Skip to content

#glass

Keywords by Co - Occurrence

  1. Janghorban Emad, Joshi Arpan, Gaspar Florindo (2026-04)
    Evaluating the Effect of Glass and Carbon Fiber Mesh on 3D-Printed Concrete Performance
  2. Wang Huai, Li Xiulin, Gong Hao, Wang Peijun et al. (2026-04)
    Thermal and Mechanical Properties of 3D Printed Lightweight Hollow Glass Microsphere Aggregate Concrete
  3. Ramakrishnan Sayanthan, Ramesh Akilesh, Pasupathy Kirubajiny, Mechtcherine Viktor et al. (2026-04)
    Enhancing the Printability and Sustainability of 3D Concrete Printing Using Recycled Waste Glass as a Cement Substitute
  4. Kolářová Mária, Kloužková Alexandra, Lauermannová Anna-Marie, Záleská Martina et al. (2026-03)
    Incorporation of Waste Glass Dust with Pigments Containing Cd, S, and Se into Magnesium Oxychloride Cement for Sustainable Production Using 3D Printing
  5. Li Long, Lu Shuaijie, Singh Amardeep, Hao Lucen et al. (2026-02)
    Improving Buildability and Reducing Carbon Emission of 3D Printed Concrete via CO2 Mixing and Waste Glass Powder:
    A Synergistic Approach
  6. Bong Shin, Zhao Yasong, Gao Yangyunzhi, Du Hongjian (2026-01)
    High-Volume Glass Powder Cementitious Material for Low-Carbon Concrete Additive Manufacturing
  7. Wang Huai, Xu Jingjie, Gong Hao, Wang Peijun et al. (2026-01)
    Behavior of Hollow Glass Microsphere Aggregate Concrete Composite Short Columns with 3D-Printed Permanent Formwork Under Axial Load
  8. Singh Amardeep, Sun Jingting, Qi Deng, Abden Md et al. (2026-01)
    Evaluating Glass Powder Substitution for 3D Printed Concrete:
    Effects on Thermal Properties and Embodied Carbon
  9. Li Jiannan, Singh Amardeep, Zhao Yasong, Sun Jingting et al. (2025-11)
    Enhancing Thermo-Mechanical and Moisture Properties of 3D-Printed Concrete Through Recycled Ultra-Fine Waste Glass Powder:
    Corrigendum
  10. Li Yeou-Fong, Lin Chih-Chieh, Syu Jin-Yuan, Huang Chih-Hong et al. (2025-10)
    Enhancing 3D-Printed Cement Mortar with Recycled PCB Glass Fibers:
    Printability, Mechanical Strength, and FEM-Based Structural Assessment
  11. Wang Huai, Li Xiulin, Gong Hao, Xu Jingjie et al. (2025-10)
    Thermal and Mechanical Properties of 3D-Printed Fiber-Reinforced Lightweight Concrete Based on Air Entrainment and Hollow Glass Microspheres
  12. Li Leo, Xiao Bofeng, Kou Shi-cong (2025-09)
    Influences of Fiber Length on the Printability and Strength of Glass Fiber-Reinforced 3D-Printed Mortar
  13. Lin Yini, Yan Jiachuan, Sun Ming, Tang Boyang et al. (2025-08)
    Effects of Waste Glass Powder on Printability, Hydration and Microstructure of 3D Printing Concrete
  14. Ramakrishnan Sayanthan, Pasupathy Kirubajiny, Manalo Allan, Sanjayan Jay (2025-07)
    Rheological, Mechanical and Fire Resistance Performance of Waste Glass Activated Geopolymers for Concrete 3D Printing
  15. Tarhan Yeşim, Tarhan İsmail, Perrot Arnaud (2025-05)
    Flexural Performance of Glass Fiber Textile Reinforced 3D Printed Concrete
  16. Salaimanimagudam M., Jayaprakash Jaganathan (2025-04)
    Effect of Nozzle Stand-Off Distance, Printing Interval, and Inclusion of Glass Fiber Mesh Reinforcement in 3D Printed Concrete
  17. Tran Mien, Le Thanh, Cao Nguyen, Nguyen Thi (2025-03)
    Sustainable Prospect for Entire Replacement of River Sand with Recycled Glass Aggregate in 3D Printing Concrete:
    Rheological Properties, Printability, and Alkali-Silica Reaction
  18. Li Jiannan, Singh Amardeep, Zhao Yasong, Sun Jingting et al. (2024-11)
    Enhancing Thermo-Mechanical and Moisture Properties of 3D Printed Concrete Through Recycled Ultra-Fine Waste-Glass-Powder
  19. Cuevas Villalobos Karla, Chung Sang-Yeop, Sikora Paweł, Stephan Dietmar (2024-10)
    Performance of Normal-Weight and Lightweight 3D Printed Cementitious Composites with Recycled Glass:
    Sorption and Microstructural Perspective
  20. Samrani Phebe, Cao Yifang, Fimbres-Weihs Gustavo, Sanjaya Eric et al. (2024-09)
    Effect of Fly-Ash and Ground Waste Glass as Cement Replacement in Concrete 3D Printing for Sustainable Construction
  21. Sheng Zhaoliang, Zhu Binrong, Cai Jingming, Han Jinsheng et al. (2024-09)
    Influence of Waste-Glass-Powder on Printability and Mechanical Properties of 3D Printing Geopolymer Concrete
  22. Pasupathy Kirubajiny, Ramakrishnan Sayanthan, Mechtcherine Viktor, Sanjayan Jay (2024-07)
    Alkali-Activated Waste Glass-Based Geopolymer Concrete for Digital Construction
  23. Wang Jun, Zhang Xuanzheng, Liu Zhenhua, Zhao Jiasheng (2024-07)
    Study on the Effects of Printing Process and Reinforcement Materials on the Performance of 3D-Printed Glass Bead Insulation Mortar
  24. Zhou Yiyi, Luo Haoran, Anand Kamal, Singh Amardeep et al. (2024-02)
    Sustainable Use of Ultrafine Recycled Glass in Additive Manufactured Reactive-Powder Concrete
  25. Li Te, Tier Laire (2023-09)
    Analysis of the Effect of Glass-Powder on the Printability of Cement-Based Materials for 3D Printing Using ImageJ
  26. Li Leo, Xiao Bofeng, Cheng Cong-Mi, Xie Hui-Zhu et al. (2023-09)
    Adding Glass-Fibers to 3D Printable Mortar:
    Effects on Printability and Material-Anisotropy
  27. Deng Qi, Zou Shuai, Xi Yonghui, Singh Amardeep (2023-06)
    Development and Characteristic of 3D Printable Mortar with Waste-Glass-Powder
  28. Shakor Pshtiwan, Nejadi Shami, Paul Gavin, Gowripalan Nadarajah (2023-04)
    Effects of Different Orientation-Angle, Size, Surface-Roughness, and Heat-Curing on Mechanical Behavior of 3D Printed Cement-Mortar with and without Glass-Fiber in Powder-Based 3DP
  29. Ting Guan, Quah Tan, Lim Jian, Tay Yi et al. (2022-01)
    Extrudable Region Parametrical Study of 3D Printable Concrete Using Recycled-Glass Concrete
  30. Kalthoff Matthias, Raupach Michael, Matschei Thomas (2021-12)
    Investigation into the Integration of Impregnated Glass and Carbon Textiles in a Laboratory Mortar Extruder (LabMorTex)
  31. Jin Yuan, Zhou Xiaolong, Chen Mingxu, Zhao Zhihui et al. (2021-11)
    High-Toughness 3D Printed White Portland-Cement-Based Materials with Glass-Fiber-Textile
  32. Liu Junli, Li Shuai, Gunasekara Chamila, Fox Kate et al. (2021-11)
    3D Printed Concrete with Recycled Glass:
    Effect of Glass Gradation on Flexural Strength and Microstructure
  33. Cuevas Villalobos Karla, Chougan Mehdi, Martin Falk, Ghaffar Seyed et al. (2021-05)
    3D Printable Lightweight Cementitious Composites with Incorporated Waste-Glass-Aggregates and Expanded Microspheres:
    Rheological, Thermal and Mechanical Properties
  34. Ting Guan, Tay Yi, Tan Ming (2021-04)
    Experimental Measurement on the Effects of Recycled Glass-Cullets as Aggregates for Construction 3D Printing
  35. Li Leo, Xiao Bofeng, Fang Z., Xiong Z. et al. (2020-11)
    Feasibility of Glass-Basalt Fiber-Reinforced Seawater Coral Sand Mortar for 3D Printing
  36. Shakor Pshtiwan, Nejadi Shami, Gowripalan Nadarajah (2020-07)
    Effect of Heat-Curing and E6-Glass Fiber-Reinforcement Addition on Powder-Based 3DP Cement Mortar
  37. Wang Weiqiang, Konstantinidis Nikolaos, Austin Simon, Buswell Richard et al. (2020-07)
    Flexural Behavior of AR-Glass-Textile-Reinforced 3D Printed Concrete Beams
  38. Shakor Pshtiwan, Nejadi Shami, Sutjipto Sheila, Paul Gavin et al. (2020-01)
    Effects of Deposition-Velocity in the Presence-Absence of E6-Glass-Fiber on Extrusion-Based 3D Printed Mortar
  39. Ting Guan, Tay Yi, Qian Ye, Tan Ming (2019-03)
    Utilization of Recycled Glass for 3D Concrete Printing:
    Rheological and Mechanical Properties
  40. Ting Andrew, Tay Yi, Annapareddy Ashokreddy, Li Mingyang et al. (2018-05)
    Effect of Recycled-Glass Gradation in 3D Cementitious Material-Printing
  41. Annapareddy Ashokreddy, Panda Biranchi, Ting Guan, Li Mingyang et al. (2018-05)
    Flow And Mechanical Properties of 3D Printed Cementitious Material With Recycled Glass-Aggregates