Skip to content

#component

Keywords by Co - Occurrence

  1. Vargas Juan, Cárdenas Valeria, Serra Valentina, Callegari Guido et al. (2026-01)
    DfAM Framework for Prefabricated 3DP Building Components with Cellular Infills
  2. Wang Hanmo, Wan Yujia, Owyong Shawn, Connie Lim En et al. (2026-01)
    Towards Low-Carbon Construction:
    Nature-Inspired Internal Patterns for Thermal Insulation in Lightweight Concrete Component Cast Using 3D-Printed Formwork
  3. Alvarez Eduardo, Curth Alexander, Mueller Caitlin, Norford Leslie (2026-01)
    Enhancing the Dynamic Thermal Performance of Wall Components Through Shape Optimization:
    Method and Application to Extruded Blocks and 3D-Printed Walls
  4. Cárdenas Valeria, Vargas Juan, Fantucci Stefano (2025-12)
    Topological Optimization and Material Exploration for Improving the Thermal Performance of 3D Printed Prefabricated Wall Components
  5. Abbas Yassir, Alsaif Abdulaziz (2025-11)
    Explainable Data-Driven Modeling for Optimized Mix Design of 3D-Printed Concrete:
    Interpreting Nonlinear Synergies Among Binder Components and Proportions
  6. Xia Chen, Lee Chang, Leifer Max, Zheng Bujingda (2025-11)
    Additive Reinforced Concrete for Multifunctional Construction Component
  7. Zhao Yu, Shen Guanghai, Zhu Lingli, Ding Yahong et al. (2025-11)
    Multi-Scale Analysis of 3D Printable High-Strength Engineered Cementitious Composite with Carbon and Polyethylene Fibers:
    Rheology, Printability and Hydration Kinetics in Structural Components
  8. Zhi Yefan, Akbarzadeh Masoud (2025-10)
    Surface-Toolpath Twins of Shell Components in 3D Concrete Printing for Optimized Buildability and Surface Quality
  9. Liu Han, Sousa Israel, Laflamme Simon, Doyle Shelby et al. (2025-09)
    Embedment of 3D Printed Self-Sensing Composites for Smart Cementitious Components
  10. Maroszek Marcin, Rudziewicz Magdalena, Hebda Marek (2025-09)
    Recycled Components in 3D Concrete Printing Mixes:
    A Review
  11. Wang Xiaoqi, Zuo Tianyi, Xu Yanling, Liu Xing et al. (2025-06)
    Reinforcement Learning-Based Continuous Path Planning and Automated Concrete 3D Printing of Complex Hollow Components
  12. Ding Tao, Qu Changwei, Guo Dingming (2025-06)
    Thermal and Mechanical Properties of 3D Printed Functionally Graded Concrete:
    Utilizing Fibers and Recycled Aggregates as Gradient Components
  13. Zhou Zhuang, Shi Xinyu, Zhou Haining, Liang Yuan et al. (2025-05)
    Research on 3DPC Construction Method for Structural High-Performance Component Generation
  14. Chen Zhaohui, Yue Ziyi, Gerong Wangdui, Wang Zhenyue et al. (2025-05)
    Effect of Orthotropy and Printing Patterns on the Bending Performance of 3D Printed Concrete Grid Components
  15. Li Yifan, Chen Shuisheng, Yang Liuhua, Guo Chuan et al. (2025-02)
    Investigation of the Impact of Material Rheology on the Interlayer Bonding Performance of Solid Waste 3D-Printed Components
  16. Zhi Yefan, Chai Hua, Teng Teng, Akbarzadeh Masoud (2025-02)
    Automated Toolpath Design of 3D Concrete Printing Structural Components
  17. Posani Magda, Voney Vera, Odaglia Pietro, Du Yi et al. (2025-01)
    Low-Carbon Indoor Humidity Regulation via 3D Printed Superhygroscopic Building Components
  18. Pfleger Marc-Patrick, Sam Nina, Radl Elisabeth, Vill Markus (2025-01)
    Assessment of the Suitability of Carbon Long Fibers as Reinforcement for Additively Manufactured Components
  19. Teng Teng, Zhi Yefan, Akbarzadeh Masoud (2024-11)
    Gradient Multimaterial Printing:
    Integrated and Tailored Thermal Insulation Through Gradient Multimaterial Additive Manufacturing for Masonry Architectural Components
  20. Wang Bolin, Yang Min, Liu Shilong, Liu Xianda et al. (2024-10)
    Research on Mechanical Properties of a 3D Concrete Printing Component-Optimized Path by Multi-Modal Analysis
  21. Wagner Juliana, Silveira Marcos, Vanderlei Romel, Das Sreekanta (2024-10)
    Comparative Analysis of Mold-Cast and 3D Printed Cement-Based Components:
    Implications for Standardization in Additive Construction
  22. Rudolph Enrico, Schönfelder Daniel, Funke Henrik, Gelbrich Sandra (2024-10)
    Efficient Production of Pre-Cast Concrete Staircases Using Additive-Manufactured, Component-Integrated Formworks Systems
  23. Maury-Ramírez Aníbal, Rinke Mario, Blom Johan (2024-09)
    Low-Carbon Embodied, Self-Cleaning, and Air-Purifying Building Envelope Components Using TiO2 Photocatalysis, 3D Printing, and Recycling
  24. Asaf Ofer, Bentur Arnon, Amir Oded, Larianovsky Pavel et al. (2024-09)
    A 3D Printing Platform for Design and Manufacturing of Multi-Functional Cementitious Construction Components and Its Validation for a Post-Tensioned Beam
  25. Kamhawi Abdallah, Meibodi Mania (2024-09)
    Techniques and Strategies in Extrusion-Based 3D Concrete Printing of Complex Components to Prevent Premature Failure
  26. Krakovská Ema, Briels David, Straßer Alexander, Kränkel Thomas et al. (2024-09)
    Functionally Hybridised Lightweight Concrete Components:
    Monolithic Building Construction Using Selective Paste-Intrusion
  27. Lima Lucas, Wangler Timothy, Sanchez Asel, Anton Ana-Maria et al. (2024-09)
    Durability of 3D Printed Concrete:
    Performance-Assessment of a Two-Component System Against Water Absorption, Carbonation, and Chloride-Ingress
  28. Daneshvar Dana, Rabiei Mahsa, Gupta Shashank, Najmeddine Aimane et al. (2024-09)
    Geometric Fidelity of Interlocking Bodies in Two-Component Robotic Additive Manufacturing
  29. Mohan Manu, Tao Yaxin, Schutter Geert, Tittelboom Kim (2024-09)
    Influence of Temperature Variations on the Performance of Two-Component 3D Printable Mixtures
  30. Kreiger Eric, Kreiger Megan, MacAllister Bruce, Wood Tanner et al. (2024-09)
    The Use of Additive Construction in All Structural Components of a Building
  31. Rudolph Jennifer, Lowke Dirk (2024-09)
    Design and Characterisation of a Two-Component Mortar-System for Shotcrete 3D Printing:
    An Approach to the Targeted Control of Material-Properties
  32. Unglaub Julian, Müggenburg Marc, Jahns Hendrik, Kloft Harald et al. (2024-09)
    Towards a Digital Twin to Enable First Time Right DED-Arc Components
  33. Parmigiani Silvia, Falliano Devid, Moro Sandro, Ferro Giuseppe et al. (2024-09)
    Preliminary Study on Multi-Functional Building Components Utilizing Variable Density Foamed Concrete via 3D Printing
  34. Amiri Fatemeh, Baghdadi Abtin, Kwon Hyunchul (2024-08)
    New Reinforcement Approach for Freeform Concrete Components Through Carbon Fiber 3D Printing
  35. Aabbas Mohamed, Mahdaoui Mustapha, Ahachad Mohammed, Mazian Brahim et al. (2024-07)
    Advancing Sustainable Construction:
    Terracotta Component Development Through Extrusion-Based 3D Printing with Local Clay
  36. Liu Nana, Gan Qili, Tao Qin, Wang Jie (2024-07)
    Research on Materials for Concrete (Mortar) 3D Printing Fabricated Components
  37. Asaf Ofer, Bentur Arnon, Larianovsky Pavel, Sprecher Aaron (2024-07)
    Granular Materials for 3D Printing of Construction Components and Structures
  38. Dielemans Gido, Lachmayer Lukas, Khader Noor, Hack Norman et al. (2024-07)
    Robotic Repair:
    In-Place 3D Printing for Repair of Building Components Using a Mobile Robot
  39. Parmigiani Silvia, Falliano Devid, Moro Sandro, Ferro Giuseppe et al. (2024-06)
    3D Printed Multi-Functional Foamed Concrete Building Components:
    Material-Properties, Component Design, and 3D Printing Application
  40. Jakob Cordula, Rudolph Jennifer, Wolf Julian, Neubauer Jürgen (2024-06)
    Hydration of a Two-Component CSA-OPC-Mix-Timing of Component Blending & Setting-on-Demand
  41. Konoplianyk Alexander, Sopilnyak Artem, Sirenok Kyrylo, Sereda Svitlana et al. (2024-06)
    Constituent Components of 3D Printing in Construction:
    Mixture, Reinforcement and Their Main Characteristics
  42. Romario Yulius, Bhat Chinmai, Ramezani Maziar, Jiang Cho-Pei (2024-06)
    Marine-Waste-Management of Oyster-Shell-Waste as Reinforcement for Clay Additive Manufacturing Components
  43. Birru Bizu, Rehman Atta, Kim Jung-Hoon (2024-06)
    Comparative Analysis of Structural Build-Up in One-Component Stiff and Two-Component Shotcrete-Accelerated Set-on-Demand Mixtures for 3D Concrete Printing
  44. Wangler Timothy, Vangen Kathrina, Burger Joris, Flatt Robert (2024-05)
    Digital Fabrication Material-Processing-Strategy for Bespoke Low-Clinker Mass-Concrete Components
  45. Susmel Luca (2024-02)
    Theory of Critical Distances and Notched Filament-Based 3D Printed Components:
    Lessons Learned from Polymers and Concrete
  46. Liu Ke, Takasu Koji, Jiang Jinming, Zu Kun et al. (2023-12)
    Mechanical Properties of 3D Printed Concrete Components:
    A Review
  47. Qamar Mu'ath, Yaghmour Emad, Wang Xingjian, Naito Clay et al. (2023-12)
    Use of 3D Printed Concrete Components for Thermal Energy Storage
  48. Sangiorgio Valentino, Parisi Fabio, Graziano Angelo, Tina Giosmary et al. (2023-11)
    3D Printing of Viscous Materials in Construction:
    New Design Paradigm, from Small Components to Entire Structures
  49. Taher Ammar, Aşut Serdar, Spoel Willem (2023-10)
    An Integrated Workflow for Designing and Fabricating Multi-Functional Building Components Through Additive Manufacturing with Clay
  50. Wolf Alexander, Carvalho João, Figueiredo Bruno, Cruz Paulo et al. (2023-09)
    Support-Strategies for Robocasting Ceramic Building Components
  51. Kogai A., Puzatova (nee Sharanova) Anastasiia, Dmitrieva Maria (2023-09)
    Modification of Fine Multicomponent Concrete with Activated Component-Based Additive
  52. Rehman Atta, Perrot Arnaud, Birru Bizu, Kim Jung-Hoon (2023-09)
    Recommendations for Quality-Control in Industrial 3D Concrete Printing Construction with Mono-Component Concrete:
    A Critical Evaluation of Ten Test-Methods and the Introduction of the Performance-Index
  53. Yemesegen Eden, Memari Ali (2023-07)
    A Review of Experimental Studies on Cob, Hempcrete, and Bamboo Components and the Call for Transition Towards Sustainable Home Building with 3D Printing
  54. Placzek Gerrit, Schwerdtner Patrick (2023-07)
    Concrete Additive Manufacturing in Construction:
    Integration Based on Component-Related Fabrication-Strategies
  55. Kalthoff Matthias, Bosbach Sven, Backes Jana, Cruz Cynthia et al. (2023-06)
    Fabrication of Lightweight, Carbon Textile Reinforced Concrete Components with Internally Nested Lattice Structure Using 2-Layer Extrusion by LabMorTex
  56. Zohrabyan Vahan, Zöller Raphael, Gradic Simon, Braml Thomas (2023-06)
    Potential of 3D Printed Steel Fiber Reinforced Concrete Components for the Protection of Critical Infrastructure:
    Impact and Free-Fall Tests
  57. Alabbasi Mohammad, Agkathidis Asterios, Chen Hanmei (2023-01)
    Robotic 3D Printing of Concrete Building Components for Residential Buildings in Saudi Arabia
  58. Poudelet Louison, Molina Miguel, Calvo Laura, Cardona Roger et al. (2023-01)
    Comparison Between Mono- and Bi-Component Extruders in Concrete Additive Manufacturing
  59. Lachmayer Lukas, Dörrie Robin, Kloft Harald, Raatz Annika (2022-06)
    Process-Control for Additive Manufacturing of Concrete Components
  60. Lachmayer Lukas, Dörrie Robin, Kloft Harald, Raatz Annika (2021-11)
    Automated Shotcrete 3D Printing:
    Printing Interruption for Extended Component Complexity
  61. Placzek Gerrit, Brohmann Leon, Mawas Karam, Schwerdtner Patrick et al. (2021-11)
    A Lean-Based Production Approach for Shotcrete 3D Printed Concrete Components
  62. Wolf Alexander, Rosendahl Philipp, Knaack Ulrich (2021-10)
    Additive Manufacturing of Clay and Ceramic Building Components
  63. Xu Weiguo, Gao Yuan, Sun Chenwei, Wang Zhi (2020-09)
    Fabrication and Application of 3D Printed Concrete Structural Components in the Boshan Pedestrian Bridge Project
  64. Kontovourkis Odysseas, Tryfonos George (2019-11)
    Robotic 3D Clay Printing of Prefabricated Non-Conventional Wall Components Based on a Parametric-Integrated Design
  65. Kloft Harald, Hack Norman, Mainka Jeldrik, Brohmann Leon et al. (2019-11)
    Additive Manufacturing in Construction:
    First 3D-Printed Reinforced Concrete Components Using Shotcrete 3D Printing (SC3DP) Technology
  66. Bard Joshua, Cupkova Dana, Washburn Newell, Zeglin Garth (2018-12)
    Robotic Concrete Surface Finishing:
    A Moldless Approach to Creating Thermally Tuned Surface Geometry for Architectural Building Components Using Profile 3D Printing
  67. Ledderose Lukas, Lehmberg Sven, Budelmann Harald, Kloft Harald (2018-12)
    Robot-Assisted, Magnetic Alignment of Microsteel Fibers in Thin-Walled UHPFRC Components
  68. Ketel Sabrina, Falzone Gabriel, Wang Bu, Washburn Newell et al. (2018-04)
    A Printability Index for Linking Slurry Rheology to the Geometrical Attributes of 3D Printed Components
  69. Craveiro Flávio, Bártolo Helena, Gale Andrew, Duarte José et al. (2017-07)
    A Design Tool for Resource-Efficient Fabrication of 3D Graded Structural Building Components Using Additive Manufacturing
  70. Xu Jie, Ding Lieyun, Love Peter (2017-01)
    Digital Reproduction of Historical Building Ornamental Components:
    From 3D Scanning to 3D Printing
  71. Hager Izabela, Golonka Anna, Putanowicz Roman (2016-08)
    3D Printing of Buildings and Building Components as the Future of Sustainable Construction?
  72. Lim Sungwoo, Buswell Richard, Valentine Philip, Piker Daniel et al. (2016-06)
    Modelling Curved-Layered Printing Paths for Fabricating Large-Scale Construction Components
  73. Herrmann Michael, Sobek Werner (2015-10)
    Functionally Graded Concrete:
    Numerical Design Methods and Experimental Studies on Mass Minimized Components
  74. Cesaretti Giovanni, Dini Enrico, Kestelier Xavier, Colla Valentina et al. (2013-08)
    Building Components for an Outpost on the Lunar Soil by Means of a Novel 3D Printing Technology
  75. Rael Ronald, Fratello Virginia (2011-10)
    Developing Concrete Polymer Building Components for 3D Printing