Skip to content

#mixture

Keywords by Co - Occurrence

  1. Federowicz Karol, Sibera Daniel, Tošić Nikola, Zieliński Adam et al. (2026-01)
    Early-Age Shrinkage Monitoring of 3D-Printed Cementitious Mixtures: Comparison of Measuring Techniques and Low-Cost Alternatives
  2. Costa Gabriel, Maas Pyetra, Doerner Gabriel, Nazário Samara et al. (2026-01)
    Reducing the Cement Content in 3D Concrete Printing Mixtures Through Porcelain Polishing Residue Incorporation
  3. Tinoco Matheus, Lima Moura Paiva Rayane, Andrade Luiza, Mendoza Reales Oscar (2025-12)
    Hybrid 3D Printable Mixtures Incorporating Fine Earth, Portland Cement, and Fly Ash:
    A Sustainable Alternative to Cement-Intensive Systems
  4. Sičáková Alena, Verčimák Dominik (2025-11)
    Lightweight Mixtures with a High Proportion of Recycled Fillers in Terms of 3D Printing Parameters
  5. Baah Thomas, Kim Heejeong, Latypov Marat (2025-11)
    Multi-Objective Adaptive Experimental Approach for Optimizing 3D Concrete Printing Mixtures and Parameters Incorporating Construction and Demolition Waste for Sustainable Construction
  6. Akgümüş Fatih, Şahin Hatice, Mardani Ali (2025-10)
    Investigation of Waste Steel Fiber Usage Rate and Length Change on Some Fresh State Properties of 3D Printable Concrete Mixtures
  7. Rabul H., Prem Prabhat, Ravichandran Darssni, Rathan RT Arjun (2025-09)
    Development of Fly Ash and Limestone Calcined Clay-Based Mixtures for Concrete 3D Printing
  8. Maroszek Marcin, Rudziewicz Magdalena, Rusin-Żurek Karina, Hager Izabela et al. (2025-09)
    Recycled Materials and Lightweight Insulating Additions to Mixtures for 3D Concrete Printing
  9. Matos Ana, Emiroğlu Mehmet, Milheiro-Oliveira Paula (2025-09)
    Predicting Stabilized Soil Mixture Proportions for 3D Printing:
    Preliminary Study Using the Design of Experiments Approach
  10. Sabouni Reem, Martini Samer (2025-09)
    Characterization of 3D Printed Concrete Mixtures Developed Using Local UAE Materials Based on Rheological Properties
  11. Keller Petr, Mendřický Radomír (2025-09)
    Analysis of Object Deformations Printed by Additive Manufacturing from Concrete Mixtures over Time
  12. Medeiros Fernanda, Anjos Marcos, Maia José, Dias Leonardo et al. (2025-08)
    Effect of Sisal Fibers on the Behavior of 3D-Printed Cementitious Mixtures Exposed to High Temperatures
  13. Oulkhir Fatima, Akhrif Iatimad, Jai Mostapha, Rihani Nadir (2025-07)
    Clay and Alginate-Based Mixtures 3D Printing:
    A Numerical Procedure for Shape Stability and Buildability Assessment
  14. Kellnerová Vendula, David Tomáš, Reiterman Pavel (2025-07)
    Modification of Properties of Fresh Mixture for 3D Printing Using Cement-Based Mortar
  15. Senf Ferdinand, Javed Rezan, Funke Henrik, Gelbrich Sandra (2025-06)
    Enhanced Environmental Sustainability of 3D-Printed Concrete Mixtures Based on Calcium Sulfoaluminate (CSA) and Blast Furnace Cement (CEM III/B)
  16. Campos Guilherme, Lunelli Pietro, Moraes Elisângela, Souza Marcelo et al. (2025-04)
    Optimization of Clay-Based Ceramic Mixtures with Sugarcane Bagasse Fiber for 3D Printing
  17. Calmanovici Miran, Livne Achiya, Barath Shany (2025-03)
    From Waste to Resource:
    A Design to Fabrication Approach Integrating Recycled Wood-Mycelium Mixtures for 3D Printing in Architecture
  18. Rajendran Naveenkumar, Runge Troy, Bergman Richard, Nepal Prakash et al. (2025-03)
    Economic and Environmental Impact Analysis of Cellulose Nanocrystal-Reinforced Cementitious Mixture in 3D Printing
  19. Şahin Hatice, Kaya Yahya, Akgümüş Fatih, Mardani Naz et al. (2025-03)
    Degradation of Mechanical Properties of 3D Fiber Reinforced Printed Concrete Mixtures Exposed to Elevated Temperatures
  20. Srinivas Dodda, Panda Biranchi, Suraneni Prannoy, Sitharam Thallak (2025-01)
    Influence of Mixture-Composition and Carbonation-Curing on Properties of Sustainable 3D Printable Mortars
  21. Pepe Marco, Lombardi Rosario, Lima Carmine, Paolillo Bruno et al. (2025-01)
    Experimental Evidence on the Possible Use of Fine Concrete and Brick Recycled Aggregates for 3D Printed Cement-Based Mixtures
  22. Li Chao, Petzold Frank (2025-01)
    Ontology-Driven Mixture-of-Domain Documentation:
    A Backbone Approach Enabling Question Answering for Additive Construction
  23. Schossler Rodrigo, Ullah Shafi, Alajlan Zaid, Yu Xiong (2025-01)
    Data-Driven Analysis in 3D Concrete Printing:
    Predicting and Optimizing Construction Mixtures
  24. Vargas Armando, Robayo-Salazar Rafael, Gutiérrez Ruby (2024-12)
    Effects of Incorporating Fine Aggregates and Polypropylene-Micro-Fibers on the Cracking-Control of 3D Printed Cementitious Mixtures
  25. Gurunandan M., Mala Hiranya, Nanthagopalan Prakash (2024-12)
    Effect of Water-to-Binder, Aggregate-to-Binder-Ratio and Admixtures on Printability and Mechanical Properties of 3D Printable Mortar Mixtures
  26. Sadeghzadeh Benam Shaghayegh, Sandalci Ilgin, Kara Burhan, Bebek Özkan et al. (2024-11)
    Improving the 3D Printability of High-Volume Fly-Ash Mixtures Through Addition of Mineral Admixtures
  27. Hoang Pham, Moon Hyosoo, Ahn Yonghan (2024-10)
    Optimizing 3D Printed Concrete Mixtures for Extraterrestrial Habitats:
    A Machine Learning Framework
  28. Over Derya, Ozbakan Nesil, Bustani Mehmet, Karali Bulut (2024-10)
    An Investigation of Rheological Properties and Sustainability of Various 3D Printing Concrete Mixtures with Alternative Binders and Rheological Modifiers
  29. Colyn Markus, Babafemi Adewumi, Zijl Gideon (2024-09)
    Advancements in Sustainability of 3D Concrete Printing:
    Presenting Low-Carbon Mixtures for Additively Manufactured Concrete Structures in Practice
  30. Hierden Naomi, Yu Q., Brouwers Henricus (2024-09)
    Mechano-Chemically Activated Local Clays as Sustainable Binder Replacement for 3D Concrete Mixtures
  31. Mohan Manu, Tao Yaxin, Schutter Geert, Tittelboom Kim (2024-09)
    Influence of Temperature Variations on the Performance of Two-Component 3D Printable Mixtures
  32. Barbosa Marcella, Anjos Marcos, Maia José, Camões Aires et al. (2024-09)
    Effect of Expanded Perlite on the Properties of 3DCP Mixtures
  33. Joon Hillar, Peetrimägi Lauri (2024-09)
    Influence of Illitic Calcined Clay on Properties of Mixtures for 3D Concrete Printing
  34. Ahmad Lina, Jabi Wassim, Sosa Marco (2024-08)
    Non-Planar Robotic Printing of Earth-Based Material:
    A Case Study Using Cob-Like Mixture
  35. Abudawaba Fareh, Gomaa Eslam, Gheni Ahmed, Gawady Mohamed (2024-08)
    Exploration of the Open-Time and Compressive Strength of Alkali-Activated Mixtures for 3D Printed Concrete
  36. Rudziewicz Magdalena, Maroszek Marcin, Setlak (nee Pławecka) Kinga, Góra Mateusz et al. (2024-08)
    Optimization of Foams-Polypropylene Fiber-Reinforced Concrete Mixtures Dedicated for 3D Printing
  37. Sucharda Oldřich, Gandel Radoslav, Cmiel Petr, Jeřábek Jan et al. (2024-07)
    Utilization of High-Performance Concrete Mixtures for Advanced Manufacturing Technologies
  38. Srinivas Dodda, Ventrapragada Durga, Panda Biranchi, Sitharam Thallak (2024-07)
    A Study on the Effect of Mixture Constituents on Washout-Resistance, Mechanical, and Transport Properties in the Context of Underwater 3D Concrete Printing
  39. Kamakshi Tippabhotla, Thakur Manideep, Subramaniam Kolluru (2024-07)
    Formulating Printable Concrete Mixtures Based on Paste-Rheology and Aggregate-Content:
    Application to Alkali-Activated Binders
  40. Rehman Atta, Basha Shaik, Choi Kichang, Kang Manmin et al. (2024-07)
    An Analysis of Penetrometer-Test Methods for Structural Build-Up in Stiff and Accelerated 3D Concrete Printing Mixtures
  41. Markovic Ivan, Horat Alexandra, Pantellini Danilo (2024-07)
    Optimization of Earth-Based Mixtures in Terms of 3D Printability and Mechanical Properties:
    Feasibility Study
  42. Ndarowa Tariro, Mahachi Jeffrey, Ikotun Bolane (2024-06)
    A Review of Optimization of Limestone and Calcined-Clay-Cement Concrete Mixtures for 3D Printing
  43. Konoplianyk Alexander, Sopilnyak Artem, Sirenok Kyrylo, Sereda Svitlana et al. (2024-06)
    Constituent Components of 3D Printing in Construction:
    Mixture, Reinforcement and Their Main Characteristics
  44. Zhong Kuangnan, Huang Shuai, Liu Zhichao, Wang Fazhou et al. (2024-06)
    CO2-Absorbing 3D Printable Mixtures for Magnesium-Slag Valorization
  45. Li Haodao, Wei Jingjie, Khayat Kamal (2024-06)
    3D Printing of Fiber-Reinforced Calcined Clay-Limestone-Based Cementitious Materials:
    From Mixture Design to Printability Evaluation
  46. Birru Bizu, Rehman Atta, Kim Jung-Hoon (2024-06)
    Comparative Analysis of Structural Build-Up in One-Component Stiff and Two-Component Shotcrete-Accelerated Set-on-Demand Mixtures for 3D Concrete Printing
  47. An Dong, Zhang Yixia, Yang Chunhui (2024-05)
    Incorporating Coarse Aggregates into 3D Concrete Printing from Mixture Design and Process-Control to Structural Behavior and Practical Applications:
    A Review
  48. Stout Ivy, Godfrey Grant, Dayley Jenna, Rodriguez Dexter et al. (2024-05)
    Concrete Mixture Properties and Designs for Additive Manufacturing:
    A Review of 3D Concrete Printing
  49. Silveira Júnior Jairon, Moura Cerqueira Kevin, Moura Ruan, Matos Paulo et al. (2024-04)
    Influence of Time-Gap on the Buildability of Cement Mixtures Designed for 3D Printing
  50. Dvorkin Leonid, Marchuk Vitaliy, Mróz Katarzyna, Maroszek Marcin et al. (2024-04)
    Energy-Efficient Mixtures Suitable for 3D Technologies
  51. Shahid Mursaleen, Sglavo Vincenzo (2024-03)
    Binder-Jetting 3D Printing of Binary Cement-Siliceous Sand Mixture
  52. Colyn Markus, Zijl Gideon, Babafemi Adewumi (2024-02)
    Fresh and Strength Properties of 3D Printable Concrete Mixtures Utilising a High Volume of Sustainable Alternative Binders
  53. Šána Vladimír, Litoš Jiří, Kolář Karel (2023-10)
    Mechanical Properties of the New Cement Composite Mixture Appropriate for Robotic Processing
  54. Miranda Luiza, Jovanović Balša, Lesage Karel, Schutter Geert (2023-10)
    Geometric Conformability of 3D Concrete Printing Mixtures from a Rheological Perspective
  55. Skripkiūnas Gintautas, Girskas Giedrius, Rishko Lyudmyla (2023-10)
    Lightweight Portland Cement Mixtures with Perlite for 3D Printing of Concrete Structures
  56. Şahin Hatice, Mardani Ali (2023-10)
    How Does Rheological Behavior Affect the Inter-Layer Bonding Strength of 3DPC Mixtures?
  57. Sedghi Reza, Zafar Muhammad, Hojati Maryam (2023-10)
    Exploring Fresh and Hardened Properties of Sustainable 3D Printed Lightweight Cementitious Mixtures
  58. Nunes Gabrielly, Anjos Marcos, Lins Ana, Negreiros Ana et al. (2023-08)
    Evaluation of the Mechanical Behavior of Representative Volumetric Elements of 3DCP Masonry-Mixtures with Partial Replacement of Cement by Limestone-Filler and Metakaolin
  59. Lu Bing, Li Hongliang, Wong Teck, Qian Shunzhi (2023-08)
    Development of a Functional Cementitious Mixture with Expanded Graphite for Automated Spray Construction
  60. Litoš Jiří, Šána Vladimír, Uhlík Adam, Kolář Karel et al. (2023-07)
    Mechanical and Physical Properties of Cement Mixtures for 3D Processing
  61. Daher Jana, Kleib Joelle, Benzerzour Mahfoud, Abriak Nor-Edine et al. (2023-06)
    The Development of Soil-Based 3D Printable Mixtures:
    A Mix-Design Methodology and a Case Study
  62. Shenawa Amaal, Karoti Poonam (2023-06)
    3D Printing in Construction, Mixture Characteristics, Strength, and Thermal Performance-Review
  63. Tao Yaxin, Dai Xiaodi, Schutter Geert, Tittelboom Kim (2023-06)
    Set-on-Demand of Alkali-Activated Slag Mixture Using Twin-Pipe Pumping
  64. Kumar Devalla Tharun, Srinivas Dodda, Panda Biranchi, Sitharam Thallak (2023-04)
    Investigation on the Flexural and Tensile Performance of 3D Printable Cementitious Mixtures Considering the Effect of Fiber-Distribution
  65. Ramezani Amir, Modaresi Shahriar, Dashti Pooria, Givkashi Mohammad et al. (2023-04)
    Effects of Different Types of Fibers on Fresh and Hardened Properties of Cement and Geopolymer-Based 3D Printed Mixtures:
    A Review
  66. Ravichandran Darssni, Giridhar Greeshma, Ramamurthy Vignesh, Prem Prabhat (2023-03)
    Influence of Test-Protocol on Determining the Rheological Properties of Cement-Pastes-Mixtures for Concrete 3D Printing
  67. Dai Xiaodi, Tao Yaxin, Tittelboom Kim, Schutter Geert (2023-02)
    Rheological and Mechanical Properties of 3D Printable Alkali-Activated Slag Mixtures with Addition of Nano Clay
  68. Şahin Hatice, Mardani Ali (2023-02)
    Mechanical Properties, Durability Performance and Inter-Layer Adhesion of 3DPC Mixtures:
    A State‐of‐the‐art Review
  69. Mendřický Radomír, Keller Petr (2023-01)
    Analysis of Object-Deformations Printed by Extrusion of Concrete-Mixtures Using 3D-Scanning
  70. Joon Hillar, Hass Lauri, Peetrimägi Lauri (2023-01)
    Influence of Limestone-Filler on Technological Parameters of Mixtures for 3D Concrete Printing
  71. Kondepudi Kala, Subramaniam Kolluru, Nematollahi Behzad, Bong Shin et al. (2022-11)
    Study of Particle-Packing and Paste-Rheology in Alkali-Activated Mixtures to Meet the Rheology Demands of 3D Concrete Printing:
    Correction
  72. Straßer Alexander, Matthäus Carla, Weger Daniel, Kränkel Thomas et al. (2022-06)
    Selective Paste-Intrusion:
    Stability of Cement-Paste Mixtures Towards Changing Ambient Temperature
  73. Kondepudi Kala, Subramaniam Kolluru, Nematollahi Behzad, Bong Shin et al. (2022-05)
    Study of Particle-Packing and Paste-Rheology in Alkali-Activated Mixtures to Meet the Rheology Demands of 3D Concrete Printing
  74. Břoušek Josef, Petr Tomas, Beran Leoš, Myslivec Tomáš et al. (2022-03)
    Robotic Arm-Design, Development and Control for Printing Cement-Mixtures
  75. Mohan Manu, Rahul Attupurathu, Dam Benjamin, Zeidan Talina et al. (2022-02)
    Performance Criteria, Environmental Impact and Cost-Assessment for 3D Printable Concrete Mixtures
  76. Alqenaee Amnah, Memari Ali (2022-02)
    Experimental Study of 3D Printable Cob Mixtures
  77. Hojati Maryam, Li Zhanzhao, Memari Ali, Park Keunhyoung et al. (2022-01)
    3D Printable Quaternary-Cementitious-Materials Towards Sustainable Development:
    Mixture Design and Mechanical Properties
  78. Şahin Hatice, Mardani Ali (2021-12)
    Assessment of Materials, Design Parameters and Some Properties of 3D Printing Concrete Mixtures:
    A State of the Art Review
  79. Antoni Antoni, Agraputra A., Teopilus D., Sunaryo A. et al. (2021-11)
    Investigation of the Material-Mixtures and Fiber-Addition for 3D Concrete Printing
  80. Abudawaba Fareh, Gomaa Eslam, Gheni Ahmed, Gawady Mohamed (2021-09)
    Developing Mix Proportions for Class C Fly-Ash-Based Alkali-Activated 3D Printed Concrete Mixtures
  81. Som Debadri, Zanotti Cristina (2021-09)
    Effect of Nano-Additives and Polymeric Viscosity-Modifying-Admixtures (VMA) on the Fresh and Hardened Properties of 3D Printable Concrete Mixtures
  82. Lim Taeheun, Kim Seonghoon, Jo Kanghee, Jo Ilguk et al. (2021-07)
    Early Hydration and Mechanical Strength of Calcite-Ettringite-Seeds-Added Cement-Mixture for 3D Printing
  83. Vojir Martin, Myslivec Tomáš, Petr Tomas, Břoušek Josef et al. (2021-03)
    A New Way to Design Software for Industrial Automation:
    3D Printer Cement Mixtures
  84. Klyuev Sergey, Klyuev Alexander, Shorstova Elena (2021-02)
    Technology of 3D Printing of Fiber-Reinforced Mixtures
  85. Vespalec Arnošt, Novák Josef, Kohoutková Alena, Vosynek Petr et al. (2020-11)
    Interface Behavior and Interface Tensile Strength of a Hardened Concrete Mixture with a Coarse Aggregate for Additive Manufacturing
  86. Moeini Mohammad, Hosseinpoor Masoud, Yahia Ammar (2020-07)
    Use of the Chemical and Mineral Admixtures to Tailor the Rheology and the Green Strength of 3D Printing Cementitious Mixtures
  87. Manikandan Karthick, Wi Kwangwoo, Zhang Xiao, Wang Kejin et al. (2020-03)
    Characterizing Cement Mixtures for Concrete 3D Printing
  88. Kim Kwan, Yeon Jaeheum, Lee Hee, Yeon Jung (2019-08)
    Dimensional Stability of SBR-Modified Cementitious Mixtures for Use in 3D Additive Construction
  89. Kim Kwan, Yeon Jaeheum, Lee Hee, Yeon Kyu-Seok (2019-08)
    Feasibility Study of SBR-Modified Cementitious Mixtures for Use as 3D Additive Construction Materials
  90. Kim Kwan, Yeon Jaeheum, Lee Hee (2019-08)
    Strength Development Characteristics of SBR-Modified Cementitious Mixtures for 3D Concrete Printing
  91. Yeon Kyu-Seok, Kim Kwan, Yeon Jaeheum, Lee Hee (2019-07)
    Fresh Properties of EVA-Modified Cementitious Mixtures for Use in Additive Construction by Extrusion
  92. Rushing Todd, Stynoski Peter, Barna Lynette, Chaar Ghassan et al. (2019-02)
    Investigation of Concrete Mixtures for Additive Construction
  93. Rahul Attupurathu, Santhanam Manu, Meena Hitesh, Ghani Zimam (2018-12)
    3D Printable Concrete:
    Mixture-Design and Test-Methods
  94. Liu Zhixin, Li Mingyang, Weng Yiwei, Wong Teck et al. (2018-12)
    Mixture-Design-Approach to Optimize the Rheological Properties of the Material Used in 3D Cementitious Material-Printing
  95. Panda Biranchi, Tan Ming (2018-11)
    Rheological Behavior of High-Volume Fly-Ash Mixtures Containing Micro-Silica for Digital Construction Application
  96. Panda Biranchi, Ruan Shaoqin, Unluer Cise, Tan Ming (2018-11)
    Improving the 3D Printability of High-Volume Fly-Ash Mixtures via the Use of Nano-Attapulgite-Clay
  97. Panda Biranchi, Unluer Cise, Tan Ming (2018-10)
    Investigation of the Rheology and Strength of Geopolymer Mixtures for Extrusion-Based 3D Printing
  98. Kazemian Ali, Yuan Xiao, Meier Ryan, Khoshnevis Behrokh (2018-09)
    A Framework for Performance-Based Testing of Fresh Mixtures for Construction-Scale 3D Printing
  99. Zareiyan Babak, Khoshnevis Behrokh (2018-05)
    Effects of Mixture Ingredients on Extrudability of Concrete in Contour Crafting
  100. Zareiyan Babak, Khoshnevis Behrokh (2018-04)
    _Effects of Mixture Ingredients on Inter-Layer Adhesion of Concrete in Contour Crafting
  101. Kashani Alireza, Ngo Tuan (2017-07)
    Optimization of Mixture-Properties for 3D Printing of Geopolymer Concrete
  102. Kazemian Ali, Yuan Xiao, Cochran Evan, Khoshnevis Behrokh (2017-04)
    Cementitious Materials for Construction-Scale 3D Printing:
    Laboratory Testing of Fresh Printing Mixture
  103. Rushing Todd, Chaar Ghassan, Eick Brian, Burroughs Jedadiah et al. (2017-01)
    Investigation of Concrete Mixtures for Additive Construction
  104. Wörner Mark, Schmeer Daniel, Schuler Benjamin, Pfinder Julian et al. (2016-12)
    The Technology of Graded Concrete:
    From the Development of Concrete Mixtures and the Conceptual Design to the Automatized Manufacturing
  105. Beigh Mirza, Nerella Venkatesh, Schröfl Christof, Mechtcherine Viktor (2015-06)
    Studying the Rheological Behavior of Limestone-Calcined-Clay-Cement (LC3) Mixtures in the Context of Extrusion-Based 3D Printing