Skip to content

Advancing Sustainable Construction (2024-05)

Insights into Clay-Based Additive Manufacturing for Architecture, Engineering, and Construction

10.5772/intechopen.1005442

del Los Angeles Ortega Rosario Maria, Medina Melany, Duque Rafael, Alberto Jaén Ortega Antonio, Castillero Luis
Contribution - Developments in Clay Science and Construction Techniques

Abstract

Additive manufacturing(AM) has evolved from rapid prototyping to a versatile technology in nano to large-scale fabrication, gaining traction in various sectors such as medicine, aeronautics, and pharmaceuticals. Its recent application in the architecture, engineering, and construction (AEC) industry marks a significant shift, especially in using traditional concrete and steel materials to innovative, sustainable options like clay. The increasing demand for ecofriendly construction materials propels this development. This chapter presents an overview of the latest developments in clay-based AM within the AEC sector. It discusses the challenges and opportunities of this technology, integrating design methods and material approaches. The chapter also examines the critical interplay of geometry, material properties, and process parameters in AM. Aimed at professionals in the field, it offers a comprehensive framework and practical guidelines for engineers, designers, and architects in this dynamic domain.

37 References

  1. Abdallah Yomna, Estévez Alberto (2021-10)
    3D Printed Biodigital Clay Bricks
  2. Adaloudis Max, Bonnin Roca Jaime (2021-05)
    Sustainability Tradeoffs in the Adoption of 3D Concrete Printing in the Construction Industry
  3. Ahmed Ghafur (2023-01)
    A Review of 3D Concrete Printing:
    Materials and Process Characterization, Economic Considerations and Environmental Sustainability
  4. Alqenaee Amnah, Memari Ali (2022-02)
    Experimental Study of 3D Printable Cob Mixtures
  5. Aydin Eylül, Kara Burhan, Bundur Zeynep, Özyurt Nilüfer et al. (2022-08)
    A Comparative Evaluation of Sepiolite and Nano-Montmorillonite on the Rheology of Cementitious Materials for 3D Printing
  6. Bajpayee Aayushi, Farahbakhsh Mehdi, Zakira Umme, Pandey Aditi et al. (2023-03)
    In-Situ Resource Utilization and Reconfiguration of Soils into Construction Materials for the Additive Manufacturing of Buildings
  7. Demiral Nazim, Ozkan Ekinci Mehmet, Şahin Oğuzhan, İlcan Hüseyin et al. (2022-10)
    Mechanical Anisotropy Evaluation and Bonding Properties of 3D Printable Construction and Demolition Waste-Based Geopolymer Mortars
  8. Dielemans Gido, Lachmayer Lukas, Recker Tobias, Atanasova Lidia et al. (2022-06)
    Mobile Additive Manufacturing:
    A Case Study of Clay Formwork for Bespoke In-Situ Concrete Construction
  9. İlcan Hüseyin, Şahin Oğuzhan, Kul Anil, Yıldırım Gürkan et al. (2022-03)
    Rheological Properties and Compressive Strength of Construction and Demolition Waste-Based Geopolymer Mortars for 3D Printing
  10. Jacquet Yohan, Perrot Arnaud (2023-06)
    Evolutionary Approach Based on Thermoplastic Bio-Based Building Material for 3D Printing Applications:
    An Insight into a Mix of Clay and Wax
  11. Jauk Julian, Gosch Lukas, Vašatko Hana, Königsberger Markus et al. (2023-09)
    Filament-Reinforced 3D Printing of Clay
  12. Kontovourkis Odysseas, Tryfonos George (2017-07)
    Integrating Parametric Design with Robotic Additive Manufacturing for 3D Clay Printing:
    An Experimental Study
  13. Kontovourkis Odysseas, Tryfonos George (2019-11)
    Robotic 3D Clay Printing of Prefabricated Non-Conventional Wall Components Based on a Parametric-Integrated Design
  14. Liu Siyu, Lu Bing, Li Hongliang, Pan Zehua et al. (2022-03)
    A Comparative Study on Environmental Performance of 3D Printing and Conventional Casting of Concrete Products with Industrial Wastes
  15. Madrid Javier, Ortega Guillermo, Gorostiza Carabaño Javier, Olsson Nils et al. (2023-02)
    3D Claying:
    3D Printing and Recycling Clay
  16. Mechtcherine Viktor, Bos Freek, Perrot Arnaud, Silva Wilson et al. (2020-03)
    Extrusion-Based Additive Manufacturing with Cement-Based Materials:
    Production Steps, Processes, and Their Underlying Physics
  17. Mechtcherine Viktor, Nerella Venkatesh, Will Frank, Näther Mathias et al. (2019-08)
    Large-Scale Digital Concrete Construction:
    CONPrint3D Concept for On-Site, Monolithic 3D Printing
  18. Mohan Manu, Rahul Attupurathu, Schutter Geert, Tittelboom Kim (2020-10)
    Extrusion-Based Concrete 3D Printing from a Material Perspective:
    A State of the Art Review
  19. Motalebi Arash, Khondoker Mohammad, Kabir Golam (2023-08)
    A Systematic Review of Life Cycle Assessments of 3D Concrete Printing
  20. Nguyen Vuong, Nguyen-Xuan Hung, Panda Biranchi, Tran Jonathan (2022-03)
    3D Concrete Printing Modelling of Thin-Walled Structures
  21. Nodehi Mehrab, Ozbakkaloglu Togay, Gholampour Aliakbar (2022-04)
    Effect of Supplementary Cementitious Materials on Properties of 3D Printed Conventional and Alkali-Activated Concrete:
    A Review
  22. Perrot Arnaud, Rangeard Damien, Courteille Eric (2018-04)
    3D Printing of Earth-Based Materials:
    Processing Aspects
  23. Raza Muhammad, Zhong Ray (2022-08)
    A Sustainable Roadmap for Additive Manufacturing Using Geopolymers in Construction Industry
  24. Riaz Raja, Usman Muhammad, Ali Ammar, Majid Usama et al. (2023-06)
    Inclusive Characterization of 3D Printed Concrete in Additive Manufacturing:
    A Detailed Review
  25. Robayo-Salazar Rafael, Gutiérrez Ruby, Villaquirán-Caicedo Mónica, Delvasto Arjona Silvio (2022-12)
    3D Printing with Cementitious Materials:
    Challenges and Opportunities for the Construction Sector
  26. Rocha Douglas, Faria Paulina, Lucas Sandra (2023-12)
    Additive Manufacturing of Earth-Based Materials:
    A Literature Review on Mortar-Composition, Extrusion, and Processing Earth
  27. Rückrich Stefanie, Agranati Galit, Grobman Yasha (2022-12)
    Earth-Based Additive Manufacturing:
    A Field-Oriented Methodology for Evaluating Material-Printability
  28. Şahin Oğuzhan, İlcan Hüseyin, Ateşli Anıl, Kul Anil et al. (2021-05)
    Construction and Demolition Waste-Based Geopolymers Suited for Use in 3D Additive Manufacturing
  29. Sahoo Pitabash, Gupta Souradeep (2023-06)
    3D Printable Earth-Based Alkali-Activated Materials:
    Role of Mix-Design and Clay-Rich Soil
  30. Sangiorgio Valentino, Parisi Fabio, Fieni Francesco, Parisi Nicola (2022-01)
    The New Boundaries of 3D-Printed Clay-Bricks-Design:
    Printability of Complex Internal Geometries
  31. Sauter Andreas, Nasirov Aslan, Fidan Ismail, Allen Michael et al. (2020-11)
    Development, Implementation and Optimization of a Mobile 3D Printing Platform
  32. Taher Ammar, Aşut Serdar, Spoel Willem (2023-10)
    An Integrated Workflow for Designing and Fabricating Multi-Functional Building Components Through Additive Manufacturing with Clay
  33. Tay Yi, Qian Ye, Tan Ming (2019-05)
    Printability-Region for 3D Concrete Printing Using Slump- and Slump-Flow-Test
  34. Teixeira João, Schaefer Cecília, Rangel Bárbara, Maia Lino et al. (2022-11)
    A Road Map to Find in 3D Printing a New Design Plasticity for Construction:
    The State of Art
  35. Wi Kwangwoo, Suresh Vignesh, Wang Kejin, Li Beiwen et al. (2019-12)
    Quantifying Quality of 3D Printed Clay Objects Using a 3D Structured Light Scanning System
  36. Wu Yiwen, Liu Chao, Liu Huawei, Zhang Zhenzi et al. (2021-07)
    Study on the Rheology and Buildability of 3D Printed Concrete with Recycled Coarse Aggregates
  37. Zhou Yiyi, Luo Haoran, Anand Kamal, Singh Amardeep et al. (2024-02)
    Sustainable Use of Ultrafine Recycled Glass in Additive Manufactured Reactive-Powder Concrete

0 Citations

BibTeX 
@inproceedings{los_medi_duqu_albe.2024.ASC,
  author            = "Maria del Los Angeles Ortega Rosario and Melany Medina and Rafael Duque and Antonio Alberto Jaén Ortega and Luis Castillero",
  title             = "Advancing Sustainable Construction: Insights into Clay-Based Additive Manufacturing for Architecture, Engineering, and Construction",
  doi               = "10.5772/intechopen.1005442",
  year              = "2024",
  booktitle         = "Developments in Clay Science and Construction Techniques: Working Title",
  editor            = "Amjad Almusaed and Asaad Almssad and Ibrahim Yitmen",
}
Formatted Citation

M. del Los Angeles Ortega Rosario, M. Medina, R. Duque, A. A. J. Ortega and L. Castillero, “Advancing Sustainable Construction: Insights into Clay-Based Additive Manufacturing for Architecture, Engineering, and Construction”, in Developments in Clay Science and Construction Techniques: Working Title, 2024. doi: 10.5772/intechopen.1005442.

Los Angeles Ortega Rosario, Maria del, Melany Medina, Rafael Duque, Antonio Alberto Jaén Ortega, and Luis Castillero. “Advancing Sustainable Construction: Insights into Clay-Based Additive Manufacturing for Architecture, Engineering, and Construction”. In Developments in Clay Science and Construction Techniques: Working Title, edited by Amjad Almusaed, Asaad Almssad, and Ibrahim Yitmen, 2024. https://doi.org/10.5772/intechopen.1005442.