#shear
Keywords by Co - Occurrence
- Baghdadi Abtin, Kloft Harald (2026-04)
Influence of Concrete Printing Techniques and Geometry on Shear-Compressive Capacity of Dry Concrete Joints
- Wu Yiwen, Liu Chao, Liu Huawei, Pan Zhihong et al. (2026-03)
Multiscale Mechanistic Insights into the Dual Effect of Interlayer Reinforcement on the Shear Behavior of 3D-Printed Concrete Composite Walls
- Uehara Shoma, Ohshiro Yusei, Shima Kanako, Sakamoto Kazuya et al. (2026-03)
Evaluation of Static Yield Stress and Buildability of PVA Fiber-Reinforced Mortars for 3D Printing Using a Vane Shear Test
- Sun Chang, Chu Zhipeng, Luo Yijing, Li Long et al. (2026-02)
Shear Performance of Reinforced 3DPM-NM Specimens with Different Interface Locking Designs
- Aghajani Delavar Mohammad, Sharma S., Chen H., Sideris Petros et al. (2026-01)
Experimental Investigation on Full-Scale Shear-Critical 3D Printed Concrete Walls Subjected to In-Plane Cyclic Loading
- Bharti Mrityunjay, Menon Arun, Santhanam Manu (2026-01)
Experimental Study of Hardened Properties of 3D-Printed Concrete Under Compression, Tension and Shear Considering Interlayer Influence
- Liang Xiangzhou, Li Jinqian, Li Ziwei, Wang Qiang (2025-12)
Experimental and Analytical Investigation of the Shear Behavior of the Developed BFRP Reinforced 3D Printed Composite Beams with U-Shaped Seawater Sea-Sand ECC Formwork
- Zhang Genbao, Chen Lingke, Liu Miao, Morsy Amr et al. (2025-12)
Enhancing the Shear Properties of U-Shaped Steel Wire Mesh Reinforced 3D Printed Composites
- Tian Xin, Shi Anqi, Fang Zhi, Lin Alexander (2025-09)
Multi-Interface Effects on Mechanical Behavior in 3D-Printed Concrete Shear Keys:
A Finite Element Modeling Strategy
- Guan Jingyuan, Wang Li, Bai Gang, Ma Guowei (2025-06)
Enhancing 3D Printed Formwork Columns via FRP Hoop Shear Connection Reinforcement
- Jacquet Yohan, Kawashima Shiho, Spangenberg Jon (2025-06)
Unveiling the Structural Build-up 3D Printable Cement-Based Materials:
From Small Amplitude Oscillatory Shear (SAOS) To Extensional (SAOE) Rheological Workflows
- Shi Anqi, Lee Kah, Bo Sun, Koh Weng et al. (2025-06)
Dimensional Effects on Shear Behaviour of 3D-Printed Concrete Shear Keys
- Mostert Jean-Pierre, Kruger Jacques (2025-06)
Improving Shear and Flexural Performance of Macroscale 3D Printed Concrete Beams Through Filament Interlocking
- Pei Qiang, Zhong Yingzhu, Wang Shuai, Zhang Luxi et al. (2025-06)
Interlayer Bonding Shear Performance and Constitutive Model of 3DPC with Different Fine Aggregate Gradations
- Hu Xiangcheng, Shazad Qamar, Li Fangyuan (2025-04)
Influence of the Shear Span Ratio on the Shear Performance of 3D-Printed Concrete Beams Without Web Reinforcement
- Shazad Qamar, Li Fangyuan (2025-01)
Interfacial Bond-Effects on Shear-Strength and Damage in 3D Printed Concrete Structures:
A Combined Experimental and Numerical Study
- Licciardello Lucia, Soto Alejandro, Kaufmann Walter, Metelli Giovanni (2025-01)
Determining the Strength of 3D Printed Concrete with the Modified Slant-Shear-Test
- Liu Qiong, Wang Qiming, Sun Chang, Li Jiawang et al. (2025-01)
Inter-Layer Shear Strength and Bonding Strength of Sinuous 3D Printed Mortar
- Wang Hailong, Shen Junyi, Sun Xiaoyan, Dong Weiwei et al. (2024-12)
Numerical Investigation on Shear Behavior of Reinforced Concrete Beam with 3D Printed Concrete Permanent Formwork
- Liu Chao, Zhang Yukun, Liu Huawei, Wu Yiwen et al. (2024-10)
Inter-Layer Reinforced 3D Printed Concrete with Recycled Coarse Aggregate:
Shear Properties and Enhancement Methods
- Edmund Dineth, Zahra Tatheer, Asad Mohammad, Thamboo Julian (2024-09)
Experimental Investigation on Tensile-Characteristics of 3D Printed Auxetic-Embedded Cementitious Composites and Shear-Bonding Behavior to Masonry
- Soave Francesco, Muciaccia Giovanni, Ferrara Liberato (2024-09)
Experimental Setup for Shear and Inter-Layer Bonding in a 3D Printed Concrete Framework
- Mudadu Antonio, Giulivo Marco, Menna Costantino (2024-09)
The Effect of Printing-Path on the Shear Behavior of 3D Printed Concrete Panels Under Diagonal Compression-Test
- Zhang Xiaoyue, Huang Wanru, Chen Zhaohui (2024-07)
Mechanical Behavior Investigation for the Timber-UHPC Shear Connector in 3D Printed Concrete-Based Composite Beam
- Yuan Yong, Wang Xiaoyun, Zhang Jiao-Long, Tao Yaxin et al. (2024-05)
The Shear Strength of the Interface Between Artificial Rock and Printed Concrete at Super Early-Ages
- Sun Chang, Zhao Haiye, Liu Qiong, Pan Feng (2024-04)
Shear Behavior of 3DPM-NM Specimens with Different Interfacial Locking Designs
- Kumar Lalit, Panda Biranchi, Muthu Nelson (2023-10)
A Simple Potential Energy Formulation for 3D Concrete Printed Structures Considering the Shear Effects in the Build-Direction
- Demont Léo, Mesnil Romain, Ducoulombier Nicolas, Caron Jean-François (2023-10)
Affordable In-Line Structuration Measurements of Printable Mortar with a Pocket-Shear-Vane
- Xie Xiangyu, Liu Xuemei, Ding Faxing, Zhang Lihai (2023-08)
Characteristics and Mechanism of the Particle-Migration Subject to the Shear Flow of Concrete Flow Under Pressure
- Hua Tianran, Lin Alexander, Poh Wen, Wong De et al. (2023-06)
3D Printed Concrete Shear Keys:
Design and Experimental Study
- Budiman Franky, Chandra Jimmy, Halim Alvin, Pudjisuryadi Pamuda (2023-04)
Flexural and Shear Behavior of 3D Printed Reinforced Concrete Beams:
An Experimental Study
- Wang Ziyue, Chen Zixuan, Xiao Jianzhuang, Ding Tao (2023-03)
Experimental Study on Interfacial Shear Behavior of 3D Printed Recycled Mortar
- Giridhar Greeshma, Prem Prabhat, Jiao Dengwu (2023-03)
Effect of Varying Shear Rates at Different Resting Times on the Rheology of 3D Printable Concrete
- Licciardello Lucia, Reggia Adriano, Metelli Giovanni, Plizzari Giovanni (2022-09)
Investigation of the Inter-Layer Strength of 3D Printed Concrete Shear Walls
- Marcucci Andrea, Kompella Sriram, Monte Francesco, Levi Marinella et al. (2022-06)
Early-Age Shear and Tensile Fracture Properties of 3D Printable Cementitious Mortar to Assess Printability Window
- Heever Marchant, Plessis Anton, Bester Frederick, Kruger Jacques et al. (2022-02)
A Mechanistic Evaluation Relating Microstructural Morphology to a Modified Mohr-Griffith Compression-Shear Constitutive-Model for 3D Printed Concrete
- Sun Xiaoyan, Ye Boxing, Lin Kangjian, Wang Hailong (2021-12)
Shear-Performance of 3D Printed Concrete Reinforced with Flexible or Rigid Materials Based on Direct-Shear-Test
- Wang Hailong, Shao Jianwen, Zhang Jing, Zou Daoqin et al. (2021-11)
Bond Shear Performances and Constitutive Model of Interfaces Between Vertical and Horizontal Filaments of 3D Printed Concrete
- Anton Ana-Maria, Reiter Lex, Skevaki Eleni (2021-11)
Strategies for Integrating Straight Rebar in 3DCP Columns and Shear Walls
- Kompella Sriram, Marcucci Andrea, Monte Francesco, Bassani Andrea et al. (2021-09)
A Study of Early-Age Shear Properties of 3D Printable Cementitious Mixes with Fiber-Reinforcements
- Fataei Shirin, Secrieru Egor, Mechtcherine Viktor, Roussel Nicolas (2021-07)
A First-Order Physical Model for the Prediction of Shear-Induced Particle-Migration and Lubricating-Layer Formation During Concrete Pumping
- Wang Li, Liu Yi, Yang Yu, Li Yanfeng et al. (2021-04)
Bonding Performance of 3D Printing Concrete with Self-Locking Interfaces Exposed to Compression-Shear and Compression-Splitting Stresses
- He Lewei, Chow Wai, Li Hua (2020-06)
Effects of Inter-Layer Notch and Shear Stress on Inter-Layer Strength of 3D Printed Cement-Paste
- Ivanova Irina, Mechtcherine Viktor (2020-01)
Possibilities and Challenges of Constant Shear-Rate-Test for Evaluation of Structural Build-Up-Rate of Cementitious Materials
- Nishijo Keisuke, Ohno Motohiro, Ishida Tetsuya (2019-12)
Quantitative Evaluation of Buildability in 3D Concrete Printing Based on Shear-Vane-Test
- Jayathilakage Roshan, Sanjayan Jay, Rajeev Pathmanathan (2019-01)
Direct-Shear-Test for the Assessment of Rheological Parameters of Concrete for 3D Printing Applications
- Vandenberg Aileen, Bessaies-Bey Hela, Wille Kay, Roussel Nicolas (2018-09)
Enhancing Printable Concrete Thixotropy by High-Shear Mixing