Skip to content

#micro

Keywords by Co - Occurrence

  1. Shilar Fatheali, Shilar Mubarakali (2025-12)
    Performance-Based Analysis of 3D Printed Geopolymers Relating Durability, Microstructure, and Life Cycle Assessment
  2. Wang Hailong, Song Xinlei, Shen Wenbin, Sun Xiaoyan et al. (2025-10)
    Evaluation and Optimization of 3D-Printed Concrete Based on Flowability Considering Printability and Micro-Pore Characteristics
  3. Jamjala Siva, Thulasirangan Lakshmidevi Manivannan, Reddy K., Kafle Bidur et al. (2025-10)
    A Critical Review on Synergistic Integration of Nanomaterials in 3D-Printed Concrete:
    Rheology to Microstructure and Eco-Functionality
  4. Bai Meiyan, Xiao Jianzhuang, Ding Tao, Chen Weihua (2025-09)
    Integrated Non-Destructive Assessment of 3D Printed UHPC Microstructure Using X-Ray Computed Tomography and Ultrasonic Waves
  5. Lin Yini, Yan Jiachuan, Sun Ming, Tang Boyang et al. (2025-08)
    Effects of Waste Glass Powder on Printability, Hydration and Microstructure of 3D Printing Concrete
  6. Wang Chaofan, Chen Bing, Wang Yong, Vo Thanh et al. (2025-08)
    Influencing Mechanism of Magnesium-to-Phosphate Ratio on the Rheology and Microstructure Development of 3D-Printed Magnesium Phosphate Cement at Early Hydration
  7. Marco Giancarlo, Asta J. (2025-06)
    Neobrutalism:
    The Digital and Cultural Micro-Landscape of 3D-Printed Concrete
  8. Zhang Ruo-Chen, Li Jiaxing, Liu Yiran, Huang Yimiao et al. (2025-06)
    Self-Healing Approach for Micro-Defects in 3D Printed Concrete:
    Microbial Community
  9. Zhou Biao, Zhou Hongru, Yoshioka Hideki, Noguchi Takafumi et al. (2025-04)
    Mechanical and Microstructure Evolution of 3D Printed Concrete Interlayer at Elevated Temperatures
  10. Liu Junli, Hai Hoang, Tran Mien, Tran Jonathan (2025-04)
    Advancing Microstructural Insights in 3D-Printed Cementitious Materials via X-Ray Micro-Computed Tomography
  11. Benros Deborah, Hashemi Arman, Yunsheng Su, Callaghan Carl (2025-04)
    Robotic Micro-House:
    Experience with 3D Concrete Printing for Housing Construction
  12. Zhao Hongyu, Wang Xiangyu, Sun Junbo, Wu Fei et al. (2025-03)
    Automated Analysis System for Micro-Defects in 3D Printed Concrete
  13. Sikora Paweł, Skibicki Szymon, Chougan Mehdi, Szewczyk Piotr et al. (2025-03)
    Silica-Coated Admixtures of Bismuth and Gadolinium Oxides for 3D Printed Concrete Applications:
    Rheology, Hydration, Strength, Microstructure, and Radiation Shielding Perspective
  14. Wang Hailong, Shen Wenbin, Sun Xiaoyan, Song Xinlei et al. (2025-01)
    Influences of Particle-Size on the Performance of 3D Printed Coarse Aggregate Concrete:
    Experiment, Microstructure, and Mechanism Analysis
  15. Zhang Yonghong, Cui Suping, Wang Xinxin, Yang Bohao et al. (2025-01)
    Microstructure and Performance of Recycled Wind Turbine Blade-Based 3D Printed Concrete
  16. Vargas Armando, Robayo-Salazar Rafael, Gutiérrez Ruby (2024-12)
    Effects of Incorporating Fine Aggregates and Polypropylene-Micro-Fibers on the Cracking-Control of 3D Printed Cementitious Mixtures
  17. Li Ben, Li Kaihang, Lyu Xuetao, Zhao Canhao et al. (2024-12)
    Microscopic Mechanism and Predicting Calculation on Mechanical Properties of Basalt-Fiber-Modified 3D Printing Cement-Based Materials
  18. Warsi Syed, Panda Biranchi, Biswas Pankaj (2024-11)
    Structural Analysis of 3D Printed Concrete Walls Under Quasi-Static Cyclic Loading Using Composite Micro-Model
  19. Jin Peng, Hasany Masoud, Kohestanian Mohammad, Mehrali Mehdi (2024-10)
    Micro/Nano Additives in 3D Printing Concrete:
    Opportunities, Challenges, and Potential Outlook in Construction Applications
  20. Rahemipoor Sahand, Bayat Mohammad, Hasany Masoud, Mehrali Mohammad et al. (2024-10)
    Micro-Encapsulated Phase-Change-Material in 3D Printable Mortars
  21. Denis L., Omikrine-Metalssi O., Karam-Cabrerizo R., Barnes-Davin L. et al. (2024-09)
    Impact of Very Early-Age Drying on Printed Concrete Microstructures
  22. Lei Siduo, Kolawole John, Dobrzanski James, Xu Jie et al. (2024-09)
    Enhancing Surface Quality in Additive Manufacturing Applications:
    A Micro-Power Float Approach
  23. Tittelboom Kim, Mohan Dhanesh, Šavija Branko, Keita Emmanuel et al. (2024-08)
    On the Micro-and Meso-Structure and Durability of 3D Printed Concrete Elements
  24. Yang Rijiao, Xu Chengji, Lan Yan, Qiu Yue et al. (2024-08)
    Near Pixel-Level Characterisation of Micro-Fibers in 3D Printed Cementitious Composites and Migration Mechanisms Using a Novel Iterative Method
  25. Xiong Baocheng, Nie Ping, Liu Huanbao, Li Xiaoxi et al. (2024-08)
    Evaluation and Optimization of Micro-Calcium-Carbonate-Modified 3D Printed Rubber-Crumb Concrete
  26. Givkashi Mohammad, Tohidloo Mohammad (2024-07)
    The Effect of Freeze-Thaw-Cycles and Sulfuric-Acid-Attack Separately on the Compressive Strength and Microstructure of 3D Printed Air-Entrained Concrete
  27. Wang Yuting, Chen Meng, Zhang Tong, Zhang Mingzhong (2024-07)
    Hardening Properties and Microstructure of 3D Printed Engineered Cementitious Composites Based on Limestone-Calcined-Clay-Cement
  28. Shoaei Parham, Gallantree-Smith Harrison, Martínez Pacheco Victor, Pamies Ramón et al. (2024-06)
    Comparative Analysis of 3D Printing of Portland Cement Mortars with Hydroxypropyl-Methylcellulose and Micro-Fibrillated Cellulose as Viscosity-Modifying-Agents
  29. Masoud Laith, Hammoud Ahmad, Mortada Youssef, Masad Eyad (2024-06)
    Rheological, Mechanical, and Microscopic Properties of Polypropylene-Fiber-Reinforced Geopolymer Concrete for Additive Manufacturing
  30. Shao Yulong, Yang Jingwei, Kim Jineon, Song Jaejoon et al. (2024-05)
    Microscopic Analysis of Mechanical Anisotropy and Damage-Evolution of 3D Printed Rock-Like Samples Under Uniaxial Compressive Tests
  31. Liu Han, Laflamme Simon, Alessandro Antonella, Ubertini Filippo (2024-05)
    3D Printed Self-Sensing Cementitious Composites Using Graphite and Carbon-Micro-Fibers
  32. Bodur Burak, Mecit Işık Muhammet, Benli Ahmet, Bayrak Barış et al. (2024-05)
    Durability of Green Rubberized 3D Printed Lightweight Cement Composites Reinforced with Micro-Attapulgite and Micro-Steel-Fibers:
    Printability and Environmental Perspective
  33. Yang Jin, Zhai Gaoyuan, He Xingyang, Tang Yuanzhen et al. (2024-05)
    Properties and Microstructure of a Low-Carbon Clinker-Free Cementitious Binder and Its Extrusion-Based Printing Performance
  34. Youssef Passant, Feky Muhammad, Ragab Ahmed, Serag Mohamed (2024-04)
    Characterization of Geopolymer Composites for 3D Printing:
    A Microstructure Approach
  35. Ibrahim Kamoru, Zijl Gideon, Babafemi Adewumi (2024-04)
    Mitigation of Lack-of-Fusion in 3D Printed Limestone-Calcined-Clay-Cement Concrete Induced by Effective Micro-Organisms
  36. Jia Zijian, Zhou Mengting, Chen Yu, Wang Wei et al. (2024-03)
    Effect of Steel-Fiber Shape and Content on Printability, Microstructure and Mechanical Properties of 3D Printable High-Strength Cementitious Materials
  37. Wu Yun-Chen, Wang Xinbo, Li Mo (2024-03)
    Role of Thixotropy in Inter-Layer Microstructure and Properties of Additively Manufactured Cementitious Materials
  38. Vigneshwari Are, Jayaprakash Jaganathan (2024-02)
    A Review on 3D Printable Cementitious Material Containing Copper and Iron-Ore-Tailings:
    Material-Characterization, Activation-Methods, Engineering-Properties, Durability, and Microstructure-Behavior
  39. Tao Yaxin, Mohan Manu, Rahul Attupurathu, Schutter Geert et al. (2024-02)
    Hydration and Microstructure of Calcium-Sulfoaluminate-Portland-Cement Binder Systems for Set-on-Demand Applications
  40. Zhang Hongmei, Hu Fan, Duan Yuanfeng, Liao Jian et al. (2024-02)
    Mechanical Properties and Micro-Structure of Highly Flowable Geopolymer Composites with Low-Content Polyvinyl-Alcohol-Fiber
  41. Li Zihan, Liu Huanbao, Nie Ping, Cheng Xiang et al. (2023-12)
    Mechanical Properties of Concrete Reinforced with High-Performance Micro-Particles for 3D Concrete Printing
  42. Benros Deborah, Hashemi Arman, Yungshen Su, Dungrani Mohan (2023-11)
    Micro-House Using Robotic Manufacturing
  43. Ungureanu Dragoș, Onuțu Cătălin, Țăranu Nicolae, Vornicu Nicoleta et al. (2023-11)
    Microstructure and Mechanical Properties of Cost-Efficient 3D Printed Concrete Reinforced with Polypropylene Fibers
  44. Tarhan Yeşim, Şahin Remzi (2023-10)
    The Physicomechanical Behavior and Microstructure of Air-Entrained 3D Printable Concrete
  45. Sukontasukkul Piti, Khomkum Sila, Maho Buchit, Fujikake Kazunori (2023-09)
    Printability and Shape Stability of Cement Mortar Incorporating Low Volume of Micro-Polypropylene Fiber for 3D Printing Application
  46. Luo Fuming, Cui Peng, Tang Wei, Wu Chun-ran et al. (2023-09)
    Influences of Engineering Spoil on the Properties and Microstructure of 3D Printable Magnesium-Cement
  47. Ahmadi Khatereh, Mousavi Seyed, Dehestani Mehdi (2023-09)
    Influence of Nano-Coated Micro-Steel-Fibers on Mechanical and Self-Healing Properties of 3D Printable Concrete Using Graphene-Oxide and Polyvinyl-Alcohol
  48. Wang Yang, Qiu Liu-Chao, Hu Yan-Ye, Cheng Song-Gui et al. (2023-08)
    Influential Factors on Mechanical Properties and Microscopic Characteristics of Underwater 3D Printing Concrete
  49. Ding Tao, Xiao Jianzhuang, Mechtcherine Viktor (2023-05)
    Microstructure and Mechanical Properties of Inter-Layer Regions in Extrusion-Based 3D Printed Concrete:
    A Critical Review
  50. Sun Guangcheng, Wang Zhiguang, Yu Chengkun, Qian Xiaoqian et al. (2023-05)
    Properties and Microstructures of 3D Printable Sulphoaluminate-Cement Concrete Containing Industrial Byproducts and Nano-Clay
  51. Ibrahim Kamoru, Jaji Mustapha, Zijl Gideon, Babafemi Adewumi (2023-03)
    Influence of Effective Micro-Organisms on the Rheology and Fresh State Properties of SCMs-Based Concrete for Digital Fabrication
  52. Anleu Paula, Wangler Timothy, Nerella Venkatesh, Mechtcherine Viktor et al. (2023-03)
    Using Micro-XRF to Characterize Chloride-Ingress Through Cold Joints in 3D Printed Concrete
  53. Cui Dong, Wu Yingxuan, Xie Xiaoying, Tian Guanfei et al. (2023-03)
    Investigation on the Micro-Structure of a 3D Printed Mortar Through a Novel Leaching-Subsidiary Tomography
  54. Nefs Karsten, Menkovski Vlado, Bos Freek, Suiker Akke et al. (2022-12)
    Automated Image Segmentation of 3D Printed Fibrous Composite Micro-Structures Using a Neural Network
  55. Walker Ian, Krovi Venkat, Peerzada Abdul, Raman Adhiti et al. (2022-10)
    3D Concrete Printing with Macro-Micro Robots
  56. Yang Rijiao, Zhu Yi, Lan Yan, Zeng Qiang et al. (2022-10)
    Differences in Micro Grain & Fiber-Distributions Between Matrix and Inter-Layer of Cementitious Filaments Affected by Extrusion-Molding
  57. Dong Liang, Yang Yekai, Liu Zhongxian, Ren Quanchang et al. (2022-07)
    Microstructure and Mechanical Behavior of 3D Printed Ultra-High-Performance Concrete after Elevated Temperatures
  58. Zhu Binrong, Pan Jinlong, Li Junrui, Wang Penghui et al. (2022-07)
    Relationship Between Microstructure and Strain-Hardening Behavior of 3D Printed Engineered Cementitious Composites
  59. Han Nv, Xiao Jianzhuang, Zhang Lihai, Peng Yu (2022-06)
    A Micro-Scale-Based Numerical Model for Investigating Hygro-Thermo-Mechanical Behavior of 3D Printed Concrete at Elevated Temperatures
  60. Danish Aamar, Khurshid Kiran, Mosaberpanah Mohammad, Ozbakkaloglu Togay et al. (2022-06)
    Micro-Structural Characterization, Driving Mechanisms, and Improvement-Strategies for Inter-Layer Bond Strength of Additive Manufactured Cementitious Composites:
    A Review
  61. Zhou Ji, Hou Guanyu, Liu Xiongfei, Li Qi et al. (2022-04)
    Mechanical Properties of Spray-Based 3D Printed Micro-Cable-Reinforced Concrete
  62. Bong Shin, Nematollahi Behzad, Xia Ming, Ghaffar Seyed et al. (2022-04)
    Properties of Additively Manufactured Geopolymer Incorporating Mineral-Wollastonite-Micro-Fibers
  63. Yang Huashan, Che Yujun (2022-01)
    Recycling of Aggregate Micro-Fines as a Partial Replacement for Fly-Ash in 3D Printing Cementitious Materials
  64. Sukontasukkul Piti, Panklum Kasidet, Maho Buchit, Banthia Nemkumar et al. (2021-12)
    Effect of Synthetic Micro-Fiber and Viscosity-Modifying-Agent on Layer Deformation, Viscosity, and Open-Time of Cement Mortar for 3D Printing Application
  65. Jones Scott, Hipp Julie, Allen Andrew, Gagnon Cedric (2021-12)
    Rheology and Microstructure Development of Hydrating-Tricalcium-Silicate:
    Implications for Additive Manufacturing in Construction
  66. Wu Zixia, Xu Yading, Šavija Branko (2021-12)
    Mechanical Properties of Lightweight Cementitious Cellular Composites Incorporating Micro-Encapsulated Phase-Change-Material
  67. Liu Junli, Li Shuai, Gunasekara Chamila, Fox Kate et al. (2021-11)
    3D Printed Concrete with Recycled Glass:
    Effect of Glass Gradation on Flexural Strength and Microstructure
  68. Li Zhijian, Ma Guowei, Wang Fang, Wang Li et al. (2021-10)
    Expansive Cementitious Materials to Improve Micro-Cable-Reinforcement Bond in 3D Concrete Printing
  69. Wi Kwangwoo, Wang Kejin, Taylor Peter, Laflamme Simon et al. (2021-09)
    Properties and Microstructure of Extrusion-Based 3D Printing Mortar Containing a Highly Flowable, Rapid Set Grout
  70. Moini Mohamadreza, Baghaie Ahmadreza, Rodriguez Fabian, Zavattieri Pablo et al. (2021-06)
    Quantitative Microstructural Investigation of 3D Printed and Cast Cement-Pastes Using Micro-Computed Tomography- and Image-Analysis
  71. Baz Bilal, Aouad Georges, Kleib Joelle, Bulteel David et al. (2021-04)
    Durability-Assessment and Micro-Structural Analysis of 3D Printed Concrete Exposed to Sulfuric-Acid Environments
  72. Rutzen Matthias, Lauff Philipp, Niedermeier Roland, Fischer Oliver et al. (2021-03)
    Influence of Fiber-Alignment on Pseudoductility and Micro-Cracking in a Cementitious Carbon-Fiber Composite Material
  73. Sikora Paweł, Chougan Mehdi, Cuevas Villalobos Karla, Liebscher Marco et al. (2021-02)
    The Effects of Nano- and Micro-Sized Additives on 3D Printable Cementitious and Alkali-Activated Composites:
    A Review
  74. Yang Huashan, Li Weiwei, Che Yujun (2020-08)
    3D Printing Cementitious Materials Containing Nano-CaCO3:
    Workability, Strength, and Microstructure
  75. Li Zhijian, Wang Li, Ma Guowei, Sanjayan Jay et al. (2020-07)
    Strength and Ductility Enhancement of 3D Printing Structure Reinforced by Embedding Continuous Micro-Cables
  76. Bong Shin, Nematollahi Behzad, Arunothayan Arun, Xia Ming et al. (2020-07)
    Effect of Wollastonite Micro-Fiber Addition on Properties of 3D Printable ‘Just-Add-Water’ Geopolymers
  77. Li Zhijian, Wang Li, Ma Guowei (2020-01)
    Mechanical Improvement of Continuous Steel-Micro-Cable-Reinforced Geopolymer Composites for 3D Printing Subjected to Different Loading Conditions
  78. Kosson Michael, Brown Lesa, Sanchez Florence (2020-01)
    Early-Age Performance of 3D Printed Carbon-Nano-Fiber and Carbon Micro-Fiber Cement Composites
  79. Rutzen Matthias, Volkmer Dirk, Weiss Ursula, Reischmann Lisa et al. (2019-09)
    Micro-Structural Analysis of Crack-Growth Caused by Static and Dynamic Loads in a Carbon-Fiber-Reinforced Cement-Paste
  80. Long Wujian, Tao Jie-Lin, Lin Can, Gu Yucun et al. (2019-08)
    Rheology and Buildability of Sustainable Cement-Based Composites Containing Micro-Crystalline Cellulose for 3D Printing
  81. Nair Sooraj, Alghamdi Hussam, Arora Aashay, Mehdipour Iman et al. (2019-01)
    Linking Fresh Paste Microstructure, Rheology and Extrusion-Characteristics of Cementitious Binders for 3D Printing
  82. Panda Biranchi, Tan Ming (2018-11)
    Rheological Behavior of High-Volume Fly-Ash Mixtures Containing Micro-Silica for Digital Construction Application
  83. Ma Guowei, Li Zhijian, Wang Li, Bai Gang (2018-10)
    Micro-Cable-Reinforced Geopolymer Composite for Extrusion-Based 3D Printing
  84. Moini Mohamadreza, Olek Jan, Magee Bryan, Zavattieri Pablo et al. (2018-09)
    Additive Manufacturing and Characterization of Architectured Cement-Based Materials via X-Ray Micro-Computed Tomography
  85. Putten Jolien, Schutter Geert, Tittelboom Kim (2018-09)
    The Effect of Print Parameters on the (Micro)structure of 3D Printed Cementitious Materials