Skip to content

#incorporation

Keywords by Co - Occurrence

  1. Yuan Pu, Wang Xinjie, Huang Jie, Shi Quanbin et al. (2026-04)
    Feasibility, Mechanical Properties, and Environmental Impact of 3D-Printed Mortar Incorporating Recycled Fine Aggregates from Decoration and Renovation Waste
  2. Yang Xia, Wang Jiuyuan, Zhang Zhenming, Tan Yushuang et al. (2026-04)
    A Comparative Analysis of 3D-Printed Concrete Incorporating Fibers and Fiber Grids:
    Mechanical Properties and Microstructure
  3. Manivannan T., Reddy K., Jaganathan Jayaprakash (2026-04)
    Numerical Analysis of Flexural Behaviour in 3D-Printed Snap-Fit Interlocking Concrete Specimens Incorporating Frictional Interactions
  4. Huang Kaisheng, Elchalakani Mohamed, Ran Hongyu, Ayough Pouria et al. (2026-03)
    Improvement of the Self-Sensing Properties of the 3D Printing UHPC Incorporating Conductive Rubber
  5. Kolářová Mária, Kloužková Alexandra, Lauermannová Anna-Marie, Záleská Martina et al. (2026-03)
    Incorporation of Waste Glass Dust with Pigments Containing Cd, S, and Se into Magnesium Oxychloride Cement for Sustainable Production Using 3D Printing
  6. Peng Yiming, Unluer Cise (2026-02)
    Thixotropic and Mechanical Behavior of MgO-SiO2 Pastes Incorporating Rice Husk Ash for Extrusion‐Based 3D Printing
  7. Yuan Yong, Zia Syed, Sheikh Taimur, Irfan ul Hassan Muhammad et al. (2026-02)
    Enhancing Interlayer Bond Strength of 3D-Printed Concrete Through Microstructural Densification by Means of Incorporating Sugarcane Bagasse Ash
  8. Hasan Kamrul, Alias Aizat, Hasan Mehedi, Yahaya Fadzil et al. (2026-02)
    Designing 3D-Printed Concrete with Ternary Blended Mortars Incorporating Fly Ash and Silica Fume:
    Effects of Low Water-Binder Ratios on Workability and Strength
  9. Qureshi Mohsin, Shizawi Amira, Kindi Ghassan, Sawafi Bushra et al. (2026-01)
    Development of Cementitious Material by Incorporating Fine Waste Materials for Testing in Newly Developed Portable Concrete 3D Printer
  10. Aabbas Mohamed, Mahdaoui Mustapha, Bouchikhi Abdelhadi, Ahachad Mohammed et al. (2026-01)
    Experimental and Numerical Study of the Incorporation of Spent Coffee Grounds and Phase Change Materials in Hollow Bricks Manufactured by 3D Printing
  11. Mim Nusrat, Hosan Anwar, Shaikh Faiz, Sarker Prabir (2026-01)
    Mechanical Anisotropy and Microstructural Investigation of Copper Heap Leach Residue Incorporated 3D Printed Concrete
  12. Chen Guixiang, Zhang Xuanzheng, Wang Jun, Hu Kui et al. (2026-01)
    Anisotropy and Mechanical Enhancement of 3D-Printed Vitrified Microsphere Thermal Insulation Mortar Incorporating Basalt Fiber Under Different Printing Paths
  13. Ding Tao, Lian Hongqian (2026-01)
    Buildability Analysis of 3D Concrete Printing:
    A Finite Element Model Incorporating Segment-by-Segment Activation, Nozzle Constraint, and Extrusion Pressure
  14. Costa Gabriel, Maas Pyetra, Doerner Gabriel, Nazário Samara et al. (2026-01)
    Reducing the Cement Content in 3D Concrete Printing Mixtures Through Porcelain Polishing Residue Incorporation
  15. Talukdar A., Belek Fialho Teixeira Müge, Fawzia Sabrina, Zahra Tatheer et al. (2026-01)
    Investigation on the Fresh and Mechanical Properties of Low Carbon 3D Printed Concrete Incorporating Sugarcane Bagasse Ash and Microfibers
  16. Cárdenas Valeria, Parmigiani Silvia, Vargas Juan, Restuccia Luciana et al. (2026-01)
    Incorporation of Vitrified Ashes in Lightweight Foamed Concrete for 3D Printing:
    Thermal and Mechanical Assessment
  17. Melero-Tur Sofía, Jiménez-Guerrero Adriano, Pérez-Fenoy José, Barbero-Barrera María (2026-01)
    Re-Imagining the Production of 3D Printed Ceramics Through the Incorporation of Waste Materials
  18. Aabbas Mohamed, Mazian Brahim, Ahachad Mohammed, Zoghlami Aya et al. (2025-12)
    Sustainable 3D Printed Clay Bricks Incorporating Coffee Waste:
    Toward Circular Economy in Construction
  19. Ferrari Lucia, Rizzieri Giacomo, Ferrara Liberato, Franzoni Elisa (2025-12)
    Rheological Control of Cementitious Composites Incorporating Ceramic Wastes for 3D Printing Applications
  20. Tinoco Matheus, Lima Moura Paiva Rayane, Andrade Luiza, Mendoza Reales Oscar (2025-12)
    Hybrid 3D Printable Mixtures Incorporating Fine Earth, Portland Cement, and Fly Ash:
    A Sustainable Alternative to Cement-Intensive Systems
  21. Wen Kuo-Wei, Su Yen-Fang, Mo Kim, Hung Chung-Chan (2025-12)
    Time-Dependent Rheology, Green Strength, and Buildability of 3D-Printed Ultra-High Performance Concrete Incorporating Various Fiber Types and Contents
  22. Cheng Zhangqi, Li Keyan, Liu Renlong (2025-12)
    Sustainable 3D Printed Engineered Cementitious Composites Incorporating Recycled Ceramic Materials:
    Rheology and Mechanical Behavior
  23. Öztürk Ece, Ince Ceren, Borgianni Yuri, Nicolaides Demetris et al. (2025-12)
    Printability, Engineering Properties and Environmental Implications of 3D-Printed Cementitious Mortars Incorporating Hydrated Lime, Tile Powder and Accelerator
  24. Cai Xianhuan, Chen Fan, Zhao Zhihui, Xiao Peng et al. (2025-12)
    Impact of Early Particle Characteristics on Rheology and Buildability in 3D-Printed Magnesium Silicon Potassium Phosphate Cement Incorporating Fly Ash
  25. Raza Ali, Tan Binglin, Jiajia Zhou, Umar Muhammad et al. (2025-11)
    Evaluation of Mechanical and Microstructural Properties of Sustainable 3D-Printed Engineered Cementitious Composites Incorporating Hybrid PE/PVA Fibers and Yellow River Sand
  26. Liu Xianda, Sun Junbo, Chen Hui, Liu Chang et al. (2025-11)
    3D Printed Concrete with Red Mud Incorporation:
    Influence of Red Mud Manufacturing Procedures on Mechanical Properties at Elevated Temperatures
  27. Oh Sangwoo, Lee Jinsuk, Oh Gyujong, Choi Seongcheol (2025-11)
    Effects of the Combined Incorporation of Superabsorbent Polymers and Polyvinyl Alcohol Fibers on Material Properties of 3D Printable Mortar:
    Rheology, Shrinkage, and Mechanical Behavior
  28. Baah Thomas, Kim Heejeong, Latypov Marat (2025-11)
    Multi-Objective Adaptive Experimental Approach for Optimizing 3D Concrete Printing Mixtures and Parameters Incorporating Construction and Demolition Waste for Sustainable Construction
  29. Zhang Jiao-Long, Yuan Yong, Fatoyinbo Imoleayo, Zhou Lujie et al. (2025-11)
    3D-Printable Mortars Incorporating Municipal Solid Waste Incineration Bottom Ash:
    Linking Hydration to Extrudability and Mechanical Performance
  30. Zhu Xiaowei, Zhang Xudong, Zhang Jicheng, Chen Miao et al. (2025-11)
    Study on Anisotropic Thermal and Mechanical Properties of 3D-Printed Scrap-Aerogel-Incorporated Concrete
  31. Nair Sajitha, Nagarajan Praveen, Thampi Santosh, Das Sudha et al. (2025-10)
    Life Cycle-Based Sustainability Assessment of Optimized 3D Printable Concrete Mixes Incorporating Scms and Recycled Aggregates
  32. Bianco Nicola, Fragnito Andrea, Iasiello Marcello, Mauro Gerardo et al. (2025-10)
    Numerical Analysis of a 3D Printed Concrete Envelope Incorporating PCM Nanoparticles
  33. Das Jyotish, Pratama M., Nematollahi Behzad, Guadagnini Maurizio (2025-10)
    Durability Performance of 3D-Printed Ultra-High Strength Concrete Incorporating Corrosion Inhibitor
  34. Li Zhengrong, Xing Wenjing, Sun Jingting (2025-09)
    Heat Transfer Calculation and Correction for 3D Printed Walls Incorporating Surface Geometry Effects
  35. Rahman S., Khair Sanjida, Shaikh Faiz, Sarker Prabir (2025-09)
    Decarbonized 3D Printed Concrete Incorporating Lithium Slag and PVA Fiber:
    Buildability, Mechanical, and Microstructural Insights
  36. Vico Lujano Raúl, Pérez Villarejo Luis, Novais Rui, Hidalgo-Torrano Pilar et al. (2025-07)
    Optimized Mortar Formulations for 3D Printing:
    A Rheological Study of Cementitious Pastes Incorporating Potassium-Rich Biomass Fly Ash Wastes
  37. Ravichandran Darssni, Prem Prabhat, Bhaskara Gollapalli, Maheswaran Srinivasan et al. (2025-07)
    Time-Dependent Properties of 3D Printable Plain and Fibered High Strength Concrete Incorporating Copper Slag as an Alternate Fine Aggregate
  38. Kaur Zinnia, Goyal Shweta, Kwatra Naveen, Bera Tarun (2025-07)
    Pore Structure Analysis and Durability Performance of Sustainable 3D Printed Concrete Incorporating Fly Ash and Limestone Calcined Clay Based Binders
  39. Sbardelotto Eduardo, Vieira Manuel, Ferreira dos Santos Karyne, Pereira dos Santos Samuel et al. (2025-06)
    Exploratory Study on the Rheological Behaviour of 3D Printable Mortars Incorporating Fine Recycled Concrete Aggregates (FRCA)
  40. Santhosh S., Raphael Benny, Santhanam Manu (2025-05)
    Concrete 3D Printing of Shape-Optimized Lattice Beams Incorporating Nature-Inspired Patterns
  41. Jia Lutao, Dong Enlai, Xia Kailun, Niu Geng et al. (2025-04)
    Initial Plastic Shrinkage of 3D-Printed Concrete Incorporating Recycled Brick Fine Aggregates:
    Insights from Water Transport and Structural Evolution
  42. Mim Nusrat, Shaikh Faiz, Sarker Prabir (2025-03)
    Sustainable 3D Printed Concrete Incorporating Alternative Fine Aggregates:
    A Review
  43. Chen Wei, Pan Jinlong, Zhu Binrong, Han Jinsheng et al. (2025-03)
    Nonlinear Predictive Modeling of Building Rates Incorporating Filament Compression Deformations in 3D Printed Geopolymer Concrete
  44. Nasr Ahmed, Duan Zhenhua, Singh Amardeep, Deng Qi et al. (2025-02)
    Fresh Properties and Rheological Behavior of 3D-Printed Cementitious Composites Incorporating Recycled PVC and Nylon Fibers:
    An Experimental Approach
  45. Salaimanimagudam M., Jayaprakash Jaganathan, Anwar Mohammed (2025-02)
    Selection of Reinforcement Incorporation Method for 3D Printed Concrete Using MCDM
  46. Bayat Hamid, Karimpouli Sagegh, Yang Liming, Ramandi Hamed et al. (2025-02)
    Investigation of Interlayer Bonding and Pore Characteristics in 3D-Printed High-Strength Mortar Incorporating Recycled Lightweight Aggregates
  47. Mengistu Girum, Nemes Rita (2025-02)
    Evaluating the Performance of Recycled Aggregate Concrete Incorporating 3D-Printed Concrete Waste as Aggregate Using the Rebound Hammer Test
  48. Vargas Armando, Robayo-Salazar Rafael, Gutiérrez Ruby (2024-12)
    Effects of Incorporating Fine Aggregates and Polypropylene-Micro-Fibers on the Cracking-Control of 3D Printed Cementitious Mixtures
  49. Zhao Hongyu, Wang Yufei, Liu Xianda, Wang Xiangyu et al. (2024-12)
    Review on Solid Wastes Incorporated Cementitious Material Using 3D Concrete Printing Technology:
    Corrigendum
  50. Soave Francesco, Muciaccia Giovanni, Ferrara Liberato (2024-11)
    An Indirect Methodology to Evaluate the Rheological Properties of a Digitally Fabricated Concrete Incorporating Corrosion Inhibitors
  51. Vlieger Jentel, Cizer Özlem, Lesage Karel, Desplentere Frederik et al. (2024-11)
    Rheological- and Pumpability-Analysis of Sustainable 3D Printing Mortars Incorporating Recycled Sand
  52. Federowicz Karol, Cendrowski Krzysztof, Sikora Paweł (2024-10)
    Low-Carbon Cementitious Composite Incorporated with Biochar and Recycled Fines Suitable for 3D Printing Applications:
    Hydration, Shrinkage and Early-Age Performance
  53. Sun Junbo, Zhang Yanling, Wu Qi, Wang Yufei et al. (2024-10)
    3D Printed Concrete Incorporating Waste-Rubber:
    Anisotropic Properties and Environmental Impact-Analysis
  54. Zhao Zhihui, Liu Minghao, Kang Aihong, Cai Xianhuan et al. (2024-08)
    Rheology and Buildability of Sustainable 3D Printed Magnesium-Potassium-Phosphate-Cement Composites Incorporating MgO-SiO2-K2HPO4
  55. Zhao Hongyu, Wang Yufei, Liu Xianda, Wang Xiangyu et al. (2024-08)
    Review on Solid Wastes Incorporated Cementitious Material Using 3D Concrete Printing-Technology
  56. Robayo-Salazar Rafael, Muñoz Miguel, Vargas Armando, Gutiérrez Ruby (2024-08)
    Effects of Incorporating Bentonite, Metakaolin, Microsilica, and Calcium-Carbonate on the Rheological Properties of Portland-Cement-Based 3D Printing Inks
  57. Jia Lutao, Niu Geng, Dong Enlai, Jiang Yifan et al. (2024-08)
    Optimization-Strategy for Incorporating Recycled Brick-Powder in 3D Printed Concrete by Balancing Low-Carbon Footprint and Enhanced Performance
  58. Yuan Shuaihua, Duan Dengke, Sun Junbo, Yu Yi et al. (2024-08)
    Mechanical, Alkali Excitation, Hydrothermal Enhancement of 3D Printed Concrete Incorporated with Antimony-Tailings
  59. Lyu Xin, Elchalakani Mohamed, Wang Xiangyu, Sun Junbo et al. (2024-07)
    Mechanical Performance and Anisotropic Analysis of Rubberised 3D Printed Concrete Incorporating PP-Fiber
  60. An Dong, Zhang Yixia, Yang Chunhui (2024-05)
    Incorporating Coarse Aggregates into 3D Concrete Printing from Mixture Design and Process-Control to Structural Behavior and Practical Applications:
    A Review
  61. Jia Zijian, Kong Lingyu, Jia Lutao, Ma Lei et al. (2024-04)
    Printability and Mechanical Properties of 3D Printing Ultra-High-Performance Concrete Incorporating Limestone-Powder
  62. Babafemi Adewumi, Norval Chris, Kolawole John, Paul Suvash et al. (2024-04)
    3D Printed Limestone-Calcined-Clay-Cement Concrete Incorporating Recycled Plastic-Waste:
    RESIN8
  63. Lu Yue, Xiao Jianzhuang, Li Yan (2024-03)
    3D Printing Recycled Concrete Incorporating Plant-Fibers:
    A Comprehensive Review
  64. Hall Alice, Herbert Roger, Stafford Richard, Jones G. et al. (2024-03)
    3D Printed Habitat Enhancement Units:
    Key Features to Incorporate within Multifunctional Infrastructure
  65. Ahi Oğulcan, Ertunç Özgür, Bundur Zeynep, Bebek Özkan (2024-02)
    Automated Flow-Rate-Control of Extrusion for 3D Concrete Printing Incorporating Rheological Parameters
  66. Saadati Farzaneh, Kani Ebrahim (2023-09)
    Phosphorous Slag-Based Geopolymer Cement Incorporate with Mullite for 3D Printing Application
  67. Sukontasukkul Piti, Khomkum Sila, Maho Buchit, Fujikake Kazunori (2023-09)
    Printability and Shape Stability of Cement Mortar Incorporating Low Volume of Micro-Polypropylene Fiber for 3D Printing Application
  68. Salah Husam, Mutalib Azrul, Kaish Amrul, Syamsir Agusril et al. (2023-07)
    Development of Ultra-High-Performance Silica-Fume-Based Mortar Incorporating Graphene-Nano-Platelets for 3D Concrete Printing Application
  69. Rahemipoor Sahand, Hasany Masoud, Mehrali Mohammad, Almdal Kristoffer et al. (2023-07)
    Phase-Change-Materials Incorporation into 3D Printed Geopolymer Cement:
    A Sustainable Approach to Enhance the Comfort and Energy Efficiency of Buildings
  70. Joshi Arpan, Carvalho Tomás, Gaspar Florindo (2023-04)
    Incorporation of Forest Biomass-Based Fly-Ash in Cement for 3D Printing
  71. Bai Meiyan, Wu Yuching, Xiao Jianzhuang, Ding Tao et al. (2023-04)
    Workability and Hardened Properties of 3D Printed Engineered Cementitious Composites Incorporating Recycled Sand and PE-Fibers
  72. Sambucci Matteo, Biblioteca Ilario, Valente Marco (2023-01)
    Life Cycle Assessment (LCA) of 3D Concrete Printing and Casting Processes for Cementitious Materials Incorporating Ground Waste Tire Rubber
  73. Dulaj Albanela, Suijs Monica, Salet Theo, Lucas Sandra (2022-06)
    Incorporation and Characterization of Multi-Walled Carbon Nanotube Concrete Composites for 3D Printing Applications
  74. Christen Heidi, Zijl Gideon, Villiers Wibke (2022-05)
    The Incorporation of Recycled Brick-Aggregate in 3D Printed Concrete
  75. Bong Shin, Nematollahi Behzad, Xia Ming, Ghaffar Seyed et al. (2022-04)
    Properties of Additively Manufactured Geopolymer Incorporating Mineral-Wollastonite-Micro-Fibers
  76. Brooks Adam, He Yawen, Farzadnia Nima, Seyfimakrani Shayan et al. (2022-03)
    Incorporating PCM-Enabled Thermal Energy Storage into 3D Printable Cementitious Composites
  77. Ma Guowei, A Ruhan, Xie Panpan, Pan Zhu et al. (2022-01)
    3D Printable Aerogel-Incorporated Concrete:
    Anisotropy Influence on Physical, Mechanical, and Thermal Insulation Properties
  78. Wu Zixia, Xu Yading, Šavija Branko (2021-12)
    Mechanical Properties of Lightweight Cementitious Cellular Composites Incorporating Micro-Encapsulated Phase-Change-Material
  79. Putten Jolien, Rahul Attupurathu, Schutter Geert, Tittelboom Kim (2021-08)
    Development of 3D Printable Cementitious Composites with the Incorporation of Polypropylene Fibers
  80. Cuevas Villalobos Karla, Chougan Mehdi, Martin Falk, Ghaffar Seyed et al. (2021-05)
    3D Printable Lightweight Cementitious Composites with Incorporated Waste-Glass-Aggregates and Expanded Microspheres:
    Rheological, Thermal and Mechanical Properties
  81. Chougan Mehdi, Ghaffar Seyed, Sikora Paweł, Chung Sang-Yeop et al. (2021-02)
    Investigation of Additive Incorporation on Rheological, Microstructural and Mechanical Properties of 3D Printable Alkali-Activated Materials
  82. Chu Shaohua, Li Leo, Kwan Albert (2020-09)
    Development of Extrudable High-Strength Fiber-Reinforced Concrete Incorporating Nano-Calcium-Carbonate
  83. Cho Seung, Kruger Jacques, Rooyen Algurnon, Zeranka Stephan et al. (2019-09)
    Rheology of 3D Printable Lightweight Foam-Concrete Incorporating Nano-Silica
  84. Cho Seung, Kruger Jacques, Zeranka Stephan, Rooyen Algurnon et al. (2019-06)
    Mechanical Evaluation of 3D Printable Nano-Silica Incorporated Fiber-Reinforced Lightweight Foam-Concrete
  85. Nerella Venkatesh, Ogura Hiroki, Mechtcherine Viktor (2018-07)
    Incorporating Reinforcement into Digital Concrete Construction
  86. Mechtcherine Viktor, Nerella Venkatesh (2018-04)
    Incorporating Reinforcement in 3D-Printing with Concrete