Skip to content

#quality

Keywords by Co - Occurrence

  1. Nadais Mariana, Cunha Rui, Pessoa Ana Sofia, Delgado João et al. (2026-01)
    Enhancing Indoor Environmental Quality Through Real-Time Monitoring:
    A Case Study of a 3D-Printed House
  2. Ding Yao, Liu Yifan, Yang Bo, Liu Jiepeng et al. (2026-01)
    Application of Artificial Intelligence Technology in 3D Concrete Printing Quality Inspection and Control:
    A State-of-the-Art Review
  3. Hammoud Ahmad, Mohomad Yosef, Shomar Hasan, Masad Eyad et al. (2025-12)
    Data-Driven Framework for Printability and Geometric Quality Prediction in 3D Concrete Printing
  4. Diggs-McGee Brandy, Samouh Hamza, Garg Nishant (2025-11)
    Predicting Cementitious Set Times via Infrared Thermography:
    Potential Implications on Real-Time Quality Control During 3D Concrete Printing
  5. Zhi Yefan, Akbarzadeh Masoud (2025-10)
    Surface-Toolpath Twins of Shell Components in 3D Concrete Printing for Optimized Buildability and Surface Quality
  6. Barry Mamadou, Jacquet Yohan, Perrot Arnaud (2025-10)
    Pocket Vane and Penetrometer as Quality Control Tool for Extrusion 3D Concrete Printing
  7. Kim Tae, Oh Sangwoo, Lee Jinsuk, Choi Seongcheol et al. (2025-10)
    Experimental Data-Driven Framework for Quality Control of 3D-Printed Concrete Permanent Formworks
  8. Yang Xinrui, Lakhal Othman, Belarouci Abdelkader, Merzouki Rochdi (2025-09)
    From Qualitative Diagnosis to Adaptive Compensation for Filament Imperfections During On-Site Robotic 3D Printing
  9. Flor Juncal Luis, Scott Allan, Clucas Don, Loporcaro Giuseppe (2025-07)
    Ultrasonic Pulse Velocity for Real-Time Filament Quality Monitoring in 3D Concrete Printing Construction
  10. Cui Weijiu, Guo Ruyi, Liu Wenliang, Da Wan et al. (2025-07)
    Quality Assessment of 3D‐Printed Concrete Through Quantitative Visual Inspection
  11. Liu Wenliang, Ji Dongsheng, Cui Weijiu, Shi Xinyu et al. (2025-05)
    Research Progress on Quality Control Method of Concrete 3D Printing Based on Computer Vision
  12. Jiang Yu, Zhang Qingxin, Tabbaa Abir, Daly Ronan (2025-03)
    The Critical Role of Time-Dependent Rheology for Improved Quality Control of 3D Printed Cementitious Structures
  13. Chai Hwa, Shiotani Tomoki (2025-03)
    Opening Letter of RILEM TC QPA:
    Quality and Performance Assurance of Additively Manufactured Cementitious Composites by Advanced Non-Invasive Techniques
  14. Cui Weijiu, Liu Wenliang, Guo Ruyi, Da Wan et al. (2025-02)
    Geometrical Quality Inspection in 3D Concrete Printing Using AI-Assisted Computer Vision
  15. Kumar Soni Ashish, Anil Sangwai Keyur, Panda Biranchi (2025-01)
    In-Process Monitoring and Quality-Assessment of 3D Concrete Printing Process
  16. Ahn Eunjong, Han Seongho, Shin Myoungsu, Khayat Kamal et al. (2025-01)
    Novel Method to Evaluate 3D Printed Concrete Quality Using Ultrasonic Scatter-Energy-Techniques
  17. Ali Mohd, Rub Rashid, Banat Fawzi, Kim Tae-Yeon (2024-11)
    Enhancing the Printing Quality and Mechanical Properties of 3D Printed Cement Composites with Date-Syrup-Based Graphene-Coated-Sand Hybrid
  18. Slepicka Martin, Borrmann André (2024-09)
    Fabrication Information Modeling for Closed-Loop Design and Quality Improvement in Additive Manufacturing for Construction
  19. Straßer Alexander, Haynack Alexander, Kränkel Thomas, Gehlen Christoph (2024-09)
    Additive Manufacturing by the Selective Paste-Intrusion:
    Effect of the Distance of the Print Nozzle to the Particle-Bed on the Print Quality
  20. Barry Mamadou, Jacquet Yohan, Kachkouch Fatima, Perrot Arnaud (2024-09)
    Instrumentation of the Extruder Nozzle Using Load Cells:
    Towards an In-Line Quality-Control Device for 3D Printed Cement-Based Materials
  21. Nakase Kota, Hashimoto Katsufumi, Sugiyama Kentaro, Mori Hiroaki et al. (2024-09)
    Effect of Printing Parameters on Print Quality and Fracture Propagation Behavior of 3D Printed Concrete
  22. Freund Niklas, David Martin, Dröder Klaus, Lowke Dirk (2024-09)
    Vibrated Short Rebar Insertion:
    The Effect of Integration Time on the Resulting Bond Quality
  23. Jiang Yu, Tabbaa Abir, Daly Ronan (2024-09)
    Effects of Time-Dependent Rheological Properties of Cementitious Materials on the Print Quality of Extrusion-Based 3D Printing
  24. Lei Siduo, Kolawole John, Dobrzanski James, Xu Jie et al. (2024-09)
    Enhancing Surface Quality in Additive Manufacturing Applications:
    A Micro-Power Float Approach
  25. Dörrie Robin, David Martin, Freund Niklas, Lowke Dirk et al. (2024-09)
    Surface Processing of Shotcrete 3D Printed Concrete Elements Using a Rotating Trowel Disc:
    Influence of Timing on Resulting Surface Quality
  26. Wolfs Robert, Bos Derk, Caron Jean-François, Gerke Markus et al. (2024-08)
    On-Line and In-Line Quality-Assessment Across All Scale Levels of 3D Concrete Printing
  27. Cui Weijiu, Sun Haijun, Zhou Jiangang, Wang Sheng et al. (2024-07)
    Geometric Quality Evaluation of Three-Dimensional Printable Concrete Using Computational Fluid Dynamics
  28. Duan Jiaqi, Sun Shouzheng, Chi Shengfeng, Hu Chunyou et al. (2024-06)
    Effect of Process Parameters on Forming Quality and Flexural Strength of Continuous-Fiber-Reinforced Cement-Based 3D Printed Composites
  29. Aslani Farhad, Zhang Yifan (2024-06)
    Sustainable 3D Printed Concrete Structures Using High-Quality Secondary Raw Materials
  30. Zaki Ahmed, Carnevale Marco, Giberti Hermes, Schlette Christian (2024-06)
    Monitoring of 3D Concrete Printing Quality Through Multi-View RGB-D Images
  31. Matos Paulo, Prigol Hellen, Schackow Adilson, Silva Nazário Samara et al. (2024-06)
    Quality-Control-Tests of Fresh 3D Printable Cement-Based Materials
  32. Otto Jens, Maiwald Patrick (2024-05)
    Classification and Automated Quality Assurance of 3D Concrete Printed Surfaces
  33. Jhun Jihye, Lee Dong-Hyun, Rehman Atta, Kang Seungwoo et al. (2024-05)
    Development of a Real-Time Geometric Quality Monitoring System for Extruded Filaments of 3D Concrete Printing Construction
  34. Zhao Hongyu, Wang Xiangyu, Sun Junbo, Wang Yufei et al. (2024-04)
    Artificial Intelligence Powered Real-Time Quality Monitoring for Additive Manufacturing in Construction
  35. Ali Mohd, Nassrullah Ghaith, Al-Rub Rashid, Khaswaneh Bashar et al. (2024-03)
    Influence of Carbon-Nano-Tubes on Printing Quality and Mechanical Properties of 3D Printed Cementitious Materials
  36. Chen Yidong, Zhang Yunsheng, Liu Zhiyong, Zhang Wenhua et al. (2024-03)
    Quantitative Surface Quality Evaluation for 3D Printed Concrete with Coarse Aggregate Through 3D Scanning
  37. Zhang Hanghua, Tan Yanke, Hao Lucen, Zheng Shipeng et al. (2024-02)
    Intelligent Real-Time Quality-Control for 3D Printed Concrete with Near-Nozzle Secondary-Mixing
  38. Rehman Atta, Kim Ik-Gyeom, Kim Jung-Hoon (2024-01)
    Towards Full Automation in 3D Concrete Printing Construction:
    Development of an Automated and In-Line Test-Method for In-Situ Assessment of Structural Build-Up and Quality of Concrete
  39. Liu Xiongfei, Cai Huachong, Ma Guowei, Hou Guanyu (2024-01)
    Spray-Based 3D Concrete Printing-Parameter Design-Model:
    Actionable Insight for High Printing Quality
  40. Yang Yan, Wu Hangzi, Han Lifang, Huang Qingling et al. (2023-12)
    Investigation on Geometric and Surface Finish Quality of 3D Concrete Printed Walls with Hollow Section
  41. Bos Derk, Wolfs Robert (2023-12)
    A Quality-Control Framework for Digital Fabrication with Concrete
  42. Li Huanbao, Li Zihan, Skibniewski Mirosław, Wang Liang et al. (2023-11)
    Molding-Quality-Control with Non-Linear Forming-Method in 3D Cement Printing
  43. Rehman Atta, Perrot Arnaud, Birru Bizu, Kim Jung-Hoon (2023-09)
    Recommendations for Quality-Control in Industrial 3D Concrete Printing Construction with Mono-Component Concrete:
    A Critical Evaluation of Ten Test-Methods and the Introduction of the Performance-Index
  44. Villaquirán-Caicedo Mónica, Fernández-González Alejandro, Fernández-García Daniel, Gutiérrez Ruby (2023-07)
    Valorization of a Low-Quality Coal-Ash, in the Preparation of Alkali-Activated Inks for Applications in 3D Additive Manufacturing
  45. Senthilnathan Shanmugaraj, Raphael Benny (2023-07)
    Quality Monitoring of Concrete 3D Printed Elements Using Computer-Vision-Based Texture Extraction Technique
  46. Martin Michael, Banijamali Kasra, Kazemian Ali (2023-06)
    Reality-Capture Technologies for Automated Quality-Control During Construction 3D Printing
  47. Graser Konrad, Walzer Alexander, Hunhevicz Jens, Jähne René et al. (2023-06)
    Qualitative Technology Evaluation of Digital Fabrication with Concrete:
    Conceptual Framework and Scoreboard
  48. Ma Xiaosong, Tan Linzhen, Lu Yuanjing, Yao Wu et al. (2023-03)
    Upcycling of Waste Plasterboard for the Synthesis of High-Quality Gypsum-Based 3D Printing-Powder
  49. Ma Guowei, Hu Tingyu, Wang Fang, Liu Xiongfei et al. (2023-02)
    Magnesium Phosphate Cement for Powder-Based 3D Concrete Printing:
    Systematic Evaluation and Optimization of Printability and Printing Quality
  50. Harbouz Ilhame, Yahia Ammar, Rozière Emmanuel, Loukili Ahmed (2023-02)
    Printing Quality-Control of Cement-Based Materials Under Flow and Rest-Conditions
  51. Yang Jun-Mo, Park In-Beom, Lee Hojae, Kwon Hongkyu (2022-12)
    Effects of Nozzle Details on Print Quality and Hardened Properties of Underwater 3D Printed Concrete
  52. Senthilnathan Shanmugaraj, Raphael Benny (2022-11)
    Using Computer-Vision for Monitoring the Quality of 3D Printed Concrete Structures
  53. Bos Derk, Wolfs Robert (2022-06)
    Automated Visual Inspection of Near-Nozzle Droplet-Formation for Quality-Control of Additive Manufacturing
  54. Hack Norman, Jantzen Carsten, Brohmann Leon, Gerke Markus et al. (2022-06)
    A Closed-Loop Workflow for Quality Inspection and Integrated Post-Processing of 3D Printed Concrete Elements
  55. Roussel Nicolas, Buswell Richard, Ducoulombier Nicolas, Ivanova Irina et al. (2022-06)
    Assessing the Fresh Properties of Printable Cement-Based Materials:
    High-Potential Tests for Quality-Control
  56. Mukhametrakhimov Rustem, Ziganshina Liliya (2022-04)
    Improvement of Technology and Quality-Control of 3DCP
  57. Mechtcherine Viktor, Tittelboom Kim, Kazemian Ali, Kreiger Eric et al. (2022-04)
    A Roadmap for Quality-Control of Hardening and Hardened Printed Concrete
  58. Buswell Richard, Xu Jie, Becker Daniel, Dobrzanski James et al. (2022-04)
    Geometric Quality Assurance for 3D Concrete Printing and Hybrid Construction Manufacturing Using a Standardised Test Part for Benchmarking Capability
  59. Qi Li-gang, Bai Jie, Huang Qing-long, Yang Yan et al. (2022-03)
    Mobile 3D Printing-Techniques for Construction Engineering:
    Outdoor Navigation and Printing Quality-Control
  60. Diggs-McGee Brandy, Kreiger Eric (2021-12)
    Using Isolated Temporal Analysis to Aid in the Assessment of Structural Element Quality for Additive Construction
  61. Zhang Hongping, Wang Jianhong, Liu Yaling, Zhang Xiaoshuang et al. (2021-11)
    Effect of Processing Parameters on the Printing Quality of 3D Printed Composite Cement-Based Materials
  62. Kazemian Ali, Khoshnevis Behrokh (2021-08)
    Real-Time Extrusion-Quality-Monitoring-Techniques for Construction 3D Printing
  63. Lao Wenxin, Li Mingyang, Tjahjowidodo Tegoeh (2020-09)
    Variable-Geometry Nozzle for Surface Quality Enhancement in 3D Concrete Printing
  64. Hack Norman, Kloft Harald (2020-07)
    Shotcrete 3D Printing Technology for the Fabrication of Slender Fully Reinforced Freeform Concrete Elements with High Surface Quality:
    A Real-Scale Demonstrator
  65. Figueiredo Stefan, Overmeir Anne, Nefs Karsten, Schlangen Erik et al. (2020-07)
    Quality-Assessment of Printable Strain-Hardening Cementitious Composites Manufactured in Two Different Printing Facilities
  66. Hameed Rashid, Papon Aurélie, Perrot Arnaud, Rangeard Damien (2020-07)
    Effect of Metallic Fibers on the Print Quality and Strength of 3D Printed Concrete
  67. Assaad Joseph, Hamzeh Farook, Hamad Bilal (2020-05)
    Qualitative Assessment of Interfacial Bonding in 3D Printing Concrete Exposed to Frost-Attack
  68. Lao Wenxin, Li Mingyang, Wong Teck, Tan Ming et al. (2020-02)
    Improving Surface-Finish-Quality in Extrusion-Based 3D Concrete Printing Using Machine-Learning-Based Extrudate-Geometry-Control
  69. Foteinopoulos Panagis, Esnault Vivien, Komineas George, Papacharalampopoulos Alexios et al. (2020-01)
    Cement-Based Additive Manufacturing:
    Experimental Investigation of Process Quality
  70. Wi Kwangwoo, Suresh Vignesh, Wang Kejin, Li Beiwen et al. (2019-12)
    Quantifying Quality of 3D Printed Clay Objects Using a 3D Structured Light Scanning System
  71. Kazemian Ali, Yuan Xiao, Davtalab Omid, Khoshnevis Behrokh (2019-01)
    Computer-Vision for Real-Time Extrusion-Quality-Monitoring and Control in Robotic Construction
  72. Ashrafi Negar, Duarte José, Nazarian Shadi, Meisel Nicholas (2018-10)
    Evaluating the Relationship Between Deposition and Layer-Quality in Large-Scale Additive Manufacturing of Concrete