Skip to content

#cast

Keywords by Co - Occurrence

  1. Gan Qili, Tao Qin, Liu Nana, Ruan Chunfeng et al. (2026-02)
    Comparative Analysis of Compressive Performance Between 3D Printed and Cast-in-Place Cement-Based Materials
  2. Kocaer Öznur (2026-02)
    Environmental Assessment of Waste-Derived Materials in 3D Concrete Printing and Cast-in-Place Construction Through a BIM-Integrated Multi-Scale Life Cycle Assessment Framework
  3. Sawicki Bartłomiej, Chen Zhuo, Leusmann Thorsten, Kloft Harald (2026-01)
    Shotcrete 3D Printed Reinforced Concrete Beam:
    Design, Testing, and Comparison Against Conventional Cast Reinforced Concrete Solution
  4. Wang Hanmo, Wan Yujia, Owyong Shawn, Connie Lim En et al. (2026-01)
    Towards Low-Carbon Construction:
    Nature-Inspired Internal Patterns for Thermal Insulation in Lightweight Concrete Component Cast Using 3D-Printed Formwork
  5. Jenny David, Cutajar Sacha, Chan Yen-Fen, Jenny Ercan et al. (2026-01)
    Earth-to-Earth:
    Ultra-Thin 3D-Printed Clay Formwork for in-Situ Earth-Casting
  6. Bang Jin, Ha Seong, Jun Yubin, Yim Hong (2025-12)
    Optimal Casting Window Defined by Electrical Resistivity for Enhancing Interfacial Bond Strength in 3D Printed-Cast Concrete Composites
  7. Saelens Lien, Tittelboom Kim, Wan-Wendner Roman, Caspeele Robby (2025-07)
    Experimental and Numerical Quantification of the Structural Capacity of Hybrid 3D Printed and Cast Concrete Beams After Topology Optimization
  8. Saelens Lien, Tittelboom Kim, Caspeele Robby, Wan-Wendner Roman (2025-06)
    Experimental Analysis of the Structural Behavior of Hybrid Concrete 3D Printed-Cast Beam Systems
  9. Bai Meiyan, Xiao Jianzhuang, Ding Tao, Yu Kequan (2024-12)
    Interfacial Bond-Properties Between 3D Printed Engineered Cementitious Composite and Post-Cast Concrete
  10. Nunes Lavynia, Miranda Freitas Juan Oliveira, Abud Vilanova João, Rubin Ariane (2024-12)
    Comparative Analysis of the Construction Feasibility of Special Works of Art Using 3D Concrete Printing, Prefabricated Concrete, and Cast In-Situ
  11. Khan Muhammad, Varadharajan Tharanesh, Keller Zachary, Meibodi Mania (2024-11)
    BioMatters:
    The Robotic 3D-Printed Biodegradable Wood-Based Formwork for Cast-in-Place Concrete Structures
  12. Wagner Juliana, Silveira Marcos, Vanderlei Romel, Das Sreekanta (2024-10)
    Comparative Analysis of Mold-Cast and 3D Printed Cement-Based Components:
    Implications for Standardization in Additive Construction
  13. Lindner Marco, Gliniorz Ralf, Funke Henrik, Männel Mike et al. (2024-10)
    Tool-Development for Pre-Cast Concrete Elements in Robot-Assisted Flow-Production
  14. Rudolph Enrico, Schönfelder Daniel, Funke Henrik, Gelbrich Sandra (2024-10)
    Efficient Production of Pre-Cast Concrete Staircases Using Additive-Manufactured, Component-Integrated Formworks Systems
  15. Schweizer Katie, Bhandari Sunil, Lopez-Anido Roberto, Korey Matthew et al. (2024-09)
    Recycling Large-Format 3D Printed Polymer Composite Formworks Used for Casting Pre-Cast Concrete:
    Technical Feasibility and Challenges
  16. Cook Kieron, Çapunaman Özgüç, Gürsoy Benay (2024-09)
    Robotic Sand Shaping for Reusable Formworks:
    From Tool-Path Design to Emergent Shapes and Patterns in Cast Form
  17. Hlaváček Petr, Kolsch Nico, Zocca Andrea, Kühne Hans-Carsten et al. (2024-09)
    Additive Manufacturing of Alkali-Activated Materials by Laser-Induced Slip Casting
  18. Gürel Şeyma, Chen Wei-Ting, Wangler Timothy, Lloret-Fritschi Ena et al. (2024-09)
    Scaling up in Digital Casting of Concrete:
    Towards Industry Integration
  19. Rudolph Enrico, Schönfelder Daniel, Funke Henrik, Gelbrich Sandra (2024-09)
    Efficient Production of Reinforced Pre-Cast Concrete Elements Using Additive Manufactured, Integrated Formwork
  20. Böhler David, Mai (née Dressler) Inka, Lowke Dirk (2024-09)
    Durability of 3D Printed Concrete:
    A Comparison of Extrusion 3D Printing, Shotcrete 3D Printing and Conventional Casting
  21. Park Gwang, Kim Jae (2024-09)
    Optimization Shape Stability for Printed Pre-Cast Column Using Matric-Suction-Effect
  22. Qiu Minghong, Sun Yan, Qian Ye (2024-09)
    Impact of Groove-and-Tongue Parameters on the Bonding Behavior Between 3D Printed UHP-SHCC and Cast Normal Concrete
  23. Vatandoost Mohsen, McGee Wesley, Buelow Peter (2024-08)
    Ultra-Thin-Layered 3D Printed Hollow-Core Sections for Concrete Casting
  24. Zuo Wenqiang, Caneda-Martínez Laura, Keita Emmanuel, Aimedieu Patrick et al. (2024-08)
    Drying-Induced Damages in Exposed Fresh Cement-Based Materials at Very Early-Ages:
    From Standard Casting to 3D Printing
  25. Qiu Minghong, Qian Ye, Sun Yan, Leung Christopher (2024-07)
    Flexural Performance of Concrete Beams via 3D Printing Stay-in-Place Formwork Followed by Casting of Normal Concrete
  26. Berawi Mohammed, Sari Mustika, Oktaviani Astiti, Miraj Perdana et al. (2024-05)
    Impact of BIM and 3D Printing Technologies on Production Process and Productivity of Pre-Cast Concrete in Construction Project
  27. Qiu Minghong, Sun Yan, Qian Ye (2023-12)
    Interfacial Bonding Performance of 3D Printed Ultra-High-Performance Strain-Hardening Cementitious Composites and Cast Normal Concrete
  28. Imagawa Koichi, Ohno Motohiro, Ishida Tetsuya (2023-11)
    An Experimental Study on Energy-Absorption-Capability of Cast and 3D Printed Architected Cement-Based Materials
  29. Fu Yanan, Zhang Ying, Wu Lei (2023-11)
    Experimental Study on Structural Performance of Cast-in-Place Frame Printed Concrete Wall
  30. Li Mingyang, Zhang Dong, Wong Teck, Tan Ming et al. (2023-09)
    Modeling and Experimental Investigation of Fiber Orientation in Cast and 3D Printed Cementitious Composites
  31. Armstrong Kristina, Kamath Dipti, Zhao Xianhui, Rencheck Mitchell et al. (2023-07)
    Life Cycle Cost, Energy, and Carbon Emissions of Molds for Pre-Cast Concrete:
    Exploring the Impacts of Material-Choices and Additive Manufacturing
  32. Zhang Dan, Ma Guowei, Guan Jingyuan, Wang Li et al. (2023-06)
    Cyclic Behavior of Unbonded Post-Tensioned Pre-Cast Segmental Concrete Columns Fabricated by 3D Printed Concrete Permanent Formwork
  33. Mozaffari Salma, Bruce Mackenzie, Clune Gabrielle, Xie Ruxin et al. (2023-06)
    Digital Design and Fabrication of Clay Formwork for Concrete Casting
  34. Chen Yidong, Zhang Yu, Liu Zhiyong, Zhang Yunsheng et al. (2023-04)
    3D Printed Concrete Permanent Formwork:
    Effect of Post-Cast Concrete Proportion on Interface Bonding
  35. Zhao Kang, Hu Zhongjun, Wang Boxin, Li Quanheng et al. (2023-01)
    Effect of Roughness and Adhesive on the Strength of Concrete-to-Concrete Interfaces Cast from 3D Printed Prefabricated Plastic Formworks
  36. Sambucci Matteo, Biblioteca Ilario, Valente Marco (2023-01)
    Life Cycle Assessment (LCA) of 3D Concrete Printing and Casting Processes for Cementitious Materials Incorporating Ground Waste Tire Rubber
  37. Chun Seung-Yeop, Kim Su-jin, Kim Woon-Gi, Lee Geumyeon et al. (2022-12)
    Powder-Bed-Based 3D Printing with Cement for Sustainable Casting
  38. Cao Xiangpeng, Yu Shiheng, Wu Shuoli, Cui Hongzhi (2022-11)
    Experimental Study of Hybrid Manufacture of Printing and Cast-in-Process to Reinforce 3D Printed Concrete
  39. Wang Li, Yang Yu, Hu Yuanyuan, Ma Guowei (2022-11)
    Interfacial Properties of Three-Dimensional-Printed Permanent Formwork with Cast-in-Place Concrete
  40. Mehdizadeh Samim, Zimmermann Adrian, Tessmann Oliver (2022-09)
    RotoColumn:
    A Continuous Digital Fabrication Framework for Casting Large-Scale Linear Concrete Hollow Elements
  41. Kompella Sriram, Monte Francesco, Bassani Andrea, Guanziroli Stefano et al. (2022-09)
    A Comparative Study of Hardened-State Mechanical Properties of 3D Printed and Conventionally Cast Fiber-Reinforced Concrete
  42. Bekaert Michiel, Tittelboom Kim, Schutter Geert (2022-08)
    3D Printed Concrete as Stay-in-Place Formwork:
    Mechanics During Casting and Curing
  43. Sikora Paweł, Techman Mateusz, Federowicz Karol, Khayatt Ahmed et al. (2022-07)
    Insight into the Microstructural and Durability Characteristics of 3D Printed Concrete:
    Cast versus Printed Specimens
  44. Lloret-Fritschi Ena, Quadranti Elia, Scotto Fabio, Fuhrimann Lukas et al. (2022-05)
    Additive Digital Casting:
    From Lab to Industry
  45. Stieler David, Schwinn Tobias, Menges Achim (2022-04)
    Additive Formwork in Pre-Cast Construction:
    Agent-Based Methods for Fabrication-Aware Modularization of Concrete Building Elements
  46. Ruffray Nicolas, Reiter Lex, Flatt Robert (2022-04)
    Overcoming Environmental Stress-Cracking of FDM 3D Printed Formwork for Counter-Pressure Casting of Concrete
  47. Liu Siyu, Lu Bing, Li Hongliang, Pan Zehua et al. (2022-03)
    A Comparative Study on Environmental Performance of 3D Printing and Conventional Casting of Concrete Products with Industrial Wastes
  48. Bruce Mackenzie, Clune Gabrielle, Xie Ruxin, Mozaffari Salma et al. (2021-11)
    Cocoon:
    3D Printed Clay Formwork for Concrete Casting
  49. Oktaviani Astiti, Berawi Mohammed (2021-07)
    Implementation of 3D Concrete Printing Technology in Pre-Cast Concrete Mass Production Industry
  50. Moini Mohamadreza, Baghaie Ahmadreza, Rodriguez Fabian, Zavattieri Pablo et al. (2021-06)
    Quantitative Microstructural Investigation of 3D Printed and Cast Cement-Pastes Using Micro-Computed Tomography- and Image-Analysis
  51. Li Hui, Meng Huamin, Lan Mingzhang, Zhou Jian et al. (2021-05)
    Development of a Novel Material and Casting-Method for In-Situ Construction on Mars
  52. Voney Vera, Odaglia Pietro, Brumaud Coralie, Dillenburger Benjamin et al. (2021-02)
    From Casting to 3D Printing Geopolymers:
    A Proof of Concept
  53. Battaglia Christopher, Miller Martin, Verian Kho (2020-07)
    Print-Cast Concrete:
    Additive Manufacturing for 3D Printing Mortar in Robotically Fabricated Green Sand Molds
  54. Pekuss Raitis, Soto Borja (2020-07)
    Preliminary Productivity-Analysis of Conventional, Pre-Cast and 3D Printing Production-Techniques for Concrete Columns with Simple Geometry
  55. Szabó Anna, Reiter Lex, Lloret-Fritschi Ena, Wangler Timothy et al. (2020-07)
    ACDC:
    The Admixture-Controlled Digital Casting and Its Application to Thin-Folded Concrete Structures
  56. Roussel Nicolas, Spangenberg Jon, Wallevik Jon, Wolfs Robert (2020-06)
    Numerical Simulations of Concrete Processing:
    From Standard Formative Casting to Additive Manufacturing
  57. Lloret-Fritschi Ena, Wangler Timothy, Gebhard Lukas, Mata-Falcón Jaime et al. (2020-05)
    From Smart Dynamic Casting to a Growing Family of Digital Casting Systems
  58. Szabó Anna, Reiter Lex, Lloret-Fritschi Ena, Gramazio Fabio et al. (2020-04)
    Mastering Yield-Stress-Evolution and Formwork-Friction for Smart Dynamic Casting
  59. Weng Yiwei, Li Mingyang, Ruan Shaoqin, Wong Teck et al. (2020-03)
    Comparative Economic, Environmental and Productivity-Assessment of a Concrete Bathroom Unit Fabricated Through 3D Printing and a Pre-Cast Approach
  60. Perrot Arnaud, Rangeard Damien (2019-04)
    3D Printing in Concrete:
    Techniques for Extrusion-Casting
  61. Szabó Anna, Reiter Lex, Lloret-Fritschi Ena, Gramazio Fabio et al. (2018-09)
    Adapting Smart Dynamic Casting to Thin-Folded Geometries
  62. Lloret-Fritschi Ena, Scotto Fabio, Gramazio Fabio, Kohler Matthias et al. (2018-09)
    Challenges of Real-Scale Production with Smart Dynamic Casting
  63. Scotto Fabio, Lloret-Fritschi Ena, Gramazio Fabio, Kohler Matthias et al. (2018-05)
    Adaptive Control-System for Smart Dynamic Casting:
    Defining Fabrication-Informed Design-Tools and Process-Parameters in Digital Fabrication-Processes
  64. Lloret-Fritschi Ena, Reiter Lex, Wangler Timothy, Gramazio Fabio et al. (2017-03)
    Smart Dynamic Casting:
    Slipforming with Flexible Formwork
  65. Morel Philippe, Schwartz Thibault (2015-10)
    Automated Casting Systems for Spatial Concrete Lattices
  66. Lloret-Fritschi Ena, Shahab Amir, Linus Mettler, Flatt Robert et al. (2014-03)
    Complex Concrete Structures:
    Merging Existing Casting Techniques with Digital Fabrication
  67. Lloret-Fritschi Ena, Gramazio Fabio, Kohler Matthias, Langenberg Silke (2013-05)
    Complex Concrete Constructions:
    Merging Existing Casting Techniques with Digital Fabrication