Skip to content

A BIM-Enabled Robot-Control System for Automated Integration Between Rebar-Reinforcement and 3D Concrete Printing (2024-04)

10.1080/17452759.2024.2344991

Du Song,  Teng Fei,  Zhuang Zicheng, Zhang Dong,  Li Mingyang,  Li Heng,  Weng Yiwei
Journal Article - Virtual and Physical Prototyping, Vol. 19, Iss. 1

Abstract

When the article was first published, the authors have identified the error that were inadvertently introduced to the figures, and this affected some of the results. In order to rectify the error, the following changes have been made to the article. A correction has been made on page 6 of the PDF, the Figure 3 appears three times and on page 14, the figure and caption of Figure 14 has overlapped.

23 References

  1. Ahmed Ghafur, Askandar Nasih, Jumaa Ghazi (2022-07)
    A Review of Large-Scale 3DCP:
    Material-Characteristics, Mix-Design, Printing-Process, and Reinforcement-Strategies
  2. Asprone Domenico, Auricchio Ferdinando, Menna Costantino, Mercuri Valentina (2018-03)
    3D Printing of Reinforced Concrete Elements:
    Technology and Design Approach
  3. Baz Bilal, Aouad Georges, Leblond Philippe, Mansouri Omar et al. (2020-05)
    Mechanical Assessment of Concrete:
    Steel Bonding in 3D Printed Elements
  4. Bos Freek, Ahmed Zeeshan, Jutinov Evgeniy, Salet Theo (2017-11)
    Experimental Exploration of Metal-Cable as Reinforcement in 3D Printed Concrete
  5. Bos Freek, Wolfs Robert, Ahmed Zeeshan, Salet Theo (2016-08)
    Additive Manufacturing of Concrete in Construction:
    Potentials and Challenges of 3D Concrete Printing
  6. Davtalab Omid, Kazemian Ali, Khoshnevis Behrokh (2018-01)
    Perspectives on a BIM-Integrated Software Platform for Robotic Construction through Contour Crafting
  7. Grasser Georg, Pammer Lorenz, Köll Harald, Werner E. et al. (2020-07)
    Complex Architecture in Printed Concrete:
    The Case of the Innsbruck University 350th Anniversary Pavilion COHESION
  8. Kristombu Baduge Shanaka, Navaratnam Satheeskumar, Zidan Yousef, McCormack Tom et al. (2021-01)
    Improving Performance of Additive Manufactured Concrete:
    A Review on Material Mix-Design, Processing, Inter-Layer Bonding, and Reinforcing-Methods
  9. Lim Jian, Panda Biranchi, Pham Quang-Cuong (2018-05)
    Improving Flexural Characteristics of 3D Printed Geopolymer Composites with In-Process Steel-Cable-Reinforcement
  10. Ma Guowei, Buswell Richard, Silva Wilson, Wang Li et al. (2022-03)
    Technology Readiness:
    A Global Snapshot of 3D Concrete Printing and the Frontiers for Development
  11. Ma Guowei, Li Zhijian, Wang Li, Bai Gang (2018-10)
    Micro-Cable-Reinforced Geopolymer Composite for Extrusion-Based 3D Printing
  12. Marchment Taylor, Sanjayan Jay (2019-10)
    Mesh Reinforcing Method for 3D Concrete Printing
  13. Mechtcherine Viktor, Buswell Richard, Kloft Harald, Bos Freek et al. (2021-02)
    Integrating Reinforcement in Digital Fabrication with Concrete:
    A Review and Classification Framework
  14. Mechtcherine Viktor, Grafe Jasmin, Nerella Venkatesh, Spaniol Erik et al. (2018-05)
    3D Printed Steel-Reinforcement for Digital Concrete Construction:
    Manufacture, Mechanical Properties and Bond Behavior
  15. Mechtcherine Viktor, Tittelboom Kim, Kazemian Ali, Kreiger Eric et al. (2022-04)
    A Roadmap for Quality-Control of Hardening and Hardened Printed Concrete
  16. Stieler David, Schwinn Tobias, Menges Achim (2022-04)
    Additive Formwork in Pre-Cast Construction:
    Agent-Based Methods for Fabrication-Aware Modularization of Concrete Building Elements
  17. Tay Yi, Lim Sean, Phua Seng, Tan Ming et al. (2023-10)
    Exploring Carbon-Sequestration-Potential Through 3D Concrete Printing
  18. Tay Yi, Panda Biranchi, Paul Suvash, Mohamed Nisar et al. (2017-05)
    3D Printing Trends in Building and Construction Industry:
    A Review
  19. Teng Fei, Li Mingyang, Zhang Dong, Li Heng et al. (2023-11)
    BIM-Enabled Collaborative-Robots 3D Concrete Printing to Construct MiC with Reinforcement
  20. Weng Yiwei, Li Mingyang, Ruan Shaoqin, Wong Teck et al. (2020-03)
    Comparative Economic, Environmental and Productivity-Assessment of a Concrete Bathroom Unit Fabricated Through 3D Printing and a Pre-Cast Approach
  21. Weng Yiwei, Mohamed Nisar, Lee Brian, Gan Nicole et al. (2021-02)
    Extracting BIM Information for Lattice Tool-Path-Planning in Digital Concrete Printing with Developed Dynamo Script:
    A Case Study
  22. Yu Shiwei, Du Hongjian, Sanjayan Jay (2020-07)
    Aggregate-Bed 3D Concrete Printing with Cement-Paste Binder
  23. Zhu Binrong, Nematollahi Behzad, Pan Jinlong, Zhang Yang et al. (2021-04)
    3D Concrete Printing of Permanent Formwork for Concrete Column Construction

0 Citations

BibTeX 
@article{du_teng_zhua_zhan.2024.ABERCSfAIBRRa3CPb,
  author            = "Song Du and Fei Teng and Zicheng Zhuang and Dong Zhang and Mingyang Li and Heng Li and Yiwei Weng",
  title             = "A BIM-Enabled Robot-Control System for Automated Integration Between Rebar-Reinforcement and 3D Concrete Printing",
  doi               = "10.1080/17452759.2024.2344991",
  year              = "2024",
  journal           = "Virtual and Physical Prototyping",
  volume            = "19",
  number            = "1",
}
Formatted Citation

S. Du, “A BIM-Enabled Robot-Control System for Automated Integration Between Rebar-Reinforcement and 3D Concrete Printing”, Virtual and Physical Prototyping, vol. 19, no. 1, 2024, doi: 10.1080/17452759.2024.2344991.

Du, Song, Fei Teng, Zicheng Zhuang, Dong Zhang, Mingyang Li, Heng Li, and Yiwei Weng. “A BIM-Enabled Robot-Control System for Automated Integration Between Rebar-Reinforcement and 3D Concrete Printing”. Virtual and Physical Prototyping 19, no. 1 (2024). https://doi.org/10.1080/17452759.2024.2344991.