Skip to content

#nozzle

Keywords by Co - Occurrence

  1. Maurya Shubham, Panda Biranchi, Dixit Uday (2026-03)
    Experimental Study on Void Reduction and Bonding Behavior in 3D Concrete Printing with a Trowel-Integrated Nozzle
  2. Wang Qingwei, Pan Jinlong, Han Song, Zhu Binrong et al. (2026-03)
    Effects of Nozzle Height on the Layer Deposition Process and Forming Performance of 3D Printing Concrete:
    Evidence from Experiments and CFD Simulations
  3. Jiang Youbau, Zhang Zupan, Wen Jun, Gao Pengxiang et al. (2026-03)
    Toothed Nozzle Optimization for Enhancement of Interlayer Tensile Strength of 3D-Printed Concrete with CTGAN and XGBoost Model
  4. Cheng Shengbo, Grimm Benedikt, Unterreiner Michael, Hechtl Christian et al. (2026-03)
    Properties of the Transition Region in 3D Printed Functionally Graded Concrete Through Near Nozzle Binder-Aggregate Mixing
  5. Zhang Lianzhi, Li Xiao, Lin Lin, Ren Changzai et al. (2026-02)
    Analytical and Experimental Study on Fluid–Solid Coupling of Variable-Caliber Nozzles for Concrete 3D Printing
  6. Ding Tao, Lian Hongqian (2026-01)
    Buildability Analysis of 3D Concrete Printing:
    A Finite Element Model Incorporating Segment-by-Segment Activation, Nozzle Constraint, and Extrusion Pressure
  7. Sun Yan, Du Guoqiang, Deng Xiaowei, Qian Ye (2026-01)
    Enhancing Fiber Alignment and Tensile Properties of 3D-Printed Ultra-High Performance Strain-Hardening Cementitious Composites by Nozzle Channel Design
  8. Song Qiang, Zhou Guangyu, Bao Hailing, Liu Qiong (2025-11)
    Study on the Effects of Nozzle Proximal Carbonation Mixing and Vacuum Dewatering on the Printability and Mechanical Properties of the 3D Printed Construction Mortar
  9. Niu Huaxian, Yu Bo, Hao Ji (2025-10)
    CFD-Based Flow Field Analysis of Spiral Nozzles in 3D Concrete Printing
  10. Apsari Auliagitta, Tambusay Asdam, Suprobo Priyo, Suryanto Benny (2025-10)
    Influence of Printing Speed and Nozzle Size on Buildability of 3D Printed Concrete Walls:
    A Nonlinear Finite Element Study
  11. Yamakawa Soji, Vazquez-Santiago Kyshalee, Xia Yixuan, Ogura Hiroki et al. (2025-09)
    Concrete Spray 3D Printing Simulator for Nozzle Trajectory Planning
  12. Maurya Shubham, Kumar Vijay, Panda Biranchi, Borsaikia Arun et al. (2025-09)
    Inline Polymer Cable Reinforcement in 3D Concrete Printing with a Special Nozzle
  13. Kumar Rohan, Das Nabodyuti, Nanthagopalan Prakash (2025-08)
    Novel Interlocking Nozzle Geometry for Enhanced Interlayer Strengthening in 3D Concrete Printing
  14. Wang Suguo, Wang Xing, Yan Xueyuan, Chen Shanghong (2025-08)
    Effects of Aggregate Size and Nozzle Diameter on Printability and Mechanical Properties of 3D Printed Ferronickel Slag-GGBFS Concrete
  15. Khare Karan, Khan Subim, Lal Dhirajkumar, Sonawane Pavankumar et al. (2025-07)
    Design and Development of a Nozzle Assembly for 3D Concrete Printing Applications
  16. Irshidat Mohammad, Amjad Umar, Kumar Kishor, John John et al. (2025-06)
    Significance of Nozzle Parameters for 3D Printing of Concrete
  17. Sun Yan, Du Guoqiang, Deng Xiaowei, Qian Ye (2025-06)
    Effects of Nozzle Thickness on the Mechanical Properties of 3D Printable Ultra-High Performance Strain-Hardening Cementitious Composites (UHP-SHCC)
  18. Salaimanimagudam M., Jayaprakash Jaganathan (2025-04)
    Effect of Nozzle Stand-Off Distance, Printing Interval, and Inclusion of Glass Fiber Mesh Reinforcement in 3D Printed Concrete
  19. Yang Kun, Yuan Jingbo, Wang Yibo, Yang Fan et al. (2025-03)
    Optimization of 3D Printing Nozzle Structure and the Influence of Process Parameters on the Forming Performance of Underwater Concrete
  20. Jiang Youbau, Liu Yan, Zhang Zupan, Gao Pengxiang et al. (2025-03)
    Tensile Performance of Interlayer Interface of Interlocking 3D Printed Concrete with Single Toothlike Nozzle
  21. Olivo Nik, Piccioni Valeria, Milano Francesco, Gramazio Fabio et al. (2025-02)
    Thermal Enhancement of Hollow-Core 3DP Through Nozzle Design Customization
  22. Jiang Youbau, Gao Pengxiang, Adhikari Sondipon, Yao Xiaofei et al. (2024-12)
    Studies on the Mechanical Properties of Inter-Layer Interlocking 3D Printed Concrete Based on a Novel Nozzle
  23. Kumar Lalit, Dey Dhrutiman, Panda Biranchi, Muthu Nelson (2024-12)
    Influence of the Nozzle Geometry on Mechanical Properties of 3D Printed Concrete:
    Experiment and Finite Element Study
  24. Flor Juncal Luis, Loporcaro Giuseppe, Scott Allan, Clucas Don (2024-10)
    Influence of Printing-Parameters on the Durability of 3D Printed Limestone-Calcined-Clay-Cement Mortar:
    Overlap Between Filaments and Nozzle-Offset
  25. Straßer Alexander, Haynack Alexander, Kränkel Thomas, Gehlen Christoph (2024-09)
    Additive Manufacturing by the Selective Paste-Intrusion:
    Effect of the Distance of the Print Nozzle to the Particle-Bed on the Print Quality
  26. Rehman Atta, Kang Seungwoo, Kim Jung-Hoon (2024-09)
    Nozzle-Integrated Slump-Scanner-Test:
    Development of an Automated Shape-Stability and Instantaneous Yield-Stress-Measurement-Method for the Set-on-Demand 3D Concrete Printing
  27. Barry Mamadou, Jacquet Yohan, Kachkouch Fatima, Perrot Arnaud (2024-09)
    Instrumentation of the Extruder Nozzle Using Load Cells:
    Towards an In-Line Quality-Control Device for 3D Printed Cement-Based Materials
  28. Muy Yeakleang, Courard Luc, Bulteel David, Rémond Sébastien et al. (2024-09)
    Influence of Nozzle-Diameter on the Anisotropy of Compressive Strength:
    Measured on 3D Printing Concrete Designed with Recycled Fine Aggregates
  29. Zhang Nan, Sanjayan Jay (2024-09)
    Rheological Modifiers in Optimizing Quick Nozzle Mixing Technology for 3D Concrete Printing
  30. Disu Oluwatimilehin, Ismail Sikiru, Wood Luke, Chrysanthou Andreas et al. (2024-08)
    Design and Development of a Small-Scale Cement-Based 3D Printing Robot Extrusion Nozzle
  31. Zhang Nan, Sanjayan Jay (2024-07)
    Pumping-Less 3D Concrete Printing Using Quick Nozzle Mixing
  32. Shen Jing, Li Yujia, Zhang Xiaoman, Li Yangbo et al. (2024-06)
    Three-Dimensional Printable Concrete by an Ultra-Thin Nozzle and Fully-Sealed Extrusion
  33. Shahzad Qamar, Abbas Nadeem, Akbar Muhammad, Sabi Ehab et al. (2024-03)
    Influence of Print-Speed and Nozzle-Diameter on the Fiber-Alignment in 3D Printed Ultra-High-Performance Concrete
  34. Zhang Hanghua, Tan Yanke, Hao Lucen, Zheng Shipeng et al. (2024-02)
    Intelligent Real-Time Quality-Control for 3D Printed Concrete with Near-Nozzle Secondary-Mixing
  35. Khan Shoukat, İlcan Hüseyin, Imram Ramsha, Aminipour Ehsan et al. (2024-01)
    The Impact of Nozzle-Diameter and Printing Speed on Geopolymer-Based 3D Printed Concrete Structures:
    Numerical Modeling and Experimental Validation
  36. Zhang Nan, Sanjayan Jay (2024-01)
    Quick Nozzle Mixing Technology for 3D Printing Foam-Concrete
  37. Hechtl Christian, Kränkel Thomas, Gehlen Christoph (2023-12)
    Near‐Nozzle Mixing for Additive Manufacturing of Cementitious Mortar:
    A Homogeneity Study
  38. Freund Niklas, David Martin, Böhler David, Mai (née Dressler) Inka et al. (2023-12)
    Shotcrete 3D Printing:
    Interaction of Nozzle Geometry, Homogeneity and Hardened Concrete Properties
  39. David Martin, Freund Niklas, Dröder Klaus, Lowke Dirk (2023-09)
    The Effects of Nozzle-Diameter and Length on the Resulting Strand Properties for Shotcrete 3D Printing
  40. Zhang Nan, Sanjayan Jay (2023-08)
    Surfactants to Enable Quick Nozzle Mixing in 3D Concrete Printing
  41. Zhang Nan, Sanjayan Jay (2023-01)
    Extrusion Nozzle Design and Print Parameter Selections for 3D Concrete Printing
  42. Yang Jun-Mo, Park In-Beom, Lee Hojae, Kwon Hongkyu (2022-12)
    Effects of Nozzle Details on Print Quality and Hardened Properties of Underwater 3D Printed Concrete
  43. Yang Liming, Sepasgozar Samad, Shirowzhan Sara, Kashani Alireza et al. (2022-12)
    Nozzle Criteria for Enhancing Extrudability, Buildability and Inter-Layer Bonding in 3D Printing Concrete
  44. Liu Zhixin, Li Mingyang, Wong Teck (2022-11)
    Investigations of Nozzle-Configuration and Process Parameters on Porosity Formation of the 3D Printed Structure
  45. Pan Tinghong, Guo Rongxin, Jiang Yaqing, Ji Xuping et al. (2022-11)
    Flow and Deformation Behaviors of Cementitious Materials Through Nozzles with Different Geometric Parameters:
    Experimental and Numerical Approaches
  46. Bos Derk, Wolfs Robert (2022-06)
    Automated Visual Inspection of Near-Nozzle Droplet-Formation for Quality-Control of Additive Manufacturing
  47. Xu Nuoyan, Qian Ye, Yu Jing, Leung Christopher (2022-05)
    Tensile Performance of 3D Printed Strain-Hardening Cementitious Composites Considering Material-Parameters, Nozzle-Size and Printing-Pattern
  48. Tan Yuan, Dahlenburg Maximilian, Fottner Johannes, Kessler Stephan (2022-04)
    Influencing Factors of the Mixing Performance of a Near-Nozzle Continuous Mixer for 3D Concrete Printing:
    An Analysis Based on Spatial-Lacey-Mixing-Index
  49. Nguyen-Van Sy, Gwak Kwan-Woong (2022-03)
    A Two-Nozzle Cable-Driven Parallel Robot for 3D Printing Building Construction:
    Path-Optimization and Vibration Analysis
  50. He Lewei, Tan Jolyn, Chow Wai, Li Hua et al. (2021-11)
    Design of Novel Nozzles for Higher Inter-Layer Strength of 3D Printed Cement-Paste
  51. Zhang Nan, Xia Ming, Sanjayan Jay (2021-10)
    Short-Duration Near-Nozzle Mixing for 3D Concrete Printing
  52. Craveiro Flávio, Bártolo Helena, Duarte José, Bartolo Paulo (2020-10)
    A Multi-Material Extrusion-Nozzle for Functionally-Graded Concrete Printing
  53. Lao Wenxin, Li Mingyang, Tjahjowidodo Tegoeh (2020-09)
    Variable-Geometry Nozzle for Surface Quality Enhancement in 3D Concrete Printing
  54. Henke Klaudius, Talke Daniel, Matthäus Carla (2020-07)
    Additive Manufacturing by Extrusion of Lightweight Concrete:
    Strand Geometry, Nozzle Design and Layer Layout
  55. McGee Wesley, Ng Tsz, Yu Kequan, Li Victor (2020-07)
    Extrusion Nozzle Shaping for Improved 3DP of Engineered Cementitious Composites (ECC-SHCC)
  56. Toklu Yusuf, Bekdaş Gebrail, Geem Zong (2020-06)
    Harmony-Search-Optimization of Nozzle Movement for Additive Manufacturing of Concrete Structures and Concrete Elements
  57. Manikandan Karthick, Jiang Xuepeng, Singh Amit, Li Beiwen et al. (2020-06)
    Effects of Nozzle Geometries on 3D Printing of Clay Constructs:
    Quantifying Contour-Deviation and Mechanical Properties
  58. Carstensen Josephine (2020-06)
    Topology-Optimization with Nozzle-Size-Restrictions for Material-Extrusion-Type Additive Manufacturing
  59. Liu Zhixin, Li Mingyang, Tay Yi, Weng Yiwei et al. (2020-04)
    Rotation-Nozzle and Numerical Simulation of Mass-Distribution at Corners in 3D Cementitious Material-Printing
  60. Grigoryan Erik, Semenova M. (2020-02)
    Automation of the Construction Process by Using a Hinged Robot with Interchangeable Nozzles
  61. Grigoryan Erik, Babanina Anna, Kulakov Kirill (2019-12)
    Automation of the Construction Process by Using a Hinged Robot with Interchangeable Nozzles
  62. Shakor Pshtiwan, Nejadi Shami, Paul Gavin (2019-05)
    A Study into the Effect of Different Nozzles Shapes and Fiber-Reinforcement in 3D Printed Mortar
  63. Xu Jie, Ding Lieyun, Cai Lixiong, Zhang Lichao et al. (2019-04)
    Volume-Forming 3D Concrete Printing Using a Variable-Size Square Nozzle
  64. Xu Jie, Ding Lieyun (2018-07)
    Volume-Forming 3D Concrete Printing Using a Variable-Diameter Square Nozzle
  65. Lao Wenxin, Tay Yi, Quirin Didier, Tan Ming (2018-05)
    The Effect of Nozzle Shapes on the Compactness and Strength of Structure Printed in Additive Manufacturing of Concrete
  66. Li Mingyang, Lao Wenxin, He Lewei, Masia Lorenzo et al. (2018-05)
    Effect of Rotational Trapezoid Shaped Nozzle on Material-Distribution in 3D Cementitious Material-Printing-Process
  67. Lao Wenxin, Li Mingyang, Masia Lorenzo, Tan Ming (2017-08)
    Approaching Rectangular Extrudate in 3D Printing for Building and Construction by Experimental Iteration of Nozzle Design
  68. Zhou Xiangming, Li Zongjin, Fan Mizi, Chen Huapeng (2013-01)
    Rheology of Semi-Solid Fresh Cement-Pastes and Mortars in Orifice-Extrusion