Skip to content

#comparision

Keywords by Co - Occurrence

  1. Kiyani Muhammad, Kamal Muhammad, Hussain Syed, Emaan Rajja et al. (2026-01)
    A Novel Arch Infill for 3D Concrete Printed Beams:
    A Comparative Study of Flexural Performance Against Truss and Solid Designs
  2. Gil-Lopez Tomas, Amirfiroozkoohi Alireza, Valiente López María, Verdu-Vazquez Maria (2026-01)
    The Impact of 3D Printing on Mortar Strength and Flexibility:
    A Comparative Analysis of Conventional and Additive Manufacturing Techniques
  3. Gnanaraj Anies, Moreno Leyla, Thabet Reham, Rangel Bárbara et al. (2026-01)
    Comparative Analysis of Onsite Versus Offsite 3D Printing in Construction:
    Benefits, Challenges, and Case Studies
  4. Mohammed Salhah, Aljewifi Hana, Jldain Hafeth (2025-12)
    Evaluating Compressive Strength in 3D-Printed Concrete Structures:
    A Comparative Study of ANSYS Simulations and Experimental Data
  5. Feliciano Renzo, Barrera Natalia, Lukyanenko Artyom, Rangel Bárbara et al. (2025-12)
    Sustainable Geometries:
    A Comparative Analysis of Thermal Performance in Uninsulated 3D Printed Concrete Wall Topologies
  6. Ataei Sarah, Jafari Amirhosein (2025-10)
    Comparative Environmental Impact Assessment of 3D Concrete Printing and Precast Techniques in Bridge Construction:
    A Case Study Analysis
  7. Liu Ruiqing, Du Hongjian (2025-09)
    Optimizing Thermal Insulation Through Geometric Design:
    Comparative Analysis of Normal and Lightweight 3D Printed Concrete Wall Patterns
  8. Liu Shijie, Liu Tong, Alqurashi Muwaffaq, Abdou Elabbasy Ahmed et al. (2025-09)
    Advancing 3D-Printed Fiber-Reinforced Concrete for Sustainable Construction:
    A Comparative Optimization Based Study of Hybrid Machine Intelligence Models for Predicting Mechanical Strength and CO₂ Emissions
  9. Raza Muhammad, Besklubova Svetlana, Kravchenko Ekaterina, Zhong Ray (2025-07)
    Economic Viability of 3D Concrete Printing:
    A Comparative Study with Traditional Construction Method
  10. Liu Qiang, Zhang Xinwei, Jiang Quan, Xia Yong et al. (2025-07)
    Effects of Nano-Al2O3, Nano-MgO and Nano-Fe2O3 on the Properties of Cement-Based 3D Printing:
    A Comparative Study
  11. Karamara Merve, Bogdanski Moritz-Ole, Zöller Raphael, Albrecht Sophie et al. (2025-06)
    Increasing Efficiency and Sustainability:
    A Comparative Analysis of Concrete 3D Printing and Traditional Methods Based on Case Studies
  12. Lin Xing-Tao, Xu Shuhao, Chen Xiangsheng, Huang Zhongkai (2025-06)
    3D Printed Concrete Tunnel Lining:
    Comparative Study on Mechanical Properties of Curved and Straight Printed Specimens
  13. Rosa Marco, Brito Diogo, Vilas-Boas Rodrigo, Sousa José (2025-06)
    3DCP vs Conventional Construction:
    Comparative Analysis of Energy Performance and Embodied Carbon
  14. Asif Usama (2025-05)
    Comparative Analysis of Evolutionary Computational Methods for Predicting Mechanical Properties of Fiber-Reinforced 3D Printed Concrete
  15. Kaya Ebru, Ciza Baraka, Yalçınkaya Çağlar, Felekoğlu Burak et al. (2025-05)
    A Comparative Study on the Effectiveness of Fly Ash and Blast Furnace Slag as Partial Cement Substitution in 3D Printable Concrete
  16. Tarek Shaimaa, Mansour Yasser, Abdelmohsen Sherif, Kohail Mohamed et al. (2025-02)
    Evaluating the Role of Additive Manufacturing in Adobe Brick Enhancement:
    A Comparative Study
  17. Xia Zhenjiang, Geng Jian, Zhou Zhijie, Liu Genjin (2025-01)
    Comparative Analysis of Polypropylene, Basalt, and Steel Fibers in 3D Printed Concrete:
    Effects on Flowability, Printabiliy, Rheology, and Mechanical Performance
  18. Lolli Francesca, Mehlomakulu Bungane, Monkman Sean (2025-01)
    Case Study of 3D Printed Concrete as Compared to Conventional Construction:
    Structural Comparison and Life Cycle Carbon Assessment
  19. Latha P., Shanmugavelu V., Tamilmani A., Thayalnayaki D. et al. (2024-12)
    Evaluating 3D Concrete Printing Effectiveness Through a Comparative Study Using SVM, Decision Trees, and Random Forest Techniques
  20. Forcael Eric, Alucema Contreras Elena, Burkart Medina Adolfo, García-Alvarado Rodrigo et al. (2024-12)
    Comparative Study of Visual Programming Procedures for 3D Concrete Printing of Different Geometric Shapes
  21. Nunes Lavynia, Miranda Freitas Juan Oliveira, Abud Vilanova João, Rubin Ariane (2024-12)
    Comparative Analysis of the Construction Feasibility of Special Works of Art Using 3D Concrete Printing, Prefabricated Concrete, and Cast In-Situ
  22. Raza Muhammad, Besklubova Svetlana, Zhong Ray (2024-11)
    Comparative Environmental Value-Stream-Assessment of Off-Site and On-Site 3D Construction Printing Processes
  23. Wagner Juliana, Silveira Marcos, Vanderlei Romel, Das Sreekanta (2024-10)
    Comparative Analysis of Mold-Cast and 3D Printed Cement-Based Components:
    Implications for Standardization in Additive Construction
  24. Josa Irene, Fuente Albert (2024-10)
    Traditional and Modern Methods of Construction:
    Comparative Study of the Sustainability of Single‐Family Homes
  25. Tang Hong, Xiong Shiqi (2024-09)
    Comparative Analysis of Carbon-Emission Accounting and Carbon-Reduction-Effect of 3D Printed Concrete Structures at the Stage of Architecturalization
  26. Chougan Mehdi, Skibicki Szymon, Noaimat Yazeed, Federowicz Karol et al. (2024-09)
    Comparative Analysis of Ternary Blended Cement with Clay and Engineering-Brick-Aggregate for High-Performance 3D Printing
  27. Srinivas Dodda, Panda Biranchi, Sitharam Thallak (2024-09)
    Comparative Study into the Inter-Layer Bond Strength of 3D Printed Mortar:
    Underwater vs. Air Environments
  28. Yan Ruizhen, Meng Fangqi, Ke Guoju, Jia Kerui (2024-08)
    Comparative Evaluation of the Applicability of 3D Printing Mortar with Different Waste-Powders
  29. Raza Muhammad, Besklubova Svetlana, Zhong Ray (2024-07)
    Economic Analysis of Offsite and Onsite 3D Construction Printing Techniques for Low-Story Buildings:
    A Comparative Value-Stream-Assessment
  30. Sariyev Bakytzhan, Konysbekov Alisher, Jexembayeva Assel, Konkanov Marat (2024-07)
    A Comparative Study of the Rheological Properties of a Fly-Ash-Based Geopolymer Reinforced with PP-Fiber for 3D Printing:
    An Experimental and Numerical Approach
  31. Ye Junhong, Zhuang Zicheng, Teng Fei, Yu Jie et al. (2024-07)
    Comparative Environmental-Assessment of 3D Concrete Printing with Engineered Cementitious Composites
  32. Shoaei Parham, Gallantree-Smith Harrison, Martínez Pacheco Victor, Pamies Ramón et al. (2024-06)
    Comparative Analysis of 3D Printing of Portland Cement Mortars with Hydroxypropyl-Methylcellulose and Micro-Fibrillated Cellulose as Viscosity-Modifying-Agents
  33. Besklubova Svetlana, Raza Muhammad, Zhong Ray, Skibniewski Mirosław (2024-06)
    3D Printing vs. Traditional Construction:
    Cost Comparisons from Design to Waste Disposal Stages
  34. Birru Bizu, Rehman Atta, Kim Jung-Hoon (2024-06)
    Comparative Analysis of Structural Build-Up in One-Component Stiff and Two-Component Shotcrete-Accelerated Set-on-Demand Mixtures for 3D Concrete Printing
  35. Liu Qiang, Jiang Quan, Yu Rang, Rong Yao et al. (2023-12)
    Extrusion 3D Printing Circular and Horseshoe Tunnel Physical Models:
    A Comparative Study of Deformation and Brittle Failure
  36. Wang Yang, Qiu Liu-Chao, Chen Song-Gui, Liu Yi (2023-12)
    3D Concrete Printing in Air and Under Water:
    A Comparative Study on the Buildability and Inter-Layer Adhesion
  37. Ibrahim Kamoru, Zijl Gideon, Babafemi Adewumi (2023-10)
    Comparative Studies of LC³- and Fly-Ash-Based Blended Binders in Fiber-Reinforced Printed Concrete:
    Rheological and Quasi-Static Mechanical Characteristics
  38. Bello Nicholas, Memari Ali (2023-06)
    A Structural and Thermal Comparative Review of 3D Printed Wall Shapes
  39. Jones Kathryn, Li Mo (2023-06)
    Life Cycle Assessment of Ultra-Tall Wind Turbine Towers Comparing Concrete Additive Manufacturing to Conventional Manufacturing
  40. Khan Shoukat, Jassim Muhammad, İlcan Hüseyin, Şahin Oğuzhan et al. (2023-04)
    3D Printing of Circular Materials:
    Comparative Environmental Analysis of Materials and Construction Techniques
  41. Vijayalaxmi Jeyasingh, Singh Parth (2023-01)
    Comparative Analysis of Concrete 3D Printing and Conventional Construction Technique for Housing
  42. Bello Nicholas, Memari Ali (2022-12)
    Comparative Review of the Technology and Case Studies of 3D Concrete Printing of Buildings by Several Companies
  43. Srinivas Dodda, Dey Dhrutiman, Panda Biranchi, Sitharam Thallak (2022-12)
    Printability, Thermal and Compressive Strength Properties of Cementitious Materials:
    A Comparative Study with Silica-Fume and Limestone
  44. Kompella Sriram, Monte Francesco, Bassani Andrea, Guanziroli Stefano et al. (2022-09)
    A Comparative Study of Hardened-State Mechanical Properties of 3D Printed and Conventionally Cast Fiber-Reinforced Concrete
  45. Aydin Eylül, Kara Burhan, Bundur Zeynep, Özyurt Nilüfer et al. (2022-08)
    A Comparative Evaluation of Sepiolite and Nano-Montmorillonite on the Rheology of Cementitious Materials for 3D Printing
  46. Gislason Styrmir, Bruhn Simon, Breseghello Luca, Sen Burak et al. (2022-06)
    Porous 3D Printed Concrete Beams Show an Environmental Promise:
    A Cradle-to-Grave Comparative Life Cycle Assessment
  47. Prem Prabhat, Ravichandran Darssni, Kaliyavaradhan Senthil, Ambily Parukutty (2022-04)
    Comparative Evaluation of Rheological Models for 3D Printable Concrete
  48. Ennab Lena, Dixit Manish, Birgisson Bjorn, Kumar Pranav (2022-04)
    Comparative Life Cycle Assessment of Large-Scale 3D Printing Utilizing Kaolinite-Based Calcium-Sulfoaluminate-Cement Concrete and Conventional Construction
  49. Liu Siyu, Lu Bing, Li Hongliang, Pan Zehua et al. (2022-03)
    A Comparative Study on Environmental Performance of 3D Printing and Conventional Casting of Concrete Products with Industrial Wastes
  50. Batikha Mustafa, Jotangia Rahul, Baaj Mohamad, Mousleh Ibrahim (2021-12)
    3D Concrete Printing for Sustainable and Economical Construction:
    A Comparative Study
  51. Khajavi Siavash, Tetik Müge, Mohite Ashish, Peltokorpi Antti et al. (2021-04)
    Additive Manufacturing in the Construction Industry:
    The Comparative Competitiveness of 3D Concrete Printing
  52. Salman Nazar, Ma Guowei, Ijaz Nauman, Wang Li (2021-01)
    Weak Inter-Layer Bonding in Extrusion 3D Concrete Printing:
    A Comparative Analysis of Mitigation Techniques
  53. Mohammad Malek, Masad Eyad, Ghamdi Sami (2020-12)
    3D Concrete Printing Sustainability:
    A Comparative Life Cycle Assessment of Four Construction Method Scenarios
  54. Alhumayani Hashem, Gomaa Mohamed, Soebarto Veronica, Jabi Wassim (2020-06)
    Environmental Assessment of Large-Scale 3D Printing in Construction:
    A Comparative Study between Cob and Concrete
  55. Weng Yiwei, Li Mingyang, Ruan Shaoqin, Wong Teck et al. (2020-03)
    Comparative Economic, Environmental and Productivity-Assessment of a Concrete Bathroom Unit Fabricated Through 3D Printing and a Pre-Cast Approach
  56. Korniejenko Kinga, Łach Michał, Chou S., Lin Wei-Ting et al. (2019-11)
    A Comparative Study of Mechanical Properties of Fly-Ash-Based Geopolymer Made by Casted and 3D Printing Methods