Skip to content

#advance

Keywords by Co - Occurrence

  1. Bugarin Juan, Hajjar Ayla, Ssengooba Aloysious, Rangel Bárbara et al. (2026-01)
    Advancing Circular Bioeconomy and Sustainable Construction in the Iberian Peninsula:
    Addressing the Potential of Timber Residues for 3D Printing
  2. Athira R., Sathyan Dhanya (2025-11)
    Review of 3D Printing Advancements in Geopolymer Concrete:
    Current Challenges and Future Directions
  3. Manickavasakam Karnan, Huri Mohammed, Kharma Khaled, Hosan Anwar et al. (2025-11)
    Smart 3D-Printed Concrete:
    Recent Advances in Self-Sensing Mix Design and Functional Reinforcements
  4. Yavartanoo Fahimeh, Bolhassani Damon, Akbarzadeh Masoud, Ororbia Maximilian et al. (2025-10)
    Advanced Finite Element Modeling of 3D-Printed Post-Tensioned Concrete Beams with Experimental Validation
  5. Ke Zhijiang, Li Zichang, Chen Zhengfei, Xu Yao et al. (2025-10)
    Technological Advancements and Challenges of Robotic Arm-Based 3D Printing for Hydraulic Tunnel Lining
  6. Gajjar Parth, Gajjar T., Tangirala Aniruddha, Shrestha Ajad (2025-10)
    Advancing 3D Printing in Construction:
    Rheological Behaviors of Cementitious Composites with Supplementary Materials
  7. Ozturk Onur, Lunsford Caleb, Nair Sriramya (2025-10)
    Advancing Underwater Construction with 3D Printing:
    A Two-Stage Approach
  8. Elhag Ahmed, Mabrouk Abdelkader, Ghazouani Nejib, Nasir Umara (2025-09)
    Advances in Sustainable 3D-Printed Geopolymer Concrete:
    Materials, Performance, and Environmental Impact in Next Generation Green Construction
  9. Ramirez Rodriguez Fatima, Ahmad Rafiq (2025-09)
    Sustainable Technology Advances for Additive Construction:
    A State-of-the-Art Review
  10. Kubjana Lucy, Aigbavboa Clinton, Adekunle Peter (2025-09)
    Advancing Sustainable 3D-Printed Concrete:
    A Bibliometric Study on Financing Housing Options
  11. Liu Shijie, Liu Tong, Alqurashi Muwaffaq, Abdou Elabbasy Ahmed et al. (2025-09)
    Advancing 3D-Printed Fiber-Reinforced Concrete for Sustainable Construction:
    A Comparative Optimization Based Study of Hybrid Machine Intelligence Models for Predicting Mechanical Strength and CO₂ Emissions
  12. Si Wen, Carr Liam, Zia Asad, Khan Mehran et al. (2025-08)
    Advancing 3D Printable Concrete with Nanoclays:
    Rheological and Mechanical Insights for Construction Applications
  13. Shilar Fatheali, Ganachari Sharanabasava, Osman N., Ramesh S. et al. (2025-08)
    Advancements in Fiber-Reinforced Geopolymer Along with 3D Printed and Nano Concrete in Sustainable Construction
  14. Zhang Chao, Ren Juanjuan, Zhang Shihao, Guo Yipu et al. (2025-07)
    Advanced Impact Resistance Design Through 3D-Printed Concrete Technology:
    Unleashing the Potential of Additive Manufacturing for Protective Structures
  15. Chhabra Gulshan, Gupta Anjali, Bali Rajan, Tanwar Lovesh (2025-07)
    Advancing Sustainability in Construction:
    A Comprehensive Study on 3D-Printed Concrete Technologies
  16. Bradshaw James, Si Wen, Khan Mehran, McNally Ciaran (2025-07)
    Emerging Insights into the Durability of 3D-Printed Concrete:
    Recent Advances in Mix Design Parameters and Testing
  17. Mahmoodi Obaid, Siad Hocine, Lachemi Mohamed, Şahmaran Mustafa (2025-07)
    Recent Advances in CDW-Based Geopolymers:
    A Review of Mechanical Performance, Structural Application, 3D Printing, Durability and Sustainability
  18. Flor-Unda Omar, Toapanta Carlos, Fuentes Mauricio, Rivera Mario (2025-07)
    Additive Manufacturing Technologies:
    Advances for the Construction Industry
  19. Irshidat Mohammad, Amjad Umar, Kumar Kishor, John John et al. (2025-06)
    Advancing the Field of 3D Concrete Printing by Exploring the Use of Eco-Friendly Mortars
  20. Pour Arash, Farsangi Ehsan, Yang T., Li Shaofan et al. (2025-06)
    3D Printing of Conventional and Geopolymer Concretes:
    Advancements, Challenges, Future Directions, and Cost Analysis
  21. Lamb Bannon, Sabih Gauhar (2025-06)
    Advancements in 3D Concrete Printing Materials
  22. Hopkins Ben, Si Wen, Khan Mehran, McNally Ciaran (2025-06)
    Recent Advancements in Polypropylene Fiber-Reinforced 3D-Printed Concrete:
    Insights into Mix Ratios, Testing Procedures, and Material Behaviour
  23. Trung Hieu Nguyen, Minh Trieu Nguyen, Dang Tri, Thinh Nguyen (2025-05)
    Advanced Sliding Mode Control Strategy for High-Performance 3D Concrete Printing
  24. Jaji Mustapha, Babafemi Adewumi, Zijl Gideon (2025-05)
    Mechanical Performance of Extrusion-Based Two-Part 3D-Printed Geopolymer Concrete:
    A Review of Advances in Laboratory and Real-Scale Construction Projects
  25. Liu Junli, Hai Hoang, Tran Mien, Tran Jonathan (2025-04)
    Advancing Microstructural Insights in 3D-Printed Cementitious Materials via X-Ray Micro-Computed Tomography
  26. Oladunni Oluwole, Lee Carman, Ibrahim Idowu, Olanrewaju Oludolapo (2025-03)
    Advances in Sustainable Additive Manufacturing:
    A Systematic Review for Construction Industry to Mitigate Greenhouse Gas Emissions
  27. Chai Hwa, Shiotani Tomoki (2025-03)
    Opening Letter of RILEM TC QPA:
    Quality and Performance Assurance of Additively Manufactured Cementitious Composites by Advanced Non-Invasive Techniques
  28. Yuan Yong, Fatoyinbo Imoleayo, Sheng Ruiyi, Wang Qiling et al. (2025-02)
    Advancing the Applicability of Recycled Municipal Solid Waste Incineration Bottom Ash as a Cement Substitute in Printable Concrete:
    Emphasis on Rheological and Microstructural Properties
  29. Sangiorgio Valentino, Bianchi Iacopo, Forcellese Archimede (2025-02)
    Advancing Decarbonization Through 3D Printed Concrete Formworks:
    LIFE Cycle Analysis of Technologies, Materials, and Processes
  30. Khan Shoukat, Koç Muammer (2025-01)
    Advancements in Additively Manufactured Safety Materials:
    Energy-Efficient 3D Printing Solutions for Critical Infrastructure
  31. Nan Bo, Qiao Youxin, Leng Junjie, Bai Yikui (2025-01)
    Advancing Structural Reinforcement in 3D Printed Concrete:
    Current Methods, Challenges, and Innovations
  32. Silvestro Laura, Ribeiro Rodrigo, Navarrete Iván (2024-12)
    Advancements in Low Carbon-Emission Cements for 3D Printing:
    A State-of-the-Art Review
  33. Dams Barrie, Chen Binling, Kaya Yusuf, Shepherd Paul et al. (2024-11)
    The Rise of Aerial Additive Manufacturing in Construction:
    A Review of Material Advancements
  34. Nashed Kabalan Ola, Ciblac Thierry, Marceau Sandrine, Roy Robert (2024-11)
    Advancing Raw Earth Reinforcement for 3D Printed Architecture:
    Durability-Assessment
  35. Mikhalev Daniil, Fakhrayee Nejad Siamak, Ng Serina, Bose Baishakhi et al. (2024-09)
    Practical Insights and Advances in Concrete Pumping
  36. Dörfler Kathrin, Dielemans Gido, Leutenegger Stefan, Jenny Ercan et al. (2024-09)
    Advancing Construction in Existing Contexts:
    Prospects and Barriers of 3D Printing with Mobile Robots for Building Maintenance and Repair
  37. Colyn Markus, Babafemi Adewumi, Zijl Gideon (2024-09)
    Advancements in Sustainability of 3D Concrete Printing:
    Presenting Low-Carbon Mixtures for Additively Manufactured Concrete Structures in Practice
  38. Farra Ramzi, Dhers Sébastien, Silva Wilson (2024-09)
    Enhancing Early Strength in LC3 3DCP with Advanced Chemical Admixtures
  39. Aabbas Mohamed, Mahdaoui Mustapha, Ahachad Mohammed, Mazian Brahim et al. (2024-07)
    Advancing Sustainable Construction:
    Terracotta Component Development Through Extrusion-Based 3D Printing with Local Clay
  40. Sucharda Oldřich, Gandel Radoslav, Cmiel Petr, Jeřábek Jan et al. (2024-07)
    Utilization of High-Performance Concrete Mixtures for Advanced Manufacturing Technologies
  41. Malik Umair, Riaz Raja, Rehman Saif, Usman Muhammad et al. (2024-07)
    Advancing Mix-Design Prediction in 3D Printed Concrete:
    Predicting Anisotropic Compressive Strength and Slump-Flow
  42. Seifan Mostafa (2024-06)
    Sustainable Three-Dimensional Printing Concrete:
    Advances, Challenges, and Future Direction
  43. Quintana-Ruiz Osvaldo, Campello Eduardo (2024-06)
    DEM Modeling of Advanced Manufacturing Technologies:
    From SLS to 3D Concrete Printing
  44. Krishna R., Rehman Asif, Mishra Jyotirmoy, Saha Suman et al. (2024-06)
    Additive Manufacturing of Geopolymer Composites for Sustainable Construction:
    Critical Factors, Advancements, Challenges, and Future Directions
  45. Los Angeles Ortega Rosario Maria, Medina Melany, Duque Rafael, Alberto Jaén Ortega Antonio et al. (2024-05)
    Advancing Sustainable Construction:
    Insights into Clay-Based Additive Manufacturing for Architecture, Engineering, and Construction
  46. Capêto Ana, Jesus Manuel, Uribe Braian, Guimarães Ana et al. (2024-05)
    Building a Greener Future:
    Advancing Concrete Production Sustainability and the Thermal Properties of 3D Printed Mortars
  47. Hitzegrad Jan, Brohmann Leon, Herding Friedrich, Pfennings Kai et al. (2024-04)
    Surfaces of Coastal Biogenic Structures:
    Exploiting Advanced Digital Design and Fabrication-Strategies for the Manufacturing of Oyste-Reef- and Mussel-Bed-Surrogates
  48. Duarte Gonçalo, Duarte José, Watson Nathan, Bilén Sven et al. (2024-04)
    Advancing 3D Concrete Printing for Extreme Environments:
    A Focus on Alaska
  49. Zaid Osama, Ouni Mohamed (2024-04)
    Advancements in 3D Printing of Cementitious Materials:
    A Review of Mineral Additives, Properties, and Systematic Developments
  50. Radl Elisabeth, Pfleger Marc-Patrick, Karolyi Juliian, Vill Markus (2024-04)
    Specimen Design and Advanced Material-Testing for 3D Printing Concretes
  51. Bier Henriette, Hidding Arwin, Veer Frederic, Peternel Luka et al. (2024-04)
    Advancing Design-to-Robotic-Production and Assembly of Underground Habitats on Mars
  52. Akhnoukh Amin, Campbell Mathew (2024-04)
    Shoreline Resilience Through Advanced Manufacturing
  53. Gappmeier Peter, Reichenbach Sara, Kromoser Benjamin (2024-03)
    Advances in Formwork Automation, Structure and Materials in Concrete Construction
  54. Wu Dinglue, Luo Qiling, Long Wujian, Zhang Shunxian et al. (2024-02)
    Advancing Construction 3D Printing with Predictive Inter-Layer Bonding Strength:
    A Stacking Model Paradigm
  55. Figueiredo Karoline, Hammad Ahmed, Haddad Assed (2024-02)
    Concluding Overview:
    Advancements in Building Materials Technology
  56. Gamage Kumari, Fawzia Sabrina, Zahra Tatheer, Teixeira Muge et al. (2024-02)
    Advancement in Sustainable 3D Concrete Printing:
    A Review on Materials, Challenges, and Current Progress in Australia
  57. Raut Jayant, Pimpalshende Anjusha, Chandak Mayuri, Patil Tejas et al. (2024-01)
    A Novel Multi-Method Framework for 3D Printed Fiber-Reinforced Polymer Concrete Utilizing Advance Additive Manufacturing Techniques
  58. Panda Biranchi, Shakor Pshtiwan, Lagaros Nikos (2023-12)
    Advanced Modelling for Additive Manufacturing in Construction
  59. Tabassum Nusrat, Duarte José, Nazarian Shadi (2023-11)
    Advancing 3D Concrete Printing for Affordable Housing:
    A Shape Grammar-Based Approach to Print Spanning-Roof Structures
  60. Zhou Yi, Althoey Fadi, Alotaibi Badr, Gamil Yaser et al. (2023-10)
    An Overview of Recent Advancements in Fiber-Reinforced 3D Printing Concrete
  61. Mata-Falcón Jaime, Gebhard Lukas, Lee Minu, Bischof Patrick (2023-10)
    Advances in Structural Applications of Digital Fabrication With Concrete
  62. Zhang Hanghua, Hao Lucen, Zhang Shipeng, Xiao Jianzhuang et al. (2023-08)
    Advanced Measurement Techniques for Plastic Shrinkage and Cracking in 3D Printed Concrete Utilising Distributed Optical Fiber Sensor
  63. Arrêteau Manon, Fabien Aurélie, Haddaji Badreddine, Chateigner Daniel et al. (2023-07)
    Review of Advances in 3D Printing Technology of Cementitious Materials:
    Key Printing Parameters and Properties Characterization
  64. Tu Haidong, Wei Zhenyun, Bahrami Alireza, Kahla Nabil et al. (2023-06)
    Recent Advancements and Future Trends in 3D Printing Concrete Using Waste-Materials
  65. Lamnini Soukaina, Elsayed Hamada, Lakhdar Yazid, Baino Francesco et al. (2022-09)
    Robocasting of Advanced Ceramics:
    Ink-Optimization and Protocol to Predict the Printing Parameters
  66. Uribe-Pinzon Sebastian, Mosquera Mariana, Cardenas-Pulido Jhon, Higuera Camilo (2021-10)
    Advances and Current Trends on the Use of 3D Printed Concrete for Building Fabrication
  67. Guimarães Ana, Delgado João, Lucas Sandra (2021-07)
    Advanced Manufacturing in Civil Engineering
  68. Makul Natt (2020-07)
    Advanced Smart Concrete:
    A Review of Current Progress, Benefits and Challenges
  69. Odaglia Pietro, Voney Vera, Dillenburger Benjamin, Habert Guillaume (2020-07)
    Advances in Binder-Jet 3D Printing of Non-Cementitious Materials
  70. Roussel Nicolas, Bessaies-Bey Hela, Kawashima Shiho, Marchon Delphine et al. (2019-08)
    Recent Advances on Yield-Stress and Elasticity of Fresh Cement-Based Materials
  71. Kajzr Daniel, Beran Leoš, Záda Václav (2017-10)
    Development of a Robotic Arm Suitable for Demonstration of Advanced Control Methods
  72. Vasilić Ksenija, Geiker Mette, Hattel Jesper, Martinie Laetitia et al. (2014-03)
    Advanced Methods and Future Perspectives
  73. Helm Volker, Willmann Jan, Gramazio Fabio, Kohler Matthias (2013-11)
    In-Situ Robotic Fabrication:
    Advanced Digital Manufacturing Beyond the Laboratory
  74. Khoshnevis Behrokh, Thangavelu Madhu, Yuan Xiao, Zhang Jing (2013-09)
    Advances in Contour Crafting Technology for Extraterrestrial Settlement Infrastructure Buildup