Skip to content

#dynamic

Keywords by Co - Occurrence

  1. Alvarez Eduardo, Curth Alexander, Mueller Caitlin, Norford Leslie (2026-01)
    Enhancing the Dynamic Thermal Performance of Wall Components Through Shape Optimization:
    Method and Application to Extruded Blocks and 3D-Printed Walls
  2. Ferrara Liberato, Rizzieri Giacomo, Cremonesi Massimiliano (2025-12)
    A Particle Fluid Dynamics Modelling Approach to Design 3D Concrete Printing Materials and Processes
  3. Yu Hao, Zhang Weiwei, Liew Jia, Yin Binbin et al. (2025-11)
    Simulating Material Flow and Extrusion Dynamics in 3D Concrete Printing
  4. Lian Hongqian, Ding Tao (2025-09)
    Deformation of Inclined Concrete 3D Printing:
    A Computational Fluid Dynamics Analysis
  5. Liu Zhixin, Si Liang, Liu Yebao, Li Mingyang et al. (2025-08)
    Optimization of Printing Parameters Based on Computational Fluid Dynamics for Uniform Filament Mass Distribution at Corners in 3D Cementitious Material Printing
  6. Dong Enlai, Jia Zijian, Rao Suduan, Jia Lutao et al. (2025-08)
    Fiber Alignment Mechanism in 3D-Printed Ultra-High Performance Concrete Based on Fluid Dynamics Theory
  7. Ma Jiayue, Samarasinghe Don, Rotimi James, Zou Kelvin (2025-06)
    A Review of Supply Chain Dynamics of 3D Concrete Printing Construction Practice
  8. Si Wen, Khan Mehran, McNally Ciaran (2025-06)
    A Comprehensive Review of Rheological Dynamics and Process Parameters in 3D Concrete Printing
  9. Chen Meng, Sun Hao, Wang Yuting, Zhang Tong (2025-05)
    Relationship Between Interfacial Pore Structure and Anisotropic Dynamic Splitting Behaviour of 3D Printed Engineered Cementitious Composites
  10. Jia Yanhong, Chen Yao, Li Yanchen, Le Huirong (2025-05)
    Impacts of the Rheological Performance on Dynamic Printing of Metakaolin-Based Geopolymer
  11. Liu Zhenbang, Li Mingyang, Wang Xiangyu, Wong Teck et al. (2025-03)
    Investigate Mechanisms of Different Printing Parameters on the Mechanical Anisotropy of 3D Concrete Printing Elements by Using Computed Tomography Scan and Computational Fluid Dynamics Methods
  12. Chen Meng, Cheng Jianhua, Zhang Tong, Wang Yuting (2025-03)
    Experimental Characterization and Constitutive Modelling of the Anisotropic Dynamic Compressive Behavior of 3D Printed Engineered Cementitious Composites
  13. Duan Zhenhua, Tao Jie-Lin, Lin Can, Jiao Dengwu et al. (2025-02)
    3D Printing-Driven Dynamic Migration of Lightweight Microspheres in the Printable Mortars:
    Experiment and Modelling
  14. Vlieger Jentel, Blaakmeer Jan, Gruyaert Elke, Cizer Özlem (2025-01)
    Assessing Static and Dynamic Yield-Stress of 3D Printing Mortar with Recycled Sand:
    Influence of Sand-Geometry, Fineness Modulus, and Water-to-Binder Ratio
  15. Li Yeou-Fong, Liang Yu-Fang, Syu Jin-Yuan, Huang Chi-Hong et al. (2024-12)
    Static and Dynamic Mechanical Characteristics of 3D Printed Anisotropic Basalt Fiber-Reinforced Cement Mortar
  16. Du Longyu, Zhou Jiehang, Lai Jianzhong, Yin Xuexiang et al. (2024-12)
    Dynamic Damage Behavior and Anisotropic Mechanism of 3D Printed Reinforced Concrete Subjected to Penetration
  17. Rothe Tom, Gantner Stefan, Hack Norman, Hühne Christian (2024-11)
    Characterisation of the Alkaline-Resistance of Fiber-Reinforcement Strands Produced in a Dynamic Fiber Winding Process for 3D Concrete Printing
  18. Kamhawi Abdallah, Brown Jacob, Fahmy Ali, Meibodi Mania (2024-09)
    Waste-Free Production of Ultra-Thin Concrete Panels via Robotic 3D Printing and CNC Dynamic Bed Device
  19. Jacquet Yohan, Spangenberg Jon, Perrot Arnaud (2024-09)
    Exploring Viscosity and Friction Through Temperature:
    Understanding Self-Heating Dynamics of Non-Newtonian 3D Printable Construction Materials via CFD Modeling
  20. Jacquet Yohan, Maierdan Yierfan, Kawashima Shiho, Perrot Arnaud (2024-09)
    Stability-Prediction of 3D Printable Fresh Construction Materials by Analyzing Thixotropic Compressive Properties Using Extensional Dynamic Mechanical Analysis
  21. Hechtl Christian, Kränkel Thomas, Gehlen Christoph (2024-09)
    Investigations into the Dynamics of Penetration Tests in Digital Fabrication
  22. Ma Liangzhu, Yin Deshun, Ren Jiangtao, Tian Mingyuan et al. (2024-09)
    An Effective Thixotropic Structural-Dynamics Rheological-Model for 3D Printed Concrete Materials in the Flow-State
  23. Yao Yiming, Bu Dechao, Yu Jiamian, Shao Lijing et al. (2024-08)
    Flexural Behavior of Textile Reinforced 3D Printed Concrete Under Quasi-Static and Dynamic Impact Loads
  24. Cui Weijiu, Sun Haijun, Zhou Jiangang, Wang Sheng et al. (2024-07)
    Geometric Quality Evaluation of Three-Dimensional Printable Concrete Using Computational Fluid Dynamics
  25. Zhi Peng, Wu Yuching, Bai Meiyan (2024-06)
    Determining the Effect of Geometric and Dynamic Properties of Screws on Fiber-Orientation During FRC 3D Printing Based on Discrete Element Simulation
  26. Han Yilong, Zhu Lin, Xue Rui, Liu Chenyu et al. (2024-05)
    Unpacking the Dynamics of 3D Concrete Printing Adoption:
    An Integrated UTAUT-TOE Approach
  27. Abbaoui Khalid, Korachi Issam, Jai Mostapha, Šeta Berin et al. (2024-04)
    3D Concrete Printing Using Computational Fluid Dynamics:
    Modeling of Material-Extrusion with Slip-Boundaries
  28. Rothe Tom, Hühne Christian, Gantner Stefan, Hack Norman (2023-10)
    Dynamic Winding Process of Individualized Fiber-Reinforcement Structures for Additive Manufacturing in Construction
  29. Tabakova Vesela, Klug Christina, Schmitz Thomas (2023-10)
    Dynamic Extrusion-Control in Spot-Deposition Modeling for Porous 3D Clay-Structures
  30. Sun Houchao, Li Furong, Shi Feiting (2023-10)
    Experimental Study on Dynamic Mechanical Properties of 3D Printed Cement-Based Materials Under Splitting Tension After High Temperature
  31. Geng Songyuan, Long Wujian, Luo Qiling, Fu Junen et al. (2023-07)
    Intelligent Prediction of Dynamic Yield-Stress in 3D Printing Concrete Based on Machine Learning
  32. Mollah Md., Comminal Raphaël, Silva Wilson, Šeta Berin et al. (2023-07)
    Computational Fluid Dynamics Modelling and Experimental Analysis of Reinforcement-Bar-Integration in 3D Concrete Printing
  33. Dijkers Hugo, Simon George, Bos Freek, Salet Theo et al. (2023-05)
    Material-Characteristics of 3D Printed Concrete Subjected to Highly Dynamic Loading
  34. Yang Yekai, Wu Chengqing, Liu Zhongxian (2023-01)
    Rate-Dependent Behavior of 3D Printed Ultra-High-Performance Fiber-Reinforced Concrete Under Dynamic Splitting Tensile
  35. Mo Yixin, Xing Jianchun, Yue Songlin, Zhang Yamei et al. (2022-04)
    Dynamic Properties of 3D Printed Cement Mortar Based on Split Hopkinson Pressure Bar Testing
  36. Adams Thomas, Heuer Christoph, Brell-Cokcan Sigrid (2022-03)
    Dynamic 3D Print-Head for Spatial Strand-Extrusion of Fiber-Reinforced Concrete:
    Requirements, Development and Application
  37. Zhou Jiehang, Lai Jianzhong, Du Longyu, Wu Kai et al. (2021-12)
    Effect of Directionally Distributed Steel-Fiber on Static and Dynamic Properties of 3D Printed Cementitious Composite
  38. Napolitano Rosanna, Forni Daniele, Menna Costantino, Asprone Domenico et al. (2021-11)
    Dynamic Characterization of the Layer-Interface Properties of 3D Printed Concrete Elements
  39. Gantner Stefan, Rothe Tom, Hühne Christian, Hack Norman (2021-11)
    Reinforcement-Strategies for Additive Manufacturing in Construction Based on Dynamic Fiber Winding:
    Concepts and Initial Case Studies
  40. Mo Yixin, Yue Songlin, Zhou Qizhen, Feng Bowei et al. (2021-09)
    Dynamic Properties and Fractal Characteristics of 3D Printed Cement Mortar in SHPB-Test
  41. Hack Norman, Bahar Mohammad, Hühne Christian, Lopez William et al. (2021-06)
    Development of a Robot-Based Multi-Directional Dynamic Fiber Winding Process for Additive Manufacturing Using Shotcrete 3D Printing
  42. Comminal Raphaël, Silva Wilson, Andersen Thomas, Stang Henrik et al. (2020-10)
    Modelling of 3D Concrete Printing Based on Computational Fluid Dynamics
  43. Napolitano Rosanna, Menna Costantino, Forni Daniele, Asprone Domenico et al. (2020-07)
    Dynamic Behavior of Layered 3D Printed Concrete Elements
  44. Zongo Karim, Charrier Malo, Duval Corentin, Ouellet-Plamondon Claudiane (2020-07)
    Dynamic and Static Yield-Stress Determination of Cementitious Paste with Admixtures
  45. Lloret-Fritschi Ena, Wangler Timothy, Gebhard Lukas, Mata-Falcón Jaime et al. (2020-05)
    From Smart Dynamic Casting to a Growing Family of Digital Casting Systems
  46. Szabó Anna, Reiter Lex, Lloret-Fritschi Ena, Gramazio Fabio et al. (2020-04)
    Mastering Yield-Stress-Evolution and Formwork-Friction for Smart Dynamic Casting
  47. Wang Li, Tian Zehao, Ma Guowei, Zhang Mo (2020-02)
    Inter-Layer Bonding Improvement of 3D Printed Concrete with Polymer-Modified Mortar:
    Experiments and Molecular Dynamics Studies
  48. Rutzen Matthias, Volkmer Dirk, Weiss Ursula, Reischmann Lisa et al. (2019-09)
    Micro-Structural Analysis of Crack-Growth Caused by Static and Dynamic Loads in a Carbon-Fiber-Reinforced Cement-Paste
  49. Szabó Anna, Reiter Lex, Lloret-Fritschi Ena, Gramazio Fabio et al. (2018-09)
    Adapting Smart Dynamic Casting to Thin-Folded Geometries
  50. Lloret-Fritschi Ena, Scotto Fabio, Gramazio Fabio, Kohler Matthias et al. (2018-09)
    Challenges of Real-Scale Production with Smart Dynamic Casting
  51. Scotto Fabio, Lloret-Fritschi Ena, Gramazio Fabio, Kohler Matthias et al. (2018-05)
    Adaptive Control-System for Smart Dynamic Casting:
    Defining Fabrication-Informed Design-Tools and Process-Parameters in Digital Fabrication-Processes
  52. Qian Ye, Schutter Geert (2018-04)
    Different Effects of NSF and PCE Superplasticizer on Adsorption, Dynamic Yield-Stress and Thixotropy of Cement-Pastes
  53. Lloret-Fritschi Ena, Reiter Lex, Wangler Timothy, Gramazio Fabio et al. (2017-03)
    Smart Dynamic Casting:
    Slipforming with Flexible Formwork
  54. Thrane Lars, Brás Ana, Bakker Paul, Brameshuber Wolfgang et al. (2014-03)
    Computational Fluid Dynamics