Skip to content

#engineered

Keywords by Co - Occurrence

  1. Nguyen Vuong, Jie Cheah, Lao Junying, Huanyu Zhao et al. (2026-01)
    Performance of Lightweight, Reinforced, and Assemblable 3D-Printed Concrete Columns with Low-Carbon Engineered Cementitious Composites
  2. Cheng Jianhua, Chen Meng, Ge Yulin, Zhang Tong (2025-12)
    Mechanical Behavior and Damage Evolution of 3D-Printed Engineered Cementitious Composites at Elevated Temperatures:
    Insights from Acoustic Emission Characterization
  3. Xu Fengming, Yu Jie, Teng Fei, Lin Xiaoshan et al. (2025-12)
    Application of Recycled Tile as Internal Curing Material in 3D-Printed Engineered Cementitious Composites
  4. Cheng Zhangqi, Li Keyan, Liu Renlong (2025-12)
    Sustainable 3D Printed Engineered Cementitious Composites Incorporating Recycled Ceramic Materials:
    Rheology and Mechanical Behavior
  5. Öztürk Ece, Ince Ceren, Borgianni Yuri, Nicolaides Demetris et al. (2025-12)
    Printability, Engineering Properties and Environmental Implications of 3D-Printed Cementitious Mortars Incorporating Hydrated Lime, Tile Powder and Accelerator
  6. Tulliani Jean-Marc (2025-11)
    Latest Developments in 3D-Printed Engineered Cementitious Composites:
    Technologies, Prospects, and Challenges
  7. Raza Ali, Tan Binglin, Jiajia Zhou, Umar Muhammad et al. (2025-11)
    Evaluation of Mechanical and Microstructural Properties of Sustainable 3D-Printed Engineered Cementitious Composites Incorporating Hybrid PE/PVA Fibers and Yellow River Sand
  8. Zhao Yu, Shen Guanghai, Zhu Lingli, Ding Yahong et al. (2025-11)
    Multi-Scale Analysis of 3D Printable High-Strength Engineered Cementitious Composite with Carbon and Polyethylene Fibers:
    Rheology, Printability and Hydration Kinetics in Structural Components
  9. Cheng Zhangqi, Zhou Lu, Jia Xiangxi, Liu Renlong (2025-10)
    Experimental Study on Crack Development and Fracture Performance of 3D Printed Green Engineered Cementitious Composites
  10. Wang Yuting, Chen Meng, Zhang Tong, Zhang Mingzhong (2025-10)
    Influence of Limestone Calcined Clay on the Mechanical Behaviour of 3D Printed Engineered Cementitious Composites
  11. Raza Ali, Yuan Chengfang (2025-10)
    Degradation Mechanisms and Microstructural Performance of 3D-Printed Engineered Cementitious Composites with Yellow River Sand Under Chloride Ion Wet-Dry Cycles
  12. Piechówka-Mielnik Magdalena, Bednarz Łukasz, Krupa Michał, Wojciechowska Gabriela et al. (2025-09)
    Sustainable Development in Building Engineering:
    Hempcrete in 3D Printing Technology
  13. Lopes de Aquino Brasil Alexander, Carmo Pena (2025-09)
    A Systematic Review of Robotic Additive Manufacturing Applications in Architecture, Engineering, and Construction
  14. Chen Wenguang, Liang Long, Ye Junhong, Liu Lingfei et al. (2025-09)
    Machine Learning-Enabled Performance-Based Design of Three-Dimensional Printed Engineered Cementitious Composites
  15. Liao Minmao, Gerong Wangdui, Wang Pengfei, Chen Zhaohui (2025-08)
    Determination of Elastic Engineering Constants in an Orthotropic Constitutive Model for Hardened 3D-Printed Concrete
  16. Lyu Libo, Li Weihong, Deng Yongjie, Yu Qiuchun et al. (2025-08)
    Engineering Properties of Magnesium Phosphate Cement Lunar Soil Concrete Under Vacuum Conditions and Its 3D Printing Application for Lunar Dome Model
  17. Panchal Priyanka, Choi Myoungsung (2025-07)
    A Review on Effect of Natural Fibers to Mitigate CO2 Footprint and Enhance Engineering Properties of 3D Printing Concrete
  18. Lu Chenyu, Sun Dongpu, Shen Qiang, Zhang Zhigang et al. (2025-07)
    Buildability of 3D Printing Engineered Cementitious Composites (ECC):
    A Comprehensive Assessment Framework Under Laboratory Conditions
  19. Dong Liang, Wu Chengqing, Liu Zhongxian, Wu Pengtao et al. (2025-07)
    Chloride Transport Anisotropy and Interfacial Degradation in 3D-Printed Ultra-High-Performance Concrete:
    Multi-Scale Evaluation and Engineering Implications
  20. Zafar Tayyab, Zafar Muhammad, Hojati Maryam (2025-07)
    Exploring the 3D Printability of Engineered Cementitious Composites with Internal Curing for Resilient Construction in Arid Regions
  21. Rousan Rajai, Alnemrawi Bara'a, Abdalla Khairedin, Alhassan Mohammad et al. (2025-06)
    The Flexural Behavior of Engineered Cementitious Composites (ECC) One-Way 3D Printed Slabs Made of Solid and Hollow Sections
  22. Ye Huzi, He Qianpeng, Ping Pengxin, Pan Jinlong et al. (2025-06)
    Anisotropic Flexural Behavior and Energy Absorption of 3D Printed Engineered Cementitious Composites (3DP-ECC) Beams Under Low-Velocity Impact
  23. Gupta Souradeep, Sahana C., Soda Prabhath, Dwivedi Ashutosh (2025-06)
    Development of Carbon Sequestering 3D-Printable Stabilized Earth Materials:
    Investigation into Engineering Performance and Resistance Against Acid Attack
  24. Chen Meng, Sun Hao, Wang Yuting, Zhang Tong (2025-05)
    Relationship Between Interfacial Pore Structure and Anisotropic Dynamic Splitting Behaviour of 3D Printed Engineered Cementitious Composites
  25. Raza Ali, Junjie Zhang, Fan Jiahui, Umar Muhammad et al. (2025-05)
    Comprehensive Study on the Microstructural and Mechanical Performance of 3D-Printed Engineered Cementitious Composites with Yellow River Sand Integration
  26. Yue Hongzhe, Wang Qian, Zhao Zixuan, Lai Sha et al. (2025-04)
    Interactions Between BIM and Robotics:
    Towards Intelligent Construction Engineering and Management
  27. Zhou Wen, Xu Yading, Meng Zhaozheng, Xie Jinbao et al. (2025-03)
    Filament Stitching:
    An Architected Printing Strategy to Mitigate Anisotropy in 3D-Printed Engineered Cementitious Composites
  28. Chen Meng, Cheng Jianhua, Zhang Tong, Wang Yuting (2025-03)
    Experimental Characterization and Constitutive Modelling of the Anisotropic Dynamic Compressive Behavior of 3D Printed Engineered Cementitious Composites
  29. Zhu Binrong, Zhang Yuhang, Ye Huzi, Wei Yang et al. (2025-03)
    Low-Velocity Impact Performance of Biomimetic 3D Printed Engineered Cementitious Composites Beams
  30. Gardan Julien, Hedjazi Lofti, Attajer Ali (2025-02)
    Additive Manufacturing in Construction:
    State of the Art and Emerging Trends in Civil Engineering
  31. Bakhshi Amir, Zafar Muhammad, Hojati Maryam (2025-02)
    A Study on Achieving High Tensile Ductility in 3D-Printable Engineered Cementitious Composites Reinforced with 8mm Fibers
  32. Chen Wenguang, Liang Long, Zhou Boyang, Ye Junhong et al. (2025-02)
    A Fracture Mechanics Model for Predicting Tensile Strength and Fracture Toughness of 3D Printed Engineered Cementitious Composites
  33. Chen Meng, Yu Kanghao, Zhang Tong, Wang Yuting (2025-01)
    Characterizing and Modelling the Bond-Slip-Behavior of Steel-Bars in 3D Printed Engineered Cementitious Composites
  34. Yu Jie, Teng Fei, Ye Junhong, Zhang Dong et al. (2025-01)
    Size-Dependent Model to Predict the Flexural-Strength of 3D Printed Engineered Cementitious Composites Beams
  35. Yu Jie, Xu Fengming, Zhang Hanghua, Ye Junhong et al. (2025-01)
    Leveraging Incinerator Bottom Ash for Mitigating Early-Age Shrinkage in 3D Printed Engineered Cementitious Composites
  36. Bai Meiyan, Xiao Jianzhuang, Ding Tao, Yu Kequan (2024-12)
    Interfacial Bond-Properties Between 3D Printed Engineered Cementitious Composite and Post-Cast Concrete
  37. Khan Mirza, Ahmed Aayzaz, Ali Tariq, Qureshi Muhammad et al. (2024-12)
    Comprehensive Review of 3D Printed Concrete, Life Cycle Assessment, AI and ML Models:
    Materials, Engineered Properties and Techniques for Additive Manufacturing
  38. Ge Yali, Yao Jie (2024-11)
    Influence of FA and HPMC on the Fresh Properties and Anisotropy of 3D Printing Engineered Cementitious Composites
  39. Sahoo Pitabash, Gupta Souradeep (2024-11)
    3D Printing with Geopolymer-Stabilized Excavated Earth:
    Enhancement of Printability and Engineering-Performance Through Controlled Retardation
  40. Demont Léo, Bono Victor, Ducoulombier Nicolas, Mesnil Romain et al. (2024-11)
    Anisotropic Concrete:
    A Composite Look on the Engineering and Architecture of Concrete Construction
  41. Kruger Jacques, Zijl Gideon (2024-11)
    A Structural Engineering Perspective on Extrusion-Based 3D Concrete Printing:
    From Green to Solid State
  42. Lin Manfang, Li Lingzhi, Jiang Fangming, Ding Yao et al. (2024-11)
    Automated Reinforcement of 3D Printed Engineered Cementitious Composite Beams
  43. Ding Yao, Ou Xingjian, Qi Hongtuo, Xiong Gang et al. (2024-10)
    Inter-Layer Bonding Performance of 3D Printed Engineered Cementitious Composites:
    Rheological Regulation and Fiber Hybridization
  44. Chougan Mehdi, Skibicki Szymon, Noaimat Yazeed, Federowicz Karol et al. (2024-09)
    Comparative Analysis of Ternary Blended Cement with Clay and Engineering-Brick-Aggregate for High-Performance 3D Printing
  45. Yang Min, Yao Xiaofei, Zhao Liguo, Zhang Yamei et al. (2024-09)
    Bridging Ancient Artistry and Modern Engineering:
    A 3D Printed Concrete Arch Bridge Inspired by Millennium-Old Bronze Patterns Using an Integrated Concrete 3D Printing System
  46. Nana W., Dell’Endice Alessandro, Bhooshan Vishu, Zhou Fulei et al. (2024-09)
    Decarbonizing Concrete Construction:
    Case of the Phoenix 3D Printed Footbridge and Learnings for Engineering and Architecture
  47. Zhou Wen, Xu Yading, Šavija Branko, McGee Wesley et al. (2024-09)
    Stitching Engineered Cementitious Composites (ECC ):
    Unraveling Anisotropy Challenges Through Architectured 3D Printing Path Design
  48. Ding Yao, Liu Jiepeng, Ou Xingjian, Nishiwaki Tomoya et al. (2024-08)
    3D Printing Hybrid-Fiber-Reinforced Engineered Cementitious Composites:
    Feasibility in Long-Open-Time Applications
  49. Sahana C., Soda Prabhath, Dwivedi Ashutosh, Kumar Sandeep et al. (2024-07)
    3D Printing with Stabilized Earth:
    Material-Development and Effect of Carbon-Sequestration on Engineering-Performance
  50. Asghari Y., Mohammadyan-Yasouj S., Petrů M., Ghandvar H. et al. (2024-07)
    3D Printing and Implementation of Engineered Cementitious Composites:
    A Review
  51. Wang Yuting, Chen Meng, Zhang Tong, Zhang Mingzhong (2024-07)
    Hardening Properties and Microstructure of 3D Printed Engineered Cementitious Composites Based on Limestone-Calcined-Clay-Cement
  52. Ye Junhong, Zhuang Zicheng, Teng Fei, Yu Jie et al. (2024-07)
    Comparative Environmental-Assessment of 3D Concrete Printing with Engineered Cementitious Composites
  53. Yan Kang-Tai, Wang Xian-Peng, Ding Yao, Li Lingzhi et al. (2024-06)
    3D Printed LC3-Based Lightweight Engineered Cementitious Composites:
    Fresh State, Hardened Material-Properties and Beam-Performance
  54. Chen Wenguang, Ye Junhong, Jiang Fangming, Fediuk Roman et al. (2024-05)
    Printability Region for 3D Printable Engineered Cementitious Composites
  55. Sarker Mohiuddin, Rahmadan Md, Abedin Mohammad (2024-05)
    Engineered Cementitious Composites:
    Design, Structural and 3D Printing Applications
  56. Los Angeles Ortega Rosario Maria, Medina Melany, Duque Rafael, Alberto Jaén Ortega Antonio et al. (2024-05)
    Advancing Sustainable Construction:
    Insights into Clay-Based Additive Manufacturing for Architecture, Engineering, and Construction
  57. Yan Kang-Tai, Li Lingzhi, Ye Junhong, Bazarov Dilshod et al. (2024-05)
    Anisotropic Size-Effect of 3D Printed LC3-Based Engineered Cementitious Composites
  58. Anandaraj S., Sowmya S., Krishnaraja A., Mithun T. (2024-03)
    Development of Green Engineered Cementitious Composite Using Fly-Ash and Nano-Silica for 3D Printing
  59. İlcan Hüseyin, Külak Adnan, Şahmaran Mustafa (2024-03)
    3D Printable Construction and Demolition Waste-Based Geopolymer:
    Investigating the Effects of Additives on Engineering Properties
  60. Chen Meng, Fang Shuai, Wang Guangquan, Xuan Yiwei et al. (2024-03)
    Compressive and Flexural Behavior of Engineered Cementitious Composites-Based Auxetic Structures:
    An Experimental and Numerical Study
  61. Gou Hongxiang, Sofi Massoud, Zhang Zipeng, Zhu Mintao et al. (2024-03)
    Combined Printable and Mechanical Analysis of 3D Printed Green High-Strength, Lightweight Engineered Cementitious Composites
  62. Lai Xin, Gong Chen, He Enpei, Li Yinmian et al. (2024-02)
    Deep Learning for Predicting the Strength of 3D Printable Engineered Cementitious Composites
  63. Vigneshwari Are, Jayaprakash Jaganathan (2024-02)
    A Review on 3D Printable Cementitious Material Containing Copper and Iron-Ore-Tailings:
    Material-Characterization, Activation-Methods, Engineering-Properties, Durability, and Microstructure-Behavior
  64. Zhou Wen, Zhu He, Hu Wei-Hsiu, Wollaston Ryan et al. (2024-02)
    Low-Carbon, Expansive Engineered Cementitious Composites (ECC) In the Context of 3D Printing
  65. Buson Márcio, Varum Humberto, Rezende Marco (2024-01)
    First Impressions on Three-Dimensional Printing with Earth-Based Mortar at the Faculty of Engineering of the University of Porto
  66. Pi Yilin, Lu Cong, Yao Yiming, Li Baoshan (2024-01)
    A Rheological-Based Printability-Assessment Method for 3D Printing Engineered Cementitious Composites Considering Fiber-Dispersion
  67. Xiao Jianzhuang, Bai Meiyan, Wu Yuching, Duan Zhenhua et al. (2024-01)
    Inter-Layer Bonding Strength and Pore Characteristics of 3D Printed Engineered Cementitious Composites
  68. Ye Junhong, Zhang Jiangdi, Yu Jie, Yu Jiangtao et al. (2023-11)
    Flexural Behaviors of 3D Printed Lightweight Engineered Cementitious Composites (ECC) Slab with Hollow Sections
  69. Ye Junhong, Yang Minxin, Yu Jiangtao, Dai Yecheng et al. (2023-10)
    Size-Effect on Flexural and Fracture Behaviors of 3D Printed Engineered Cementitious Composites:
    Experimental and Numerical Studies
  70. Pi Yilin, Lu Cong, Li Baoshan, Zhou Junhui (2023-10)
    Crack Propagation and Failure Mechanism of 3D Printing Engineered Cementitious Composites (3DP-ECC) Under Bending Loads
  71. Akman Arabella, Sadhu Ayan (2023-10)
    Recent Development of 3D Printing Technology in Construction Engineering
  72. Zafar Muhammad, Bakhshi Amir, Hojati Maryam (2023-10)
    Printability and Shape Fidelity Evaluation of Self-Reinforced Engineered Cementitious Composites
  73. Zhu Lingli, Yao Jie, Zhao Yu, Ruan Wenqiang et al. (2023-09)
    Printability and Early Mechanical Properties of Material-Composition Modified 3D Printing Engineered Cementitious Composites Based on the Response-Surface-Methodology
  74. Bong Shin, Nematollahi Behzad, Mechtcherine Viktor, Li Victor et al. (2023-09)
    3D Printed Engineered, Strain-Hardening Geopolymer Composite as Permanent Formwork for Construction of Reinforced Concrete Beam
  75. Luo Fuming, Cui Peng, Tang Wei, Wu Chun-ran et al. (2023-09)
    Influences of Engineering Spoil on the Properties and Microstructure of 3D Printable Magnesium-Cement
  76. Ye Junhong, Teng Fei, Yu Jie, Yu Shiwei et al. (2023-08)
    Development of 3D Printable Engineered Cementitious Composites with Incineration-Bottom-Ash for Sustainable and Digital Construction
  77. Zhou Wen, McGee Wesley, Gökçe H., Li Victor (2023-08)
    A Bio-Inspired Solution to Alleviate Anisotropy of 3D Printed Engineered Cementitious Composites (3DP-ECC):
    Knitting/Tilting Filaments
  78. Dell’Endice Alessandro, Bouten Sam, Mele Tom, Block Philippe (2023-07)
    Structural Design and Engineering of Striatus, an Unreinforced 3D Concrete Printed Masonry Arch Bridge
  79. Cabibihan John-John, Gaballa Aya, Fadli Fodil, Irshidat Mohammad et al. (2023-06)
    A Guided Approach for Utilizing Concrete Robotic 3D Printing for the Architecture, Engineering, and Construction Industry
  80. Bai Meiyan, Wu Yuching, Xiao Jianzhuang, Ding Tao et al. (2023-04)
    Workability and Hardened Properties of 3D Printed Engineered Cementitious Composites Incorporating Recycled Sand and PE-Fibers
  81. Fischer Oliver, Bos Freek (2023-04)
    Additive Manufacturing in Concrete Construction:
    Ways to Implement It in Engineering Practice
  82. Prasad Kudrekodlu, Vasugi V., Senthil Kumaran G. (2023-02)
    Application of 3D Printing Concepts in the Architecture Engineering and Construction Industry:
    A Scientometric Review
  83. Pang Zhiming, Lu Cong, Li Baoshan, Wang Jiajie (2023-02)
    A Multi-Scale Model for Quantifying Fiber-Orientation Effects on the Tensile Properties of 3D Printed Engineered Cementitious Composites
  84. Zhu Lingli, Yao Jie, Zhao Yu, Ruan Wenqiang et al. (2022-12)
    Effects of Composite Cementation System on Rheological and Working Performances of Fresh 3D Printable Engineered Cementitious Composites
  85. Noaimat Yazeed, Ghaffar Seyed, Chougan Mehdi, Kheetan Mazen (2022-12)
    A Review of 3D Printing Low-Carbon Concrete with One-Part Geopolymer:
    Engineering, Environmental and Economic Feasibility
  86. Game Daniel, Giwa Ilerioluwa, Ahmed Hassan, Noorvand Hassan et al. (2022-09)
    Development of Ultra-High-Performance Engineered Cementitious Composites for 3D Printing Applications
  87. Zafar Muhammad, Bakhshi Amir, Hojati Maryam (2022-09)
    Toward 3D Printable Engineered Cementitious Composites:
    Mix-Design Proportioning, Flowability, and Mechanical Performance
  88. Zhou Wen, McGee Wesley, Zhu He, Gökçe H. et al. (2022-08)
    Time-Dependent Fresh Properties Characterization of 3D Printing Engineered Cementitious Composites:
    On the Evaluation of Buildability
  89. Zhu Binrong, Pan Jinlong, Li Junrui, Wang Penghui et al. (2022-07)
    Relationship Between Microstructure and Strain-Hardening Behavior of 3D Printed Engineered Cementitious Composites
  90. Aslani Farhad, Dale Ryan, Hamidi Fatemeh, Valizadeh Afsaneh (2022-05)
    Mechanical and Shrinkage Performance of 3D Printed Rubberised Engineered Cementitious Composites
  91. Zhou Wen, Zhang Yamei, Ma Lei, Li Victor (2022-04)
    Influence of Printing Parameters on 3D Printing Engineered Cementitious Composites
  92. Wangler Timothy, Pileggi Rafael, Gürel Şeyma, Flatt Robert (2022-03)
    A Chemical Process Engineering Look at Digital Concrete Processes:
    Critical Step Design, In-Line Mixing, and Scale-Up
  93. Qi Li-gang, Bai Jie, Huang Qing-long, Yang Yan et al. (2022-03)
    Mobile 3D Printing-Techniques for Construction Engineering:
    Outdoor Navigation and Printing Quality-Control
  94. Ali Md., Issayev Gani, Shehab Essam, Sarfraz Shoaib (2022-02)
    A Critical Review of 3D Printing and Digital Manufacturing in Construction Engineering
  95. Zhu He, Yu Kequan, McGee Wesley, Ng Tsz et al. (2021-11)
    Limestone-Calcined-Clay-Cement for Three-Dimensional Printed Engineered Cementitious Composites
  96. Ranaudo Francesco, Mele Tom, Block Philippe (2021-09)
    A Low-Carbon, Funicular Concrete Floor System:
    Design and Engineering of the HiLo Floor
  97. Ge Zhi, Tawfek Abdullah, Zhang Hongzhi, Yang Yongwei et al. (2021-09)
    Influence of an Extrusion-Approach on the Fiber-Orientation and Mechanical Properties of Engineering Cementitious Composite
  98. Zhang Yifan, Aslani Farhad (2021-08)
    Development of Fiber-Reinforced Engineered Cementitious Composite Using Polyvinyl-Alcohol-Fiber and Activated Carbon-Powder for 3D Concrete Printing
  99. Guimarães Ana, Delgado João, Lucas Sandra (2021-07)
    Advanced Manufacturing in Civil Engineering
  100. Perrot Arnaud, Pierre Alexandre, Nerella Venkatesh, Wolfs Robert et al. (2021-07)
    From Analytical Methods to Numerical Simulations:
    A Process Engineering Toolbox for 3D Concrete Printing
  101. Sun Junbo, Aslani Farhad, Lu Jenny, Wang Lining et al. (2021-06)
    Fiber-Reinforced Lightweight Engineered Cementitious Composites for 3D Concrete Printing
  102. Bakhshi Amir, Sedghi Reza, Hojati Maryam (2021-06)
    A Preliminary Study on the Mix-Design of 3D Printable Engineered Cementitious Composite
  103. Zhu Binrong, Pan Jinlong, Zhou Zhenxin, Cai Jingming (2021-04)
    Mechanical Properties of Engineered Cementitious Composites Beams Fabricated by Extrusion-Based 3D
  104. Yu Kequan, McGee Wesley, Ng Tsz, Zhu He et al. (2021-02)
    3D Printable Engineered Cementitious Composites:
    Fresh and Hardened Properties
  105. McGee Wesley, Ng Tsz, Yu Kequan, Li Victor (2020-07)
    Extrusion Nozzle Shaping for Improved 3DP of Engineered Cementitious Composites (ECC-SHCC)
  106. Menna Costantino, Mata-Falcón Jaime, Bos Freek, Vantyghem Gieljan et al. (2020-04)
    Opportunities and Challenges for Structural Engineering of Digitally Fabricated Concrete
  107. Li Victor, Bos Freek, Yu Kequan, McGee Wesley et al. (2020-04)
    On the Emergence of 3D Printable Engineered, Strain-Hardening Cementitious Composites
  108. Celorrio-Barragué Luis, Calvo-Simón Sergio, Gaspar Marcelo, Vidal-Cortés Mariano et al. (2019-10)
    3D Printed Models-Based Lab Activities to Enhance Learning-Teaching Processes in Structural Engineering Courses
  109. Zhu Binrong, Pan Jinlong, Nematollahi Behzad, Zhou Zhenxin et al. (2019-07)
    Development of 3D Printable Engineered Cementitious Composites with Ultra-High Tensile Ductility for Digital Construction
  110. Tan Kang (2018-09)
    The Framework of Combining Artificial Intelligence and Construction 3D Printing in Civil Engineering
  111. Bao Yi, Xu Mingfeng, Soltan Daniel, Xia Tian et al. (2018-09)
    Three-Dimensional Printing Multifunctional Engineered Cementitious Composites (ECC) for Structural Elements
  112. Hillegas James, Liu Rui, Liu Bosheng, Sanchez Alex et al. (2018-07)
    Engineering Properties Influencing Clayey Materials for Additive Manufacturing
  113. Salet Theo, Bos Freek, Wolfs Robert, Ahmed Zeeshan (2017-06)
    3D Concrete Printing:
    A Structural Engineering Perspective