Skip to content

#architecture

Keywords by Co - Occurrence

  1. Nguyen Vuong, Jie Cheah, Zhang Y., Wong Hong (2025-12)
    Effect of Infill Architecture on Structural Performance and Sustainability of 3D-Printed Reinforced Concrete Columns
  2. Baharlou Ehsan, Datta Ipsita, Ozbulut Osman (2025-12)
    Feasibility of 3D Printing Oyster Shell Waste Laden Hydrogel Inks for Developing Mycelium Composite in Architectural Materials
  3. Ruiz Pedro, Moreno Inna, Alvarado Rodrigo (2025-11)
    On the Tectonic Properties of 3D Printed Architecture:
    On the Tectonic Properties of 3D Printed Architecture
  4. Gümrük Idil, Schröder Torsten, Wolfs Robert, Salet Theo (2025-11)
    3DCP-CI:
    Developing a Circularity Indicator for Assessing 3DConcrete Printed Architectural Designs
  5. Adeel Muhammad (2025-11)
    Three-Dimensional Concrete Printing for Sustainable Construction and Architecture:
    A Comprehensive Review
  6. Bakr Somahi, Cruz Marcos, Mayor-Luque Ricardo (2025-10)
    Cura Salad:
    Robotic Heated Spatial 3D Printing of Salt-Clay Composites for Health-Oriented Vernacular Architecture
  7. Elselmy Rowan (2025-10)
    AI-Driven Cymatic Architecture:
    Integrating Generative AI and Sound Data for 3D Concrete Printed Façade Design
  8. Lopes de Aquino Brasil Alexander, Carmo Pena (2025-09)
    A Systematic Review of Robotic Additive Manufacturing Applications in Architecture, Engineering, and Construction
  9. Yousaf Arslan, Rashid Ans, Koç Muammer (2025-09)
    Additive Manufacturing for Vernacular Architecture Using Local Earthen Soil and Bio-Waste Materials
  10. Kim-Tackowiak Hajin, Carstensen Josephine (2025-09)
    Topology Optimization of 3D-Printed Material Architectures:
    Testing Toolpath Consideration in Design
  11. Murtaza Ghulam, Baldinelli Giorgio (2025-08)
    Revolutionizing Architecture:
    3D Printing in Large Construction Industry and Strategic Innovations for Enhanced Performance
  12. Li Shiping, Sun Yan, Qian Ye, Chen Wujun et al. (2025-08)
    Bio-Inspired Bouligand Architectures for Enhanced Flexural Performance in 3D-Printed Strain-Hardening Cementitious Composites (3DP-SHCC)
  13. İlerisoy Zeynep, Takva Çağatay, Top Semahat, Gökgöz Berru et al. (2025-08)
    The Effectiveness of 3D Concrete Printing Technology in Architectural Design:
    Different Corner-Wall Combinations in 3D Printed Elements and Geometric Form Configurations in Residential Buildings
  14. Xia Kailun, Chen Yuning, Chen Yu, Jia Lutao et al. (2025-04)
    Programmable Toughening for 3D Printed Concrete and Architected Cementitious Materials
  15. Calmanovici Miran, Livne Achiya, Barath Shany (2025-03)
    From Waste to Resource:
    A Design to Fabrication Approach Integrating Recycled Wood-Mycelium Mixtures for 3D Printing in Architecture
  16. Meyuhas Ohad, Larianovsky Pavel, Bentur Arnon, Magdassi Shlomo et al. (2025-03)
    Methods for Earth-Based Falsework in Multi-Material Additive Manufacturing at an Architectural Scale
  17. Zhou Wen, Xu Yading, Meng Zhaozheng, Xie Jinbao et al. (2025-03)
    Filament Stitching:
    An Architected Printing Strategy to Mitigate Anisotropy in 3D-Printed Engineered Cementitious Composites
  18. Yabanigül Meryem, Özer Derya (2024-12)
    Exploring Architectural Units Through Robotic 3D Concrete Printing of Space-Filling Geometries
  19. Kosson Michael, Brown Lesa, Thorne Garret, Sanchez Florence (2024-11)
    Influence of Internal Architecture and Ink Formulation on the Thermal Behavior of 3D Printed Cementitious Materials
  20. Heinze Lisa, Liebringshausen Anne, Eversmann Philipp (2024-11)
    3D Printing with Wood Waste:
    Development of Reusable Printing Material Based on Waste Wood Particles and Its Digital Manufacturing Process for Wall Constructions in Architecture
  21. Costalonga Vanessa, Dahy Hanaa (2024-11)
    From Filament to Structure:
    3D Printing of Natural Fiber Filaments for Architecture
  22. Demont Léo, Bono Victor, Ducoulombier Nicolas, Mesnil Romain et al. (2024-11)
    Anisotropic Concrete:
    A Composite Look on the Engineering and Architecture of Concrete Construction
  23. Teng Teng, Zhi Yefan, Akbarzadeh Masoud (2024-11)
    Gradient Multimaterial Printing:
    Integrated and Tailored Thermal Insulation Through Gradient Multimaterial Additive Manufacturing for Masonry Architectural Components
  24. Abdelmohsen Sherif, Massoud Passant (2024-11)
    Synthetic Fabrications:
    Lessons from Integrating Robotic Clay-Fabrication in Architectural Education
  25. Cabay Edouard, Ayoub Sara (2024-11)
    Earth Architecture:
    Integtrating Tradition for 3D Printing Solutions
  26. Takva Çağatay, Top Semahat, Gökgöz Berru, Gebel Şeyma et al. (2024-11)
    Applicability of 3D Concrete Printing Technology in Building Construction with Different Architectural Design Decisions in Housing
  27. Nashed Kabalan Ola, Ciblac Thierry, Marceau Sandrine, Roy Robert (2024-11)
    Advancing Raw Earth Reinforcement for 3D Printed Architecture:
    Durability-Assessment
  28. Madrid Javier, Ortega Guillermo, Olsson Nils, Tenorio Ríos José (2024-10)
    3D Constructing:
    Exploring the Potential of 3D Concrete and Clay Printing with Generative Design for Architectural Innovation
  29. Dounas Theodoros, Berdos Yorgos, Vele Jiří (2024-09)
    Towards a Decentralized Physical Infrastructure for Additive Manufacturing in Architecture:
    A Proof of Concept for a Tamper Proof, Secure Connection Between Designs, Blockchains and 3D Printers
  30. Asaf Ofer, Larianovsky Pavel, Bentur Arnon, Sprecher Aaron (2024-09)
    Transforming Earths:
    Designing 3D Printable Materials for Robotic Earth Architecture
  31. Valera Hugo, Pimentel Tinoco Matheus, Mendoza Reales Oscar, Toledo Filho Romildo et al. (2024-09)
    Rheological and 3D Printing-Assessment of Sisal-Fiber Mortar for Architectural Applications
  32. Nana W., Dell’Endice Alessandro, Bhooshan Vishu, Zhou Fulei et al. (2024-09)
    Decarbonizing Concrete Construction:
    Case of the Phoenix 3D Printed Footbridge and Learnings for Engineering and Architecture
  33. Márquez Álvaro, Ramallo Laura, Varela Hugo, Barluenga Gonzalo et al. (2024-09)
    3D Printing Architectural Applications of Cement-Lime Mortars with Microencapsulated Phase-Change-Material
  34. Zhou Wen, Xu Yading, Šavija Branko, McGee Wesley et al. (2024-09)
    Stitching Engineered Cementitious Composites (ECC ):
    Unraveling Anisotropy Challenges Through Architectured 3D Printing Path Design
  35. Anton Ana-Maria, Dillenburger Benjamin (2024-09)
    Towards a Sustainable 3D‐Concrete‐Printed Architecture:
    Assemblies, Detailing and Ornamentation
  36. Prihar Arjun, Gupta Shashank, Esmaeeli Hadi, Moini Mohamadreza (2024-08)
    Tough Double-Bouligand Architected Concrete Enabled by Robotic Additive Manufacturing
  37. Moini Mohamadreza, Rodriguez Fabian, Olek Jan, Youngblood Jeffrey et al. (2024-07)
    Mechanical Properties and Fracture Phenomena in 3D Printed Helical Cementitious Architected Materials Under Compression
  38. Sadakorn Wannapol, Prasertsuk Santirak, Prasittisopin Lapyote (2024-06)
    Improving the Structural Efficiency of Textured Three-Dimensional Concrete Printing Wall by Architectural Design
  39. Los Angeles Ortega Rosario Maria, Medina Melany, Duque Rafael, Alberto Jaén Ortega Antonio et al. (2024-05)
    Advancing Sustainable Construction:
    Insights into Clay-Based Additive Manufacturing for Architecture, Engineering, and Construction
  40. Ralston Nadia, Gupta Shashank, Moini Mohamadreza (2024-05)
    3D Printing of Architected Calcium-Silicate Binders with Enhanced and In-Situ Carbonation
  41. Dubor Alexandre, Cabay Edouard, Tayoun Yara, Carrasco Oriol et al. (2024-04)
    3D Printed Earth Architecture:
    Design Approach for a Performative Habitat
  42. Rojas Jorge, Hasanzadeh Sognad (2024-03)
    Novel Digital Twin Architecture for 3D Concrete Printing in the AEC Industry
  43. Prihar Arjun, Garlock Maria, Najmeddine Aimane, Moini Mohamadreza (2024-01)
    Mechanical Performance of Sinusoidally Architected Concrete Enabled by Robotic Additive Manufacturing
  44. Moini Mohamadreza (2024-01)
    Perspectives in Architected Infrastructure Materials
  45. Schwartz Thibault (2023-12)
    HAL Robotics:
    From Automated Architectural Design for Fabrication, to Architecting Automated Manufacturing Systems
  46. Nóbrega Thiers, Henriques Gonçalo, Passaro Andres (2023-12)
    3D Printing for Architecture:
    Organic Integration of Algorithm, Machine and Material-Paste-Manufacture
  47. Pazols Maximiliano, Raspall Félix (2023-12)
    Terra Fibrosum:
    Continuous Fibers Reinforcement System for Robotized 3D Printing with Earth for Architecture
  48. Dimitriou Savvas, Kontovourkis Odysseas (2023-11)
    Force-Flow Based 3D Printing of Structural Elements Inspired by the Traditional Architecture of Cross-Vaults
  49. Imagawa Koichi, Ohno Motohiro, Ishida Tetsuya (2023-11)
    An Experimental Study on Energy-Absorption-Capability of Cast and 3D Printed Architected Cement-Based Materials
  50. Eversmann Philipp, Rossi Andrea (2023-11)
    Towards Construction 4.0:
    Computational Circular Design and Additive Manufacturing for Architecture Through Robotic Fabrication with Sustainable Materials and Open-Source Tools
  51. Parisi Nicola (2023-10)
    New Directions of 3D Printed Earth Architecture
  52. Asaf Ofer, Bentur Arnon, Larianovsky Pavel, Sprecher Aaron (2023-10)
    From Soil to Printed Structures:
    A Systematic Approach to Designing Clay-Based Materials for 3D Printing in Construction and Architecture
  53. Wang Shih-Yuan, Liong Sze-Teng, Gan Y., Sheng Yu-Ting (2023-10)
    Cost-Effective Concrete Fabrication for Large Irregularly Shaped Architectural Structures
  54. Živković Milijana, Žujović Maša, Milošević Jelena (2023-09)
    Architectural 3D Printed Structures Created Using Artificial Intelligence:
    A Review of Techniques and Applications
  55. Cabibihan John-John, Gaballa Aya, Fadli Fodil, Irshidat Mohammad et al. (2023-06)
    A Guided Approach for Utilizing Concrete Robotic 3D Printing for the Architecture, Engineering, and Construction Industry
  56. Prasad Kudrekodlu, Vasugi V., Senthil Kumaran G. (2023-02)
    Application of 3D Printing Concepts in the Architecture Engineering and Construction Industry:
    A Scientometric Review
  57. Matos Ana, Emiroğlu Mehmet, Subaşı Serkan, Maraşlı Muhammed et al. (2023-01)
    Architectonic Cement-Based Composites 3D Printing
  58. Teixeira João, Zuazua-Ros Amaia, Jesus Manuel, Rangel Bárbara et al. (2023-01)
    How 3DPC Will Transform Architectural Design
  59. Patterson Albert, Vajipeyajula Bhaskar, Norris William (2022-10)
    System Architecture and Design Parameters for Extrusion-Based Autonomous Construction Systems
  60. Jenny Ercan, Mitterberger Daniela, Lloret-Fritschi Ena, Vasey Lauren et al. (2022-09)
    Robotic On-Site Adaptive Thin-Layer Printing:
    Challenges and Workflow for Design and Fabrication of Bespoke Cementitious Plasterwork at Full-Architectural-Scale
  61. Žujović Maša, Obradović Radojko, Rakonjac Ivana, Milošević Jelena (2022-08)
    3D Printing Technologies in Architectural Design and Construction:
    A Systematic Literature Review
  62. Pain Suzi, Choo Ee, Bartov Nitsan, Young Jack (2022-07)
    How to Dress a Column:
    An Architect's Method for Designing with 3D Printed Clay
  63. Breseghello Luca, Naboni Roberto (2022-05)
    Tool-Path -Based Design for 3D Concrete Printing of Carbon-Efficient Architectural Structures
  64. Pajonk Adam, Prieto Alejandro, Blum Ulrich, Knaack Ulrich (2021-11)
    Multi-Material Additive Manufacturing in Architecture and Construction:
    A Review
  65. Becker Mirco (2021-11)
    Felt-Concrete Composites in Architecture and Design
  66. Troemner Matthew, Ramyar Elham, Meehan Jonathan, Johnson Benton et al. (2021-09)
    A 3D Printing-Centered Approach to Mars-Habitat Architecture and Fabrication
  67. Graziano Angelo, Cavaliere Ilaria, Costantino Dario, Fallacara Giuseppe et al. (2021-09)
    Additive Manufacturing in Architecture:
    3D Printing Solutions for Vaulted Spaces
  68. Gülle Nur, Selçuk Semra (2021-08)
    A Bibliometric Analysis on 3D Printed Concrete in Architecture
  69. Ko Chien-Ho (2021-06)
    Constraints and Limitations of Concrete 3D Printing in Architecture
  70. García-Alvarado Rodrigo, Moroni-Orellana Ginnia, Banda-Pérez Pablo (2021-06)
    Architectural Evaluation of 3D Printed Buildings
  71. Li Chenshu, Zhou Xiaoyan, Liu Xingyu (2021-04)
    Integrating the Bio-Digital Aesthetic Value and Architecture Potential of Rapid-Liquid-Printed-Concrete 3D Printing Technology
  72. Cohen Zach (2021-03)
    Recasting Concrete:
    A Case Study in Concrete 3D Printing as an Architectural Pedagogy
  73. Muñiz Manuel, Chantin Marjorie, Vintila Cristian, Fabritius Marc et al. (2021-02)
    Concrete Hybrid Manufacturing:
    A Machine Architecture
  74. Graser Konrad, Baur Marco, Apolinarska Aleksandra, Dörfler Kathrin et al. (2020-09)
    DFAB House:
    A Comprehensive Demonstrator of Digital Fabrication in Architecture
  75. Nicholas Paul, Rossi Gabriella, Williams Ella, Bennett Michael et al. (2020-08)
    Integrating Real-Time Multi-Resolution Scanning and Machine Learning for Conformal Robotic 3D Printing in Architecture
  76. Valente Marco, Sambucci Matteo, Sibai Abbas, Musacchi Ettore (2020-07)
    Multi-Physics Analysis for Rubber-Cement Applications in Building and Architectural Fields:
    A Preliminary Analysis
  77. Bekkering Juliette, Kuit Barbara, Biffi Alessia, Ahmed Zeeshan (2020-07)
    Architectonic Explorations of the Possibilities of 3D Concrete Printing:
    The Historic Building Fragment as Inspiration for New Applications with 3D Concrete Printing in Architecture
  78. Grasser Georg, Pammer Lorenz, Köll Harald, Werner E. et al. (2020-07)
    Complex Architecture in Printed Concrete:
    The Case of the Innsbruck University 350th Anniversary Pavilion COHESION
  79. Pfeiffer Sven, Dorn Tobias, Hirsch Tamino, Ehm Clemens et al. (2020-07)
    Architectural Applications and Workflows for Additive Fabrication with Concrete
  80. Hack Norman, Dörfler Kathrin, Walzer Alexander, Wangler Timothy et al. (2020-03)
    Structural Stay-in-Place Formwork for Robotic In-Situ Fabrication of Non-Standard Concrete Structures:
    A Real-Scale Architectural Demonstrator
  81. Khalil Abdullah, Wang Xiangyu, Celik Kemal (2020-02)
    3D Printable Magnesium Oxide Concrete:
    Towards Sustainable Modern Architecture
  82. Lakhal Othman, Chettibi Taha, Belarouci Abdelkader, Dherbomez Gerald et al. (2020-02)
    Robotized Additive Manufacturing of Funicular Architectural Geometries Based on Building Materials
  83. Nazarian Shadi, Duarte José, Bilén Sven, Memari Ali et al. (2019-11)
    Additive Manufacturing of Architectural Structures:
    An Interplay Between Materials, Systems, and Design
  84. Szabó Anna, Reiter Lex, Lloret-Fritschi Ena, Gramazio Fabio et al. (2019-09)
    Processing of Set-on-Demand Solutions for Digital Fabrication in Architecture
  85. Mostafavi Sina, Kemper Benjamin, Du Chong (2019-08)
    Materializing Hybridity in Architecture:
    Design to Robotic Production of Multi-Materiality in Multiple Scales
  86. Bard Joshua, Cupkova Dana, Washburn Newell, Zeglin Garth (2018-12)
    Robotic Concrete Surface Finishing:
    A Moldless Approach to Creating Thermally Tuned Surface Geometry for Architectural Building Components Using Profile 3D Printing
  87. Cohen Zach (2018-09)
    Hold Up:
    Machine Delay in Architectural Design
  88. Moini Mohamadreza, Olek Jan, Magee Bryan, Zavattieri Pablo et al. (2018-09)
    Additive Manufacturing and Characterization of Architectured Cement-Based Materials via X-Ray Micro-Computed Tomography
  89. Moini Mohamadreza, Olek Jan, Youngblood Jeffrey, Magee Bryan et al. (2018-08)
    Additive Manufacturing and Performance of Architectured Cement-Based Materials
  90. Buchli Jonas, Giftthaler Markus, Kumar Nitish, Lussi Manuel et al. (2018-07)
    Digital In-Situ Fabrication:
    Challenges and Opportunities for Robotic In-Situ Fabrication in Architecture, Construction, and Beyond
  91. Marijnissen Marjolein, Zee Aant (2017-09)
    3D Concrete Printing in Architecture:
    A Research on the Potential Benefits of 3D Concrete Printing in Architecture
  92. Keating Steven, Leland Julian, Cai Levi, Oxman Neri (2017-04)
    Toward Site-Specific and Self-Sufficient Robotic Fabrication on Architectural-Scales
  93. Pawar Vijay, Stuart-Smith Robert, Scully Peter (2017-04)
    Toward Autonomous Architecture:
    The Convergence of Digital Design, Robotics, and the Built Environment
  94. Aejmelaeus-Lindström Johan, Willmann Jan, Tibbits Skylar, Gramazio Fabio et al. (2016-04)
    Jammed Architectural Structures:
    Towards Large-Scale Reversible Construction
  95. Agustí-Juan Isolda, Habert Guillaume (2016-04)
    An Environmental Perspective on Digital Fabrication in Architecture and Construction
  96. Gosselin Clément, Duballet Romain, Roux Philippe, Gaudillière-Jami Nadja et al. (2016-03)
    Large-Scale 3D Printing of Ultra-High-Performance Concrete:
    A New Processing Route for Architects and Builders
  97. Martins Pedro, Sousa José (2014-09)
    Digital Fabrication Technology in Concrete Architecture
  98. Braumann Johannes, Brell-Cokcan Sigrid (2012-12)
    Digital and Physical Tools for Industrial Robots in Architecture:
    Robotic Interaction and Interfaces
  99. Thangavelu Madhu, Khoshnevis Behrokh, Carlson Anders, Leach Neil (2012-09)
    Architectural Concepts Employing Co-Robot-Strategy and Contour Crafting Technologies for Lunar Settlement Infrastructure Development