Skip to content

#hybrid

Keywords by Co - Occurrence

  1. Tinoco Matheus, Lima Moura Paiva Rayane, Andrade Luiza, Mendoza Reales Oscar (2025-12)
    Hybrid 3D Printable Mixtures Incorporating Fine Earth, Portland Cement, and Fly Ash:
    A Sustainable Alternative to Cement-Intensive Systems
  2. Feng Xiaowei, Carvelli Valter, Pan Dongjiang, Zhu Chuankai et al. (2025-12)
    Additive Manufacturing of Hybrid Straw-Soil-Cement Materials for Enhanced Mine Models
  3. Vargas José, Breseghello Luca, Silfwerbrand Johan (2025-11)
    Circular Hybrid Façades:
    Responsive Design of Thermally Efficient 3D Printed Concrete Skins on Reused Concrete Elements
  4. Raza Ali, Tan Binglin, Jiajia Zhou, Umar Muhammad et al. (2025-11)
    Evaluation of Mechanical and Microstructural Properties of Sustainable 3D-Printed Engineered Cementitious Composites Incorporating Hybrid PE/PVA Fibers and Yellow River Sand
  5. Changez Kashif, Aslam Jawad, Bhutta Muhammad, Butt Shahid (2025-11)
    Hybrid Additive Strategies for Sustainable 3D Concrete Printing:
    Balancing Printability, Early-Stage Strength, and Eco-Efficiency
  6. Abedi Mohammadmadhi, Waris Muhammad, Alawi Mubarak, Jabri Khalifa (2025-10)
    Next-Generation Net-Zero Composite for Underwater 3D Printing Construction:
    Hybrid Machine Learning Optimized LC3 with Recycled Rubber
  7. Teng Fei, Yang Minxin, Yu Jie, Weng Yiwei et al. (2025-10)
    Multi-Material 3D Concrete Printing:
    Automated Hybrid Reinforcements Using Textile and Strain-Hardening Cementitious Composites
  8. Ye Htun Thet, Panuwatwanich Kriengsak, Tanapornraweekit Ganchai, Jongvisuttisun Passarin et al. (2025-10)
    Carbon Emission Assessment of 3D Printed Hybrid Modular Concrete Building:
    Work Breakdown Structure
  9. Rudziewicz Magdalena, Maroszek Marcin, Hebda Marek (2025-09)
    Comparison of Porosity and Thermal Conductivity of Concrete and Alkali-Activated Hybrid Binders in 3D-Printed Fiber-Reinforced Foamed Composites
  10. Zhou Juanlan, Shi Xiangwen, Zheng Hongrun, Jin Ruoyu et al. (2025-09)
    Investigating the Effects of Hybrid PVA/BF Fibers in Low-Carbon 3D Printed Concrete with Recycled Aggregates:
    Rheology, Strength, and Anisotropy
  11. Sari Mustika, Berawi Mohammed, Taswin William, Saroji Gunawan et al. (2025-09)
    Work Breakdown Structure and Construction Process Framework for a Hybrid 3D-Printed Modular Building
  12. Liu Shijie, Liu Tong, Alqurashi Muwaffaq, Abdou Elabbasy Ahmed et al. (2025-09)
    Advancing 3D-Printed Fiber-Reinforced Concrete for Sustainable Construction:
    A Comparative Optimization Based Study of Hybrid Machine Intelligence Models for Predicting Mechanical Strength and CO₂ Emissions
  13. Saelens Lien, Tittelboom Kim, Wan-Wendner Roman, Caspeele Robby (2025-07)
    Experimental and Numerical Quantification of the Structural Capacity of Hybrid 3D Printed and Cast Concrete Beams After Topology Optimization
  14. Nandurkar Bhupesh, Raut Jayant, Hinge Pawan, Bahoria Boskey et al. (2025-06)
    Multi-Scale Deep Learning Framework for Three Dimensional Printed Self-Sensing Cementitious Composites with Hybrid Nano-Carbon Fillers
  15. Zhao Yu, Shen Guanghai, Zhu Lingli, Ding Yahong et al. (2025-06)
    Enhancing Interfacial Bonding and Pore Structure Optimization in 3D-Printed High-Strength ECC with Steel-PE Hybrid Fibers
  16. Saelens Lien, Tittelboom Kim, Caspeele Robby, Wan-Wendner Roman (2025-06)
    Experimental Analysis of the Structural Behavior of Hybrid Concrete 3D Printed-Cast Beam Systems
  17. Alizamir Meysam, Kim Sungwon, Ikram Rana, Ahmed Kaywan et al. (2025-06)
    A Reliable Hybrid Extreme Learning Machine-Metaheuristic Framework for Enhanced Strength Prediction of 3D-Printed Fiber-Reinforced Concrete
  18. Dobrzanski James, Xu Jie, Bartek Rasti, Becker Daniel et al. (2025-04)
    From Digital Crafting to Digital Manufacturing:
    Automated Production Using Hybrid 3D Concrete Printing
  19. Liu Han, Laflamme Simon, Cai Bin, Lyu Ping et al. (2024-11)
    Investigation of 3D Printed Self-Sensing UHPC Composites Using Graphite and Hybrid Carbon Microfibers
  20. Ali Mohd, Rub Rashid, Banat Fawzi, Kim Tae-Yeon (2024-11)
    Enhancing the Printing Quality and Mechanical Properties of 3D Printed Cement Composites with Date-Syrup-Based Graphene-Coated-Sand Hybrid
  21. Hack Norman, Dörrie Robin, Kloft Harald (2024-11)
    Hybrid Additive Manufacturing
  22. Wang Li, Lin Wenyu, Wan Qian, Li Zhijian et al. (2024-11)
    Manufacturing Accuracy Improvement of Concrete Product by Hybrid Additive-Subtractive Method Based on the Time-Dependent Characteristics of Cementitious Materials
  23. Nasr Ahmed, Duan Zhenhua, Singh Amardeep, Yang Min et al. (2024-11)
    Enhancing Mechanical Properties of 3D Printed Cementitious Composites Utilizing Hybrid Recycled PP and PET-Fibers
  24. Carvalho João, Figueiredo Bruno, Cruz Paulo (2024-11)
    Ceramic AM and Beyond:
    The Potential of Hybrid Construction Systems
  25. Ding Yao, Ou Xingjian, Qi Hongtuo, Xiong Gang et al. (2024-10)
    Inter-Layer Bonding Performance of 3D Printed Engineered Cementitious Composites:
    Rheological Regulation and Fiber Hybridization
  26. Krakovská Ema, Briels David, Straßer Alexander, Kränkel Thomas et al. (2024-09)
    Functionally Hybridised Lightweight Concrete Components:
    Monolithic Building Construction Using Selective Paste-Intrusion
  27. Remke Sebastian, Kandy Sharu, Sant Gaurav, Gädt Torben (2024-09)
    A Hybrid Binder Concept for a Swift Liquid-to-Solid Transition in 3D Printing of Suspensions
  28. Meibodi Mania, Lin Yuxin, Chen Hao (2024-09)
    Hybrid Approaches Towards 3D Concrete Printing for Lightweight Reinforced Concrete Structures
  29. Hou Shaodan, Wu Wenbo, Duan Zhenhua, Zhou Shuai et al. (2024-09)
    Rheology of Fiber-Reinforced Mortar for 3D Printing Construction:
    Effect of Recycled Hybrid-Powder and Polyethylene-Fiber
  30. Hanifa Mohamad, Figueiredo Bruno, Mahdy Deena, Mendonça Paulo et al. (2024-08)
    Continuum Optimization of 3D Printed Self-Supported Shell:
    Hybrid Strategy for Crafting Ribbed System
  31. Ding Yao, Liu Jiepeng, Ou Xingjian, Nishiwaki Tomoya et al. (2024-08)
    3D Printing Hybrid-Fiber-Reinforced Engineered Cementitious Composites:
    Feasibility in Long-Open-Time Applications
  32. Ramakrishnan Sayanthan, Pasupathy Kirubajiny, Mechtcherine Viktor, Sanjayan Jay (2024-07)
    Two-Part Print-Head Mixing of Hybrid Alkali-Activated Cement for Buildability Enhancement in 3D Concrete Printing
  33. Basha Shaik, Nugraha Joshua, Rehman Atta, Choi Kichang et al. (2024-06)
    Structuration and Yield Strength Characterization of Hybrid Alkali-Activated Cement Composites for Ultra-Rapid 3D Construction Printing
  34. Ramakrishnan Sayanthan, Pasupathy Kirubajiny, Mechtcherine Viktor, Sanjayan Jay (2024-05)
    Print-Head Mixing of Geopolymer and OPC Slurries for Hybrid Alkali-Activated Cement in 3D Concrete Printing
  35. Fleckenstein Julia, Knychalla Bruno, Briels David, Baghdadi Abtin et al. (2024-04)
    BREUER × AM:
    Functional Hybridisation in Concrete Building Envelope Elements through Additive Manufacturing
  36. Remke Sebastian, Sant Gaurav, Gädt Torben (2023-12)
    Investigation of a Hybrid Binder System for Large-Scale 3D Printing
  37. Beersaerts Glenn, Soete Jeroen, Giels Michiel, Eykens Lies et al. (2023-09)
    3D Printing of an Iron-Rich Slag-Based Hybrid Mortar:
    A Durable, Sustainable and Cost-Competitive Product?
  38. Robayo-Salazar Rafael, Martínez Fabio, Vargas Armando, Gutiérrez Ruby (2023-06)
    3D Printing of Hybrid Cements Based on High Contents of Powders from Concrete, Ceramic and Brick Waste Chemically Activated with Sodium Sulphate (Na2SO4)
  39. Beersaerts Glenn, Hertel Tobias, Lucas Sandra, Pontikes Yiannis (2023-02)
    Promoting the Use of Fe-Rich Slag in Construction:
    Development of a Hybrid Binder for 3D Printing
  40. Cao Xiangpeng, Yu Shiheng, Wu Shuoli, Cui Hongzhi (2022-11)
    Experimental Study of Hybrid Manufacture of Printing and Cast-in-Process to Reinforce 3D Printed Concrete
  41. Marczyk Joanna, Ziejewska Celina, Korniejenko Kinga, Łach Michał et al. (2022-09)
    Properties of 3D Printed Concrete-Geopolymer Hybrids Reinforced with Aramid Roving
  42. Bi Minghao, Xia Lingwei, Tran Jonathan, Li Zhi et al. (2022-04)
    Continuous Contour-Zigzag Hybrid Tool-Path for Large-Format Additive Manufacturing
  43. Ziejewska Celina, Marczyk Joanna, Korniejenko Kinga, Bednarz Sebastian et al. (2022-04)
    3D Printing of Concrete-Geopolymer Hybrids
  44. Buswell Richard, Xu Jie, Becker Daniel, Dobrzanski James et al. (2022-04)
    Geometric Quality Assurance for 3D Concrete Printing and Hybrid Construction Manufacturing Using a Standardised Test Part for Benchmarking Capability
  45. Rennen Philipp, Khader Noor, Hack Norman, Kloft Harald (2021-11)
    A Hybrid Additive Manufacturing Approach:
    Combining Additive Manufacturing and Green-State Concrete Milling to Create a Functionally Integrated Loadbearing Concrete Panel System
  46. Marczyk Joanna, Ziejewska Celina, Gądek Szymon, Korniejenko Kinga et al. (2021-11)
    Hybrid Materials Based on Fly-Ash, Metakaolin, and Cement for 3D Printing
  47. Muñiz Manuel, Chantin Marjorie, Vintila Cristian, Fabritius Marc et al. (2021-02)
    Concrete Hybrid Manufacturing:
    A Machine Architecture
  48. Douba AlaEddin, Chan Clare, Berrios Stephanie, Kawashima Shiho (2020-07)
    Synthesis of Hybridized Rheological Modifiers for 3D Concrete Printing
  49. Mostafavi Sina, Kemper Benjamin, Du Chong (2019-08)
    Materializing Hybridity in Architecture:
    Design to Robotic Production of Multi-Materiality in Multiple Scales