Skip to content

#self

Keywords by Co - Occurrence

  1. Taj Khalilullah, Reid Laraimie, Su Yen-Fang (2026-04)
    Environmental Influence on the Smart Self-Sensing 3D-Printed Concrete Column
  2. Wang Xianfeng, Zheng Junhao, Zhang Xuanzhe, Zhu Guang et al. (2026-04)
    Pickering Emulsion-Based 3D Printing for Efficient Vascular Self-Healing in Cementitious Materials.
  3. Rojas Omar, Nakamatsu Javier, Aguilar Rafael, Ñañez Robert et al. (2026-03)
    Improved Resistance to Water Erosion and Self-Healing Capacity of Earthen-Based 3D Printed Elements Using Enzyme-Induced Carbonate Precipitation (EICP)
  4. Huang Kaisheng, Elchalakani Mohamed, Ran Hongyu, Ayough Pouria et al. (2026-03)
    Improvement of the Self-Sensing Properties of the 3D Printing UHPC Incorporating Conductive Rubber
  5. Hassan Amer, Sabri Sabri, Alomayri Thamer, Sun Li et al. (2026-03)
    Critical Review of Self-Healing Mechanisms in 3D-Printed Concrete:
    Feasibility, Challenges, and Pathways Toward Durable Automated Construction
  6. Hu Zhiheng, Elchalakani Mohamed, Ran Hongyu, Yang Bo (2026-01)
    Multifunctional 3D-Printed Ultra-Lightweight Engineered Cementitious Composites:
    Mechanical Properties and Self-Sensing Function
  7. Jesus Manuel, Lopes Joana, Teixeira João, Guimarães Ana et al. (2026-01)
    Application of Self-Cleaning Products on 3D-Printed Building Elements:
    An Experimental Study
  8. Fatima Warsi, Syed Bustan, Panda Biranchi, Biswas Pankaj (2025-12)
    Numerical Evaluation of the Seismic Performance of Self-Centering 3D Printed Concrete Wall
  9. Manickavasakam Karnan, Huri Mohammed, Kharma Khaled, Hosan Anwar et al. (2025-11)
    Smart 3D-Printed Concrete:
    Recent Advances in Self-Sensing Mix Design and Functional Reinforcements
  10. Lim Sean, Lee Junghyun, Bawarith Nuran, Paul Suvash et al. (2025-11)
    The Efficacy of Self-Curing Agents on Enhanced Internal Curing and Accelerated Carbonation with CO2-Steam Integrated 3D Concrete Printing
  11. Ali Muhammad, Qian Hui, Umar Muhammad, Fenglin Liu et al. (2025-10)
    Rheological, Mechanical, and Self-Recovery Performance of 3D-Printed ECC Reinforced with Shape Memory Alloy Fibers
  12. Liu Han, Sousa Israel, Laflamme Simon, Doyle Shelby et al. (2025-09)
    Embedment of 3D Printed Self-Sensing Composites for Smart Cementitious Components
  13. Abedi Mohammadmadhi, Waris Muhammad, Alawi Mubarak, Jabri Khalifa (2025-08)
    Transformative Low-Carbon 3D-Printed Infrastructure:
    Machine Learning-Driven Self-Sensing and Self-Heating Limestone Calcined Clay Cement (LC3) Composites
  14. Nandurkar Bhupesh, Raut Jayant, Hinge Pawan, Bahoria Boskey et al. (2025-06)
    Multi-Scale Deep Learning Framework for Three Dimensional Printed Self-Sensing Cementitious Composites with Hybrid Nano-Carbon Fillers
  15. Mahdy Deena, Dara Seni, Abdelrahim Marwa (2025-06)
    Evaluating Structure Stability of Self-Supporting 3D Printed Earth-Based Cantilevers Using Robotic ARM
  16. Zhang Ruo-Chen, Li Jiaxing, Liu Yiran, Huang Yimiao et al. (2025-06)
    Self-Healing Approach for Micro-Defects in 3D Printed Concrete:
    Microbial Community
  17. Sun Junbo, Aslani Farhad, Mann Dhruv, Huang Bo et al. (2025-05)
    Mechanical and Piezoresistive Behaviour of 3D Printed Self-Sensing One-Way Concrete Slab
  18. Zahabizadeh Behzad, Pereira João, Pereira Eduardo, Cunha Vítor (2025-05)
    Self-Healing Assessment of Fiber Reinforced Cementitious Mortars Developed for 3D Concrete Printing:
    Recovery of Mechanical Performance and Self-Sealing Capability
  19. He Shan, Luković Mladena, Schlangen Erik (2025-04)
    Self-Healing Strain-Hardening Concrete Cover
  20. An Xuehui, Liang Qimin, Li Pengfei, You Wei et al. (2025-02)
    Experimental Assessment on Printing Performance and Mechanical Properties of Underwater Self-Protecting 3D Printing Concrete
  21. Liu Han, Laflamme Simon, Cai Bin, Lyu Ping et al. (2024-11)
    Investigation of 3D Printed Self-Sensing UHPC Composites Using Graphite and Hybrid Carbon Microfibers
  22. Sousa Israel, Alessandro Antonella, Mesquita Esequiel, Laflamme Simon et al. (2024-11)
    Comprehensive Review of 3D Printed Cementitious Composites with Carbon Inclusions:
    Current Status and Perspective for Self-Sensing Capabilities
  23. Li Shuai, Lan Tian, Nguyen Hung-Xuan, Tran Jonathan (2024-10)
    Frontiers in Construction 3D Printing:
    Self-Monitoring, Multi-Robot, Drone-Assisted Processes
  24. Maury-Ramírez Aníbal, Rinke Mario, Blom Johan (2024-09)
    Low-Carbon Embodied, Self-Cleaning, and Air-Purifying Building Envelope Components Using TiO2 Photocatalysis, 3D Printing, and Recycling
  25. Wan Zhi, Xu Yading, Šavija Branko (2024-09)
    Creating Vascular Self-Healing Concrete Using Direct Ink Writing
  26. Jacquet Yohan, Spangenberg Jon, Perrot Arnaud (2024-09)
    Exploring Viscosity and Friction Through Temperature:
    Understanding Self-Heating Dynamics of Non-Newtonian 3D Printable Construction Materials via CFD Modeling
  27. Silfwerbrand Johan (2024-09)
    Composite Concrete Columns of 3DP Concrete and Self-Compacting Concrete Subjected to Normal Force
  28. Hanifa Mohamad, Figueiredo Bruno, Mahdy Deena, Mendonça Paulo et al. (2024-08)
    Continuum Optimization of 3D Printed Self-Supported Shell:
    Hybrid Strategy for Crafting Ribbed System
  29. Chovghi Frederic, Richter David, Dörfler Kathrin, D'Acunto Pierluigi (2024-08)
    Reconsidering the Historical Cap Ceiling:
    Layerwise Form-Finding of Self-Supporting Vaulted Structures for In-Situ 3D Printing
  30. Huang Shuyi, Xu Weiguo, Anton Ana-Maria, Dillenburger Benjamin (2024-08)
    Self-Supporting Lamellae:
    Shape Variation Methods for the 3D Concrete Printing of Large Overhang Structures
  31. Baghi Ali, Aminpour Nima, Memari Ali, Bilén Sven et al. (2024-07)
    3D Concrete Printing of Self-Supported Filaments via Entrained Cables:
    Constructing Formwork-Free Spanning Structures
  32. Liu Han, Laflamme Simon, Alessandro Antonella, Ubertini Filippo (2024-05)
    3D Printed Self-Sensing Cementitious Composites Using Graphite and Carbon-Micro-Fibers
  33. Lu Bing, Wang Lining, Wang Xiangyu, Tan Ming et al. (2024-04)
    Development of Robotic Sprayable Self-Sensing Cementitious Material for Smart Structural Health Monitoring
  34. Wan Zhi, Xu Yading, He Shan, Schlangen Erik et al. (2024-01)
    The Use of Additive Manufacturing in Self-Healing Cementitious Materials:
    A State of the Art Review
  35. Li Zhuming, Aslani Farhad (2023-10)
    Performance of 3D Printed Beams and Slabs Using Self-Sensing Cementitious Composites and DIC Method
  36. Zafar Muhammad, Bakhshi Amir, Hojati Maryam (2023-10)
    Printability and Shape Fidelity Evaluation of Self-Reinforced Engineered Cementitious Composites
  37. Fernández Fernando, Jarabo Rocío, Asensio Eloy, Guerrero Ana (2023-09)
    Non-Destructive Tests to Evaluate the Self-Healing Capacity for a 3D Printing ECC Material
  38. Ahmadi Khatereh, Mousavi Seyed, Dehestani Mehdi (2023-09)
    Influence of Nano-Coated Micro-Steel-Fibers on Mechanical and Self-Healing Properties of 3D Printable Concrete Using Graphene-Oxide and Polyvinyl-Alcohol
  39. Varela Hugo, Barluenga Gonzalo, Perrot Arnaud (2023-08)
    Nano-Modified Materials for New Construction Technologies:
    Self-Compacting and 3D Printing
  40. Han Xiaoyu, Yan Jiachuan, Chen Tiefeng, Tang Boyang et al. (2023-07)
    Plastic Shrinkage of 3D Printed Concrete Under Different Self-Weight of Upper Layers
  41. Atkinson Cynthia, Aslani Farhad (2023-03)
    Performance of 3D Printed Columns Using Self-Sensing Cementitious Composites
  42. Wang Lining, Aslani Farhad (2022-11)
    Structural Performance of Reinforced Concrete Beams with 3D Printed Cement-Based Sensor Embedded and Self-Sensing Cementitious Composites
  43. Liu Qiang, Jiang Quan, Huang Mojia, Xin Jie et al. (2022-10)
    The Fresh and Hardened Properties of 3D Printing Cement-Base Materials with Self-Cleaning Nano-TiO2:
    An Exploratory Study
  44. Dulaj Albanela, Salet Theo, Lucas Sandra (2022-09)
    Mechanical Properties and Self-Sensing Ability of Graphene-Mortar Compositions with Different Water-Content for 3D Printing Applications
  45. Ye Junhong, Weng Yiwei, Du Hongjian, Li Mingyang et al. (2022-06)
    Feasibility of Using Ultra-High-Ductile Concrete to Print Self-Reinforced Hollow Structures
  46. Bekaert Michiel, Tittelboom Kim, Schutter Geert (2022-06)
    Evaluation of the Bond Strength Between 3D Printed and Self-Compacting Concrete
  47. Biricik Öznur, Mardani Ali (2022-05)
    Parameters Affecting Thixotropic Behavior of Self-Compacting Concrete and 3D Printable Concrete:
    A State of the Art Review
  48. Wang Lining, Aslani Farhad, Mukherjee Abhijit (2022-04)
    Development of 3D Printable Self-Sensing Cementitious Composites
  49. Ramyar Elham, Cusatis Gianluca (2021-11)
    Discrete Fresh Concrete-Model for Simulation of Ordinary, Self-Consolidating, and Printable Concrete-Flow
  50. Choi Se-Jin, Kim Ji-Hwan, Jeong Hyojin, Lee Ja-Sung et al. (2021-08)
    Simulated and Experimental Investigation of the Mechanical Properties and Solubility of 3D Printed Capsules for Self-Healing Cement Composites
  51. Prasittisopin Lapyote, Sakdanaraseth Thanut, Horayangkura Vimolsiddhi (2021-06)
    Design and Construction Method of a 3D Concrete Printing Self-Supporting Curvi-Linear Pavilion
  52. Wang Li, Liu Yi, Yang Yu, Li Yanfeng et al. (2021-04)
    Bonding Performance of 3D Printing Concrete with Self-Locking Interfaces Exposed to Compression-Shear and Compression-Splitting Stresses
  53. Soltan Daniel, Li Victor (2018-03)
    A Self-Reinforced Cementitious Composite for Building-Scale 3D Printing
  54. Keating Steven, Leland Julian, Cai Levi, Oxman Neri (2017-04)
    Toward Site-Specific and Self-Sufficient Robotic Fabrication on Architectural-Scales