Skip to content

#case

Keywords by Co - Occurrence

  1. Gnanaraj Anies, Moreno Leyla, Thabet Reham, Rangel Bárbara et al. (2026-01)
    Comparative Analysis of Onsite Versus Offsite 3D Printing in Construction:
    Benefits, Challenges, and Case Studies
  2. Nadais Mariana, Cunha Rui, Pessoa Ana Sofia, Delgado João et al. (2026-01)
    Enhancing Indoor Environmental Quality Through Real-Time Monitoring:
    A Case Study of a 3D-Printed House
  3. Kim Young, Scoppa Martin, Haddad Madhar (2025-10)
    An Investigation into the Role of 3D Printing in Residential Buildings:
    An Emirati Housing Case Study
  4. Ataei Sarah, Jafari Amirhosein (2025-10)
    Comparative Environmental Impact Assessment of 3D Concrete Printing and Precast Techniques in Bridge Construction:
    A Case Study Analysis
  5. Altehaini Zakiah, Dayili Mohammed, Alrajab Meshari, Harbi Adel et al. (2025-10)
    Deploying 3D Concrete Printing for Large-Scale Building Construction in Saudi Arabia:
    A Case Study
  6. Wang Yufei, Sun Junbo, Wang Xiangyu, Huang Bo et al. (2025-09)
    Environmental and Economic Evaluation of a Prefabricated 3D-Printed Structural Units Using Recycled Aggregates from Construction and Demolition Waste:
    A Case Study in China
  7. Henao-Rios Laura, Orobio Armando, Campaña Wilmer (2025-08)
    BIM Integration in Prefabricated Additive Construction Projects:
    Case Study
  8. Limlunjakorn Torpong (2025-08)
    The Designing of 3D-Printed Modular Artificial Reefs Through Design Thinking Framework:
    A Case Study in Koh Khai, Chumphon Province, Thailand
  9. Banda-Pérez Pablo, Georgiou Ioulios, Carrasco Pérez Patricio, Soria Romanella et al. (2025-07)
    Deployment for Additive Construction Through Digital Platforms:
    Gananoque Project as a Case Study
  10. Liang Jingwen, Zeng Zuo, Wang Penglin, Wang Zhongxu et al. (2025-07)
    Emergency Response Mobile 3D Printing System:
    A Case Study in Rapid Manufacturing of Polyurethane Foam Bridges
  11. Karamara Merve, Bogdanski Moritz-Ole, Zöller Raphael, Albrecht Sophie et al. (2025-06)
    Increasing Efficiency and Sustainability:
    A Comparative Analysis of Concrete 3D Printing and Traditional Methods Based on Case Studies
  12. Zuo Zibo, Zhang Yamei, Li Jin, Huang Yulin et al. (2025-03)
    Systematic Workflow for Digital Design and On-Site 3D Printing of Large Concrete Structures:
    A Case Study of a Full-Size Two-Story Building
  13. Albrecht Sophie, Hellerbrand Stefan, Weininger Florian, Thiel Charlotte (2025-02)
    Strategies for Minimizing Environmental Impact in Construction:
    A Case Study of a Cementitious 3D Printed Lost Formwork for a Staircase
  14. Engel Sven, Hegger Josef, Claßen Martin (2025-02)
    Multimodal Automated Fabrication with Concrete:
    Case-Study and Structural Performance of Ribbed CFRP-Reinforced Concrete Ceiling
  15. Lolli Francesca, Mehlomakulu Bungane, Monkman Sean (2025-01)
    Case Study of 3D Printed Concrete as Compared to Conventional Construction:
    Structural Comparison and Life Cycle Carbon Assessment
  16. Vele Jiří, Melter Oto, Hvizdal Ales, Achten Henri et al. (2024-09)
    Enhancing 3D Concrete Printing Buildability with Non-Planar Layering:
    A Case Study
  17. Ammann Rebecca, Gebhard Lukas, Thoma Karel, Mata-Falcón Jaime et al. (2024-09)
    Environmental Benefits of Concrete Floor Slabs Produced with Digitally Fabricated Formworks:
    A Case Study
  18. Bhattacherjee Shantanu, Jain Smrati, Pratapa Phanisri, Santhanam Manu et al. (2024-09)
    Construction of Boundary Wall for an International Cricket Stadium in India:
    A Case Study
  19. Monkman Sean, Hernandez Margarita, Moreno Daniel (2024-09)
    A Case Study in Industrialized 3D Printing:
    A One Hundred Home Community Near Austin, Texas
  20. Versteege Jelle, Wolfs Robert, Salet Theo (2024-09)
    A Data-Driven View on Digital Fabrication with Concrete:
    The Case of Inter-Layer Bond Strength
  21. Nana W., Dell’Endice Alessandro, Bhooshan Vishu, Zhou Fulei et al. (2024-09)
    Decarbonizing Concrete Construction:
    Case of the Phoenix 3D Printed Footbridge and Learnings for Engineering and Architecture
  22. Diggs-McGee Brandy, Kreiger Megan, Kreiger Eric, Negron-McFarlane Christian (2024-09)
    Case Study on the Use of Thermographic Analysis to Evaluate an Additively Constructed Building
  23. Melcher Grace, Rauch Andy, Yashar Melodie, Ballard Jason (2024-08)
    3D Printing ICONs Cosmic Pavilion:
    A Case Study in Cementitious Extrusion of Unsupported Cantilevers
  24. Gebhard Lukas, Mata-Falcón Jaime, Ammann Rebecca, Pressmair Nadine et al. (2024-08)
    Enhancing Structural Efficiency with Digital Concrete:
    Principles, Opportunities and Case Studies
  25. Ahmad Lina, Jabi Wassim, Sosa Marco (2024-08)
    Non-Planar Robotic Printing of Earth-Based Material:
    A Case Study Using Cob-Like Mixture
  26. Nhieu Nhat-Luong, Dang Tri (2024-07)
    An Integrated T-Spherical Fuzzy Einstein Interaction Aggregator Group Decision-Making Approach:
    A Case Study of Concrete 3D Printing Robot Application in Vietnam
  27. Rückrich Stefanie, Agranati Galit, Grobman Yasha (2024-05)
    Evaluating Clay Characteristics for Printable Geo-Materials:
    A Case Study of Clay-Sand Mixes
  28. Corneliusen Julie, Horswill Duncan (2024-04)
    Reshaping Fabrication:
    A Case Study in Designing Carbon-Reduced Concrete Structures
  29. Alhaidary Haidar (2024-03)
    Three-Dimensional Concrete Printing as a Construction-Automation-Strategy and Assessments from a Case Study Building
  30. Hass Lauri, Nefs Karsten, Bos Freek, Salet Theo (2023-10)
    Application Potential of Combining Strain-Hardening Cementitious Composites and Helical Reinforcement for 3D Concrete Printed Structures:
    Case Study of a Spiral Staircase
  31. Almomani Mohammed, Ababneh Nedal, Abdalla Khairedin, Shbeeb Nadim et al. (2023-07)
    Selecting the Best 3D Concrete Printing Technology for Refugee Camp’s Shelter Construction Using Analytical Hierarchy Process:
    The Case of Syrian Refugees in Jordan
  32. Balkhy Wassim, Bing Scott, Babidi Saad, Lafhaj Zoubeir et al. (2023-07)
    The Analysis of Lean Wastes in Construction 3D Printing:
    A Case Study
  33. Hu Rongbo, Pan Wen, Iturralde Kepa, Linner Thomas et al. (2023-07)
    Construction Automation and Robotics for Concrete Construction:
    Case Studies on Research, Development, and Innovations
  34. Daher Jana, Kleib Joelle, Benzerzour Mahfoud, Abriak Nor-Edine et al. (2023-06)
    The Development of Soil-Based 3D Printable Mixtures:
    A Mix-Design Methodology and a Case Study
  35. Gebhard Lukas, Mata-Falcón Jaime, Iqbal Arsalan, Kaufmann Walter (2023-01)
    Structural Behavior of Post-Installed Reinforcement for 3D Concrete Printed Shells:
    A Case Study on Water Tanks
  36. Bello Nicholas, Memari Ali (2022-12)
    Comparative Review of the Technology and Case Studies of 3D Concrete Printing of Buildings by Several Companies
  37. Rosendahl Philipp, Wolf Alexander (2022-07)
    The Business Case for 3D Printing in the Built Environment
  38. Dielemans Gido, Lachmayer Lukas, Recker Tobias, Atanasova Lidia et al. (2022-06)
    Mobile Additive Manufacturing:
    A Case Study of Clay Formwork for Bespoke In-Situ Concrete Construction
  39. Fuente Albert, Blanco Ana, Galeote Eduardo, Cavalaro Sergio (2022-04)
    Structural Fiber-Reinforced Cement-Based Composite Designed for Particle-Bed 3D Printing Systems:
    Case Study Parque De Castilla Footbridge in Madrid
  40. Buswell Richard, Bos Freek, Silva Wilson, Hack Norman et al. (2022-01)
    Digital Fabrication with Cement-Based Materials:
    Process Classification and Case Studies
  41. Ahmed Zeeshan, Wolfs Robert, Bos Freek, Salet Theo (2021-11)
    A Framework for Large-Scale Structural Applications of 3D Printed Concrete:
    The Case of a 29m Bridge in the Netherlands
  42. Gantner Stefan, Rothe Tom, Hühne Christian, Hack Norman (2021-11)
    Reinforcement-Strategies for Additive Manufacturing in Construction Based on Dynamic Fiber Winding:
    Concepts and Initial Case Studies
  43. Xu Emily, Tejada Karin, Walker David, Zivkovic Sasa et al. (2021-11)
    Measuring Flow- and Setting-Time for Three-Dimensionally Printed Mortar:
    Case Study
  44. Cohen Zach (2021-03)
    Recasting Concrete:
    A Case Study in Concrete 3D Printing as an Architectural Pedagogy
  45. Weng Yiwei, Mohamed Nisar, Lee Brian, Gan Nicole et al. (2021-02)
    Extracting BIM Information for Lattice Tool-Path-Planning in Digital Concrete Printing with Developed Dynamo Script:
    A Case Study
  46. Álvarez-Fernández Martina, Prendes-Gero María, González-Nicieza Celestino, Guerrero-Miguel Diego-José et al. (2021-02)
    Optimum Mix-Design for 3D Concrete Printing Using Mining-Tailings:
    A Case Study in Spain
  47. Ramadany Mohamed, Bajjou Mohamed (2021-01)
    Applicability and Integration of Concrete Additive Manufacturing in Construction Industry:
    A Case Study
  48. Gomaa Mohamed, Jabi Wassim, Veliz-Reyes Alejandro, Soebarto Veronica (2021-01)
    3D Printing System for Earth-Based Construction:
    Case Study of Cob
  49. He Rui, Li Mingkai, Gan Vincent, Ma Jun (2020-08)
    BIM-Enabled Computerized Design and Digital Fabrication of Industrialized Buildings:
    A Case Study
  50. Grasser Georg, Pammer Lorenz, Köll Harald, Werner E. et al. (2020-07)
    Complex Architecture in Printed Concrete:
    The Case of the Innsbruck University 350th Anniversary Pavilion COHESION
  51. Jagoda Jeneé, Diggs-McGee Brandy, Kreiger Megan, Schuldt Steven (2020-04)
    The Viability and Simplicity of 3D Printed Construction:
    A Military Case Study
  52. Nazarian Shadi, Duarte José, Bilén Sven, Memari Ali et al. (2020-03)
    An Overview of the Execution of 3D Printed Sub-Scale Habitat on Mars:
    A Case Study to Exemplify the Automated Construction Process
  53. Hack Norman, Mai (née Dressler) Inka, Brohmann Leon, Gantner Stefan et al. (2020-03)
    Injection 3D Concrete Printing (I3DCP):
    Basic Principles and Case Studies
  54. Aghimien Douglas, Aigbavboa Clinton, Aghimien Lerato, Thwala Wellington et al. (2020-01)
    Making a Case for 3D Printing for Housing Delivery in South Africa
  55. Dörfler Kathrin, Hack Norman, Sandy Timothy, Giftthaler Markus et al. (2019-09)
    Mobile Robotic Fabrication Beyond Factory Conditions:
    Case Study Mesh Mould Wall of the DFAB HOUSE
  56. Meng Xiangcheng, Zhang Xueqing (2019-07)
    Case-Study-Analysis for Development-Strategies of Construction 3D Printing
  57. Martins Pedro, Campos Paulo, Nunes Sandra, Sousa José (2018-09)
    The Tectonics of Digitally Fabricated Concrete:
    A Case for Robotic Hot Wire-Cutting
  58. Poullain Philippe, Paquet Elodie, Garnier Sébastien, Furet Benoît (2018-06)
    On-Site Deployment of 3D Printing for the Building Construction:
    The Case of YhnovaTM
  59. Krimi Imane, Lafhaj Zoubeir, Ducoulombier Laure (2017-05)
    Prospective Study on the Integration of Additive Manufacturing to Building Industry:
    Case of a French Construction Company
  60. Leach Neil, Carlson Anders, Khoshnevis Behrokh, Thangavelu Madhu (2012-09)
    Robotic Construction by Contour Crafting:
    The Case of Lunar Construction