Effect of Shaping Plate Apparatus on Mechanical Properties of 3D Printed Cement-Based Materials (2022-03)¶
Experimental and Numerical Studies
10.1016/j.cemconres.2022.106785
, Teng Huaijin, Liao Hengcheng, Jiang Yaqing, Qian Chunxiang,
Journal Article - Cement and Concrete Research, Vol. 155
Abstract
Precisely controlling the shape of the printed-layers, eliminating the curved sides and internal stress concentration, and increasing the mechanical properties are essential to guarantee the quality of 3D printed cement-based structures. This work aims at achieving the above-mentioned targets through a specially designed shaping plate apparatus. The pressure (stress) distribution in the printed structure with a shaping plate apparatus (SP-3DPC), and the cross-sectional shape, microstructure and mechanical properties of SP-3DPC were systematically investigated. Results indicate that using the shaping plate apparatus may slightly reduce the printing speed, but it can effectively constrain the free expansion of extrudate, control its cross-sectional geometry, and improve the surface finish quality and mechanical properties of the printed structure. This study provides a theoretical basis and technical guidance for the design and application of the shaping plate apparatus.
¶
52 References
- Alhumayani Hashem, Gomaa Mohamed, Soebarto Veronica, Jabi Wassim (2020-06)
Environmental Assessment of Large-Scale 3D Printing in Construction:
A Comparative Study between Cob and Concrete - Anton Ana-Maria, Reiter Lex, Wangler Timothy, Frangez Valens et al. (2020-12)
A 3D Concrete Printing Prefabrication Platform for Bespoke Columns - Bester Frederick, Heever Marchant, Kruger Jacques, Zijl Gideon (2020-11)
Reinforcing Digitally Fabricated Concrete:
A Systems Approach Review - Bos Freek, Wolfs Robert, Ahmed Zeeshan, Salet Theo (2016-08)
Additive Manufacturing of Concrete in Construction:
Potentials and Challenges of 3D Concrete Printing - Buswell Richard, Silva Wilson, Jones Scott, Dirrenberger Justin (2018-06)
3D Printing Using Concrete-Extrusion:
A Roadmap for Research - Carneau Paul, Mesnil Romain, Baverel Olivier, Roussel Nicolas (2022-03)
Layer Pressing in Concrete Extrusion-Based 3D Printing:
Experiments and Analysis - Comminal Raphaël, Silva Wilson, Andersen Thomas, Stang Henrik et al. (2020-10)
Modelling of 3D Concrete Printing Based on Computational Fluid Dynamics - Gosselin Clément, Duballet Romain, Roux Philippe, Gaudillière-Jami Nadja et al. (2016-03)
Large-Scale 3D Printing of Ultra-High-Performance Concrete:
A New Processing Route for Architects and Builders - He Lewei, Chow Wai, Li Hua (2020-06)
Effects of Inter-Layer Notch and Shear Stress on Inter-Layer Strength of 3D Printed Cement-Paste - Heras Murica Daniel, Genedy Moneeb, Taha Mahmoud (2020-09)
Examining the Significance of Infill-Printing-Pattern on the Anisotropy of 3D Printed Concrete - Joh Changbin, Lee Jungwoo, Bui The, Park Jihun et al. (2020-11)
Buildability and Mechanical Properties of 3D Printed Concrete - Khoshnevis Behrokh, Dutton Rosanne (1998-01)
Innovative Rapid Prototyping Process Makes Large-Sized, Smooth-Surfaced Complex Shapes in a Wide Variety of Materials - Khoshnevis Behrokh, Hwang Dooil, Yao Ke, Yeh Zhenghao (2006-05)
Mega-Scale Fabrication by Contour Crafting - Kruger Jacques, Plessis Anton, Zijl Gideon (2020-12)
An Investigation into the Porosity of Extrusion-Based 3D Printed Concrete - Kruger Jacques, Zijl Gideon (2020-10)
A Compendious Review on Lack-of-Fusion in Digital Concrete Fabrication - Labonnote Nathalie, Rønnquist Anders, Manum Bendik, Rüther Petra (2016-09)
Additive Construction:
State of the Art, Challenges and Opportunities - Lao Wenxin, Li Mingyang, Tjahjowidodo Tegoeh (2020-09)
Variable-Geometry Nozzle for Surface Quality Enhancement in 3D Concrete Printing - Lao Wenxin, Li Mingyang, Wong Teck, Tan Ming et al. (2020-02)
Improving Surface-Finish-Quality in Extrusion-Based 3D Concrete Printing Using Machine-Learning-Based Extrudate-Geometry-Control - Lao Wenxin, Tay Yi, Quirin Didier, Tan Ming (2018-05)
The Effect of Nozzle Shapes on the Compactness and Strength of Structure Printed in Additive Manufacturing of Concrete - Lim Sungwoo, Buswell Richard, Valentine Philip, Piker Daniel et al. (2016-06)
Modelling Curved-Layered Printing Paths for Fabricating Large-Scale Construction Components - Liu Zhixin, Li Mingyang, Tay Yi, Weng Yiwei et al. (2020-04)
Rotation-Nozzle and Numerical Simulation of Mass-Distribution at Corners in 3D Cementitious Material-Printing - Lloret-Fritschi Ena, Shahab Amir, Linus Mettler, Flatt Robert et al. (2014-03)
Complex Concrete Structures:
Merging Existing Casting Techniques with Digital Fabrication - Lowke Dirk, Dini Enrico, Perrot Arnaud, Weger Daniel et al. (2018-07)
Particle-Bed 3D Printing in Concrete Construction:
Possibilities and Challenges - Lowke Dirk, Talke Daniel, Mai (née Dressler) Inka, Weger Daniel et al. (2020-05)
Particle-Bed 3D Printing by Selective Cement-Activation:
Applications, Material and Process Technology - Manikandan Karthick, Jiang Xuepeng, Singh Amit, Li Beiwen et al. (2020-06)
Effects of Nozzle Geometries on 3D Printing of Clay Constructs:
Quantifying Contour-Deviation and Mechanical Properties - Marchment Taylor, Sanjayan Jay, Xia Ming (2019-03)
Method of Enhancing Inter-Layer Bond Strength in Construction-Scale 3D Printing with Mortar by Effective Bond Area Amplification - McGee Wesley, Ng Tsz, Yu Kequan, Li Victor (2020-07)
Extrusion Nozzle Shaping for Improved 3DP of Engineered Cementitious Composites (ECC-SHCC) - Mechtcherine Viktor, Bos Freek, Perrot Arnaud, Silva Wilson et al. (2020-03)
Extrusion-Based Additive Manufacturing with Cement-Based Materials:
Production Steps, Processes, and Their Underlying Physics - Mechtcherine Viktor, Nerella Venkatesh, Will Frank, Näther Mathias et al. (2019-08)
Large-Scale Digital Concrete Construction:
CONPrint3D Concept for On-Site, Monolithic 3D Printing - Nerella Venkatesh, Krause Martin, Mechtcherine Viktor (2019-11)
Direct Printing-Test for Buildability of 3D Printable Concrete Considering Economic Viability - Ooms Ticho, Vantyghem Gieljan, Coile Ruben, Corte Wouter (2020-12)
A Parametric Modelling-Strategy for the Numerical Simulation of 3D Concrete Printing with Complex Geometries - Pan Tinghong, Jiang Yaqing, He Hui, Wang Yu et al. (2021-01)
Effect of Structural Build-Up on Inter-Layer Bond Strength of 3D Printed Cement Mortars - Panda Biranchi, Mohamed Nisar, Paul Suvash, Bhagath Singh Gangapatnam et al. (2019-07)
The Effect of Material Fresh Properties and Process Parameters on Buildability and Inter-Layer Adhesion of 3D Printed Concrete - Panda Biranchi, Paul Suvash, Mohamed Nisar, Tay Yi et al. (2017-09)
Measurement of Tensile Bond Strength of 3D Printed Geopolymer Mortar - Panda Biranchi, Paul Suvash, Tan Ming (2017-07)
Anisotropic Mechanical Performance of 3D Printed Fiber-Reinforced Sustainable Construction-Material - Paul Suvash, Tay Yi, Panda Biranchi, Tan Ming (2017-08)
Fresh and Hardened Properties of 3D Printable Cementitious Materials for Building and Construction - Paul Suvash, Zijl Gideon, Tan Ming, Gibson Ian (2018-05)
A Review of 3D Concrete Printing Systems and Materials Properties:
Current Status and Future Research Prospects - Perrot Arnaud, Rangeard Damien (2019-04)
3D Printing in Concrete:
Techniques for Extrusion-Casting - Rahul Attupurathu, Santhanam Manu, Meena Hitesh, Ghani Zimam (2018-12)
3D Printable Concrete:
Mixture-Design and Test-Methods - Roussel Nicolas (2018-05)
Rheological Requirements for Printable Concretes - Roussel Nicolas, Spangenberg Jon, Wallevik Jon, Wolfs Robert (2020-06)
Numerical Simulations of Concrete Processing:
From Standard Formative Casting to Additive Manufacturing - Shakor Pshtiwan, Nejadi Shami, Paul Gavin (2019-05)
A Study into the Effect of Different Nozzles Shapes and Fiber-Reinforcement in 3D Printed Mortar - Souza Marcelo, Ferreira Igor, Moraes Elisângela, Senff Luciano et al. (2020-09)
3D Printed Concrete for Large-Scale Buildings:
An Overview of Rheology, Printing Parameters, Chemical Admixtures, Reinforcements, and Economic and Environmental Prospects - Tay Yi, Li Mingyang, Tan Ming (2019-04)
Effect of Printing Parameters in 3D Concrete Printing:
Printing Region and Support Structures - Tay Yi, Panda Biranchi, Paul Suvash, Mohamed Nisar et al. (2017-05)
3D Printing Trends in Building and Construction Industry:
A Review - Wolfs Robert, Bos Freek, Salet Theo (2019-03)
Hardened Properties of 3D Printed Concrete:
The Influence of Process Parameters on Inter-Layer Adhesion - Wolfs Robert, Salet Theo, Roussel Nicolas (2021-10)
Filament-Geometry-Control in Extrusion-Based Additive Manufacturing of Concrete:
The Good, the Bad and the Ugly - Yu Shiwei, Du Hongjian, Sanjayan Jay (2020-07)
Aggregate-Bed 3D Concrete Printing with Cement-Paste Binder - Yuan Philip, Zhan Qiang, Wu Hao, Beh Hooi et al. (2021-11)
Real-Time Tool-Path-Planning and Extrusion-Control-Method for Variable-Width 3D Concrete Printing - Zareiyan Babak, Khoshnevis Behrokh (2017-08)
Effects of Interlocking on Inter-Layer Adhesion and Strength of Structures in 3D Printing of Concrete - Zareiyan Babak, Khoshnevis Behrokh (2017-06)
Inter-Layer Adhesion and Strength of Structures in Contour Crafting:
Effects of Aggregate-Size, Extrusion-Rate, and Layer-Thickness - Zhang Yu, Zhang Yunsheng, She Wei, Yang Lin et al. (2019-01)
Rheological and Hardened Properties of the High-Thixotropy 3D Printing Concrete
12 Citations
- Li Nan, Deng Yongjie, Li Weihong, Li Lingyu et al. (2025-08)
Performance of Active-Magnesia-Based Magnesium Phosphate Cement and Application of Rapid-Solidification 3D Printing Technology - Yang Rijiao, Xu Chengji, Fang Sen, Li Xinze et al. (2025-07)
Mechanistic Insights into Microstructural Changes Caused by Stapling in Extrusion-Based 3D Printed Concrete (3DPC) - Zhang Ziqi, Pan Tinghong, Guoa Rongxin, Lin Runsheng et al. (2025-04)
Simulation and Analysis of Material Stacking and Migration Induced by Extrusion Behavior in 3D Printed Concrete - Zhang Kaijian, Lin Wenqiang, Zhang Qingtian, Wang Dehui et al. (2024-07)
Evaluation of Anisotropy and Statistical Parameters of Compressive Strength for 3D Printed Concrete - Cui Weijiu, Sun Haijun, Zhou Jiangang, Wang Sheng et al. (2024-07)
Geometric Quality Evaluation of Three-Dimensional Printable Concrete Using Computational Fluid Dynamics - Wei Ying, Han Song, Chen Ziwei, Lu Jianxian et al. (2024-04)
Numerical Simulation of 3D Concrete Printing Derived from Printer Head and Printing Process - Reinold Janis, Daadouch Koussay, Meschke Günther (2023-11)
Numerical Simulation of Three Dimensional Concrete Printing Based on a Unified Fluid and Solid Mechanics Formulation - Pan Tinghong, Guo Rongxin, Fu Chaoshu, Ji Xuping et al. (2023-10)
Extrusion-Based 3D Concrete Printing with Different Flow-Direction - Vespalec Arnošt, Podroužek Jan, Koutný Daniel (2023-04)
DoE Approach to Setting Input Parameters for Digital 3D Printing of Concrete for Coarse Aggregates up to 8 mm - Ahmed Ghafur (2023-01)
A Review of 3D Concrete Printing:
Materials and Process Characterization, Economic Considerations and Environmental Sustainability - Pan Tinghong, Guo Rongxin, Jiang Yaqing, Ji Xuping et al. (2022-11)
Flow and Deformation Behaviors of Cementitious Materials Through Nozzles with Different Geometric Parameters:
Experimental and Numerical Approaches - Pan Tinghong, Guo Rongxin, Jiang Yaqing, Ji Xuping (2022-07)
How Do the Contact Surface Forces Affect the Inter-Layer Bond Strength of 3D Printed Mortar?
BibTeX
@article{pan_teng_liao_jian.2022.EoSPAoMPo3PCBM,
author = "Tinghong Pan and Huaijin Teng and Hengcheng Liao and Yaqing Jiang and Chunxiang Qian and Yu Wang",
title = "Effect of Shaping Plate Apparatus on Mechanical Properties of 3D Printed Cement-Based Materials: Experimental and Numerical Studies",
doi = "10.1016/j.cemconres.2022.106785",
year = "2022",
journal = "Cement and Concrete Research",
volume = "155",
}
Formatted Citation
T. Pan, H. Teng, H. Liao, Y. Jiang, C. Qian and Y. Wang, “Effect of Shaping Plate Apparatus on Mechanical Properties of 3D Printed Cement-Based Materials: Experimental and Numerical Studies”, Cement and Concrete Research, vol. 155, 2022, doi: 10.1016/j.cemconres.2022.106785.
Pan, Tinghong, Huaijin Teng, Hengcheng Liao, Yaqing Jiang, Chunxiang Qian, and Yu Wang. “Effect of Shaping Plate Apparatus on Mechanical Properties of 3D Printed Cement-Based Materials: Experimental and Numerical Studies”. Cement and Concrete Research 155 (2022). https://doi.org/10.1016/j.cemconres.2022.106785.