Skip to content

#interlayer

Keywords by Co - Occurrence

  1. Saravanan Pradeep, Ramaswamy Ananth (2026-04)
    A Continuum Damage–Cohesive Zone Modeling Framework for Filament and Interlayer Fracture in 3D-Printed Concrete
  2. Xu Wenbin, Xu Zihao, Liu Tao, Ouyang Jun et al. (2026-03)
    A Prediction Model of Interlayer Bond Strength for 3D-Printed Concrete Considering Printing Interval and Environmental Effects
  3. Wu Yiwen, Liu Chao, Liu Huawei, Pan Zhihong et al. (2026-03)
    Multiscale Mechanistic Insights into the Dual Effect of Interlayer Reinforcement on the Shear Behavior of 3D-Printed Concrete Composite Walls
  4. Jiang Youbau, Zhang Zupan, Wen Jun, Gao Pengxiang et al. (2026-03)
    Toothed Nozzle Optimization for Enhancement of Interlayer Tensile Strength of 3D-Printed Concrete with CTGAN and XGBoost Model
  5. Omarov Bekarys, Ali Md., Memon Shazim (2026-03)
    A Novel Method to Enhance Interlayer Bond in 3D-Printed Concrete Using Dry-Powder Application of Supplementary Cementitious Materials
  6. Žižková Nikol, Válek Josef, Vespalec Arnošt, Melichar Jindřich et al. (2026-03)
    Layer Bond Strength in 3D-Printed Concrete:
    The Role of Interlayer Surface Area and Printing Delay Time
  7. Alzoubi Y., Muciaccia Giovanni, Ferrara Liberato, Cibelli Antonio et al. (2026-03)
    Numerical Modelling of Interlayer Adhesion in 3D-Printed Concrete with LDPM
  8. Wang Longsheng, Huang Zili, Nguyen Giang, Karakus Murat (2026-02)
    Improving Interlayer Adhesion of 3D Printed Concrete by Filament Interlocking
  9. Versteege Jelle, Salet Theo, Wolfs Robert (2026-02)
    Sensory Data Mapping and Database Development for Interlayer Bond Strength:
    Towards Digital Shadows in 3D Concrete Printing
  10. Giulivo Gianluca, Menna Costantino (2026-02)
    The Role of Interlayer Interfaces in 3D-Printed Elements:
    A Nonlinear FEM-Based Study
  11. Yuan Yong, Zia Syed, Sheikh Taimur, Irfan ul Hassan Muhammad et al. (2026-02)
    Enhancing Interlayer Bond Strength of 3D-Printed Concrete Through Microstructural Densification by Means of Incorporating Sugarcane Bagasse Ash
  12. Dang Thi, Tran Mien, Nguyen Thi, Nguyen Hoang (2026-02)
    Large Scale 3D Printed Concrete Wall:
    Interlayer Bonding and Shrinkage
  13. Feng Lei, Chen Nuo, Wen Xiaodong (2026-01)
    Influence of Process Parameters on Interlayer Interface Mechanical Properties of 3D Printing Fiber Reinforced Concrete
  14. Bharti Mrityunjay, Menon Arun, Santhanam Manu (2026-01)
    Experimental Study of Hardened Properties of 3D-Printed Concrete Under Compression, Tension and Shear Considering Interlayer Influence
  15. Wang Xiangyu, Li Baidian, Wu Fei, Gu Kan et al. (2025-12)
    Enhancing Interlayer Properties and Sustainability of 3D-Printed UHPC with Antimony Tailings
  16. Liu Renlong, Cheng Zhangqi (2025-10)
    Interlayer Fracture Properties of 3D-Printed Cement-Based Structures:
    Influencing Factors and Mechanisms
  17. Simwanda Lenganji, David Abayomi, Gatheeshgar Perampalam, Olalusi Oladimeji et al. (2025-10)
    Optimisation of Interlayer Bond Strength in 3D-Printed Concrete Using Response Surface Methodology and Artificial Neural Networks
  18. Luo Rui, Sun Bin, Fei Xiangpeng, Du Hongjian (2025-10)
    Interlayer Strength Loss in 3D Printed Concrete Due to Time-Gap-Induced Macroporosity
  19. Sun Hou-Qi, Zeng Jun-Jie, Xie Shan-Shan, Xia Jun-Run et al. (2025-09)
    Mechanical and Microstructural Characterization of Interlayer Bonding in Multi-Material 3D-Printed Concrete
  20. Chan Li-Jing, Padil Khairul, Chin Chee-Long, Ibrahim Izni et al. (2025-09)
    Strategies to Enhance Interlayer Bonding in 3D Printed Concrete:
    A Review
  21. Abid Khasim, Syed Sajid, Khan Majid (2025-08)
    Explainable Machine Learning-Based Model for Predicting Interlayer Bond Strength in 3D Printed Concrete
  22. Kumar Rohan, Das Nabodyuti, Nanthagopalan Prakash (2025-08)
    Novel Interlocking Nozzle Geometry for Enhanced Interlayer Strengthening in 3D Concrete Printing
  23. Singh Amardeep, Anand Kamal, Liu Qiong, Tam Vivian et al. (2025-07)
    Enhancing Interlayer Bonding in 3D Printed Concrete Using Bacteria-Based Biomineralization
  24. Ishikawa Shinichi, Yamada Ryo, Tasaki Ryosuke (2025-07)
    High-Sensitivity Interlayer Force Measurement and Multi-Layer Smoothing Control for 3D Printing on Uneven Surfaces
  25. Cao Yifang, Shen Luming, Mukherjee Abhijit, Abbas Ali et al. (2025-07)
    Improvement of the Interlayer Bonding Strength in a 3D-Printed Mortar with Biocement Sprayed into Interlayer Surfaces
  26. Li Qiyan, Su Anshuang, Gao Xiaojian (2025-06)
    Improvement of Interlayer Performance of 3D Printable Magnesium Oxysulfate Cement-Based Materials by Carbonation Curing
  27. Pei Qiang, Zhong Yingzhu, Wang Shuai, Zhang Luxi et al. (2025-06)
    Interlayer Bonding Shear Performance and Constitutive Model of 3DPC with Different Fine Aggregate Gradations
  28. Zhu Xingyi, Anwar Muhammad, Deng Guomin, Wang Xiaoming et al. (2025-05)
    Effect of Microwave Heating Under Varying Exposure Conditions on Rheological Properties, Interlayer Bond and Buildability Performance of 3D-Printed Geopolymer
  29. Munemo Rue, Kruger Jacques, Zijl Gideon (2025-05)
    Surface Treatment of 3DPC Interlayers with Silicate-Based Solution for Enhanced Interfacial Bonding
  30. Lucen Hao, Hanxiong Lyu, Huanghua Zhang, Shipeng Zhang et al. (2025-05)
    Development of CO2-Activated Interface Enhancer to Improve the Interlayer Properties of 3D-Printed Concrete
  31. An Ning, Wang Huai, Wang Peijun, Xu Chuanhua et al. (2025-04)
    Tension-Compression Anisotropic Cohesion Model for the Interlayer Interface of 3D-Printed Concrete Compression Specimens
  32. Zhou Biao, Zhou Hongru, Yoshioka Hideki, Noguchi Takafumi et al. (2025-04)
    Mechanical and Microstructure Evolution of 3D Printed Concrete Interlayer at Elevated Temperatures
  33. Kompella Sriram, Levi Marinella, Ferrara Liberato (2025-04)
    Identifying Interlayer Fracture Properties in 3D Printed Concrete Specimens via Multidirectional Flexural Tests
  34. Teng Fei, Ye Junhong, Yu Jie, Weng Yiwei (2025-04)
    Multi-Material Printing to Simultaneously Enhance Interlayer and Flexural Performance in 3D Concrete Printing
  35. Wang Yang, Qiu Liu-Chao, Chen Song-Gui, Liu Yi (2025-04)
    Novel Strategy for Enhancing Rheological Properties and Interlayer Bonding in Underwater 3D Concrete Printing
  36. Liu Chuanbei, Zou Mengtong, Chen Xuemei, Deng Yongjun et al. (2025-04)
    Feasibility Study of 3D-Printed Rubberized Concrete as a Permanent Formwork:
    Mechanical Properties, Interlayer Interface and Durability
  37. Jiang Youbau, Liu Yan, Zhang Zupan, Gao Pengxiang et al. (2025-03)
    Tensile Performance of Interlayer Interface of Interlocking 3D Printed Concrete with Single Toothlike Nozzle
  38. Li Yifan, Chen Shuisheng, Yang Liuhua, Guo Chuan et al. (2025-02)
    Investigation of the Impact of Material Rheology on the Interlayer Bonding Performance of Solid Waste 3D-Printed Components
  39. Bayat Hamid, Karimpouli Sagegh, Yang Liming, Ramandi Hamed et al. (2025-02)
    Investigation of Interlayer Bonding and Pore Characteristics in 3D-Printed High-Strength Mortar Incorporating Recycled Lightweight Aggregates
  40. Chourasia Ajay, Pal Biswajit, Kapoor Ashish (2025-02)
    Influence of Printing Direction and Interlayer Printing Time on the Bond Characteristics and Hardened Mechanical Properties of Agro-Industrial Waste-Based 3D Printed Concrete
  41. Liu Xinhao, Hu Jiajun, Guo Xiaolu (2025-01)
    Improved Interlayer-Bonding of 3D Printed Fiber-Reinforced Geopolymer by Healing-Agents:
    Properties, Mechanism, and Environmental Impacts
  42. Peng Chengming, Yang Zhenjun, Li Hui (2024-10)
    A Predictive Model for Interlayer-Water-Evolution and Experimental Validation of 3D Printed Cementitious Materials
  43. Nishiwaki Tomoya, Miyata Yoshihiro, Furue Shoko, Fukatsu Shiko et al. (2021-11)
    Reinforcing Interlayers of Three-Dimensional-Printed Mortar Using Metal-Fiber-Insertion