Three-Dimensional Concrete Printing as a Construction-Automation-Strategy and Assessments from a Case Study Building (2024-03)¶
Journal Article - Journal of Architectural Engineering, Vol. 30, Iss. 2
Abstract
Numerous techniques and technologies exist to automate construction-related tasks, which include the latest three-dimensional concrete printing (3DCP) methodology. These automation techniques seek to solve the entrenched problems in construction, such as declining productivity, shortage of skilled workers, ineffectiveness in project management, unsustainability, and the increase in construction demand. The 3DCP has further benefits, such as quicker construction times, design freedom, and more predictability. However, there is resistance to adopting 3DCP in the industry and by the market. With experience from a 3DCP organization and a case study on a 3DCP villa, this paper presents the major challenges that hinder this technology’s adoption and use, important lessons learned from the villa construction, and highlights of the local community’s critical feedback.
¶
35 References
- Alabbasi Mohammad, Agkathidis Asterios, Chen Hanmei (2023-01)
Robotic 3D Printing of Concrete Building Components for Residential Buildings in Saudi Arabia - Albar Abdulrahman, Chougan Mehdi, Kheetan Mazen, Swash Mohammad et al. (2020-04)
Effective Extrusion-Based 3D Printing System Design for Cementitious-Based Materials - Asprone Domenico, Menna Costantino, Bos Freek, Salet Theo et al. (2018-06)
Rethinking Reinforcement for Digital Fabrication with Concrete - Bosscher Paul, Williams Robert, Bryson L., Castro-Lacouture Daniel (2007-04)
Cable-Suspended Robotic Contour Crafting System - Buswell Richard, Silva Wilson, Jones Scott, Dirrenberger Justin (2018-06)
3D Printing Using Concrete-Extrusion:
A Roadmap for Research - Cui Hongzhi, Li Yuanhong, Cao Xiangpeng, Huang Mingyang et al. (2022-03)
Experimental Study of 3D Concrete Printing-Configurations Based on the Buildability Evaluation - Davila Delgado Juan, Oyedele Lukumon, Ajayi Anuoluwapo, Akanbi Lukman et al. (2019-07)
Robotics and Automated Systems in Construction:
Understanding Industry-Specific Challenges for Adoption - Gosselin Clément, Duballet Romain, Roux Philippe, Gaudillière-Jami Nadja et al. (2016-03)
Large-Scale 3D Printing of Ultra-High-Performance Concrete:
A New Processing Route for Architects and Builders - Hahlbrock David, Braun Michael, Heidel Robin, Lemmen Patrik et al. (2022-10)
Cable Robotic 3D Printing:
Additive Manufacturing on the Construction Site - Hambach Manuel, Rutzen Matthias, Volkmer Dirk (2019-02)
Properties of 3D-Printed Fiber-Reinforced Portland Cement-Paste - Hwang Dooil, Khoshnevis Behrokh (2004-09)
Concrete Wall Fabrication by Contour Crafting - Kazemian Ali, Giwa Ilerioluwa, Ekenel Mahmut (2023-06)
Large-Scale Additive Manufacturing for Automated Construction:
An Overview - Li Zhanzhao, Hojati Maryam, Wu Zhengyu, Piasente Jonathon et al. (2020-07)
Fresh and Hardened Properties of Extrusion-Based 3D Printed Cementitious Materials:
A Review - Lowke Dirk, Dini Enrico, Perrot Arnaud, Weger Daniel et al. (2018-07)
Particle-Bed 3D Printing in Concrete Construction:
Possibilities and Challenges - Marchment Taylor, Sanjayan Jay, Nematollahi Behzad, Xia Ming (2019-02)
Inter-Layer Strength of 3D Printed Concrete - Mechtcherine Viktor, Bos Freek, Perrot Arnaud, Silva Wilson et al. (2020-03)
Extrusion-Based Additive Manufacturing with Cement-Based Materials:
Production Steps, Processes, and Their Underlying Physics - Menna Costantino, Mata-Falcón Jaime, Bos Freek, Vantyghem Gieljan et al. (2020-04)
Opportunities and Challenges for Structural Engineering of Digitally Fabricated Concrete - Moeini Mohammad, Hosseinpoor Masoud, Yahia Ammar (2022-04)
3D Printing of Cement-Based Materials with Adapted Buildability - Mohan Manu, Rahul Attupurathu, Schutter Geert, Tittelboom Kim (2020-10)
Extrusion-Based Concrete 3D Printing from a Material Perspective:
A State of the Art Review - Pasupathy Kirubajiny, Ramakrishnan Sayanthan, Sanjayan Jay (2023-01)
3D Concrete Printing of Eco-Friendly Geopolymer Containing Brick Waste - Paul Suvash, Zijl Gideon, Tan Ming, Gibson Ian (2018-05)
A Review of 3D Concrete Printing Systems and Materials Properties:
Current Status and Future Research Prospects - Perrot Arnaud, Rangeard Damien, Nerella Venkatesh, Mechtcherine Viktor (2019-02)
Extrusion of Cement-Based Materials:
An Overview - Pott Ursula, Jakob Cordula, Dorn Tobias, Stephan Dietmar (2023-07)
Investigation of a Shotcrete-Accelerator for Targeted Control of Material-Properties for 3D Concrete Printing Injection-Method - Puzatova (nee Sharanova) Anastasiia, Shakor Pshtiwan, Laghi Vittoria, Dmitrieva Maria (2022-11)
Large-Scale 3D Printing for Construction Application by Means of Robotic Arm and Gantry 3D Printer:
A Review - Rehman Atta, Kim Jung-Hoon (2021-07)
3D Concrete Printing:
A Systematic Review of Rheology, Mix Designs, Mechanical, Microstructural, and Durability Characteristics - Rehman Atta, Melesse Birru, Kim Jung-Hoon (2023-02)
Set-on-Demand 3D Concrete Printing Construction and Potential Outcome of Shotcrete-Accelerators on Its Hardened Properties - Rehman Atta, Perrot Arnaud, Birru Bizu, Kim Jung-Hoon (2023-09)
Recommendations for Quality-Control in Industrial 3D Concrete Printing Construction with Mono-Component Concrete:
A Critical Evaluation of Ten Test-Methods and the Introduction of the Performance-Index - Reinold Janis, Nerella Venkatesh, Mechtcherine Viktor, Meschke Günther (2022-02)
Extrusion-Process-Simulation and Layer-Shape-Prediction During 3D Concrete Printing Using the Particle-Finite-Element-Method - Roussel Nicolas, Buswell Richard, Ducoulombier Nicolas, Ivanova Irina et al. (2022-06)
Assessing the Fresh Properties of Printable Cement-Based Materials:
High-Potential Tests for Quality-Control - Salet Theo, Ahmed Zeeshan, Bos Freek, Laagland Hans (2018-05)
Design of a 3D Printed Concrete Bridge by Testing - Strohle Max, Sadique Monower, Dulaimi Anmar, Kadhim Mustafa (2022-11)
Prospect and Barrier of 3D Concrete:
A Systematic Review - Tu Haidong, Wei Zhenyun, Bahrami Alireza, Kahla Nabil et al. (2023-06)
Recent Advancements and Future Trends in 3D Printing Concrete Using Waste-Materials - Wolfs Robert, Bos Derk, Salet Theo (2023-06)
Lessons Learned of Project Milestone:
The First 3D Printed Concrete House in the Netherlands - Xiao Jianzhuang, Zou Shuai, Ding Tao, Duan Zhenhua et al. (2021-08)
Fiber-Reinforced Mortar with 100% Recycled Fine Aggregates:
A Cleaner Perspective on 3D Printing - Yang Liming, Sepasgozar Samad, Shirowzhan Sara, Kashani Alireza et al. (2022-12)
Nozzle Criteria for Enhancing Extrudability, Buildability and Inter-Layer Bonding in 3D Printing Concrete
0 Citations
BibTeX
@article{alha.2024.TDCPaaCASaAfaCSB,
author = "Haidar Alhaidary",
title = "Three-Dimensional Concrete Printing as a Construction-Automation-Strategy and Assessments from a Case Study Building",
doi = "10.1061/jaeied.aeeng-1714",
year = "2024",
journal = "Journal of Architectural Engineering",
volume = "30",
number = "2",
}
Formatted Citation
H. Alhaidary, “Three-Dimensional Concrete Printing as a Construction-Automation-Strategy and Assessments from a Case Study Building”, Journal of Architectural Engineering, vol. 30, no. 2, 2024, doi: 10.1061/jaeied.aeeng-1714.
Alhaidary, Haidar. “Three-Dimensional Concrete Printing as a Construction-Automation-Strategy and Assessments from a Case Study Building”. Journal of Architectural Engineering 30, no. 2 (2024). https://doi.org/10.1061/jaeied.aeeng-1714.