#clay¶

Keywords by Co - Occurrence¶

#print (111) #cement (50) #concrete (43) #limestone (43) #base (31)

1. Wagiri Felicia, Shih Shen, Jauk Julian, Stavric Milena (2026-03)
   Continuous Clay:
   Optimized Toolpaths for 3D-Printed Ceramic Structures Inspired by Weaving Patterns
2. Morán-Zabala Jean, Cogollo-Flórez Juan, Gutiérrez-Rôa Derly, Correa-Espinal Alexander (2026-02)
   Design of Experiments-Based Analysis of Operating Parameters in Small-Scale Clay 3D Printing
3. Moussa Nada, Haim Mohamed, Rida Loubaba (2026-01)
   Limestone–Calcined Clay:
   An Alternative Binder for 3D Concrete Printing
4. Jenny David, Cutajar Sacha, Chan Yen-Fen, Jenny Ercan et al. (2026-01)
   Earth-to-Earth:
   Ultra-Thin 3D-Printed Clay Formwork for in-Situ Earth-Casting
5. Aabbas Mohamed, Mazian Brahim, Ahachad Mohammed, Zoghlami Aya et al. (2025-12)
   Sustainable 3D Printed Clay Bricks Incorporating Coffee Waste:
   Toward Circular Economy in Construction
6. Teixeira João, Jesus Manuel, Ribeiro Elis, Rangel Bárbara et al. (2025-12)
   Large Format Additive Manufacturing with Cement and Clay Applications
7. Guerrero Ana, Asensio Eloy, Fernández Fernando (2025-12)
   Large‐Format Additive Manufacturing with Cement and Clays:
   Characterization Methods
8. Nguyen Trang, Park Jaejun, Kim Dong-Hyun (2025-11)
   Impacts of Infill Patterns and Curve Types in 3D Printed Clay Walls
9. Abidi Imene, Tuna Meral, Carboni Biagio, Trovalusci Patrizia (2025-11)
   A Parametric Study on Topology Optimization of Additively Manufactured Clay Materials
10. Abedi Mohammadmadhi, Waris Muhammad, Alawi Mubarak, Jabri Khalifa et al. (2025-11)
    Data-Driven Design of Sustainable LC³ for 3D Printing with Omani Clays
11. Bakr Somahi, Cruz Marcos, Mayor-Luque Ricardo (2025-10)
    Cura Salad:
    Robotic Heated Spatial 3D Printing of Salt-Clay Composites for Health-Oriented Vernacular Architecture
12. Wang Yuting, Chen Meng, Zhang Tong, Zhang Mingzhong (2025-10)
    Influence of Limestone Calcined Clay on the Mechanical Behaviour of 3D Printed Engineered Cementitious Composites
13. Gonsalves Nicolas, Morgan Ashlei, Thiele Heidi, Olarra Andre et al. (2025-10)
    3D Printing of Sustainable Infrastructure Using Rapid-Set Clay Concrete with Biobased Additives
14. Rabul H., Prem Prabhat, Ravichandran Darssni, Rathan RT Arjun (2025-09)
    Development of Fly Ash and Limestone Calcined Clay-Based Mixtures for Concrete 3D Printing
15. Kua Harn, Shi A., Kajandran V., Lam T. et al. (2025-09)
    Toward Sustainable Construction 3D Printing:
    Limestone and Non-Calcined Recycled Marine Clay as Partial Cement Replacement
16. Vollmert Jasper, Peralta Patricia, Alatassi Adel, Chmelnizkij Alexander et al. (2025-09)
    Towards Structural Health Monitoring of Clay-Printed Structures
17. Baritakis Mario, Traine Phillip, Granzow Jan, Döbert Christine (2025-08)
    3D-Printed Clay Formwork for Topology:
    Optimized Concrete Elements
18. Abedi Mohammadmadhi, Waris Muhammad, Alawi Mubarak, Jabri Khalifa (2025-08)
    Transformative Low-Carbon 3D-Printed Infrastructure:
    Machine Learning-Driven Self-Sensing and Self-Heating Limestone Calcined Clay Cement (LC3) Composites
19. Boddepalli Uday, Kandagaddala Revanth, Nanthagopalan Prakash (2025-08)
    Evaluation of Alkali-Activated Limestone Calcined Clay Mortars for 3D Concrete Printing Applications
20. Aydin Tolga, Sandalci Ilgin, Aydin Eylül, Kara Burhan et al. (2025-08)
    Investigation of Bacterial Cells and Clays as Rheology Modifiers in 3D Concrete Printing
21. Oulkhir Fatima, Akhrif Iatimad, Jai Mostapha, Rihani Nadir (2025-07)
    Clay and Alginate-Based Mixtures 3D Printing:
    A Numerical Procedure for Shape Stability and Buildability Assessment
22. Peralta Patricia, Al-Zuriqat Thamer, Noufal Mahmoud, Smarsly Kay (2025-07)
    Automated Defect Detection in Clay Printing
23. Abdelaziz Mohamed, Vukorep Ilija, Mahdy Deena (2025-07)
    Exploring Extreme 3D Printed Clay Overhangs with Integrated Active Hot Air Drying System on Robotic Arm
24. Ma Jinyi, Zhang Haiyan, Wang Yanzhi, Xiong Lu et al. (2025-07)
    Effect of Clay Brick Powder and Recycled Fine Aggregates on Properties of 3D Printed Concrete After High Temperature Exposure
25. Kaur Zinnia, Goyal Shweta, Kwatra Naveen, Bera Tarun (2025-07)
    Pore Structure Analysis and Durability Performance of Sustainable 3D Printed Concrete Incorporating Fly Ash and Limestone Calcined Clay Based Binders
26. Noaimat Yazeed, Chougan Mehdi, Sambucci Matteo, Valente Marco et al. (2025-06)
    Optimising Limestone Calcined Clay Cement Containing Excavated Low-Grade Waste Clay for 3D Printing Applications
27. Guillen Ruth, Naldoni Lapo, Quka Katerina, Gioia Flavio et al. (2025-06)
    Water Resistance of 3D Printed Clay with Bio-Stabilizers
28. Kumar Sandeep, Kumar Abhishek, Pundir Aakanksha, Dwivedi Ashutosh et al. (2025-06)
    Low-Clay Soil as Fine Aggregate in 3D Printed Concrete:
    Insights into Fresh and Hardened Properties
29. Jin Chenxi, Xu Chenhan, Xu Weishun (2025-05)
    Integrating 3D-Printed Clay Formwork into Thin-Vaulted Green Roof
30. Campos Guilherme, Lunelli Pietro, Moraes Elisângela, Souza Marcelo et al. (2025-04)
    Optimization of Clay-Based Ceramic Mixtures with Sugarcane Bagasse Fiber for 3D Printing
31. Shen Jianyu, Ye Taohua, Xiao Jianzhuang, Li Shuisheng (2025-04)
    Mechanical and Thermal Properties of 3D Printed Earth Concrete Solidified by Geopolymers:
    A Study of Utilizing Excavated Clay
32. Beigh Mirza, Signorini Cesare, Rauf Asim, Schröfl Christof et al. (2025-04)
    Intrinsic Rheological Behavior of Limestone Calcined Clay Cementitious (LC3) Binders for Automated Construction:
    Effect of Calcium Sulfate Varieties
33. Over Derya, Ozbakan Nesil (2025-04)
    Effect of Recycled Aggregate Use on the Fresh State Properties of Limestone Calcined Clay Cement (LC3) Mortars
34. Noaimat Yazeed, Chougan Mehdi, Seidy Eslam, Albar Abdulrahman et al. (2025-04)
    Optimizing Limestone Calcined Clay Cement for Enhanced 3D Printing Performance of Low-Carbon Materials
35. Kurniati Eka, Kim Heejeong (2025-04)
    Enhancing the Printability of 3D Printing Limestone Calcined Clay Cement Using Hydroxyethyl Cellulose Admixture and Silica Fume
36. Araújo Rísia, Martinelli Antônio, Cabral Kleber, Nunes Ueslei et al. (2025-03)
    Effect of Lightweight Expanded Clay Aggregate (LECA) On the Printability of Cementitious Compositions for 3D Printing
37. Flor Juncal Luis, Scott Allan, Clucas Don, Loporcaro Giuseppe (2025-02)
    Permeability and Electrical Resistivity of 3D-Printed Mortars Using Local Materials (Zeolite, Calcined Clay, and Mussel Shell Powder):
    Aotearoa, New Zealand
38. Márquez Álvaro, Varela Hugo, Barluenga Gonzalo (2024-12)
    Rheology and Early-Age Evaluation of 3D Printable Cement-Limestone-Filler-Pastes with Nano-Clays and Methylcellulose
39. Ascic Ana, Smigielska Maria, Mitropoulou Ioanna, Xydis Achilleas (2024-11)
    Clay Acoustic Patterns
40. Abdelmohsen Sherif, Massoud Passant (2024-11)
    Synthetic Fabrications:
    Lessons from Integrating Robotic Clay-Fabrication in Architectural Education
41. Kleibel-McGee Kilian, Gosch Lukas, Jauk Julian, Ristoski Kristijan et al. (2024-11)
    Integration of Weaving- and Sewing-Motions into the 3D Printing of Clay for Lightweight Ceramic-Structures
42. Althoey Fadi, Zaid Osama, Ahmed Bilal, Elhadi Khaled (2024-10)
    Impact of Double Hooked Steel-Fibers and Nano-Kaolin-Clay on Fresh Properties of 3D Printable Ultra-High-Performance Fiber-Reinforced Concrete
43. Gyawali Biva, Haghnazar Ramtin, Akula Pavan, Alba Kamran et al. (2024-10)
    A Review on 3D Printing with Clay and Sawdust/Natural Fibers:
    Printability, Rheology, Properties, and Applications
44. Madrid Javier, Ortega Guillermo, Olsson Nils, Tenorio Ríos José (2024-10)
    3D Constructing:
    Exploring the Potential of 3D Concrete and Clay Printing with Generative Design for Architectural Innovation
45. Flor Juncal Luis, Loporcaro Giuseppe, Scott Allan, Clucas Don (2024-10)
    Influence of Printing-Parameters on the Durability of 3D Printed Limestone-Calcined-Clay-Cement Mortar:
    Overlap Between Filaments and Nozzle-Offset
46. Jin Willy, Roux Charlotte, Ouellet-Plamondon Claudiane, Caron Jean-François (2024-09)
    Life Cycle Assessment of Limestone-Calcined-Clay-Concrete:
    Potential for Low-Carbon 3D Printing
47. Varela Hugo, Barluenga Gonzalo, Sonebi Mohammed (2024-09)
    Evaluation of Basalt-Fibers and Nano-Clays to Enhance Extrudability and Buildability of 3D Printing Mortars
48. Nan Cristina (2024-09)
    The Computational Clay Column:
    Computational Ceramic Systems with Additive Manufacturing
49. Vele Jiří, Prokop Simon, Ciganik Ondrej, Kurilla Lukáš et al. (2024-09)
    Non-Planar 3D Printing of Clay Columns:
    A Method for Improving Stability and Performance
50. Baytak Tugba, Gdeh Tawfeeq, Jiang Zhangfan, Arce Gabriel et al. (2024-09)
    Rheological, Mechanical, and Environmental Performance of Printable Graphene-Enhanced Cementitious Composites with Limestone and Calcined Clay
51. Nikravan Ata, Aydin Tolga, Özyurt Nilüfer, Bundur Zeynep (2024-09)
    Enhancing the Performance of 3D Printed Fiber-Reinforced Mortar:
    Synergistic Effects of Clays and Bacterial Cells as Viscosity-Modifying-Agents
52. Gürsoy Benay (2024-09)
    From Control to Uncertainty in 3D Printing with Clay
53. Chougan Mehdi, Skibicki Szymon, Noaimat Yazeed, Federowicz Karol et al. (2024-09)
    Comparative Analysis of Ternary Blended Cement with Clay and Engineering-Brick-Aggregate for High-Performance 3D Printing
54. Noaimat Yazeed, Ghaffar Seyed (2024-09)
    Exploring Low-Carbon Cementitious Materials for 3D Printing Applications:
    A Comparison Between Limestone-Calcined-Clay-Cement and One-Part Alkai-Activated Material
55. Hierden Naomi, Yu Q., Brouwers Henricus (2024-09)
    Mechano-Chemically Activated Local Clays as Sustainable Binder Replacement for 3D Concrete Mixtures
56. Joon Hillar, Peetrimägi Lauri (2024-09)
    Influence of Illitic Calcined Clay on Properties of Mixtures for 3D Concrete Printing
57. Chen Yu, Zhang Yamei, Schlangen Erik, Çopuroğlu Oğuzhan (2024-09)
    Development of Set-on-Demand 3D Printable Limestone-Calcined-Clay-Based Cementitious Materials Using Desalination Brine
58. Chaari Mohamed, Pereira Gilroy, Daroge Fawwad, Buainain Shamma (2024-08)
    3D Printing Birdhouses with Ceramic Clay Using a Six-Axis Palletizing Robot
59. Ibrahim Kamoru, Zijl Gideon, Babafemi Adewumi (2024-08)
    Time-Dependent Behavior of 3D Printed Fiber-Reinforced Limestone-Calcined-Clay-Cement Concrete Under Sustained Loadings
60. Pemas Sotirios, Sougioultzi Konstantina, Kouroutzidou Chrysoula, Stefanidou Maria et al. (2024-07)
    Enhancing Clay-Based 3D Printed Mortars with Polymeric Mesh Reinforcement Techniques
61. Bhattacherjee Shantanu, Jain Smrati, Santhanam Manu (2024-07)
    Investigating the Interaction of Limestone-Calcined-Clay and OPC-Based Systems with a Methylhydroxyethyl-Cellulose-Based Viscosity-Modifier Used for 3D Printable Concrete
62. Aabbas Mohamed, Mahdaoui Mustapha, Ahachad Mohammed, Mazian Brahim et al. (2024-07)
    Advancing Sustainable Construction:
    Terracotta Component Development Through Extrusion-Based 3D Printing with Local Clay
63. Hanratty Niall, Khan Mehran, McNally Ciaran (2024-07)
    The Role of Different Clay Types in Achieving Low-Carbon 3D Printed Concretes
64. Kladovasilakis Nikolaos, Pemas Sotirios, Pechlivani Eleftheria (2024-07)
    Computer-Aided Design of 3D Printed Clay-Based Composite Mortars Reinforced with Bio-Inspired Lattice Structures
65. Dorresteijn Evelien, Tsiotou Sofia, Lowke Dirk (2024-07)
    Keeping the Processability of a Clay Mortar for Extrusion 3D Printing While Decreasing Shrinkage and Increasing the Green Strength
66. Mozaffari Salma, Kamravafar Rahasadat, Li Yunyan, Mata-Falcón Jaime et al. (2024-07)
    Leveraging Clay-Formwork 3D Printing for Reinforced-Concrete Construction
67. Liew Kim, Li Gen, Yin Binbin, Sun Jinhua et al. (2024-07)
    Structural Deterioration and Mechanical Degradation of Limestone-Calcined-Clay-Cement Under Elevated Temperature
68. Wang Yuting, Chen Meng, Zhang Tong, Zhang Mingzhong (2024-07)
    Hardening Properties and Microstructure of 3D Printed Engineered Cementitious Composites Based on Limestone-Calcined-Clay-Cement
69. Ndarowa Tariro, Mahachi Jeffrey, Ikotun Bolane (2024-06)
    A Review of Optimization of Limestone and Calcined-Clay-Cement Concrete Mixtures for 3D Printing
70. Romario Yulius, Bhat Chinmai, Ramezani Maziar, Jiang Cho-Pei (2024-06)
    Marine-Waste-Management of Oyster-Shell-Waste as Reinforcement for Clay Additive Manufacturing Components
71. Li Haodao, Wei Jingjie, Khayat Kamal (2024-06)
    3D Printing of Fiber-Reinforced Calcined Clay-Limestone-Based Cementitious Materials:
    From Mixture Design to Printability Evaluation
72. Yousaf Arslan, Rashid Ans, Koç Muammer (2024-05)
    Parameter-Tuning for Sustainable 3D Printing of Clay Structures
73. Maierdan Yierfan, Zhao Diandian, Choksi Pooja, Garmonina Maria et al. (2024-05)
    Rheology, 3D Printing, and Particle-Interactions of Xanthan-Gum-Clay Binder for Earth Concrete
74. Taqa Ala, Mohsen Mohamed, Aburumman Mervat, Naji Khalid et al. (2024-05)
    Nano-Fly-Ash and Clay for 3D Printing Concrete Buildings:
    A Fundamental Study of Rheological, Mechanical and Microstructural Properties
75. Rückrich Stefanie, Agranati Galit, Grobman Yasha (2024-05)
    Evaluating Clay Characteristics for Printable Geo-Materials:
    A Case Study of Clay-Sand Mixes
76. Los Angeles Ortega Rosario Maria, Medina Melany, Duque Rafael, Alberto Jaén Ortega Antonio et al. (2024-05)
    Advancing Sustainable Construction:
    Insights into Clay-Based Additive Manufacturing for Architecture, Engineering, and Construction
77. Xu Weishun, Jin Chenxi, Qian Xidong, Jin Zihao (2024-04)
    Mass-Customization of Integrated Green Wall Building Blocks through Clay Printing Formwork
78. Ibrahim Kamoru, Zijl Gideon, Babafemi Adewumi (2024-04)
    Mitigation of Lack-of-Fusion in 3D Printed Limestone-Calcined-Clay-Cement Concrete Induced by Effective Micro-Organisms
79. Babafemi Adewumi, Norval Chris, Kolawole John, Paul Suvash et al. (2024-04)
    3D Printed Limestone-Calcined-Clay-Cement Concrete Incorporating Recycled Plastic-Waste:
    RESIN8
80. Gündüz Gamze, Özkar Mine (2024-02)
    A Process-Based Framework for Adaptable Modules in Robotic Clay 3D Printing
81. Gong Lei, Yuan Philip (2024-01)
    ISOMORPHISM:
    Stylized Translations of 2D Prototype in Additive Clay Printing
82. Chen Yu, Rahmani Hossein, Schlangen Erik, Çopuroğlu Oğuzhan (2023-11)
    An Approach to Develop Set-on-Demand 3D Printable Limestone-Calcined-Clay-Based Cementitious Materials Using Calcium-Nitrate
83. Jauk Julian, Vašatko Hana, Gosch Lukas, Ristoski Kristijan et al. (2023-11)
    Coextrusion of Clay-Based Composites:
    Using a Multi-Material Approach to Achieve Gradient Porosity in 3D Printed Ceramics
84. Diniz Nancy, Melendez Frank (2023-11)
    Myco Clay:
    3D Printing Mycelium and Clay Biocomposites
85. Lu Bing, Li Ziyang, Li Mingyang, Feng Jianhang et al. (2023-11)
    Substitution of Cement by Marine-Clay in Spray-Based 3D Concrete Printing
86. Shahmirzadi Mohsen, Gholampour Aliakbar, Kashani Alireza, Ngo Tuan (2023-10)
    Geopolymer Mortars for Use in Construction 3D Printing:
    Effect of LSS, Graphene-Oxide and Nano-Clay at Different Environmental Conditions
87. Taher Ammar, Aşut Serdar, Spoel Willem (2023-10)
    An Integrated Workflow for Designing and Fabricating Multi-Functional Building Components Through Additive Manufacturing with Clay
88. Asaf Ofer, Bentur Arnon, Larianovsky Pavel, Sprecher Aaron (2023-10)
    From Soil to Printed Structures:
    A Systematic Approach to Designing Clay-Based Materials for 3D Printing in Construction and Architecture
89. Tabakova Vesela, Klug Christina, Schmitz Thomas (2023-10)
    Dynamic Extrusion-Control in Spot-Deposition Modeling for Porous 3D Clay-Structures
90. Kaushik Sandipan, Sonebi Mohammed, Amato Giuseppina, Perrot Arnaud et al. (2023-09)
    Effect of Nano-Clay on the Printability of Extrusion-Based 3D Printable Mortar
91. Coskun Agit, Jensen Mads (2023-09)
    Integrating Additional Elements in Clay 3D Printing with Human Intervention
92. Yin Xunzhi, Guo Chong, Sun Bo, Chen Honggang et al. (2023-09)
    The State of the Art in Digital Construction of Clay Buildings:
    Reviews of Existing Practices and Recommendations for Future Development
93. Jauk Julian, Gosch Lukas, Vašatko Hana, Königsberger Markus et al. (2023-09)
    Filament-Reinforced 3D Printing of Clay
94. Mohsen Mohamed, Diseet Malak, Aburumman Mervat, Taha Ramzi et al. (2023-09)
    3D Printed Clay Enhanced with Graphene-Nano-Platelets for Sustainable and Green Construction
95. Ospina Salazar Ana, Valencia Isaza Andrés, Restrepo Montoya José, Mejía Arcila Johanna et al. (2023-09)
    Upcycling Fly-Ash, Red-Clay-Brick Waste, and Paper-Sludge as Feedstock for Manufacturing a Lightweight Extruded Composite:
    Design and Characterization
96. Matos Paulo, Zat Tuani, Lima Marcelo, Neto José et al. (2023-08)
    Effect of the Superplasticizer-Addition Time on the Fresh Properties of 3D Printed Limestone-Calcined-Clay-Cement (LC³) Concrete
97. Varela Hugo, Barluenga Gonzalo, Sonebi Mohammed (2023-07)
    Rheology Characterization of 3D Printing Mortars with Nano-Clays and Basalt-Fibers
98. Varela Hugo, Barluenga Gonzalo, Perrot Arnaud (2023-07)
    Extrusion and Structural Build-Up of 3D Printing Cement-Pastes with Fly-Ash, Nano-Clay and VMAs
99. Ibrahim Kamoru, Jaji Mustapha, Zijl Gideon, Babafemi Adewumi (2023-07)
    Hardened Properties of 3D Printed Limestone-Calcined-Clay-Cement Concrete
100. Çapunaman Özgüç, Iseman Emily, Gürsoy Benay (2023-07)
     Material in the Loop Fabrication:
     A Vision-Based Adaptive Clay 3D Printing Workflow on Indeterminate Sand Surfaces
101. Wang Fei, Hua Sudong, Chen Tingzhu, He Bijuan et al. (2023-07)
     Effect of Nano-Clay and PCE on the Buildability of Ultra-Fine Dredged Sand-Based 3D Printing Materials
102. Yang Hui-Qin, Klug Christina, Schmitz Thomas (2023-06)
     Fiber-Reinforced Clay:
     An Exploratory Study on Automated Thread Insertion for Enhanced Structural Integrity in LDM.
103. Mozaffari Salma, Bruce Mackenzie, Clune Gabrielle, Xie Ruxin et al. (2023-06)
     Digital Design and Fabrication of Clay Formwork for Concrete Casting
104. Jacquet Yohan, Perrot Arnaud (2023-06)
     Evolutionary Approach Based on Thermoplastic Bio-Based Building Material for 3D Printing Applications:
     An Insight into a Mix of Clay and Wax
105. Sahoo Pitabash, Gupta Souradeep (2023-06)
     3D Printable Earth-Based Alkali-Activated Materials:
     Role of Mix-Design and Clay-Rich Soil
106. Chen Yu, Zhang Yu, He Shan, Liang Xuhui et al. (2023-06)
     Improving Structural Build-Up of Limestone-Calcined-Clay-Cement-Pastes by Using Inorganic Additives
107. Sun Guangcheng, Wang Zhiguang, Yu Chengkun, Qian Xiaoqian et al. (2023-05)
     Properties and Microstructures of 3D Printable Sulphoaluminate-Cement Concrete Containing Industrial Byproducts and Nano-Clay
108. Noaimat Yazeed, Chougan Mehdi, Kheetan Mazen, Mandhari Othman et al. (2023-04)
     3D Printing of Limestone-Calcined-Clay-Cement:
     A Review of Its Potential Implementation in the Construction-Industry
109. Zhao Yasong, Gao Yangyunzhi, Chen Gaofeng, Li Shujun et al. (2023-04)
     Development of Low-Carbon Materials from GGBS and Clay-Brick-Powder for 3D Concrete Printing
110. Xu Nuoyan, Qian Ye (2023-04)
     Effects of Fiber-Volume Fraction, Fiber Length, Water-Binder Ratio, and Nano-Clay Addition on the 3D Printability of Strain-Hardening Cementitious Composites
111. Kilic Ugur, Ma Ji, Baharlou Ehsan, Ozbulut Osman (2023-03)
     Effects of Viscosity-Modifying Admixture and Nano-Clay on Fresh and Rheo-Viscoelastic Properties and Printability Characteristics of Cementitious Composites
112. Bhattacherjee Shantanu, Jain Smrati, Santhanam Manu (2023-03)
     Developing 3D Printable and Buildable Limestone-Calcined-Clay-Based Cement Composites with Higher Aggregate Content
113. Ibrahim Kamoru, Zijl Gideon, Babafemi Adewumi (2023-03)
     Influence of Limestone-Calcined-Clay-Cement on Properties of 3D Printed Concrete for Sustainable Construction
114. Dai Xiaodi, Tao Yaxin, Tittelboom Kim, Schutter Geert (2023-02)
     Rheological and Mechanical Properties of 3D Printable Alkali-Activated Slag Mixtures with Addition of Nano Clay
115. Madrid Javier, Ortega Guillermo, Gorostiza Carabaño Javier, Olsson Nils et al. (2023-02)
     3D Claying:
     3D Printing and Recycling Clay
116. Zhang Chao, Jia Zijian, Luo Zhe, Deng Zhicong et al. (2022-11)
     Printability and Pore-Structure of 3D Printing Low-Carbon Concrete Using Recycled Clay-Brick-Powder with Various Particle-Features
117. Bhattacherjee Shantanu, Jain Smrati, Santhanam Manu (2022-11)
     Criticality of Binder-Aggregate Interaction for Buildability of 3D Printed Concrete Containing Limestone-Calcined-Clay
118. Estévez Alberto, Abdallah Yomna (2022-10)
     The New Standard Is Biodigital:
     Durable and Elastic 3D Printed Biodigital Clay Bricks
119. Chougan Mehdi, Ghaffar Seyed, Nematollahi Behzad, Sikora Paweł et al. (2022-09)
     Effect of Natural and Calcined-Halloysite-Clay-Minerals as Low-Cost-Additives on the Performance of 3D Printed Alkali-Activated Materials
120. Ibrahim Kamoru, Zijl Gideon, Babafemi Adewumi (2022-09)
     Rheological and Strength-Characterisation of Limestone-Calcined-Clay-Cement 3D Printed Concrete
121. Kaushik Sandipan, Sonebi Mohammed, Amato Giuseppina, Perrot Arnaud et al. (2022-08)
     Investigation of Fresh Properties of 3D Concrete Printing Containing Nano-Clay in Forms of Suspension and Powder
122. Pain Suzi, Choo Ee, Bartov Nitsan, Young Jack (2022-07)
     How to Dress a Column:
     An Architect's Method for Designing with 3D Printed Clay
123. Dielemans Gido, Lachmayer Lukas, Recker Tobias, Atanasova Lidia et al. (2022-06)
     Mobile Additive Manufacturing:
     A Case Study of Clay Formwork for Bespoke In-Situ Concrete Construction
124. Abdalqader Ahmed, Sonebi Mohammed, Dedenis Marie, Amziane Sofiane et al. (2022-06)
     Mechanical Performance of 3D Printed Concrete Containing Fly-Ash, Metakaolin and Nano-Clay
125. Kaushik Sandipan, Sonebi Mohammed, Amato Giuseppina, Perrot Arnaud et al. (2022-02)
     Influence of Nano-Clay on the Fresh and Rheological Behavior of 3D Printing Mortar
126. Sangiorgio Valentino, Parisi Fabio, Fieni Francesco, Parisi Nicola (2022-01)
     The New Boundaries of 3D-Printed Clay-Bricks-Design:
     Printability of Complex Internal Geometries
127. Bruce Mackenzie, Clune Gabrielle, Xie Ruxin, Mozaffari Salma et al. (2021-11)
     Cocoon:
     3D Printed Clay Formwork for Concrete Casting
128. Douba Ala, Kawashima Shiho (2021-11)
     Use of Nano-Clays and Methylcellulose to Tailor Rheology for Three-Dimensional Concrete Printing
129. Sonebi Mohammed, Dedenis Marie, Abdalqader Ahmed, Perrot Arnaud (2021-11)
     Effect of Red Mud, Nano-Clay, and Natural Fiber on Fresh and Rheological Properties of Three-Dimensional Concrete Printing
130. Zhu He, Yu Kequan, McGee Wesley, Ng Tsz et al. (2021-11)
     Limestone-Calcined-Clay-Cement for Three-Dimensional Printed Engineered Cementitious Composites
131. Wolf Alexander, Rosendahl Philipp, Knaack Ulrich (2021-10)
     Additive Manufacturing of Clay and Ceramic Building Components
132. Abdallah Yomna, Estévez Alberto (2021-10)
     3D Printed Biodigital Clay Bricks
133. Wang Yu, Jiang Yaqing, Pan Tinghong, Yin Kangting (2021-08)
     The Synergistic Effect of Ester-Ether Copolymerization Thixo-Tropic Superplasticizer and Nano-Clay on the Buildability of 3D Printable Cementitious Materials
134. Chen Yu, He Shan, Zhang Yu, Wan Zhi et al. (2021-08)
     3D Printing of Calcined-Clay-Limestone-Based Cementitious Materials
135. Long Wujian, Lin Can, Tao Jie-Lin, Ye Taohua et al. (2021-02)
     Printability and Particle-Packing of 3D Printable Limestone-Calcined-Clay-Cement Composites
136. Chen Yu, Jansen Koen, Zhang Hongzhi, Rodríguez Claudia et al. (2020-07)
     Effect of Printing-Parameters on Inter-Layer Bond Strength of 3D Printed Limestone-Calcined-Clay-Based Cementitious Materials:
     An Experimental and Numerical Study
137. Varela Hugo, Barluenga Gonzalo, Palomar Irene (2020-07)
     Rheology Evaluation of Cement-Paste with Nano-Clay , Nano-Silica and Polymeric Admixtures for Digital Fabrication
138. Chen Yu, Rodríguez Claudia, Li Zhenming, Chen Boyu et al. (2020-07)
     Effect of Different Grade Levels of Calcined Clays on Fresh and Hardened Properties of Ternary-Blended Cementitious Materials for 3D Printing
139. Manikandan Karthick, Jiang Xuepeng, Singh Amit, Li Beiwen et al. (2020-06)
     Effects of Nozzle Geometries on 3D Printing of Clay Constructs:
     Quantifying Contour-Deviation and Mechanical Properties
140. Chen Yu, Figueiredo Stefan, Li Zhenming, Chang Ze et al. (2020-03)
     Improving Printability of Limestone-Calcined-Clay-Based Cementitious Materials by Using Viscosity-Modifying Admixture
141. Panda Biranchi, Ruan Shaoqin, Unluer Cise, Tan Ming (2020-01)
     Investigation of the Properties of Alkali-Activated Slag Mixes Involving the Use of Nano-Clay and Nucleation-Seeds for 3D Printing
142. Wi Kwangwoo, Suresh Vignesh, Wang Kejin, Li Beiwen et al. (2019-12)
     Quantifying Quality of 3D Printed Clay Objects Using a 3D Structured Light Scanning System
143. Kontovourkis Odysseas, Tryfonos George (2019-11)
     Robotic 3D Clay Printing of Prefabricated Non-Conventional Wall Components Based on a Parametric-Integrated Design
144. Kontovourkis Odysseas, Tryfonos George, Georgiou Christos (2019-06)
     Robotic Additive Manufacturing (RAM) with Clay Using Topology-Optimization Principles for Tool-Path-Planning:
     The Example of a Building Element
145. Chen Yu, Li Zhenming, Figueiredo Stefan, Çopuroğlu Oğuzhan et al. (2019-04)
     Limestone and Calcined-Clay-Based Sustainable Cementitious Materials for 3D Concrete Printing:
     A Fundamental Study of Extrudability and Early-Age Strength Development
146. Chen Yu, Figueiredo Stefan, Yalçınkaya Çağlar, Çopuroğlu Oğuzhan et al. (2019-04)
     The Effect of Viscosity-Modifying Admixture on the Extrudability of Limestone and Calcined-Clay-Based Cementitious Material for Extrusion-Based 3D Concrete Printing
147. Panda Biranchi, Ruan Shaoqin, Unluer Cise, Tan Ming (2018-11)
     Improving the 3D Printability of High-Volume Fly-Ash Mixtures via the Use of Nano-Attapulgite-Clay
148. Im Hyeonji, Othman Sulaiman, Castillo Jose (2018-10)
     Responsive Spatial Print:
     Clay 3D Printing of Spatial Lattices Using Real-Time Model-Recalibration
149. Ma Siwei, Kawashima Shiho (2018-09)
     Rheological and Water Transport Properties of Cement-Pastes Modified with Diutan Gum and Attapulgite-Palygorskite-Nano-Clay for 3D Concrete Printing
150. Qian Ye, Schutter Geert (2018-06)
     Enhancing Thixotropy of Fresh Cement-Pastes with Nano-Clay in Presence of Polycarboxylate-Ether Superplasticizer (PCE)
151. Rael Ronald, Fratello Virginia (2017-11)
     Clay Bodies:
     Crafting the Future with 3D Printing
152. Kontovourkis Odysseas, Tryfonos George (2017-07)
     Integrating Parametric Design with Robotic Additive Manufacturing for 3D Clay Printing:
     An Experimental Study
153. Beigh Mirza, Nerella Venkatesh, Schröfl Christof, Mechtcherine Viktor (2015-06)
     Studying the Rheological Behavior of Limestone-Calcined-Clay-Cement (LC3) Mixtures in the Context of Extrusion-Based 3D Printing