Skip to content

#relation

Keywords by Co - Occurrence

  1. Shilar Fatheali, Shilar Mubarakali (2025-12)
    Performance-Based Analysis of 3D Printed Geopolymers Relating Durability, Microstructure, and Life Cycle Assessment
  2. Luo Surong, Jin Wenhao, Zhang Zhaorui, Zhang Kaijian (2025-09)
    Constitutive Relationship of 3D Printed Fiber Reinforced Recycled Sand Concrete Under Uniaxial Compression
  3. Rusu Mihai, Ardelean Ioan (2025-06)
    Relations Between the Printability Descriptors of Mortar and NMR Relaxometry Data
  4. Chen Meng, Sun Hao, Wang Yuting, Zhang Tong (2025-05)
    Relationship Between Interfacial Pore Structure and Anisotropic Dynamic Splitting Behaviour of 3D Printed Engineered Cementitious Composites
  5. Zhao Wanting, Zhao Yu, Zhu Lingli, Guan Xuemao (2024-10)
    Preparation of 3D Printed Concrete from Solid Waste:
    Study of the Relationship Between Steel-Slag Characteristics and Early Performance in 3D Printing
  6. Singh Pranay, Gadde Venkateswara, Zhou Chi, Okumus Pinar et al. (2024-09)
    Development of 3D Printable Strain-Hardening Cementitious Composites for Bridge-Related Applications
  7. Souza Dias Leonardo, Anjos Marcos, Barbosa Marcella, Bezerra Ulisses (2024-07)
    Evaluation of Mix-Design Parameters Based on Basic Constitutive-Relationships for 3DCP Printing
  8. Cuevas Villalobos Karla, Weinhold Joachim, Stephan Dietmar, Kim Ji-Su (2023-09)
    Effect of Printing-Patterns on Pore-Related Microstructural Characteristics and Properties of Materials for 3D Concrete Printing Using In-Situ and Ex-Situ Imaging-Techniques
  9. Liu Zhenbang, Li Mingyang, Quah Tan, Wong Teck et al. (2023-09)
    Comprehensive Investigations on the Relationship Between the 3D Concrete Printing Failure Criterion and Properties of Fresh-State Cementitious Materials
  10. Chen Mingxu, Jin Yuan, Sun Keke, Wang Shoude et al. (2023-08)
    Study on the Durability of 3D Printed Calcium-Sulphoaluminate Cement-Based Materials Related to Rheology-Control
  11. Placzek Gerrit, Schwerdtner Patrick (2023-07)
    Concrete Additive Manufacturing in Construction:
    Integration Based on Component-Related Fabrication-Strategies
  12. Liu Chao, Wang Zhihui, Wu Yiwen, Liu Huawei et al. (2023-02)
    3D Printing Concrete with Recycled Sand:
    The Influence Mechanism of Extruded Pore-Defects on Constitutive Relationship
  13. Markin Slava, Mechtcherine Viktor (2023-01)
    Methods for Measuring Plastic Shrinkage and Related Cracking of 3D Printed Concrete
  14. Ma Lei, Zhang Qing, Lombois-Burger Hélène, Jia Zijian et al. (2022-09)
    Pore-Structure, Internal Relative Humidity, and Fiber-Orientation of 3D Printed Concrete with Polypropylene-Fiber and Their Relation with Shrinkage
  15. Zhu Binrong, Pan Jinlong, Li Junrui, Wang Penghui et al. (2022-07)
    Relationship Between Microstructure and Strain-Hardening Behavior of 3D Printed Engineered Cementitious Composites
  16. Markin Slava, Mechtcherine Viktor (2022-06)
    Measuring Plastic Shrinkage and Related Cracking of 3D Printed Concretes
  17. Moini Mohamadreza, Olek Jan, Zavattieri Pablo, Youngblood Jeffrey (2022-04)
    Early-Age Buildability-Rheological Properties Relationship in Additively Manufactured Cement-Paste Hollow Cylinders
  18. Zhang Yu, Qiao Hongxia, Qian Rusheng, Xue Cuizhen et al. (2022-02)
    Relationship Between Water-Transport Behavior and Inter-Layer Voids of 3D Printed Concrete
  19. Heever Marchant, Plessis Anton, Bester Frederick, Kruger Jacques et al. (2022-02)
    A Mechanistic Evaluation Relating Microstructural Morphology to a Modified Mohr-Griffith Compression-Shear Constitutive-Model for 3D Printed Concrete
  20. Yao Hao, Xie Zonglin, Li Zemin, Huang Chuhan et al. (2021-11)
    The Relationship Between the Rheological Behavior and Inter-Layer Bonding Properties of 3D Printing Cementitious Materials with the Addition of Attapulgite
  21. Shen Wenkai, Yuan Qiang, Shi Caijun, Ji Youhong et al. (2021-07)
    Influence of Pumping on the Resistivity Evolution of High-Strength Concrete and Its Relation to the Rheology
  22. Nair Sooraj, Panda Subhashree, Tripathi Avinaya, Neithalath Narayanan (2021-06)
    Relating Print-Velocity and Extrusion-Characteristics of 3D Printable Cementitious Binders:
    Implications Towards Testing Methods
  23. Chen Mingxu, Yang Lei, Zheng Yan, Huang Yongbo et al. (2020-04)
    Yield-Stress and Thixotropy-Control of 3D Printed Calcium-Sulfoaluminate Cement Composites with Metakaolin Related to Structural Build-Up
  24. Zhang Chao, Hou Zeyu, Chen Chun, Zhang Yamei et al. (2019-09)
    Design of 3D Printable Concrete Based on the Relationship Between Flowability of Cement-Paste and Optimum Aggregate-Content
  25. Huang Hai, Huang Tingjie, Yuan Qiang, Zhou Dajun et al. (2019-01)
    Temperature-Dependence of Structural Build-Up and Its Relation with Hydration Kinetics of Cement-Paste
  26. Ashrafi Negar, Duarte José, Nazarian Shadi, Meisel Nicholas (2018-10)
    Evaluating the Relationship Between Deposition and Layer-Quality in Large-Scale Additive Manufacturing of Concrete
  27. Khoshnevis Behrokh (2003-11)
    Automated Construction by Contour Crafting:
    Related Robotics and Information Technologies