Skip to content

#containment

Keywords by Co - Occurrence

  1. Nermend Loran, Skibicki Szymon, Techman Mateusz, Federowicz Karol et al. (2025-12)
    Electrical Resistivity and Elevated Temperature Performance of 3D Printed Concrete Containing Nanosized Radiation Shielding Admixtures
  2. Sikora Paweł, Federowicz Karol, Skibicki Szymon, Techman Mateusz et al. (2025-11)
    Demonstration of 3D-Printed Concrete Containing Fine Recycled Concrete Aggregates and Recycled Concrete Powder:
    Rheology, Early-Age, Shrinkage, Mechanical, and Durability Performance.
  3. Givkashi Mohammad (2025-11)
    Durability of 3D Printed Concrete Containing Air-Entraining Agent:
    Evaluating the Importance of Carbonation Resistance
  4. Sakolaree Natthanicha, Taweesint Jutamas, Sungsiri Krisana, Assawamankongcharoen Sirikamol et al. (2025-11)
    Evaluation of Fresh and Mechanical Properties and Shrinkage of Hydrophobic Mortar Containing Microfiber for 3D Printing Technology
  5. Lyu Ping, Wang Kejin, Doyle Shelby, Laflamme Simon et al. (2025-10)
    Green 3D Printing Concrete Containing Biochar and Waste Wind Turbine Blade Powder
  6. Gencel Osman, Nodehi Mehrab, Subaşı Serkan, Ustaoğlu Abid et al. (2025-09)
    Properties of 3D Printed Concrete Containing Microencapsulated Phase Change Material
  7. Mim Nusrat, Hosan Anwar, Shaikh Faiz, Sarker Prabir (2025-07)
    Rheological and Early Age Mechanical Properties of 3D Printed Concrete Containing Copper Heap Leach Residue as Fine Aggregate
  8. Noaimat Yazeed, Chougan Mehdi, Sambucci Matteo, Valente Marco et al. (2025-06)
    Optimising Limestone Calcined Clay Cement Containing Excavated Low-Grade Waste Clay for 3D Printing Applications
  9. Ye Chengjie, Xu Jie, Lacidogna Giuseppe (2025-06)
    Fracture Behavior of 3D Printed Geopolymer Concrete Containing Waste Ceramic
  10. Pereira Carolina, Vieira Henrique, Gonçalves Nuno, Ascensão Guilherme et al. (2025-05)
    Innovative Waste-Containing 3D-Printed Geopolymer Structures for Enhanced Acoustic Comfort in Built Environments
  11. Yuan Yong, Sheng Ruyi, Yao Xupeng, Pichler Bernhard et al. (2025-03)
    A Three-Step Development Strategy for 3D Printable Concrete Containing Coarse Aggregates
  12. Teng Fei, Xu Fengming, Yang Minxin, Yu Jie et al. (2025-02)
    Development of Sustainable Strain-Hardening Cementitious Composites Containing Diatomite for 3D Printing
  13. Şahin Hatice, Akarsu Özenç Aliye, Saka Dinç Zaide, Mardani Ali et al. (2024-11)
    Investigation of Fresh and Hardened Properties of 3D Printable Concrete Containing Ozone-Modified Carbon-Fiber
  14. Wang Xianggang, Dong Enlai, Jia Zijian, Jia Lutao et al. (2024-09)
    Specimen-Size-Effect on Compressive Strength of 3D Printed Concrete Containing Coarse Aggregate with Varying Water-to-Binder-Ratios
  15. Sapata Alise, Šinka Māris, Šahmenko Genādijs, Bajāre Diāna et al. (2024-09)
    Development of 3D Printable Cement-Based Composite Containing Oil Shale Ash
  16. Givkashi Mohammad, Moodi Faramarz, Ramezanianpour Amir (2024-08)
    Effect of Pumping Process on the Properties of 3D Printed Concrete Containing Air-Entraining-Agent
  17. Zhang Yiyuan, Lesage Karel, Zhang Yi, Tao Yaxin et al. (2024-07)
    Effect of Magnetic Intervention-Time on the Buildability of Printable Cement and Limestone-Pastes Containing Fe3O4-Particles
  18. Peng Yiming, Unluer Cise (2024-06)
    Performance and Microstructural Development of 3D Printable MgO-SiO2 Mixes Containing Magnesium-Silicate-Monohydrate
  19. Muy Yeakleang, Courard Luc, Garnavault Xavier, Bulteel David et al. (2024-06)
    Mechanical Properties and Freezing and Thawing Behavior of 3D Printing Concrete Containing Recycled Fine Aggregates from Construction and Demolition Waste
  20. Sun Junbo, Liu Shukui, Ma Zhangguo, Wang Di et al. (2024-03)
    3D Printed Lightweight Concrete Containing Surface-Pretreated Coal-Gangue
  21. Vigneshwari Are, Jayaprakash Jaganathan (2024-02)
    A Review on 3D Printable Cementitious Material Containing Copper and Iron-Ore-Tailings:
    Material-Characterization, Activation-Methods, Engineering-Properties, Durability, and Microstructure-Behavior
  22. Zhou Longfei, Gou Mifeng, Ji Jiankai, Hou Xinran et al. (2024-02)
    Durability and Hardened Properties of 3D Printed Concrete Containing Bauxite-Tailings
  23. Azimi Zahir, Mousavi Moein, Bengar Habib, Javadi Akbar (2023-12)
    Study on the Post-Fire Mechanical Properties of Lightweight 3D Printed Concrete Containing Expanded Perlite as Partial Replacement of Natural Sand
  24. Bayat Hamid, Kashani Alireza (2023-09)
    Analysis of Rheological Properties and Printability of a 3D Printing Mortar Containing Silica-Fume, Hydrated Lime, and Blast-Furnace-Slag
  25. Federowicz Karol, Techman Mateusz, Skibicki Szymon, Chougan Mehdi et al. (2023-08)
    Development of 3D Printed Heavyweight Concrete Containing Magnetite-Aggregate
  26. Pietras Daniel, Zbyszyński Wojciech, Sadowski Tomasz (2023-06)
    A 3D Printing Method of Cement-Based FGM Composites Containing Granulated Cork, Polypropylene Fibers, and a Polyethylene Net Inter-Layer
  27. Rahmat N., Ali Noorwirdawati, Abdullah Siti, Abdul Hamid Noor et al. (2023-06)
    Fresh Properties and Flexural Strength of 3D Printing Sustainable Concrete Containing GGBS as Partial Cement Replacement
  28. Sun Guangcheng, Wang Zhiguang, Yu Chengkun, Qian Xiaoqian et al. (2023-05)
    Properties and Microstructures of 3D Printable Sulphoaluminate-Cement Concrete Containing Industrial Byproducts and Nano-Clay
  29. Simedru Alexandru, Becze Anca, Cadar Oana, Scurtu Daniela et al. (2023-04)
    Structural Characterization of Several Cement-Based Materials Containing Chemical Additives with Potential Application in Additive Manufacturing
  30. Qu Zhengyao, Yu Qingliang, Ong Ghim, Cardinaels Ruth et al. (2023-04)
    3D Printing Concrete Containing Thermal Responsive Gelatin:
    Towards Cold Environment Applications
  31. Malipeddi Reshma, Adiseshu S. (2023-01)
    Impact of Unique Mixing Methodology on Macro and Microstructural Characteristics of Concrete Containing Slag and Fly-Ash
  32. Pasupathy Kirubajiny, Ramakrishnan Sayanthan, Sanjayan Jay (2023-01)
    3D Concrete Printing of Eco-Friendly Geopolymer Containing Brick Waste
  33. Bhattacherjee Shantanu, Jain Smrati, Santhanam Manu (2022-11)
    Criticality of Binder-Aggregate Interaction for Buildability of 3D Printed Concrete Containing Limestone-Calcined-Clay
  34. Che Yujun, Yang Huashan (2022-10)
    Hydration Products, Pore-Structure, and Compressive Strength of Extrusion-Based 3D Printed Cement-Pastes Containing Nano-Calcium-Carbonate
  35. Miao Haibin, Guo Chao, Lu Zhengran, Chen Zhihua (2022-10)
    3D Meso-Scale-Analysis of Concrete Containing Defect Damages During Different Freeze-Thaw-Cycles
  36. Liu Junli, Tran Jonathan (2022-09)
    Experimental Study on 3D-Printed Cementitious Materials Containing Surface-Modified Recycled Crumb-Rubber
  37. Dey Dhrutiman, Srinivas Dodda, Boddepalli Uday, Panda Biranchi et al. (2022-09)
    3D Printability of Ternary-Portland-Cement Mixes Containing Fly-Ash and Limestone
  38. Kaushik Sandipan, Sonebi Mohammed, Amato Giuseppina, Perrot Arnaud et al. (2022-08)
    Investigation of Fresh Properties of 3D Concrete Printing Containing Nano-Clay in Forms of Suspension and Powder
  39. Pasupathy Kirubajiny, Ramakrishnan Sayanthan, Sanjayan Jay (2022-06)
    Fresh and Hardened Properties of 3D Printable Foam-Concrete Containing Porous Aggregates
  40. Jacquet Yohan, Perrot Arnaud, Picandet Vincent (2022-06)
    Monitoring Strain Using Digital Image Correlation During Compressive and Tensile Loading:
    Assessment of Critical Strain of Cement-Based Materials Containing VMA
  41. Abdalqader Ahmed, Sonebi Mohammed, Dedenis Marie, Amziane Sofiane et al. (2022-06)
    Mechanical Performance of 3D Printed Concrete Containing Fly-Ash, Metakaolin and Nano-Clay
  42. Ghantous Rita, Valadez-Carranza Yvette, Reese Steven, Weiss William (2022-06)
    Drying Behavior of 3D Printed Cementitious Pastes Containing Cellulose-Nano-Crystals
  43. Chen Mingxu, Li Haisheng, Yang Lei, Wang Shoude et al. (2022-03)
    Rheology and Shape-Stability-Control of 3D Printed Calcium-Sulphoaluminate-Cement Composites Containing Paper-Milling-Sludge
  44. Shao Lijing, Feng Pan, Zuo Wenqiang, Wang Haochuan et al. (2022-02)
    A Novel Method for Improving the Printability of Cement-Based Materials:
    Controlling the Releasing of Capsules Containing Chemical Admixtures
  45. Wang Xiangyu, Khalil Abdullah, Celik Kemal (2021-11)
    Three-Dimensional Printability of White-Portland-Cement Containing Ceno-Spheres
  46. Wi Kwangwoo, Wang Kejin, Taylor Peter, Laflamme Simon et al. (2021-09)
    Properties and Microstructure of Extrusion-Based 3D Printing Mortar Containing a Highly Flowable, Rapid Set Grout
  47. Rehman Asif, Sglavo Vincenzo (2021-08)
    3D Printing of Portland-Cement-Containing Bodies
  48. Yang Huashan, Che Yujun, Shi Mengyuan (2021-07)
    Influences of Calcium-Carbonate-Nano-Particles on the Workability and Strength of 3D Printing Cementitious Materials Containing Limestone-Powder
  49. Bai Gang, Wang Li, Ma Guowei, Sanjayan Jay et al. (2021-03)
    3D Printing Eco-Friendly Concrete Containing Under-Utilised and Waste Solids as Aggregates
  50. Yang Huashan, Li Weiwei, Che Yujun (2020-08)
    3D Printing Cementitious Materials Containing Nano-CaCO3:
    Workability, Strength, and Microstructure
  51. Muthukrishnan Shravan, Kua Harn, Yu Ling, Chung Jacky (2020-05)
    Fresh Properties of Cementitious Materials Containing Rice-Husk-Ash for Construction 3D Printing
  52. Rahul Attupurathu, Santhanam Manu (2020-02)
    Evaluating the Printability of Concretes Containing Lightweight Coarse Aggregates
  53. Long Wujian, Tao Jie-Lin, Lin Can, Gu Yucun et al. (2019-08)
    Rheology and Buildability of Sustainable Cement-Based Composites Containing Micro-Crystalline Cellulose for 3D Printing
  54. Panda Biranchi, Tan Ming (2018-11)
    Rheological Behavior of High-Volume Fly-Ash Mixtures Containing Micro-Silica for Digital Construction Application
  55. Ma Guowei, Sun Junbo, Wang Li, Aslani Farhad et al. (2018-09)
    Electromagnetic and Microwave-Absorbing Properties of Cementitious Composite for 3D Printing Containing Waste Copper Solids
  56. Ma Guowei, Li Zhijian, Wang Li (2017-12)
    Printable Properties of Cementitious Material Containing Copper-Tailings for Extrusion-Based 3D Printing