Skip to content

#rebar

Keywords by Co - Occurrence

  1. Liu Chao, Chen Xianqin, Luo Zhiyu, Liu Huawei et al. (2026-01)
    Effects of Pore Defects on Interfacial Bonding Between Rebar and 3D Printed Coarse Aggregate Concrete Under Multiple Loading Conditions
  2. Wang Xiangyu, Wang Sizhe, Deng North, Liu Zhenbang et al. (2026-01)
    Robotic Rebar Insertion and Grouting for Reinforcement of 3D Printed Concrete:
    Technique Development and Bond Behavior Characterization
  3. Liu Zhenbang, Li Mingyang, Wang Sizhe, Deng North et al. (2026-01)
    Investigation on Bond-Slip Performance of Steel Rebar Embedded in Concrete Confined by 3D Concrete Printing Formwork
  4. Bates Rhys, Aslani Farhad (2025-11)
    Performance of 3D-Printed Concrete Columns with GFRP Rebars Under Axial Compression
  5. Liu Xiongfei, Yang Xiaojie, Sun Yuhang (2025-04)
    Synchronous Construction of Spray-Based 3D Printed Reinforced Concrete Structure:
    Effect of 2.5D Rebar Structure on the Flexural Performance of Slab
  6. Ogura Hiroki, Hara Koichiro, Yamamoto Shinya, Abe Hiroyuki (2024-09)
    Flexural Performance of Fiber-Reinforced 3D Printed Concrete Beams with Axial Rebar
  7. Freund Niklas, David Martin, Dröder Klaus, Lowke Dirk (2024-09)
    Vibrated Short Rebar Insertion:
    The Effect of Integration Time on the Resulting Bond Quality
  8. Liu Zhenbang, Li Mingyang, Wang Xiangyu, Wang Sizhe et al. (2024-07)
    Axial Performances of the Steel-Rebar-Reinforced Column Confined by the Steel-Cable-Reinforced 3D Concrete Printing Permanent Formwork
  9. Du Song, Teng Fei, Zhuang Zicheng, Zhang Dong et al. (2024-04)
    A BIM-Enabled Robot-Control System for Automated Integration Between Rebar-Reinforcement and 3D Concrete Printing
  10. Du Song, Teng Fei, Zhuang Zicheng, Zhang Dong et al. (2024-03)
    A BIM-Enabled Robot-Control System for Automated Integration Between Rebar-Reinforcement and 3D Concrete Printing
  11. Xiao Jianzhuang, Liu Haoran, Ding Tao, Yu Kequan et al. (2024-02)
    Rebar-Free Concrete Construction:
    Concept, Opportunities and Challenges
  12. Liu Huawei, Liu Chao, Zhang Yamei, Bai Guoliang (2023-11)
    Bonding Properties Between 3D Printed Coarse Aggregate Concrete and Rebar Based on Interface Structural Characteristics
  13. Cao Xiangpeng, Yu Shiheng, Cui Hongzhi (2023-08)
    Experimental Study of the In-Situ Rebar-Splicing-Technique to Reinforce 3D Printed Concrete in Vertical Directions
  14. Cao Xiangpeng, Yu Shiheng, Cui Hongzhi, Li Zongjin (2023-07)
    In-Situ Coating Technique for Rebar Installation for 3D Printed Reinforced Concrete
  15. Aramburu Amaia, Calderon-Uriszar-Aldaca Iñigo, Puente Iñigo (2023-02)
    Parametric Modelling of 3D Printed Concrete Segmented Beams with Rebars Under Bending Moments
  16. Aramburu Amaia, Calderon-Uriszar-Aldaca Iñigo, Puente Iñigo (2022-05)
    Bonding Strength of Steel-Rebars Perpendicular to the Hardened 3D Printed Concrete-Layers
  17. Nguyen Ngoc, Bui Tan-Trung, Bui Quoc-Bao (2022-02)
    Fiber-Reinforced Concrete for Slabs without Steel-Rebar-Reinforcement:
    Assessing the Feasibility for 3D Printed Individual Houses
  18. Anton Ana-Maria, Reiter Lex, Skevaki Eleni (2021-11)
    Strategies for Integrating Straight Rebar in 3DCP Columns and Shear Walls
  19. Frangez Valens, Lloret-Fritschi Ena, Taha Nizar, Gramazio Fabio et al. (2021-10)
    Depth-Camera-Based Rebar Detection and Digital Reconstruction for Robotic Concrete Spraying