#solid
Keywords by Co - Occurrence
- Kiyani Muhammad, Kamal Muhammad, Hussain Syed, Emaan Rajja et al. (2026-01)
A Novel Arch Infill for 3D Concrete Printed Beams:
A Comparative Study of Flexural Performance Against Truss and Solid Designs
- Zhang Jiao-Long, Yuan Yong, Fatoyinbo Imoleayo, Zhou Lujie et al. (2025-11)
3D-Printable Mortars Incorporating Municipal Solid Waste Incineration Bottom Ash:
Linking Hydration to Extrudability and Mechanical Performance
- Lu Qi, Hua Sudong, Yue Hongfei (2025-11)
Effect of Spherical Electric Arc Slag on Solid Waste-Based 3D-Printed Concrete
- Lale Erol, Ayhan Bahar, Ahmed Ayesha, Irizarry Elmer et al. (2025-10)
Computational Simulations Fresh-to-Solid Transition for Additive Manufacturing of Ultra-High-Performance Fiber Reinforced Concrete
- Li Nan, Deng Yongjie, Li Weihong, Li Lingyu et al. (2025-08)
Performance of Active-Magnesia-Based Magnesium Phosphate Cement and Application of Rapid-Solidification 3D Printing Technology
- Pan Keheng, Cheng Yinhan, Qu Guangfei, Yuan Zheng et al. (2025-07)
Development and Optimization of Geopolymer-Based 3D Printing Materials Utilizing Industrial Solid Waste:
Rheological Properties and Practical Applications
- Rousan Rajai, Alnemrawi Bara'a, Abdalla Khairedin, Alhassan Mohammad et al. (2025-06)
The Flexural Behavior of Engineered Cementitious Composites (ECC) One-Way 3D Printed Slabs Made of Solid and Hollow Sections
- Liang Yingming, He Jincheng, Niu Like, Chen Junwei et al. (2025-05)
Experimental Study on Printability of Solid Waste Concrete Based on 3D Printing Technology
- Shen Jianyu, Ye Taohua, Xiao Jianzhuang, Li Shuisheng (2025-04)
Mechanical and Thermal Properties of 3D Printed Earth Concrete Solidified by Geopolymers:
A Study of Utilizing Excavated Clay
- Ali Shah Syed, Zhang Shipeng, Xuan Dongxing, Poon Chi (2025-04)
Development of a Novel Mixing Strategy for Set-on-Demand Printing of One-Part Geopolymer Using Municipal Solid Waste Incineration Bottom Ash and Blast Furnace Slag
- Li Yifan, Chen Shuisheng, Yang Liuhua, Guo Chuan et al. (2025-02)
Investigation of the Impact of Material Rheology on the Interlayer Bonding Performance of Solid Waste 3D-Printed Components
- Yuan Yong, Fatoyinbo Imoleayo, Sheng Ruiyi, Wang Qiling et al. (2025-02)
Advancing the Applicability of Recycled Municipal Solid Waste Incineration Bottom Ash as a Cement Substitute in Printable Concrete:
Emphasis on Rheological and Microstructural Properties
- Alós Shepherd David, Dehn Frank, Kuhn Alexander, Degen Robin et al. (2025-01)
3D Concrete Printing of Solid Wall Cross-Sections with Truckmounted Concrete Pump:
A Report on the First Printed Structure in Germany
- Zhao Hongyu, Wang Yufei, Liu Xianda, Wang Xiangyu et al. (2024-12)
Review on Solid Wastes Incorporated Cementitious Material Using 3D Concrete Printing Technology:
Corrigendum
- Kruger Jacques, Zijl Gideon (2024-11)
A Structural Engineering Perspective on Extrusion-Based 3D Concrete Printing:
From Green to Solid State
- Zhao Wanting, Zhao Yu, Zhu Lingli, Guan Xuemao (2024-10)
Preparation of 3D Printed Concrete from Solid Waste:
Study of the Relationship Between Steel-Slag Characteristics and Early Performance in 3D Printing
- Remke Sebastian, Kandy Sharu, Sant Gaurav, Gädt Torben (2024-09)
A Hybrid Binder Concept for a Swift Liquid-to-Solid Transition in 3D Printing of Suspensions
- Zhao Hongyu, Wang Yufei, Liu Xianda, Wang Xiangyu et al. (2024-08)
Review on Solid Wastes Incorporated Cementitious Material Using 3D Concrete Printing-Technology
- Boddepalli Uday, Panda Biranchi, Gandhi Indu (2024-07)
Impact of Water to Solids Ratio on Stability, Printability, and Mechanical Characteristics of 3D Printable Foam-Concrete
- Reinold Janis, Daadouch Koussay, Meschke Günther (2023-11)
Numerical Simulation of Three Dimensional Concrete Printing Based on a Unified Fluid and Solid Mechanics Formulation
- Zhang Xiaowei, Guo Chuwen, Ma Jianhong, Jiao Huazhe et al. (2023-10)
Utilization of Solid Mine-Waste in the Building Materials for 3D Printing
- Yue Hongfei, Zhang Zhuxian, Hua Sudong, Gao Yanan et al. (2023-09)
Solid Waste-Based Set-on-Demand 3D Printed Concrete:
Active Rheological-Control of Cement-Based Magneto-Rheological Fluids
- Xu Zhuoyue, Zhang Dawang, Li Hui, Sun Xuemei (2023-02)
Effects of the Distribution of Solid Particles on the Rheological Properties and Buildability of 3DPM Fresh Pastes with Different FA/GGBFS Content
- Li Xiao-Sheng, Li Long, Zou Shuai (2023-02)
Developing Low-pH 3D Printing Concrete Using Solid Wastes
- Shen Yuhang, Lin Li, Wei Shengjie, Yan Jie et al. (2022-12)
Research on the Preparation and Mechanical Properties of Solidified 3D Printed Concrete Materials
- Ren Chuangnan, Hua Dongliang, Bai Yonghui, Wu Shuang et al. (2022-06)
Preparation and 3D Printing Building Application of Sulfoaluminate-Cementitious-Material Using Industrial Solid-Waste
- Rodriguez Fabian, Olek Jan, Moini Mohamadreza, Zavattieri Pablo et al. (2021-11)
Linking Solids Content and Flow Properties of Mortars to Their Three-Dimensional Printing Characteristics
- Bai Gang, Wang Li, Ma Guowei, Sanjayan Jay et al. (2021-03)
3D Printing Eco-Friendly Concrete Containing Under-Utilised and Waste Solids as Aggregates
- Grünewald Steffen, Schipper Roel (2020-07)
Transition from Fluid to Solid Concrete in the Flexible Mould Process
- Shahzad Qamar, Wang Xujiang, Wang Wenlong, Wan Yi et al. (2020-06)
Coordinated Adjustment and Optimization of Setting-Time, Flowability, and Mechanical Strength for Construction 3D Printing Material Derived from Solid Waste
- Rehman Atta, Lee Sang-Min, Kim Jung-Hoon (2020-06)
Use of Municipal Solid-Waste Incineration-Ash in 3D Printable Concrete
- Ma Guowei, Sun Junbo, Wang Li, Aslani Farhad et al. (2018-09)
Electromagnetic and Microwave-Absorbing Properties of Cementitious Composite for 3D Printing Containing Waste Copper Solids
- Zhou Xiangming, Li Zongjin, Fan Mizi, Chen Huapeng (2013-01)
Rheology of Semi-Solid Fresh Cement-Pastes and Mortars in Orifice-Extrusion
- Pegna Joseph (1997-02)
Exploratory Investigation of Solid Freeform Construction