#computer¶

Keywords by Co - Occurrence¶

#print (39) #concrete (28) #base (12) #vision (12) #cement (9)

1. García-Alvarado Rodrigo, Soza-Ruiz Pedro, Valenzuela-Astudillo Eduardo (2026-04)
   Parametric Form-Finding for 3D-Printed Housing:
   A Computational Workflow from Generative Exploration to Architectural Development
2. Han Seongho, Ahn Eunjong, Shin Myoungsu, Popovics John et al. (2025-12)
   Methodology for Surface Defect Assessment in 3D Concrete Printing Using Computer-Vision and Ultrasonic Testing Considering Structural Build-Up
3. Kim Yoon-Chul, Han Tong-Seok (2025-10)
   Buildability Analysis in 3D Concrete Printing Using Computer Vision and Automated Annotation
4. Lale Erol, Ayhan Bahar, Ahmed Ayesha, Irizarry Elmer et al. (2025-10)
   Computational Simulations Fresh-to-Solid Transition for Additive Manufacturing of Ultra-High-Performance Fiber Reinforced Concrete
5. Bai Meiyan, Xiao Jianzhuang, Ding Tao, Chen Weihua (2025-09)
   Integrated Non-Destructive Assessment of 3D Printed UHPC Microstructure Using X-Ray Computed Tomography and Ultrasonic Waves
6. Xing Wenjing, Li Zhengrong (2025-09)
   Quantifying the Heterogeneous Anisotropic Thermal Performance of Extrusion-Based 3D Printed Structures:
   A Multiscale Computational Approach
7. Bhagat Rajesh, Pande Prashant, Madurwar Kamlesh, Raut Jayant et al. (2025-09)
   Life Cycle Assessment of 3D-Printed Building Materials Towards Sustainability-Driven Optimization and Environmental Impact Analysis Using Computational Intelligence Techniques
8. Lian Hongqian, Ding Tao (2025-09)
   Deformation of Inclined Concrete 3D Printing:
   A Computational Fluid Dynamics Analysis
9. Liu Zhixin, Si Liang, Liu Yebao, Li Mingyang et al. (2025-08)
   Optimization of Printing Parameters Based on Computational Fluid Dynamics for Uniform Filament Mass Distribution at Corners in 3D Cementitious Material Printing
10. Cai Lixiong, Chen Feida, Xie Dingkun, Ye Keming (2025-05)
    Time-Varying Work Performance of Cementitious 3D Printing Mortar:
    Effect of SAC, H-PC and HPMC
11. Asif Usama (2025-05)
    Comparative Analysis of Evolutionary Computational Methods for Predicting Mechanical Properties of Fiber-Reinforced 3D Printed Concrete
12. Liu Wenliang, Ji Dongsheng, Cui Weijiu, Shi Xinyu et al. (2025-05)
    Research Progress on Quality Control Method of Concrete 3D Printing Based on Computer Vision
13. Liu Junli, Hai Hoang, Tran Mien, Tran Jonathan (2025-04)
    Advancing Microstructural Insights in 3D-Printed Cementitious Materials via X-Ray Micro-Computed Tomography
14. Liu Zhenbang, Li Mingyang, Wang Xiangyu, Wong Teck et al. (2025-03)
    Investigate Mechanisms of Different Printing Parameters on the Mechanical Anisotropy of 3D Concrete Printing Elements by Using Computed Tomography Scan and Computational Fluid Dynamics Methods
15. Cui Weijiu, Liu Wenliang, Guo Ruyi, Da Wan et al. (2025-02)
    Geometrical Quality Inspection in 3D Concrete Printing Using AI-Assisted Computer Vision
16. Nan Cristina (2024-09)
    The Computational Clay Column:
    Computational Ceramic Systems with Additive Manufacturing
17. Zhang Hanghua, Hao Lucen, Zhang Shipeng, Xiao Jianzhuang et al. (2024-09)
    Real-Time Monitoring and Feedback Operation System for 3D Printed Concrete Based on Computer-Vision
18. Haripan Vislavath, Senthilnathan Shanmugaraj, Gettu Ravindra, Santhanam Manu et al. (2024-09)
    Open-Time and Extrudability-Performance-Analysis of 3D Printed Concrete with Recycled Concrete Fine Aggregates Using Rheological- and Computer-Vision-Techniques
19. Bier Henriette, Hidding Arwin, Lewandowska J., Calabrese Giuseppe (2024-09)
    Developing a Computer-Vision Application for Crack Detection
20. Kladovasilakis Nikolaos, Pemas Sotirios, Pechlivani Eleftheria (2024-07)
    Computer-Aided Design of 3D Printed Clay-Based Composite Mortars Reinforced with Bio-Inspired Lattice Structures
21. Cui Weijiu, Sun Haijun, Zhou Jiangang, Wang Sheng et al. (2024-07)
    Geometric Quality Evaluation of Three-Dimensional Printable Concrete Using Computational Fluid Dynamics
22. Senthilnathan Shanmugaraj, Raphael Benny (2024-06)
    Buildability-Assessment of 3D Printed Concrete Elements Through Computer-Vision
23. Abbaoui Khalid, Korachi Issam, Jai Mostapha, Šeta Berin et al. (2024-04)
    3D Concrete Printing Using Computational Fluid Dynamics:
    Modeling of Material-Extrusion with Slip-Boundaries
24. Nóbrega Anna, Queiroz Junior Cleanto, Souza Wendell, Cabral Kleber et al. (2024-02)
    Computational Modeling for Structural Element Analysis Using Cement Composites in 3D Printing
25. Rennen Philipp, Gantner Stefan, Dielemans Gido, Bleker Lazlo et al. (2023-12)
    Robotic Knitcrete:
    Computational Design and Fabrication of a Pedestrian Bridge Using Robotic Shotcrete on a 3D Knitted Formwork
26. Eversmann Philipp, Rossi Andrea (2023-11)
    Towards Construction 4.0:
    Computational Circular Design and Additive Manufacturing for Architecture Through Robotic Fabrication with Sustainable Materials and Open-Source Tools
27. Mollah Md., Comminal Raphaël, Silva Wilson, Šeta Berin et al. (2023-07)
    Computational Fluid Dynamics Modelling and Experimental Analysis of Reinforcement-Bar-Integration in 3D Concrete Printing
28. Senthilnathan Shanmugaraj, Raphael Benny (2023-07)
    Quality Monitoring of Concrete 3D Printed Elements Using Computer-Vision-Based Texture Extraction Technique
29. Mollah Md., Comminal Raphaël, Serdeczny Marcin, Šeta Berin et al. (2023-05)
    Computational Analysis of Yield-Stress-Buildup and Stability of Deposited Layers in Material-Extrusion Additive Manufacturing
30. Hanifa Mohamad, Figueiredo Bruno, Mendonça Paulo (2023-04)
    Additive Manufacturing Earth-Based Composite:
    Strategical and Computational Methodology for Building-Shell-Geometries
31. Salam Mohammad Abdul, Biernacki Joseph (2023-04)
    2D Stationary Computational Printing of Cement-Based Pastes with Time-Dependent Rheology
32. Reinold Janis, Gudžulić Vladislav, Meschke Günther (2023-03)
    Computational Modeling of Fiber Orientation During 3D Concrete Printing
33. Daadouch Koussay, Reinold Janis, Gudžulić Vladislav, Meschke Günther (2023-03)
    Computational Modeling of Fiber Orientation During 3D Concrete Printing
34. Zahrani Abdullah, Alghamdi Abdulrahman, Basalah Ahmad (2022-12)
    Computational Optimization of 3D Printed Concrete Walls for Improved Building Thermal Performance
35. Senthilnathan Shanmugaraj, Raphael Benny (2022-11)
    Using Computer-Vision for Monitoring the Quality of 3D Printed Concrete Structures
36. García Rodrigo, Dokladalova Eva, Dokládal Petr, Caron Jean-François et al. (2022-09)
    In-Line Monitoring of 3D Concrete Printing Using Computer-Vision
37. Meschke Günther, Neu Gerrit, Gudžulić Vladislav, Reinold Janis et al. (2022-09)
    Computational Modeling of FRC:
    From 3D Printing to Robust Design
38. Mohammad Abdul, Biernacki Joseph (2022-06)
    2D Stationary Computational Printing of Cement-Based Pastes
39. Shkundalova Olena, Molkens Tom, Claßen Martin, Rossi Barbara (2022-05)
    Computational Modelling of Material-Behavior of Layered 3D Printed Concrete
40. Tavangar Tooran, Hosseinpoor Masoud, Yahia Ammar, Khayat Kamal (2021-11)
    Computational Investigation of Concrete-Pipe-Flow:
    Critical Review
41. Moini Mohamadreza, Baghaie Ahmadreza, Rodriguez Fabian, Zavattieri Pablo et al. (2021-06)
    Quantitative Microstructural Investigation of 3D Printed and Cast Cement-Pastes Using Micro-Computed Tomography- and Image-Analysis
42. Marais Hannelie, Christen Heidi, Cho Seung, Villiers Wibke et al. (2021-03)
    Computational Assessment of Thermal Performance of 3D Printed Concrete Wall Structures with Cavities
43. Chen Yu, Çopuroğlu Oğuzhan, Rodríguez Claudia, Filho Fernando et al. (2021-02)
    Characterization of Air-Void Systems in 3D Printed Cementitious Materials Using Optical Image Scanning and X-Ray Computed Tomography
44. Nguyen Vuong, Panda Biranchi, Zhang Guomin, Nguyen-Xuan Hung et al. (2021-01)
    Digital Design Computing and Modelling for 3D Concrete Printing
45. Comminal Raphaël, Silva Wilson, Andersen Thomas, Stang Henrik et al. (2020-10)
    Modelling of 3D Concrete Printing Based on Computational Fluid Dynamics
46. He Rui, Li Mingkai, Gan Vincent, Ma Jun (2020-08)
    BIM-Enabled Computerized Design and Digital Fabrication of Industrialized Buildings:
    A Case Study
47. Gardner Guy, Forward Kristen, Tse Kim, Sharma Karan (2020-07)
    Rapid Composite Formwork:
    An Automated and Customizable Process for Freeform Concrete Through Computational Design and Robotic Fabrication
48. Zuo Wenqiang, Keita Emmanuel, Bornert Michel, Roussel Nicolas (2020-07)
    Drying of 3D Printed Mortar Filaments at Early-Age Assessed by X-Ray Computed Tomography
49. Lee Hojae, Kim Jang-Ho, Moon Jae-Heum, Kim Won-Woo et al. (2019-08)
    Correlation Between Pore Characteristics and Tensile Bond Strength of Additive Manufactured Mortar Using X-Ray Computed Tomography
50. Hosseini Ehsan, Zakertabrizi Mohammad, Korayem Asghar, Xu Guanzhong (2019-03)
    A Novel Method to Enhance the Inter-Layer Bonding of 3D Printing Concrete:
    An Experimental and Computational Investigation
51. Kazemian Ali, Yuan Xiao, Davtalab Omid, Khoshnevis Behrokh (2019-01)
    Computer-Vision for Real-Time Extrusion-Quality-Monitoring and Control in Robotic Construction
52. Meibodi Mania, Jipa Mihail-Andrei, Giesecke Rena, Shammas Demetris et al. (2018-10)
    Smart Slab:
    Computational Design and Digital Fabrication of a Lightweight Concrete Slab
53. Moini Mohamadreza, Olek Jan, Magee Bryan, Zavattieri Pablo et al. (2018-09)
    Additive Manufacturing and Characterization of Architectured Cement-Based Materials via X-Ray Micro-Computed Tomography
54. Zuo Zibo, Gong Jian, Huang Yulin (2017-07)
    Performance of 3D Printing in Construction by Using Computer-Control-Technology
55. Duro-Royo Jorge, Mogas-Soldevila Laia, Oxman Neri (2015-06)
    Flow-Based Fabrication:
    An Integrated Computational Workflow for Design and Digital Additive Manufacturing of Multifunctional Heterogeneously Structured Objects
56. Thrane Lars, Brás Ana, Bakker Paul, Brameshuber Wolfgang et al. (2014-03)
    Computational Fluid Dynamics