Skip to content

#low

Keywords by Co - Occurrence

  1. Elleuch Sourour, Carré Hélène, Borderie Christian (2026-04)
    Adaptation of Low Environmental Impact Mortar Formulations for 3D Printing
  2. Lu Pengyuan, Yang Yekai, Zhao Qingxin, Liu Zhongxian et al. (2026-03)
    Low-Carbon 3D-Printed Geopolymer Ultra-High-Strength Concrete Enabled by Soda Residue:
    Sustainable Development and Environmental Impact Assessment
  3. Dewi Melati, Wang Wei-Chien, Lin Wei-Ting (2026-03)
    Development of Low-Thermal-Conductivity Fly Ash Geopolymer Foam Mortars with Stabilizer Effects and 3D Printability Assessment
  4. Šerelis Evaldas, Vaitkevičius Vitoldas, Korat Bensa Lidija, Serjun Vesna et al. (2026-03)
    Effect of Chemical and Physico-Chemical Activation on the Properties of 3D Printed Concrete with a Low-Cement Multicomponent Binder
  5. Wolf Cordula, Pott Ursula, Jansen Daniel, Stephan Dietmar et al. (2026-03)
    Tailored Yield Stress for 3D Printing Using Low-Clinker Cement
  6. Cheng Hanbin, Duarte José, Memari Ali, Bilén Sven et al. (2026-02)
    Recycled Cork Aggregate for 3D Concrete Printing:
    Rheology, Pore-Driven Anisotropy Mitigation, and Low-Carbon Thermal Buffering
  7. Nguyen Vuong, Jie Cheah, Lao Junying, Huanyu Zhao et al. (2026-02)
    Experimental and Multi-Scale Modelling Investigation of Printable, Low-Cement Engineered Cementitious Composites with Different Polyethene Fiber Contents
  8. Ding Shengxuan, Li Jiren, Wang Mingqiang (2026-02)
    Mechanical Performance and Life-Cycle Carbon Reduction Benefits of 3D-Printed Permanent-Formwork Columns Filled with Low-Magnesia Concrete
  9. Catenacci Matthew, Owens Jeffery, Johnson Glenn, Nikon Charles (2026-02)
    Piston Press Extrusion as a Low-Cost Screening Tool for Cementitious Formulations in 3D Concrete Printing
  10. Garshasbi Sajad, Mousavi Seyed, Nazarpour Hadi, Dehestani Mehdi (2026-02)
    Low Carbon Dioxide 3D Printable Concrete:
    Balancing Rheology, Strength and Environmental Impact Using Bentonite and Ground Granulated Blast-Furnace Slag
  11. Hasan Kamrul, Alias Aizat, Hasan Mehedi, Yahaya Fadzil et al. (2026-02)
    Designing 3D-Printed Concrete with Ternary Blended Mortars Incorporating Fly Ash and Silica Fume:
    Effects of Low Water-Binder Ratios on Workability and Strength
  12. Bong Shin, Zhao Yasong, Gao Yangyunzhi, Du Hongjian (2026-01)
    High-Volume Glass Powder Cementitious Material for Low-Carbon Concrete Additive Manufacturing
  13. Paul Aranya, Manosalvas Holst Carlos, Berryman Charles, Friedland Carol et al. (2026-01)
    Development of Sustainable Low-Cement Construction 3D Printing Materials via Dense Particle Packing
  14. Sapata Alise, Spuriņa Ella, Alzard Mohammed, Šlosbergs Pēteris et al. (2026-01)
    Low-CO2 Concrete from Oil Shale Ash and Construction Demolition Waste for 3D Printing
  15. Nguyen Vuong, Jie Cheah, Lao Junying, Huanyu Zhao et al. (2026-01)
    Performance of Lightweight, Reinforced, and Assemblable 3D-Printed Concrete Columns with Low-Carbon Engineered Cementitious Composites
  16. Federowicz Karol, Sibera Daniel, Tošić Nikola, Zieliński Adam et al. (2026-01)
    Early-Age Shrinkage Monitoring of 3D-Printed Cementitious Mixtures: Comparison of Measuring Techniques and Low-Cost Alternatives
  17. Mu Xiaoshao, Zhang Xiaoling, He Gang, Liew Kim (2026-01)
    Toward Low-Carbon 3D Concrete Printing Through Circular Construction and Waste Valorization
  18. Zhang Chao, Zhang Junyi, Su Yilin, Zhang Yuying et al. (2026-01)
    Low-Carbon 3D-Printed Concrete by Using Biochar as a Carbon Sequestrator
  19. Talukdar A., Belek Fialho Teixeira Müge, Fawzia Sabrina, Zahra Tatheer et al. (2026-01)
    Investigation on the Fresh and Mechanical Properties of Low Carbon 3D Printed Concrete Incorporating Sugarcane Bagasse Ash and Microfibers
  20. Wang Hanmo, Wan Yujia, Owyong Shawn, Connie Lim En et al. (2026-01)
    Towards Low-Carbon Construction:
    Nature-Inspired Internal Patterns for Thermal Insulation in Lightweight Concrete Component Cast Using 3D-Printed Formwork
  21. Zhu Binrong, Qi Miao, Chen Wei, Pan Jinlong (2025-12)
    Anisotropic Mechanical Properties of 3D Printed Low-Carbon Concrete and Connection Strategies for Large-Scale Reusable Formwork in Digital Construction
  22. Liu Xuelin, Kong Jiafeng, Chen Yidong, Wang Liang et al. (2025-12)
    Rheology and Printability Control of Low-Carbon 3D-Printed Cementitious Materials via Circular Use of Recycled Concrete Powder
  23. Bradshaw James, Balasubramanian Swathi, Si Wen, Khan Mehran et al. (2025-10)
    Towards Greener 3D Printing:
    A Performance Evaluation of Silica Fume-Modified Low-Carbon Concrete
  24. Wei Jingjie, Khayat Kamal (2025-10)
    Effect of Chemical Additives on Performance of Low-Clinker 3D Printing Mortar
  25. Shekhar Shashank, Kumar Manish, Mathur Rishabh (2025-10)
    Additive Manufacturing of Concrete with Low Initial Yield Strength Through Controlled Heating of Printed Layers
  26. Zhou Juanlan, Shi Xiangwen, Zheng Hongrun, Jin Ruoyu et al. (2025-09)
    Investigating the Effects of Hybrid PVA/BF Fibers in Low-Carbon 3D Printed Concrete with Recycled Aggregates:
    Rheology, Strength, and Anisotropy
  27. Alonso-Cañon Sara, Alonso-Estebanez Alejandro, Yoris-Nobile Adrian, Brunčič Ana et al. (2025-08)
    Rheological Parameter Ranges for 3D Printing Sustainable Mortars Using a New Low-Cost Rotational Rheometer
  28. Abedi Mohammadmadhi, Waris Muhammad, Alawi Mubarak, Jabri Khalifa (2025-08)
    Transformative Low-Carbon 3D-Printed Infrastructure:
    Machine Learning-Driven Self-Sensing and Self-Heating Limestone Calcined Clay Cement (LC3) Composites
  29. Shi Ye, You Ge, Wu Pengtao, Liu Zhongxian et al. (2025-07)
    Effect of Water Film and Paste Film Thicknesses on Printability of 3D Printed Low Cement UHPC
  30. Noaimat Yazeed, Chougan Mehdi, Sambucci Matteo, Valente Marco et al. (2025-06)
    Optimising Limestone Calcined Clay Cement Containing Excavated Low-Grade Waste Clay for 3D Printing Applications
  31. Ye Huzi, He Qianpeng, Ping Pengxin, Pan Jinlong et al. (2025-06)
    Anisotropic Flexural Behavior and Energy Absorption of 3D Printed Engineered Cementitious Composites (3DP-ECC) Beams Under Low-Velocity Impact
  32. Surehali Sahil, Venkatachalam Akshay, Divigalpitiya Ranjith, Kumar Aditya et al. (2025-06)
    Ultra-Low Dosages of Novel Graphene Types Enhance the Rheological Properties and Buildability of 3D Printed Binders
  33. Kumar Sandeep, Kumar Abhishek, Pundir Aakanksha, Dwivedi Ashutosh et al. (2025-06)
    Low-Clay Soil as Fine Aggregate in 3D Printed Concrete:
    Insights into Fresh and Hardened Properties
  34. Aly Ahmed Aly, Mantawy Islam (2025-05)
    Additive Construction of Low Embodied Carbon Concrete:
    Geopolymer Concrete
  35. Sapata Alise, Šinka Māris, Puzule Līga, Plūmiņš Ernests et al. (2025-05)
    Developing Low-CO₂ 3D-Printable Concrete with Waste Ash and Recycled Aggregates
  36. Wang Guihua, Zhou Jiguo, Liu Haoyun, Zhang Jianming (2025-05)
    Rheological Properties and Mechanical Durability of 3D-Printed Concrete Based on Low-Field NMR
  37. Deng Yongjie, Li Nan, Zhong Jianjun, Liang Yun et al. (2025-04)
    Ultrafast-Setting Magnesium Phosphate Cement Prepared from Low-Burned Magnesium Oxide for Mixed Stirring Extrusion Function Integrated 3D Printing Applications
  38. Temirzakuly Bakbergen, Nurgaliuly Dias, Kim J., Shehab Essam et al. (2025-04)
    Development of Cost-Effective Geopolymer Mortars from Low-Grade Metakaolin and Bottom Ash for 3D Construction Printing
  39. Noaimat Yazeed, Chougan Mehdi, Seidy Eslam, Albar Abdulrahman et al. (2025-04)
    Optimizing Limestone Calcined Clay Cement for Enhanced 3D Printing Performance of Low-Carbon Materials
  40. Zhu Binrong, Zhang Yuhang, Ye Huzi, Wei Yang et al. (2025-03)
    Low-Velocity Impact Performance of Biomimetic 3D Printed Engineered Cementitious Composites Beams
  41. Sharma Shivam, Tahlawi M., Delavar Mohammad, Sideris Petros (2025-03)
    Structural Design Methodology for Low-Rise 3D Printed Concrete (3DPC) Buildings Subjected to Non-Seismic Loading:
    Description, Application and Validation
  42. Das Arnesh, Wenger Cedric, Walpen Lukas, Flatt Robert (2025-02)
    Early-Age Hydration of Accelerated Low-Carbon Cements for Digital Fabrication
  43. Liu Qiang, Jiang Quan, Zhao Herui, Yu Yang et al. (2025-02)
    Porous Diatomite Promotes Lightweight and Low-Carbon Concrete 3D Printing:
    An Exploratory Study
  44. Posani Magda, Voney Vera, Odaglia Pietro, Du Yi et al. (2025-01)
    Low-Carbon Indoor Humidity Regulation via 3D Printed Superhygroscopic Building Components
  45. Obermeier Nico, Richter Christiane, Wiese Felix, Stengel Thorsten (2025-01)
    Low Global-Warming-Potential and Resource-Efficient 3D Printing Cement-Based Concrete
  46. Kopitha Kirushnapillai, Rajeev Pathmanathan, Sanjayan Jay, Elakneswaran Yogarajah (2024-12)
    CO2 Sequestration and Low-Carbon-Strategies in 3D Printed Concrete
  47. Wang Qingwei, Han Song, Liu Qi, Yang Junhao et al. (2024-12)
    Research on the 3D Printing Process and Filament Shape of Cementitious Materials in Low Gravity
  48. Silvestro Laura, Ribeiro Rodrigo, Navarrete Iván (2024-12)
    Advancements in Low Carbon-Emission Cements for 3D Printing:
    A State-of-the-Art Review
  49. Curth Alexander, Alvarez Eduardo, Sass Lawrence, Norford Leslie et al. (2024-11)
    Additive Energy:
    3D Printing Thermally Performative Building Elements with Low-Carbon Earthen Materials
  50. Bono Victor, Ducoulombier Nicolas, Loulha Sarena, Mesnil Romain et al. (2024-11)
    Toward 3D Printable Low-Carbon Mortar:
    Method and Application
  51. Federowicz Karol, Cendrowski Krzysztof, Sikora Paweł (2024-10)
    Low-Carbon Cementitious Composite Incorporated with Biochar and Recycled Fines Suitable for 3D Printing Applications:
    Hydration, Shrinkage and Early-Age Performance
  52. Maury-Ramírez Aníbal, Rinke Mario, Blom Johan (2024-09)
    Low-Carbon Embodied, Self-Cleaning, and Air-Purifying Building Envelope Components Using TiO2 Photocatalysis, 3D Printing, and Recycling
  53. Jin Willy, Roux Charlotte, Ouellet-Plamondon Claudiane, Caron Jean-François (2024-09)
    Life Cycle Assessment of Limestone-Calcined-Clay-Concrete:
    Potential for Low-Carbon 3D Printing
  54. Padilla-Encinas Pilar, Fernández Raúl, Cuevas Jaime, Marieta Cristina et al. (2024-09)
    Low-Carbon Footprint Magnesium-Phosphate-Cement for 3D Concrete Printing
  55. Jongvisuttisun Passarin, Chaiyapoom Phattarakamon, Jiramarootapong Patiphat, Meemuk Kornravee et al. (2024-09)
    The Second 3D Printed Prefabricated Prefinished Volumetric Construction Building in Thailand:
    A New Sustainable and Efficient Approach for a Low-Rise Prefab Modular Building
  56. Palomba Martina, Esposito Laura, Villani Chiara, Wagner Eckhard (2024-09)
    Environmental Conditions Affecting the Shrinkage Behavior of Low Clinker 3D Printable Mortar
  57. Corfe Ian (2024-09)
    A Digital Library for Using Mine-Tailings in Low-Carbon Concrete Replacements for Mine Back-Filling & 3D Printing
  58. Asensio Eloy, Fenàndez F., Cabello Z., Álvarez O. et al. (2024-09)
    Low-Clinker ECC Materials Using Biomass Ash for 3D Printing
  59. Colyn Markus, Babafemi Adewumi, Zijl Gideon (2024-09)
    Advancements in Sustainability of 3D Concrete Printing:
    Presenting Low-Carbon Mixtures for Additively Manufactured Concrete Structures in Practice
  60. Noaimat Yazeed, Ghaffar Seyed (2024-09)
    Exploring Low-Carbon Cementitious Materials for 3D Printing Applications:
    A Comparison Between Limestone-Calcined-Clay-Cement and One-Part Alkai-Activated Material
  61. Bono Victor, Ducoulombier Nicolas, Mesnil Romain, Caron Jean-François (2024-09)
    Tailored Low-Carbon Footprint Cementitious Material for 3D Printing:
    Strategies for Rheology Adjustment and Mechanical Performance Estimation
  62. Obermeier Nico, Brunner Kim, Wiese Felix, Stengel Thorsten (2024-09)
    Development of Low-Cement Lightweight Concrete Mixes for 3D Extrusion Printing
  63. Oliveira Romano Roberto, Lima Francisco, Mesquita José, Pan Eduardo et al. (2024-09)
    Extended Rheological Characterization as a Tool for Low-Binder 3D Printing Compositions
  64. Khan Mehran, McNally Ciaran (2024-09)
    A Review of Developments in Low-Carbon 3D Printed Concrete in Europe:
    Steps Towards Sustainable Construction
  65. Perrot Arnaud, Jacquet Yohan, Caron Jean-François, Mesnil Romain et al. (2024-08)
    Snapshot on 3D Printing with Alternative Binders and Materials:
    Earth, Geopolymers, Gypsum and Low-Carbon Concrete
  66. Jia Lutao, Niu Geng, Dong Enlai, Jiang Yifan et al. (2024-08)
    Optimization-Strategy for Incorporating Recycled Brick-Powder in 3D Printed Concrete by Balancing Low-Carbon Footprint and Enhanced Performance
  67. Jiang Shangjin, Wang Yuntao, Hua Sudong, Yue Hongfei et al. (2024-08)
    Preparation and Performance Characterization of Low-Density 3D Printed Expanded Perlite-Foam-Concrete
  68. Hanratty Niall, Khan Mehran, McNally Ciaran (2024-07)
    The Role of Different Clay Types in Achieving Low-Carbon 3D Printed Concretes
  69. Liu Xuan, Chen Xianrui, Leung Gordon, Sham Ivan (2024-07)
    3D Printable Low-Carbon Concrete with Nano-Silica Pretreated Recycled Fine Aggregates
  70. Cui Weijiu, Shen Liang, Ji Dongsheng, Liu Wenliang et al. (2024-07)
    Mechanical Performance and Permeability of Low-Carbon Printable Concrete
  71. Raza Muhammad, Besklubova Svetlana, Zhong Ray (2024-07)
    Economic Analysis of Offsite and Onsite 3D Construction Printing Techniques for Low-Story Buildings:
    A Comparative Value-Stream-Assessment
  72. Ghaffar Seyed, Noaimat Yazeed, Chougan Mehdi, Kheetan Mazen (2024-06)
    Emerging Resources for the Development of Low-Carbon Cementitious Composites for 3D Printing Applications
  73. Bong Shin, Du Hongjian (2024-06)
    Sustainable Additive Manufacturing of Concrete with Low-Carbon Materials
  74. Assunção Badan Julie, Chadha Kunaljit, Vasey Lauren, Brumaud Coralie et al. (2024-06)
    Contribution of Production Processes in Environmental Impact of Low-Carbon Materials Made by Additive Manufacturing
  75. Khan Mehran, McNally Ciaran (2024-05)
    Recent Developments on Low-Carbon 3D Printing Concrete:
    Revolutionizing Construction Through Innovative Technology
  76. Singh Aman, Digi Rohan, Mishra Ruby, Mohanty Rajiva et al. (2024-05)
    The Design and Development of a Low Cost 3D Concrete Printer
  77. Wangler Timothy, Vangen Kathrina, Burger Joris, Flatt Robert (2024-05)
    Digital Fabrication Material-Processing-Strategy for Bespoke Low-Clinker Mass-Concrete Components
  78. Yang Jin, Zhai Gaoyuan, He Xingyang, Tang Yuanzhen et al. (2024-05)
    Properties and Microstructure of a Low-Carbon Clinker-Free Cementitious Binder and Its Extrusion-Based Printing Performance
  79. Curth Alexander, Alvarez Eduardo, Feickert Kiley, Mueller Caitlin et al. (2024-04)
    Multi-Material Fabrication for Low-Carbon Construction:
    An Optimised Floor System for Affordable Housing in Mexico
  80. Zhu Lingli, Zhao Wanting, Zhao Yu, Guan Xuemao (2024-03)
    Mechanism Analysis of Rheological Properties of 3D Printed Steel-Slag Cementitious Composite Based on Low-Field Nuclear-Magnetic-Relaxation-Test
  81. Souza Eduarda, Ribeiro Borges Paulo, Stengel Thorsten, Nematollahi Behzad et al. (2024-03)
    3D Printed Sustainable Low-Cost Materials for Construction of Affordable Social Housing in Brazil:
    Potential, Challenges, and Research Needs
  82. Geng Songyuan, Luo Qiling, Cheng Boyuan, Li Lixao et al. (2024-02)
    Intelligent Multi-Objective Optimization of 3D Printing Low-Carbon Concrete for Multi-Scenario Requirements
  83. Silva Guido, Quispe Axcel, Baldoceda Jordan, Kim Suyeon et al. (2024-02)
    Additive Construction of Concrete Deep Beams Using Low-Cost Characterization Methods and FEM-Based Topological Optimization
  84. Zhou Wen, Zhu He, Hu Wei-Hsiu, Wollaston Ryan et al. (2024-02)
    Low-Carbon, Expansive Engineered Cementitious Composites (ECC) In the Context of 3D Printing
  85. Zhang Hongmei, Hu Fan, Duan Yuanfeng, Liao Jian et al. (2024-02)
    Mechanical Properties and Micro-Structure of Highly Flowable Geopolymer Composites with Low-Content Polyvinyl-Alcohol-Fiber
  86. Bono Victor, Ducoulombier Nicolas, Mesnil Romain, Caron Jean-François (2023-12)
    Methodology for Formulating Low-Carbon Printable Mortar Through Particles-Packing-Optimization
  87. Natanzi Atteyeh, McNally Ciaran (2023-12)
    Experimental Investigation of Low-Carbon 3D Printed Concrete
  88. Naboni Roberto, Zomparelli Alessandro, Kunic Anja, Breseghello Luca (2023-11)
    Design, Robotic Fabrication and Augmented Construction of Low-Carbon Concrete Slabs Through Field-Based Reaction-Diffusion
  89. Coward Andy, Sørensen Jesper (2023-09)
    MINIMASS:
    A New Approach for Low-Carbon, Low-Cost 3D Printed Concrete Beams
  90. Sukontasukkul Piti, Khomkum Sila, Maho Buchit, Fujikake Kazunori (2023-09)
    Printability and Shape Stability of Cement Mortar Incorporating Low Volume of Micro-Polypropylene Fiber for 3D Printing Application
  91. Villaquirán-Caicedo Mónica, Fernández-González Alejandro, Fernández-García Daniel, Gutiérrez Ruby (2023-07)
    Valorization of a Low-Quality Coal-Ash, in the Preparation of Alkali-Activated Inks for Applications in 3D Additive Manufacturing
  92. Zhao Yasong, Gao Yangyunzhi, Chen Gaofeng, Li Shujun et al. (2023-04)
    Development of Low-Carbon Materials from GGBS and Clay-Brick-Powder for 3D Concrete Printing
  93. Cui Weijiu, Wang Tianheng, Chen Xu, Shen Wenkai et al. (2023-03)
    Study of 3D Printed Concrete with Low-Carbon Cementitious Materials Based on Its Rheological Properties and Mechanical Performances
  94. Li Xiao-Sheng, Li Long, Zou Shuai (2023-02)
    Developing Low-pH 3D Printing Concrete Using Solid Wastes
  95. Oval Robin, Nuh Mishael, Costa Eduardo, Madyan Omar et al. (2023-01)
    A Prototype Low-Carbon Segmented Concrete Shell Building Floor System
  96. Noaimat Yazeed, Ghaffar Seyed, Chougan Mehdi, Kheetan Mazen (2022-12)
    A Review of 3D Printing Low-Carbon Concrete with One-Part Geopolymer:
    Engineering, Environmental and Economic Feasibility
  97. Zhang Chao, Jia Zijian, Luo Zhe, Deng Zhicong et al. (2022-11)
    Printability and Pore-Structure of 3D Printing Low-Carbon Concrete Using Recycled Clay-Brick-Powder with Various Particle-Features
  98. Chougan Mehdi, Ghaffar Seyed, Nematollahi Behzad, Sikora Paweł et al. (2022-09)
    Effect of Natural and Calcined-Halloysite-Clay-Minerals as Low-Cost-Additives on the Performance of 3D Printed Alkali-Activated Materials
  99. Hynek Estelle, Bulteel David, Urquizar Antoine, Rémond Sébastien (2022-06)
    Formulation and Characterization of a Low-Carbon Impact Cementitious Ink for 3D Printing
  100. Rusike Rutendo, Sataya Michael, Marsh Alastair, Cavalaro Sergio et al. (2022-06)
    Accelerating Early-Age Properties of Ultra-Low Clinker Cements for Extrusion-Based 3D Printing
  101. Klyuev Sergey, Klyuev Alexander, Fediuk Roman, Ageeva Marina et al. (2022-04)
    Fresh and Mechanical Properties of Low-Cement Mortars for 3D Printing
  102. Ranaudo Francesco, Mele Tom, Block Philippe (2021-09)
    A Low-Carbon, Funicular Concrete Floor System:
    Design and Engineering of the HiLo Floor
  103. Canou Joseph, Uhart Maylis, Diaz Pierre (2021-02)
    A “Low-Cost” Subtractive Method for Freshly Finished 3D Concrete Printed Structures
  104. Kruger Jacques, Zeranka Stephan, Zijl Gideon (2019-07)
    3D Concrete Printing:
    A Lower-Bound Analytical Model for Buildability-Performance-Quantification
  105. Chen Yu, Veer Frederic, Çopuroğlu Oğuzhan, Schlangen Erik (2018-09)
    Feasibility of Using Low CO2 Concrete Alternatives in Extrusion-Based 3D Concrete Printing
  106. Chen Yu, Çopuroğlu Oğuzhan, Veer Frederic (2018-01)
    A Critical Review of 3D Concrete Printing as a Low-CO2 Concrete Approach
  107. Perrot Arnaud, Mélinge Yannick, Rangeard Damien, Micaelli Francesca et al. (2012-06)
    Use of Ram Extruder as a Combined Rheo-Tribometer to Study the Behavior of High-Yield-Stress Fluids at Low Strain-Rate