Skip to content

#bridge

Keywords by Co - Occurrence

  1. Okangba Stanley, Ngcobo Ntebo, Mahachi Jeffrey (2025-12)
    Bridging Innovation and Governance:
    A UTAUT-Based Mixed-Method Study of 3D Concrete Printing Technology Acceptance in South Africa
  2. Subramaniam Kolluru, Maganty Sohanth, Kamakshi Tippabhotla, Ghandhi Dhruv et al. (2025-12)
    Design and Deployment of a Functionally Efficient 3D-Printed Concrete Bridge Developed by Form Optimization
  3. Ataei Sarah, Jafari Amirhosein (2025-10)
    Comparative Environmental Impact Assessment of 3D Concrete Printing and Precast Techniques in Bridge Construction:
    A Case Study Analysis
  4. Subramaniam Kolluru, Singh Prashant, Maganty Sohanth, Paritala Spandana (2025-10)
    Form Optimization Applications of 3D Concrete Printing:
    From Bridge to Protective Structures
  5. Leong Wai (2025-09)
    Structural Optimization and Performance Evaluation of Spain's 3D-Printed Concrete Bridges Using AI-Based Design Approaches
  6. Zhang Nan, Sanjayan Jay (2025-08)
    Concrete 3D Printing and Digital Fabrication Technologies for Bridge Construction
  7. Shiotani Tomoki, Asaue Hisafumi, Ogura Hiroki, Okude Nobuhiro et al. (2025-07)
    Evaluation of Permanent 3D Printed Formwork of a Bridge Pier Using Non-Destructive Testing Methods
  8. Liang Jingwen, Zeng Zuo, Wang Penglin, Wang Zhongxu et al. (2025-07)
    Emergency Response Mobile 3D Printing System:
    A Case Study in Rapid Manufacturing of Polyurethane Foam Bridges
  9. Boutsikas Paraschos, Chortis Alexandros, Argyros Apostolos, Michailidis Nikolas et al. (2025-06)
    Innovative Design and Experiment of a 3D Printed Topology Optimized Pedestrian Bridge
  10. Čítek David, Melter Oto, Hvizdal Ales, Auska Zuzana et al. (2025-05)
    Experimental 3D Printed Concrete Footbridge
  11. Miri Zahra, Baaj Hassan, Polak Maria (2025-03)
    3D-Printed Concrete Bridges:
    Material, Design, Construction, and Reinforcement
  12. Sangiorgio Valentino, Floris Ignazio, Duran Dayan (2025-01)
    Unified Integration Approach for Bridging BIM Model to 3D Construction Printing and Scale Prototyping
  13. Zhao Shuai, Zhou Ran, Luo Mingming, Liu Jianfei et al. (2024-12)
    Distributed Fiber Optic Sensing System for Vibration Monitoring of 3D Printed Bridges
  14. Chamatete Kunda, Yalçınkaya Çağlar (2024-10)
    Numerical Assessment of Thermal Bridging Effects in 3D Printed Foam-Concrete Walls
  15. Singh Pranay, Gadde Venkateswara, Zhou Chi, Okumus Pinar et al. (2024-09)
    Development of 3D Printable Strain-Hardening Cementitious Composites for Bridge-Related Applications
  16. Yang Min, Yao Xiaofei, Zhao Liguo, Zhang Yamei et al. (2024-09)
    Bridging Ancient Artistry and Modern Engineering:
    A 3D Printed Concrete Arch Bridge Inspired by Millennium-Old Bronze Patterns Using an Integrated Concrete 3D Printing System
  17. Timm Kim, Villiers Wibke, Zijl Gideon (2024-09)
    Bridging Technologies:
    Integrating 3DCP and OSC Through BIM Implementation
  18. Nana W., Dell’Endice Alessandro, Bhooshan Vishu, Zhou Fulei et al. (2024-09)
    Decarbonizing Concrete Construction:
    Case of the Phoenix 3D Printed Footbridge and Learnings for Engineering and Architecture
  19. Schneider Philip, Dietrich Sebastian, Richter Christiane, Asl Reza et al. (2024-09)
    Fabrication-Aware Design Method and Experimental Assessment of a Segmented Concrete Pedestrian Bridge Using SPI Technology.
  20. Bodea Serban, Dell’Endice Alessandro, Aloutsanidis Vasilis, Bürgin Theophil et al. (2024-08)
    Phoenix 3D Concrete-Printed Bridge:
    Falsework System and Construction Process Development
  21. Coward Andy, Forsberg Torben (2024-04)
    Reconstruction of a Ukrainian Road Bridge by Use of 3D Printed minimass™ Beams
  22. Yang Min, Li Chao, Liu Hao, Huo Longfei et al. (2024-02)
    Exploring the Potential for Carrying Capacity and Reusability of 3D Printed Concrete Bridges:
    Construction, Dismantlement, and Reconstruction of a Box Arch Bridge
  23. Raza Saim, Triantafyllidis Zafiris, Anton Ana-Maria, Dillenburger Benjamin et al. (2024-01)
    Seismic Performance of Fe-SMA Pre-Stressed Segmental Bridge Columns with 3D Printed Permanent Concrete Formwork
  24. Rennen Philipp, Gantner Stefan, Dielemans Gido, Bleker Lazlo et al. (2023-12)
    Robotic Knitcrete:
    Computational Design and Fabrication of a Pedestrian Bridge Using Robotic Shotcrete on a 3D Knitted Formwork
  25. Zhi Peng, Wu Yuching, Rabczuk Timon (2023-11)
    Effects of Time-Varying Liquid Bridge Forces on Rheological Properties, and Resulting Extrudability and Constructability of Three-Dimensional Printing Mortar
  26. Asensio Javier, Josa Irene, Monserrat Andrea, Fuente Albert (2023-09)
    3D‐Printed Concrete Footbridges:
    An Approach to Assess the Sustainability Performance
  27. Dell’Endice Alessandro, Bouten Sam, Mele Tom, Block Philippe (2023-07)
    Structural Design and Engineering of Striatus, an Unreinforced 3D Concrete Printed Masonry Arch Bridge
  28. Pons-Valladares Oriol, Casanovas-Rubio Maria, Armengou Jaume, Fuente Albert (2023-02)
    Approach for Sustainability-Assessment for Footbridge Construction Technologies:
    Application to the First World D-Shape 3D Printed Fiber-Reinforced Mortar Footbridge in Madrid
  29. Kim Tae, Nguyen Duy, Shim Chang (2022-06)
    Digital Fabrication for DfMA of a Prefabricated Bridge Pier
  30. Ooms Ticho, Vantyghem Gieljan, Tao Yaxin, Bekaert Michiel et al. (2022-06)
    The Production of a Topology-Optimized 3D Printed Concrete Bridge
  31. Bhooshan Shajay, Bhooshan Vishu, Dell’Endice Alessandro, Chu Jianfei et al. (2022-06)
    The Striatus Bridge
  32. Fuente Albert, Blanco Ana, Galeote Eduardo, Cavalaro Sergio (2022-04)
    Structural Fiber-Reinforced Cement-Based Composite Designed for Particle-Bed 3D Printing Systems:
    Case Study Parque De Castilla Footbridge in Madrid
  33. Miryousefi Ata Sara, Kazemian Ali, Jafari Amirhosein (2022-03)
    Application of Concrete 3D Printing for Bridge Construction:
    Current Challenges and Future Directions
  34. Ahmed Zeeshan, Wolfs Robert, Bos Freek, Salet Theo (2021-11)
    A Framework for Large-Scale Structural Applications of 3D Printed Concrete:
    The Case of a 29m Bridge in the Netherlands
  35. Javed Ali, Mantawy Islam, Azizinamini Atorod (2021-05)
    3D Printing of Ultra-High-Performance Concrete for Robotic Bridge Construction
  36. Zhan Qiang, Zhou Xinjie, Yuan Philip, Zhou Xinjie (2021-04)
    Design and Fabrication of a 3D Concrete Printed Pre-Stressed Bridge
  37. Xu Weiguo, Gao Yuan, Sun Chenwei, Wang Zhi (2020-09)
    Fabrication and Application of 3D Printed Concrete Structural Components in the Boshan Pedestrian Bridge Project
  38. Kinomura Koji, Murata Satoshi, Yamamoto Yujin, Obi Hirotoshi et al. (2020-07)
    Application of 3D Printed Segments Designed by Topology-Optimization-Analysis to a Practical-Scale Pre-Stressed Pedestrian Bridge
  39. Gaag Bert, Ijselmuijden Kees, Kardas Maurice, Herwaarden Joël et al. (2019-09)
    Structural Bridge Design for Additive Manufacturing
  40. Salet Theo, Ahmed Zeeshan, Bos Freek, Laagland Hans (2018-05)
    Design of a 3D Printed Concrete Bridge by Testing
  41. Salet Theo, Ahmed Zeeshan, Bos Freek (2018-05)
    3D Printed Concrete Bridge
  42. Bohan Richard (2016-05)
    Adding Manufacturing Using Concrete:
    A Bridge Too Far?