    Comparative Analysis of Normal and Lightweight 3D Printed Concrete Wall Patterns
  35. Sikora Paweł, Skibicki Szymon, Bielawski Jakub, Techman Mateusz et al. (2025-09)
    Elevated Temperature Response and Fire Resistance Considerations of 3D-Printed Concrete:
    Small- to Medium-Scale Wall Experiments
  36. Chortis Alexandros, Gkountas Charalampos, Melidis Lazaros, Katakalos Konstantinos (2025-09)
    Seismic Performance Evaluation of 3D-Printed Concrete Walls Through Numerical Methods
  37. Daungwilailuk Totsawat, Pheinsusom Phoonsak, Pansuk Withit (2025-09)
    Behavior of 3D Printed Concrete Walls Exposed to High Temperatures
  38. Bradford Katy, Gentry Russell, Alon Lola, Kurtis Kimberly (2025-08)
    Construction 3D Printing Material Selection:
    Minimizing Cost and Carbon Footprint of Residential Wall Assemblies
  39. Mercimek Ömer, Şahin Oğuzhan, Çelik Alper, Ozkan Ekinci Mehmet et al. (2025-08)
    Structural Performance of Pre-Fabricated 3D Printed Concrete Walls:
    Effect of Cold Joint, Axial Load and Load Type
  40. İlerisoy Zeynep, Takva Çağatay, Top Semahat, Gökgöz Berru et al. (2025-08)
    The Effectiveness of 3D Concrete Printing Technology in Architectural Design:
    Different Corner-Wall Combinations in 3D Printed Elements and Geometric Form Configurations in Residential Buildings
  41. Pessoa Ana Sofia, Lucas Sandra, Simões Nuno, Guimarães Ana (2025-07)
    Heat Transfer in a 3D-Printed Multilayer Wall System:
    An Experimental and Numerical Analysis
  42. Hanifa Mohamad, Mendonça Paulo, Figueiredo Bruno, Mahdy Deena (2025-06)
    Experimental Study on the Thermal Performance of 3D-Printed Earthen Wall Segment with Optimized Infill Pattern
  43. Ribeiro João, Campos Tatiana, Brandão Filipe, Figueiredo Bruno et al. (2025-06)
    3DCP Composite Systems:
    Additive Manufacturing of a Concrete and Cellulose Interlocking Wall
  44. Kumar S., Muthu Nelson, Panda Biranchi (2025-06)
    Numerical Investigation of Structural Behavior of 3D-Printed Concrete Walls:
    Insights from Damage Mechanics and Cohesive Zone Approaches
  45. Warsi Syed, Panda Biranchi, Biswas Pankaj (2025-06)
    Design of Earthquake-Resistant 3D Printed Concrete Wall Based on ACI 318-19:
    Analytical Investigation and Numerical Modelling
  46. Khanverdi Mohsen, Das Sreekanta (2025-05)
    Performance of Full-Scale 3D-Printed Concrete Walls:
    Effects of Vertical Reinforcements and Window Opening
  47. Casanova Euro, Hidalgo Nelson, Valdebenito Michael, Forcael Eric et al. (2025-04)
    Overturning Resistance of Concrete Curved Walls Manufactured with Additive Construction
  48. Mansouri Abraham, Wolde Japi, Joda Akram (2025-03)
    The Potential of Sand as a Sustainable Infill for 3D Concrete Printed Building Walls
  49. Liu Chao, Liang Zhan, Liu Huawei, Wu Yiwen et al. (2025-03)
    Seismic Performance of 3D Printed Reinforced Concrete Walls:
    Experimental Study and Numerical Simulation
  50. Dey Dhrutiman, Panda Biranchi, Shukla Yash, Rawal Rajan (2025-03)
    A Comprehensive Assessment of Thermal Performance of 3D Printed Concrete Lattice Walls
  51. Suphunsaeng Kantawich, Prasittisopin Lapyote, Pethrung Sirichai, Pansuk Withit (2025-03)
    Fire Performance Evaluation of 3D-Printed Concrete Walls:
    A Combined Full-Scale and Numerical Modeling Approach
  52. Özalp Abdulkadir, Aldemir Alper (2025-03)
    Artificial Intelligence-Based Displacement Capacity Prediction Tool for Three-Dimensional Printed Concrete Walls
  53. Khanverdi Mohsen, Das Sreekanta (2025-03)
    Experimental Study on Water Penetration and Thermal Resistance of Large-Scale 3D-Printed Cementitious Walls
  54. Bayat Hamid, Kashani Alireza (2025-02)
    Reducing Material and Energy Consumption in Single-Story Buildings Through 3D-Printed Wall Designs
  55. Alós Shepherd David, Dehn Frank, Kuhn Alexander, Degen Robin et al. (2025-01)
    3D Concrete Printing of Solid Wall Cross-Sections with Truckmounted Concrete Pump:
    A Report on the First Printed Structure in Germany
  56. Wang Yibo, Yan Ming, Yang Kun, Ao Chenyang et al. (2025-01)
    Effect of Wall-Slip on the Extrusion-Characteristics of 3D Printing of Cementitious Materials
  57. Mohammed Arafat, Tamimi Adil, Abdwais Ahmed (2024-12)
    Structural Performance of 3D Concrete Printed Load-Bearing Walls
  58. Andrade Rodrigo, Mendoza Reales Oscar, Carvalho Gonzaga e Silva Ana, Fairbairn Eduardo et al. (2024-12)
    Thermal Behavior of Air-Fluid in Triangular Cavities of 3D Printed Concrete Walls
  59. Liu Huawei, Wang Yifei, Zhu Chao, Wu Yiwen et al. (2024-11)
    Design of 3D Printed Concrete Masonry for Wall Structures:
    Mechanical Behavior and Strength Calculation Methods Under Various Loads
  60. Warsi Syed, Panda Biranchi, Biswas Pankaj (2024-11)
    Structural Analysis of 3D Printed Concrete Walls Under Quasi-Static Cyclic Loading Using Composite Micro-Model
  61. Heinze Lisa, Liebringshausen Anne, Eversmann Philipp (2024-11)
    3D Printing with Wood Waste:
    Development of Reusable Printing Material Based on Waste Wood Particles and Its Digital Manufacturing Process for Wall Constructions in Architecture
  62. Mackin Anthony, Hanoun Zaid, Migliorino Jenna, Ahmed Aly et al. (2024-10)
    Multi-Functional Additively Constructed Honeycomb Walls for Housing and Sheltering
  63. Chamatete Kunda, Yalçınkaya Çağlar (2024-10)
    Numerical Assessment of Thermal Bridging Effects in 3D Printed Foam-Concrete Walls
  64. Aminpour Nima, Memari Ali (2024-10)
    Numerical and Experimental Study on Reinforced 3DCP Walls Filled with Lightweight Concrete
  65. Chen Baixi, Qian Xiaoping (2024-09)
    Data-Driven Reliability-Oriented Buildability-Analysis of 3D Concrete Printed Curved Wall
  66. Bhattacherjee Shantanu, Jain Smrati, Pratapa Phanisri, Santhanam Manu et al. (2024-09)
    Construction of Boundary Wall for an International Cricket Stadium in India:
    A Case Study
  67. Giulivo Marco, Menna Costantino, Capozzi Vittorio, Asprone Domenico (2024-09)
    Experimental Behavior of a 3D Printed Concrete Wall with Fixed Base Anchorage Subjected to In-Plane Cyclic Loads
  68. Warsi Syed, Panda Biranchi, Biswas Pankaj (2024-09)
    Effect of Strain-Hardening Material on Seismic-Performance of 3D Printed Concrete Wall:
    A Numerical Study
  69. Thiel Charlotte, Hechtl Christian, Gehlen Christoph, Kränkel Thomas (2024-09)
    Sustainability Potential of Additive Manufactured Concrete Structures:
    Studies on the Life Cycle Assessment and Circularity of an Extruded Exterior Wall
  70. Liu Ruiqing, Du Hongjian (2024-09)
    Improving Thermal Insulation Performance of 3D Printed Concrete Wall
  71. Jacquet Yohan, Perrot Arnaud (2024-09)
    Hygroscopic Insulation of Open Matrix Core Wall System as a Strategy to Enhance Buildability of 3D Printed Earth-Based Materials Structures
  72. Mohemmi Morteza, Sadeghian Vahid, Panda Biranchi, Boyle Sheryl (2024-09)
    Numerical Modeling of Lateral Resistance of 3D Printed Concrete Walls
  73. Dhanasekara Chamil, Tanapornraweekit Ganchai, Tangtermsirikul Somnuk, Jongvisuttisun Passarin et al. (2024-09)
    Uniaxial Compression on 3D Printed Load-Bearing Walls with Openings
  74. Mütevelli Özkan İffet, Aldemir Alper (2024-07)
    Machine-Learning Networks to Predict the Ultimate Axial Load and Displacement Capacity of 3D Printed Concrete Walls with Different Section Geometries
  75. Sadakorn Wannapol, Prasertsuk Santirak, Prasittisopin Lapyote (2024-06)
    Improving the Structural Efficiency of Textured Three-Dimensional Concrete Printing Wall by Architectural Design
  76. Ghaderi Ehsan, Evans Pete, Doyle Shelby, Senske Nick et al. (2024-05)
    Hygrothermal Behavior of 3D Concrete Printed Wall Assemblies
  77. Bayatkashkooli Samira, Amirsardari Anita, Rajeev Pathmanathan, Sanjayan Jay et al. (2024-05)
    Investigation of Axial Load Capacity of 3D Printed Concrete Wall
  78. Bayrak Alper, Shaban Nefize, Seyedian Choubi Sepehr, Tuncer Emran et al. (2024-05)
    Spatial Variation of Physical, Mechanical, and Thermophysical Properties of 3D Printed Concrete Across a Full-Scale Wall
  79. Xu Weishun, Jin Chenxi, Qian Xidong, Jin Zihao (2024-04)
    Mass-Customization of Integrated Green Wall Building Blocks through Clay Printing Formwork
  80. Darweesh Barrak, Rael Ronald (2024-04)
    From Walls to Roofs:
    Formwork-Free Robotic Earthen Vault Construction
  81. Chamatete Kunda, Yalçınkaya Çağlar (2024-03)
    Numerical Evaluation on Thermal Performance of 3D Printed Concrete Walls:
    The Effects of Lattice-Type, Filament-Width and Granular-Filling-Material
  82. Giudice Lorenzo, Katsamakas Antonios, Liu Bowen, Sarhosis Vasilis et al. (2024-02)
    Physical Modelling of Unreinforced Masonry Walls Using a Sand-Based 3D Printer
  83. Silveira Marcos, Wagner Juliana, Khanverdi Mohsen, Das Sreekanta (2024-02)
    Structural Performance of Large-Scale 3D Printed Walls Subjected to Axial Compression Load
  84. Delavar Mohammad, Chen H., Sideris Petros (2024-01)
    Analysis and Design of 3D Printed Reinforced Concrete Walls Under In-Plane Quasi-Static Loading
  85. Sedghi Reza, Rashidi Kourosh, Hojati Maryam (2024-01)
    Large-Scale 3D Wall Printing:
    From Concept to Reality
  86. Neri Manuela, Licciardello Lucia, Reggia Adriano, Pilotelli M. et al. (2024-01)
    Improving the Energy Performance of a 3D Printed Wall Using Recycled Material
  87. Yang Yan, Wu Hangzi, Han Lifang, Huang Qingling et al. (2023-12)
    Investigation on Geometric and Surface Finish Quality of 3D Concrete Printed Walls with Hollow Section
  88. Pessoa Ana Sofia, Jesus Manuel, Rangel Carolina, Guimarães Ana et al. (2023-12)
    Preliminary Study of the Application of Thermal Mortar in 3D Printed Concrete Walls
  89. Acuña Tomás, Avendaño Martín, García-Alvarado Rodrigo, Banda Pablo et al. (2023-12)
    Parametric Design of Multipurpose 3D Printed Walls Based on Roberto Matta´s Drawings
  90. Põldaru Mattias, Tammkõrv Karl, Tusik Tanel, Kiviste Mihkel et al. (2023-11)
    The Effect of Printing-Direction on the Strength Characteristics of a 3D Printed Concrete Wall-Section
  91. Vignesh B., Parthasarathi N. (2023-11)
    Analytical Study on 3D Printed Concrete Wall with Different Wall-Configurations When Exposed to High Temperature
  92. Fu Yanan, Zhang Ying, Wu Lei (2023-11)
    Experimental Study on Structural Performance of Cast-in-Place Frame Printed Concrete Wall
  93. Tamimi Adil, Hassan Habibelrahman, Rodriguez-Ubinas Edwin, Alhaidary Haidar et al. (2023-11)
    Thermal Performance of 3D Concrete Printed Walls:
    Calculated and In-Situ Measured U-Values
  94. Briels David, Renz Mauritz, Nouman Ahmad, Straßer Alexander et al. (2023-10)
    Monolithic AM Façade:
    Multi-Objective Parametric Design-Optimization of Additively Manufactured Insulating Wall Elements
  95. Lehr Leonard, Rasanani Mahdieh, Rasehorn Inken (2023-09)
    3D Concrete Printing of Wall Elements with Integrated Multifunctional Cavities
  96. Mawas Karam, Maboudi Mehdi, Gerke Markus (2023-09)
    Filament Extraction in 3D Printing of Shotcrete Walls from Terrestrial Laser Scanner Data
  97. Fragnito Andrea, Iasiello Marcello, Mauro Gerardo, Menna Costantino et al. (2023-08)
    Topology-Optimization to Design Innovative High Thermal Resistance 3D Printed Walls
  98. Ravula Risheek, Gatheeshgar Perampalam (2023-07)
    On the Thermal-Energy Performance of 3D Printed Concrete Wall Panels Designed with Varying Insulation Ratios
  99. Zhang Daobo, Feng Peng, Zhou Peizhao, Xu Weiguo et al. (2023-06)
    3D Printed Concrete Walls Reinforced with Flexible FRP Textile:
    Automatic Construction, Digital Rebuilding, and Seismic Performance
  100. Bello Nicholas, Memari Ali (2023-06)
    A Structural and Thermal Comparative Review of 3D Printed Wall Shapes
  101. Paudel Satish (2023-06)
    Investigation of Modelling Approaches to Study the Structural Performance of 3D Printed Plain Wall Under Uniform Axial Compression
  102. Fernandez Letízia, Caldas Lucas, Mendoza Reales Oscar (2023-05)
    Environmental Evaluation of 3D Printed Concrete Walls Considering the Life Cycle Perspective in the Context of Social Housing
  103. Chen Wei-Ting, Sunny Anthraper Liya, Skevaki Eleni, Reiter Lex et al. (2023-03)
    Imprinting Concrete Graded Transparency in 3D Concrete Printing Walls
  104. Cuevas Villalobos Karla, Strzałkowski Jarosław, Kim Ji-Su, Ehm Clemens et al. (2023-02)
    Towards Development of Sustainable Lightweight 3D Printed Wall Building Envelopes:
    Experimental and Numerical Studies
  105. Li Zhengrong, Xing Wenjing, Sun Jingting, Feng Xiwen (2022-12)
    Multi-Scale Structural Characteristics and Heat-Moisture Properties of 3D Printed Building Walls:
    A Review
  106. Zahrani Abdullah, Alghamdi Abdulrahman, Basalah Ahmad (2022-12)
    Computational Optimization of 3D Printed Concrete Walls for Improved Building Thermal Performance
  107. Sadakorn Wannapol, Prasertsuk Santirak, Prasittisopin Lapyote (2022-12)
    3D Cement Printing:
    DFMA Guideline of Patterned Load-Bearing Walls for Small Residential Units
  108. Tanapornraweekit Ganchai, Jiramarootapong Patiphat, Paudel Satish, Tangtermsirikul Somnuk et al. (2022-11)
    Experimental and Numerical Investigation of 3D Printed Mortar Walls Under Uniform Axial Compression
  109. García-Alvarado Rodrigo, Moroni-Orellana Ginnia, Banda Pablo (2022-10)
    Development of Variable Residential Buildings with 3D Printed Walls
  110. Mansouri Abraham, Binali Alreem, Aljawi Abdulla, Alhammadi Ahmed et al. (2022-10)
    Thermal Modeling of the Convective Heat-Transfer in the Large Air-Cavities of the 3D Concrete Printed Walls
  111. Šinka Māris, Spuriņa Ella, Korjakins Aleksandrs, Bajāre Diāna (2022-09)
    Hempcrete:
    CO2 Neutral Wall Solutions for 3D Printing
  112. Ren Chuangnan, Gao Baobin, Geng Chenhui, Zhu Wenjie (2022-09)
    Assembled Design and Compressive Performance Simulation of Mine Waterproof Wall Based on Concrete 3D Printing
  113. Licciardello Lucia, Reggia Adriano, Metelli Giovanni, Plizzari Giovanni (2022-09)
    Investigation of the Inter-Layer Strength of 3D Printed Concrete Shear Walls
  114. Briels David, Kollmannsberger Stefan, Leithner Felicitas, Matthäus Carla et al. (2022-07)
    Thermal Optimization of Additively Manufactured Lightweight Concrete Wall Elements with Internal Cellular Structure through Simulations and Measurements
  115. Mengesha Meron, Schmidt Albrecht, Göbel Luise, Lahmer Tom (2022-07)
    Numerical Modeling of 3D Concrete Printing Wall Structure to Reliably Estimate the Failure Mechanisms
  116. Delavar Mohammad, Chen Hao, Sideris Petros (2022-07)
    Design of 3D Printed Concrete Walls Under In-Plane Seismic Loading
  117. Bhattacherjee Shantanu, Jain Smrati, Santhanam Manu, Thiruvenkatamani G. (2022-06)
    Mechanical Properties and Failure-Pattern of 3D Printed Hollow Cylinders and Wall Segments under Uniaxial Loading
  118. Galeote Eduardo, Egea Carlos, Fuente Albert (2022-06)
    Characterisation and Modelling of a 3D Concrete Printed Wall under Flexure
  119. Mechtcherine Viktor, Taubert Markus, Müller Steffen, Will Frank et al. (2022-03)
    Additive Manufacturing of Monolithic, Steel-Reinforced Concrete Walls Using CONPrint3D-Reinforced Methods
  120. Suntharalingam Thadshajini, Upasiri Irindu, Nagaratnam Brabha, Poologanathan Keerthan et al. (2022-01)
    Finite Element Modelling to Predict the Fire Performance of Bio-Inspired 3D Printed Concrete Wall Panels Exposed to Realistic Fire
  121. Zhang Ying, Wan Zhiming, Wu Lei (2021-12)
    Study on Mechanical Properties of In-Situ Printed Reinforced Concrete Wall with Core Column
  122. Anton Ana-Maria, Reiter Lex, Skevaki Eleni (2021-11)
    Strategies for Integrating Straight Rebar in 3DCP Columns and Shear Walls
  123. Han Xiaoyu, Yan Jiachuan, Liu Mingjian, Huo Liang et al. (2021-10)
    Experimental Study on Large-Scale 3D Printed Concrete Walls Under Axial Compression
  124. Suntharalingam Thadshajini, Upasiri Irindu, Gatheeshgar Perampalam, Poologanathan Keerthan et al. (2021-09)
    Energy Performance of 3D Printed Concrete Walls:
    A Numerical Study
  125. Suntharalingam Thadshajini, Upasiri Irindu, Gatheeshgar Perampalam, Poologanathan Keerthan et al. (2021-07)
    Fire-Resistance of 3D Printed Concrete Composite Wall Panels Exposed to Various Fire Scenarios
  126. Karpova Ekaterina, Skripkiūnas Gintautas, Sedova Anastasiia, Tsimbalyuk Yelyzaveta (2021-07)
    Additive Manufacturing of Concrete Wall-Structures
  127. Mengesha Meron, Schmidt Albrecht, Göbel Luise, Lahmer Tom et al. (2021-06)
    Numerical Simulation for 3D Printed Wall Structure During the Process of Printing Considering Uncertainty
  128. Suntharalingam Thadshajini, Gatheeshgar Perampalam, Upasiri Irindu, Poologanathan Keerthan et al. (2021-06)
    Fire Performance of Innovative 3D Printed Concrete Composite Wall Panels:
    A Numerical Study
  129. Dielemans Gido, Briels David, Jaugstetter Fabian, Henke Klaudius et al. (2021-04)
    Additive Manufacturing of Thermally Enhanced Lightweight Concrete Wall Elements with Closed Cellular Structures
  130. Marais Hannelie, Christen Heidi, Cho Seung, Villiers Wibke et al. (2021-03)
    Computational Assessment of Thermal Performance of 3D Printed Concrete Wall Structures with Cavities
  131. Suntharalingam Thadshajini, Gatheeshgar Perampalam, Upasiri Irindu, Poologanathan Keerthan et al. (2021-02)
    Numerical Study of Fire and Energy Performance of Innovative Lightweight 3D Printed Concrete Wall-Configurations in Modular Building System
  132. Daungwilailuk Totsawat, Pheinsusom Phoonsak, Pansuk Withit (2021-01)
    Uniaxial Load Testing of Large-Scale 3D Printed Concrete Wall and Finite-Element-Model-Analysis
  133. Phadnis Kedar, Shariff Najeeb, Menon Devdas (2020-09)
    Optimal Rate of Printing of 3D Printed Concrete Columns and Walls to Avoid Buckling
  134. Wang Shian, Liu Chi, Zhang Guo, Luo Qi et al. (2020-08)
    Digital Planting:
    Fabrication of Integrated Concrete Green Wall via Additive Manufacturing
  135. Jiramarootapong Patiphat, Prasittisopin Lapyote, Snguanyat Chalermwut, Tanapornraweekit Ganchai et al. (2020-07)
    Load Carrying Capacity and Failure Mode of 3D Printing Mortar Wall Panel Under Axial Compression Loading
  136. Prasittisopin Lapyote, Pongpaisanseree Kittisak, Jiramarootapong Patiphat, Snguanyat Chalermwut (2020-07)
    Thermal- and Sound-Insulation of Large-Scale 3D Extrusion-Printing Wall-Panel
  137. He Yawen, Zhang Yamei, Zhang Chao, Zhou Hongyu (2020-05)
    Energy-Saving-Potential of 3D Printed Concrete Building with Integrated Living Wall
  138. Hoffmann Marcin, Skibicki Szymon, Pankratow Paweł, Zieliński Adam et al. (2020-04)
    Automation in the Construction of a 3D Printed Concrete Wall with the Use of a Lintel Gripper
  139. Kontovourkis Odysseas, Tryfonos George (2019-11)
    Robotic 3D Clay Printing of Prefabricated Non-Conventional Wall Components Based on a Parametric-Integrated Design
  140. Dörfler Kathrin, Hack Norman, Sandy Timothy, Giftthaler Markus et al. (2019-09)
    Mobile Robotic Fabrication Beyond Factory Conditions:
    Case Study Mesh Mould Wall of the DFAB HOUSE
  141. Geneidy Omar, Ismaeel Walaa, Abbas Ayman (2019-04)
    A Critical Review for Applying Three-Dimensional Concrete Wall Printing Technology in Egypt
  142. Furet Benoît, Poullain Philippe, Garnier Sébastien (2019-04)
    3D Printing for Construction Based on a Complex Wall of Polymer-Foam and Concrete
  143. Kaszyńska Maria, Olczyk Norbert, Techman Mateusz, Skibicki Szymon et al. (2019-02)
    Thermal-Humidity Parameters of 3D Printed Wall
  144. Prasittisopin Lapyote, Taweekarn Naphat, Chuaysiri Chanita, Snguanyat Chalermwut (2018-11)
    Printing and Fabrication Processes of Curvature Single-Layered Wall House Printed by 3D Extrusion-Printer
  145. Duballet Romain, Baverel Olivier, Dirrenberger Justin (2018-11)
    Space-Truss-Masonry-Walls with Robotic Mortar-Extrusion
  146. Soto Borja, Agustí-Juan Isolda, Hunhevicz Jens, Joss Samuel et al. (2018-05)
    Productivity of Digital Fabrication in Construction:
    Cost and Time-Analysis of a Robotically Built Wall
  147. Burroughs Jedadiah, Johnson Carol, Chaar Ghassan, Banko Marion et al. (2018-04)
    Automated Construction with Concrete:
    Response of Wall- and Beam-Sections to Blast-Loads
  148. Suiker Akke (2018-01)
    Mechanical Performance of Wall Structures in 3D Printing Processes:
    Theory, Design Tools and Experiments
  149. Duballet Romain, Baverel Olivier, Dirrenberger Justin (2017-09)
    Design of Space-Truss-Based Insulating Walls for Robotic Fabrication in Concrete
  150. Agustí-Juan Isolda, Müller Florian, Hack Norman, Wangler Timothy et al. (2017-04)
    Potential Benefits of Digital Fabrication for Complex Structures:
    Environmental Assessment of a Robotically Fabricated Concrete Wall
  151. Michel Matthias, Knaack Ulrich (2014-12)
    Fundamentals of Development for Adaptive Formwork for Free Formed Concrete Shells and Walls
  152. Hwang Dooil, Khoshnevis Behrokh (2004-09)
    Concrete Wall Fabrication by Contour Crafting