Skip to content

#light

Keywords by Co - Occurrence

  1. Nguyen Vuong, Jie Cheah, Lao Junying, Huanyu Zhao et al. (2026-01)
    Performance of Lightweight, Reinforced, and Assemblable 3D-Printed Concrete Columns with Low-Carbon Engineered Cementitious Composites
  2. Cárdenas Valeria, Parmigiani Silvia, Vargas Juan, Restuccia Luciana et al. (2026-01)
    Incorporation of Vitrified Ashes in Lightweight Foamed Concrete for 3D Printing:
    Thermal and Mechanical Assessment
  3. Wang Hanmo, Wan Yujia, Owyong Shawn, Connie Lim En et al. (2026-01)
    Towards Low-Carbon Construction:
    Nature-Inspired Internal Patterns for Thermal Insulation in Lightweight Concrete Component Cast Using 3D-Printed Formwork
  4. Kovaleva Daria, Haufe Carl, Miller Olga, Gericke Oliver et al. (2025-12)
    Lightweight and Sustainable Construction with Concrete:
    The Role of Digital Design and Manufacturing Methods at ILEK
  5. Rangel Carolina, Salet Theo, Lucas Sandra (2025-12)
    A Design Methodology for Sustainable Lightweight 3D-Printable Concrete with SCMs
  6. Tao Jie-Lin, Hu Shengming, Duan Zhenhua, Jiao Dengwu (2025-11)
    Magneto-Responsive Flow Behavior and Early-Age Microstructural Evolution of 3D Printing Lightweight Concrete with Fly Ash Cenospheres
  7. Sičáková Alena, Verčimák Dominik (2025-11)
    Lightweight Mixtures with a High Proportion of Recycled Fillers in Terms of 3D Printing Parameters
  8. Banijamali Kasra, Martin Michael, Mascarenas David, Kazemian Ali (2025-11)
    Automated Inspection in Robotic 3D Printing:
    In-Process Geometrical Measurements Using Structured Light Machine Vision
  9. Müller Niklas, Claßen Martin (2025-10)
    Additive Manufacturing of Topology-Optimized Lightweight Slabs Using Foam Concrete
  10. Wang Huai, Li Xiulin, Gong Hao, Xu Jingjie et al. (2025-10)
    Thermal and Mechanical Properties of 3D-Printed Fiber-Reinforced Lightweight Concrete Based on Air Entrainment and Hollow Glass Microspheres
  11. Maroszek Marcin, Rudziewicz Magdalena, Rusin-Żurek Karina, Hager Izabela et al. (2025-09)
    Recycled Materials and Lightweight Insulating Additions to Mixtures for 3D Concrete Printing
  12. Liu Ruiqing, Du Hongjian (2025-09)
    Optimizing Thermal Insulation Through Geometric Design:
    Comparative Analysis of Normal and Lightweight 3D Printed Concrete Wall Patterns
  13. Sahu Akshay, Sharma Deepak, Panda Biranchi (2025-09)
    Tailoring Topology-Optimized Lightweight Concrete Beam Design for Additive Manufacturing
  14. Aminpour Nima, Memari Ali (2025-05)
    Development of EPS Light‐weight Concrete for 3D Printing
  15. Hua Hao, Liu Yizhuo, Hovestadt Ludger, He Siyuan et al. (2025-04)
    Digital Nervi:
    Performance‐based Design of Lightweight Isostatic Ribbed Slab with 3D Printed Concrete Formwork
  16. Rudziewicz Magdalena, Hutyra Adam, Maroszek Marcin, Korniejenko Kinga et al. (2025-04)
    3D-Printed Lightweight Foamed Concrete with Dispersed Reinforcement
  17. Lin Yuxin, Bayramvand Alireza, Meibodi Mania (2025-04)
    Towards Lightweight Structure:
    Coupling Topology Optimization with Non-Planar 3D Concrete Printing
  18. Araújo Rísia, Martinelli Antônio, Cabral Kleber, Nunes Ueslei et al. (2025-03)
    Effect of Lightweight Expanded Clay Aggregate (LECA) On the Printability of Cementitious Compositions for 3D Printing
  19. Duan Zhenhua, Tao Jie-Lin, Lin Can, Jiao Dengwu et al. (2025-02)
    3D Printing-Driven Dynamic Migration of Lightweight Microspheres in the Printable Mortars:
    Experiment and Modelling
  20. Bayat Hamid, Karimpouli Sagegh, Yang Liming, Ramandi Hamed et al. (2025-02)
    Investigation of Interlayer Bonding and Pore Characteristics in 3D-Printed High-Strength Mortar Incorporating Recycled Lightweight Aggregates
  21. Liu Qiang, Jiang Quan, Zhao Herui, Yu Yang et al. (2025-02)
    Porous Diatomite Promotes Lightweight and Low-Carbon Concrete 3D Printing:
    An Exploratory Study
  22. Dey Dhrutiman, Kumar Gaurav, Prasad Ventrapragada, Panda Biranchi (2024-12)
    Experimental Investigation of Thermal Performance of 3D Printed Slab Infused with Lightweight Concrete as Insulation
  23. Kleibel-McGee Kilian, Gosch Lukas, Jauk Julian, Ristoski Kristijan et al. (2024-11)
    Integration of Weaving- and Sewing-Motions into the 3D Printing of Clay for Lightweight Ceramic-Structures
  24. Aminpour Nima, Memari Ali (2024-10)
    Numerical and Experimental Study on Reinforced 3DCP Walls Filled with Lightweight Concrete
  25. Cuevas Villalobos Karla, Chung Sang-Yeop, Sikora Paweł, Stephan Dietmar (2024-10)
    Performance of Normal-Weight and Lightweight 3D Printed Cementitious Composites with Recycled Glass:
    Sorption and Microstructural Perspective
  26. Carcassi Olga, Akemah Tashania, Alon Lola (2024-09)
    3D Printed Lightweight Earth Fiber:
    From Tiles to Tessellations
  27. Lindner Marco, Gliniorz Ralf, Funke Henrik, Gelbrich Sandra (2024-09)
    Additive Flow Production of Lightweight Precision Concrete Elements
  28. Krakovská Ema, Briels David, Straßer Alexander, Kränkel Thomas et al. (2024-09)
    Functionally Hybridised Lightweight Concrete Components:
    Monolithic Building Construction Using Selective Paste-Intrusion
  29. Meibodi Mania, Lin Yuxin, Chen Hao (2024-09)
    Hybrid Approaches Towards 3D Concrete Printing for Lightweight Reinforced Concrete Structures
  30. Lehr Leonard, Pfeiffer Sven, Rasanani Mahdieh, Stephan Dietmar et al. (2024-09)
    3D Light on Site:
    Bringing Concrete Print to the Construction Site
  31. Hlaváček Petr, Wolf Christoph, Robens-Radermacher Annika, Kühne Hans-Carsten (2024-09)
    Powder-Bed 3D Printing of Cementitious Materials for Lightweight Construction Elements
  32. Obermeier Nico, Brunner Kim, Wiese Felix, Stengel Thorsten (2024-09)
    Development of Low-Cement Lightweight Concrete Mixes for 3D Extrusion Printing
  33. Rangel Carolina, Salet Theo, Lucas Sandra (2024-09)
    A Framework for Crafting Sustainable Lightweight Concrete in Additive Manufacturing
  34. Ojeda Juan, Grebner Philipp, Knaack Ulrich, Rosendahl Philipp (2024-09)
    3D Printing with WAAM to Form and Stiffen Lightweight Steel Panels for Freeform Façades
  35. Carpo Mario (2024-09)
    The Sustainable Lightness of Digital Fabrication
  36. Liu Xiongfei, Cai Huachong, Sun Yuhang, Wang Li et al. (2024-08)
    Spray-Based 3D Printed Foam-Concrete:
    Cooperative Optimization for Lightweight and High-Strength Performance
  37. Yan Kang-Tai, Wang Xian-Peng, Ding Yao, Li Lingzhi et al. (2024-06)
    3D Printed LC3-Based Lightweight Engineered Cementitious Composites:
    Fresh State, Hardened Material-Properties and Beam-Performance
  38. Bodur Burak, Mecit Işık Muhammet, Benli Ahmet, Bayrak Barış et al. (2024-05)
    Durability of Green Rubberized 3D Printed Lightweight Cement Composites Reinforced with Micro-Attapulgite and Micro-Steel-Fibers:
    Printability and Environmental Perspective
  39. Rangel Carolina, Guimarães Ana, Salet Theo, Lucas Sandra (2024-03)
    3D Printing Lightweight Mortars with Cork to Improve Thermal Efficiency in Buildings
  40. Zandifaez Peyman, Shen Zhenglai, Sorgenfrei Reese, Li Yucen et al. (2024-03)
    Pathways to Formulate Lightweight and Ultra-Lightweight 3D Printable Cementitious Composites
  41. Xiong Baocheng, Nie Ping, Liu Huanbao, Li Xiaoxi et al. (2024-03)
    Optimization of Fiber-Reinforced Lightweight Rubber-Concrete Mix-Design for 3D Printing
  42. Niu Geng, Liu Chao, Jia Lutao, Ma Lei et al. (2024-03)
    Preparation and Performance-Analysis of 3D Printed Lightweight EPS-Concrete:
    Insights from the Excess-Paste-Theory
  43. Sun Junbo, Liu Shukui, Ma Zhangguo, Wang Di et al. (2024-03)
    3D Printed Lightweight Concrete Containing Surface-Pretreated Coal-Gangue
  44. Gou Hongxiang, Sofi Massoud, Zhang Zipeng, Zhu Mintao et al. (2024-03)
    Combined Printable and Mechanical Analysis of 3D Printed Green High-Strength, Lightweight Engineered Cementitious Composites
  45. Azimi Zahir, Mousavi Moein, Bengar Habib, Javadi Akbar (2023-12)
    Study on the Post-Fire Mechanical Properties of Lightweight 3D Printed Concrete Containing Expanded Perlite as Partial Replacement of Natural Sand
  46. Bedarf Patrick, Szabó Anna, Zanini Michele, Dillenburger Benjamin (2023-11)
    Robotic 3D Printing of Geopolymer Foam for Lightweight and Insulating Building Elements
  47. Bosbach Sven, Kalthoff Matthias, Cruz Cynthia, Adam Viviane et al. (2023-11)
    Digital Prefabrication of Lightweight Building Elements for Circular Economy:
    Material-Minimised Ribbed Floor Slabs Made of Extruded Carbon Reinforced Concrete (ExCRC)
  48. Ye Junhong, Zhang Jiangdi, Yu Jie, Yu Jiangtao et al. (2023-11)
    Flexural Behaviors of 3D Printed Lightweight Engineered Cementitious Composites (ECC) Slab with Hollow Sections
  49. Skripkiūnas Gintautas, Girskas Giedrius, Rishko Lyudmyla (2023-10)
    Lightweight Portland Cement Mixtures with Perlite for 3D Printing of Concrete Structures
  50. Bumanis Girts, Sapata Alise, Šinka Māris, Spuriņa Ella et al. (2023-10)
    Additive Manufacturing of Lightweight Gypsum and Expanded Polystyrene Granulate Composite
  51. Sedghi Reza, Zafar Muhammad, Hojati Maryam (2023-10)
    Exploring Fresh and Hardened Properties of Sustainable 3D Printed Lightweight Cementitious Mixtures
  52. Ospina Salazar Ana, Valencia Isaza Andrés, Restrepo Montoya José, Mejía Arcila Johanna et al. (2023-09)
    Upcycling Fly-Ash, Red-Clay-Brick Waste, and Paper-Sludge as Feedstock for Manufacturing a Lightweight Extruded Composite:
    Design and Characterization
  53. Kalthoff Matthias, Bosbach Sven, Backes Jana, Cruz Cynthia et al. (2023-06)
    Fabrication of Lightweight, Carbon Textile Reinforced Concrete Components with Internally Nested Lattice Structure Using 2-Layer Extrusion by LabMorTex
  54. Nodehi Mehrab, Omer Liam, Asiabanpour Bahram, Ozbakkaloglu Togay (2023-04)
    A Novel Lightweight Mechanism for 3D Printing of Cementitious Materials
  55. Cuevas Villalobos Karla, Strzałkowski Jarosław, Kim Ji-Su, Ehm Clemens et al. (2023-02)
    Towards Development of Sustainable Lightweight 3D Printed Wall Building Envelopes:
    Experimental and Numerical Studies
  56. Xia Lingwei, Bi Minghao, Wu Jie, Wang Fang et al. (2023-01)
    Integrated Lightweight Design-Method via Structural Optimization and Path-Planning for Material-Extrusion
  57. Clarke-Hicks James, Ochoa Isabel, Correa David (2022-12)
    Harnessing Plastic Deformation in Porous 3D Printed Ceramic Light Screens
  58. Deng Zhicong, Jia Zijian, Zhang Chao, Wang Zhibin et al. (2022-10)
    3D Printing Lightweight Aggregate Concrete Prepared with Shell-Packing-Aggregate Method:
    Printability, Mechanical Properties and Pore-Structure
  59. Hansemann Georg, Holzinger Christoph, Schmid Robert, Tapley Joshua et al. (2022-09)
    Lightweight Reinforced Concrete Slab
  60. Briels David, Kollmannsberger Stefan, Leithner Felicitas, Matthäus Carla et al. (2022-07)
    Thermal Optimization of Additively Manufactured Lightweight Concrete Wall Elements with Internal Cellular Structure through Simulations and Measurements
  61. Kovaleva Daria, Nistler Maximilian, Verl Alexander, Blandini Lucio et al. (2022-06)
    Zero-Waste Production of Lightweight Concrete Structures with Water-Soluble Sand Formwork
  62. Xiao Yinan, Hack Norman, Kloft Harald (2022-06)
    Digital Structural Design and Shotcrete 3D Printing-Strategies for Lightweight Reinforced Concrete Beam-Grid Structures
  63. Geng Zifan, Pan Hao, Zuo Wenqiang, She Wei (2022-05)
    Functionally Graded Lightweight Cement-Based Composites with Outstanding Mechanical Performances via Additive Manufacturing
  64. Bedarf Patrick, Szabó Anna, Zanini Michele, Heusi Alex et al. (2022-04)
    Robotic 3D Printing of Mineral Foam for a Lightweight Composite Concrete Slab
  65. Kovaleva Daria, Nistler Maximilian, Blandini Lucio, Sobek Werner et al. (2022-04)
    Recyclable Sand Formwork:
    Towards Circular Production of Lightweight Concrete Structures
  66. Wu Zixia, Xu Yading, Šavija Branko (2021-12)
    Mechanical Properties of Lightweight Cementitious Cellular Composites Incorporating Micro-Encapsulated Phase-Change-Material
  67. Kilic Ugur, Yang Yang, Ma Ji, Ozbulut Osman (2021-12)
    Rheological and Thermal Characterization of 3D Printable Lightweight Cementitious Composites with Fly-Ash-Cenospheres
  68. Ramakrishnan Sayanthan, Muthukrishnan Shravan, Sanjayan Jay, Pasupathy Kirubajiny (2021-08)
    Concrete 3D Printing of Lightweight Elements Using Hollow-Core Extrusion of Filaments
  69. Nodehi Mehrab, Asiabanpour Bahram, Omer Liam, Ozbakkaloglu Togay (2021-08)
    Material-Characterization of Diversity Aggregated Cementitious Materials Produced with a Modular Lightweight Additive Manufacturing Extrusion-System
  70. Lowke Dirk, Vandenberg Aileen, Pierre Alexandre, Thomas Amaury et al. (2021-07)
    Injection 3D Concrete Printing in a Carrier Liquid:
    Underlying Physics and Applications to Lightweight Space Frame Structures
  71. Sun Junbo, Aslani Farhad, Lu Jenny, Wang Lining et al. (2021-06)
    Fiber-Reinforced Lightweight Engineered Cementitious Composites for 3D Concrete Printing
  72. Cuevas Villalobos Karla, Chougan Mehdi, Martin Falk, Ghaffar Seyed et al. (2021-05)
    3D Printable Lightweight Cementitious Composites with Incorporated Waste-Glass-Aggregates and Expanded Microspheres:
    Rheological, Thermal and Mechanical Properties
  73. Brooks Adam, Zhou Hongyu (2021-04)
    Developing 3D Printable Lightweight Functional Cementitious Composite
  74. Dielemans Gido, Briels David, Jaugstetter Fabian, Henke Klaudius et al. (2021-04)
    Additive Manufacturing of Thermally Enhanced Lightweight Concrete Wall Elements with Closed Cellular Structures
  75. Bedarf Patrick, Schulte Dinorah, Şenol Ayça, Jeoffroy Etienne et al. (2021-04)
    Robotic 3D Printing of Mineral Foam for a Lightweight Composite Facade Shading Panel
  76. Suntharalingam Thadshajini, Gatheeshgar Perampalam, Upasiri Irindu, Poologanathan Keerthan et al. (2021-02)
    Numerical Study of Fire and Energy Performance of Innovative Lightweight 3D Printed Concrete Wall-Configurations in Modular Building System
  77. Matthäus Carla, Kofler Nadine, Kränkel Thomas, Weger Daniel et al. (2020-10)
    Inter-Layer Reinforcement Combined with Fiber-Reinforcement for Extruded Lightweight Mortar Elements
  78. Hansemann Georg, Schmid Robert, Holzinger Christoph, Tapley Joshua et al. (2020-09)
    Additive Fabrication of Concrete Elements by Robots:
    Lightweight Concrete Ceiling
  79. Falliano Devid, Crupi Giuseppe, Domenico Dario, Ricciardi Giuseppe et al. (2020-07)
    Investigation on the Rheological Behavior of Lightweight Foamed Concrete for 3D Printing Applications
  80. Henke Klaudius, Talke Daniel, Matthäus Carla (2020-07)
    Additive Manufacturing by Extrusion of Lightweight Concrete:
    Strand Geometry, Nozzle Design and Layer Layout
  81. Matthäus Carla, Back Daniel, Weger Daniel, Kränkel Thomas et al. (2020-07)
    Effect of Cement-Type and Limestone-Powder-Content on Extrudability of Lightweight Concrete
  82. Mohammad Malek, Masad Eyad, Seers Thomas, Ghamdi Sami (2020-07)
    High-Performance Lightweight Concrete for 3D Printing
  83. Verian Kho, Ashcroft Jarron, Carli Matthew, Bright Randall et al. (2020-07)
    Improving the Bonding Adhesion of the Cold Joints of Normal and Lightweight 3D Printing Mortars
  84. Weger Daniel, Kim Heejeong, Talke Daniel, Henke Klaudius et al. (2020-07)
    Lightweight Concrete 3D Printing by Selective Cement-Activation:
    Investigation of Thermal Conductivity, Strength and Water-Distribution
  85. Falliano Devid, Domenico Dario, Ricciardi Giuseppe, Gugliandolo Ernesto (2020-04)
    3D Printable Lightweight Foamed Concrete and Comparison with Classical Foamed Concrete in Terms of Fresh State Properties and Mechanical Strength
  86. Rahul Attupurathu, Santhanam Manu (2020-02)
    Evaluating the Printability of Concretes Containing Lightweight Coarse Aggregates
  87. Wang Li, Jiang Hailong, Li Zhijian, Ma Guowei (2020-02)
    Mechanical Behaviors of 3D Printed Lightweight Concrete Structure with Hollow Section
  88. Wi Kwangwoo, Suresh Vignesh, Wang Kejin, Li Beiwen et al. (2019-12)
    Quantifying Quality of 3D Printed Clay Objects Using a 3D Structured Light Scanning System
  89. Falliano Devid, Sciarrone Antonino, Domenico Dario, Maugeri Natale et al. (2019-10)
    Fiber-Reinforced Lightweight Foamed Concrete Panels Suitable for 3D Printing Applications
  90. Matthäus Carla, Weger Daniel, Kränkel Thomas, Carvalho Luis et al. (2019-09)
    Extrusion of Lightweight Concrete:
    Rheological Investigations
  91. Cho Seung, Kruger Jacques, Rooyen Algurnon, Zeranka Stephan et al. (2019-09)
    Rheology of 3D Printable Lightweight Foam-Concrete Incorporating Nano-Silica
  92. Cho Seung, Kruger Jacques, Zeranka Stephan, Rooyen Algurnon et al. (2019-06)
    Mechanical Evaluation of 3D Printable Nano-Silica Incorporated Fiber-Reinforced Lightweight Foam-Concrete
  93. Meibodi Mania, Jipa Mihail-Andrei, Giesecke Rena, Shammas Demetris et al. (2018-10)
    Smart Slab:
    Computational Design and Digital Fabrication of a Lightweight Concrete Slab
  94. Dubois Vincent, Leblanc Alexandre, Carpentier Olivier, Alhaik Ghaith et al. (2018-01)
    Performances of Flax Shive-Based Lightweight Composites with Rapid Hardening