Skip to content

#energy

Keywords by Co - Occurrence

  1. Gencel Osman, Er Yusuf, Güler Onur, Ustaoğlu Abid et al. (2026-01)
    Replacing Natural Aggregates with Phase Change Material-Based 3D Printed Aggregates in Concrete for Structural Function and Dual Thermal Energy Storage
  2. Valdez-Cano R., González-López J., De-Los-Santos E., Mendoza‐Rangel J. et al. (2026-01)
    Alternative Silica Aerogel Mortar for Improving Energy Efficiency, Thermal Comfort, and Environmental Performance in Residential Buildings Under Hot-Dry Climates Using 3D Additive Manufacturing
  3. Pal Abhipsa, Wan-Wendner Lin (2025-10)
    3D Concrete Printing and Infill Patterns of Energy Efficient Structural Wall Elements
  4. Castro-Chincho Ana, Ivorra-Martinez Juan, Perejón Antonio, Sánchez-Jiménez Pedro et al. (2025-10)
    3D-Printed Mineral Limestone Structures for Calcium Looping Thermochemical Energy Storage:
    Reactivity and Performance Across Cycles
  5. Arumugam Girirajan, Kusumo Camerlia May Li, Mari Tamil (2025-09)
    Impact of Bioinspired Infill Pattern on the Thermal and Energy Efficiency of 3D Concrete Printed Building Envelope
  6. Liu Tong, Du Song, Teng Fei, Weng Yiwei (2025-08)
    Energy Consumption Modeling for a Robot Arm in 3D Concrete Printing
  7. Khan Hilal, Zahid Zamil, Hussain Fazal, Ahmad Junaid et al. (2025-08)
    Sustainable Multifunctional Biochar-Based Cementitious Composites for Carbon Sequestration, Energy Storage, and Smart Infrastructure Applications:
    A Review
  8. Rousan Rajai, Alnemrawi Bara'a, Abdalla Khairedin, Awawdeh Najemaldeen et al. (2025-06)
    Mitigation of Energy Crisis Worldwide Using 3D-Printed Concrete with Phase Change Materials
  9. Ye Huzi, He Qianpeng, Ping Pengxin, Pan Jinlong et al. (2025-06)
    Anisotropic Flexural Behavior and Energy Absorption of 3D Printed Engineered Cementitious Composites (3DP-ECC) Beams Under Low-Velocity Impact
  10. Rosa Marco, Brito Diogo, Vilas-Boas Rodrigo, Sousa José (2025-06)
    3DCP vs Conventional Construction:
    Comparative Analysis of Energy Performance and Embodied Carbon
  11. Qiao Zhigang, Li Hui, Wang Fei, Qi Yongle et al. (2025-04)
    Optimizing Thermal Energy Storage in 3D Printed Concrete with Hollow Ceramsite Composite Phase Change Materials
  12. Bayat Hamid, Kashani Alireza (2025-02)
    Reducing Material and Energy Consumption in Single-Story Buildings Through 3D-Printed Wall Designs
  13. Khan Shoukat, Koç Muammer (2025-01)
    Advancements in Additively Manufactured Safety Materials:
    Energy-Efficient 3D Printing Solutions for Critical Infrastructure
  14. Ahn Eunjong, Han Seongho, Shin Myoungsu, Khayat Kamal et al. (2025-01)
    Novel Method to Evaluate 3D Printed Concrete Quality Using Ultrasonic Scatter-Energy-Techniques
  15. Lyu Qifeng, Wang Yalun, Chen Dongjian, Liu Shiyuan et al. (2025-01)
    Energy Storage Properties and Mechanical Strengths of 3D Printed Porous Concrete Structural Supercapacitors Reinforced by Electrodes Made of Carbon-Black-Coated Ni Foam
  16. Curth Alexander, Alvarez Eduardo, Sass Lawrence, Norford Leslie et al. (2024-11)
    Additive Energy:
    3D Printing Thermally Performative Building Elements with Low-Carbon Earthen Materials
  17. Marchment Taylor (2024-09)
    Concrete 3D Printed Marine Wind, Solar and Energy Storage Support Structures
  18. Sovetova Meruyert, Kaiser Calautit John (2024-08)
    Thermal and Energy Efficiency in 3D Printed Buildings:
    Review of Geometric Design, Materials and Printing Processes
  19. Kajzr Daniel, Myslivec Tomáš, Černohorský Josef (2024-05)
    Modelling, Analysis and Comparison of Robot Energy Consumption for Three-Dimensional Concrete Printing Technology
  20. Dvorkin Leonid, Marchuk Vitaliy, Mróz Katarzyna, Maroszek Marcin et al. (2024-04)
    Energy-Efficient Mixtures Suitable for 3D Technologies
  21. Kotov Evgeny, Nemova Darya, Sergeev Vitaly, Dontsova Anna et al. (2024-03)
    Thermal Performance-Assessment of Aerogel Application in Additive Construction of Energy-Efficient Buildings
  22. Neri Manuela, Licciardello Lucia, Reggia Adriano, Pilotelli M. et al. (2024-01)
    Improving the Energy Performance of a 3D Printed Wall Using Recycled Material
  23. Khalilidermani Mitra, Knez Dariusz (2023-12)
    A Survey on Extraterrestrial Habitation Structures with a Focus on Energy-Saving 3D Printing Techniques
  24. Qamar Mu'ath, Yaghmour Emad, Wang Xingjian, Naito Clay et al. (2023-12)
    Use of 3D Printed Concrete Components for Thermal Energy Storage
  25. Imagawa Koichi, Ohno Motohiro, Ishida Tetsuya (2023-11)
    An Experimental Study on Energy-Absorption-Capability of Cast and 3D Printed Architected Cement-Based Materials
  26. Kumar Lalit, Panda Biranchi, Muthu Nelson (2023-10)
    A Simple Potential Energy Formulation for 3D Concrete Printed Structures Considering the Shear Effects in the Build-Direction
  27. Armstrong Kristina, Kamath Dipti, Zhao Xianhui, Rencheck Mitchell et al. (2023-07)
    Life Cycle Cost, Energy, and Carbon Emissions of Molds for Pre-Cast Concrete:
    Exploring the Impacts of Material-Choices and Additive Manufacturing
  28. Ravula Risheek, Gatheeshgar Perampalam (2023-07)
    On the Thermal-Energy Performance of 3D Printed Concrete Wall Panels Designed with Varying Insulation Ratios
  29. Rahemipoor Sahand, Hasany Masoud, Mehrali Mohammad, Almdal Kristoffer et al. (2023-07)
    Phase-Change-Materials Incorporation into 3D Printed Geopolymer Cement:
    A Sustainable Approach to Enhance the Comfort and Energy Efficiency of Buildings
  30. Samudrala Manideep, Mujeeb Syed, Lanjewar Bhagyashri, Chippagiri Ravijanya et al. (2023-05)
    3D Printable Concrete for Energy-Efficient Buildings
  31. Valente Marco, Sambucci Matteo, Chougan Mehdi, Ghaffar Seyed (2023-04)
    Composite Alkali-Activated Materials with Waste-Tire-Rubber Designed for Additive Manufacturing:
    An Eco-Sustainable and Energy Saving Approach
  32. Khalili Tari Mohammadreza, Reza Faraji Amir, Aslani Alireza, Zahedi Rahim (2023-01)
    Energy Simulation and Life Cycle Assessment of a 3D Printable Building
  33. Korniejenko Kinga, Setlak (nee Pławecka) Kinga, Kozub Barbara (2022-12)
    An Overview for Modern Energy-Efficient Solutions for Lunar and Martian Habitats Made Based on Geopolymers Composites and 3D Printing Technology
  34. Kamel Ehsan, Kazemian Ali (2022-11)
    BIM-Integrated Thermal Analysis and Building Energy Modeling in 3D Printed Residential Buildings
  35. Brooks Adam, He Yawen, Farzadnia Nima, Seyfimakrani Shayan et al. (2022-03)
    Incorporating PCM-Enabled Thermal Energy Storage into 3D Printable Cementitious Composites
  36. M’Lahfi Basma, Amegouz Driss, Qandil Mostafa (2022-01)
    New Printable Concrete Formulation Based on Fibers from Doum Palm Leaflets for 3D Printing of Energy-Efficient Buildings
  37. Suntharalingam Thadshajini, Upasiri Irindu, Gatheeshgar Perampalam, Poologanathan Keerthan et al. (2021-09)
    Energy Performance of 3D Printed Concrete Walls:
    A Numerical Study
  38. Haghighi Azadeh, Mohammed Abdullah, Wang Lihui (2021-06)
    Energy Efficient Multi-Robotic 3D Printing for Large-Scale Construction:
    Could This Technique Contribute to Sustainability of Future Buildings?
  39. Suntharalingam Thadshajini, Gatheeshgar Perampalam, Upasiri Irindu, Poologanathan Keerthan et al. (2021-02)
    Numerical Study of Fire and Energy Performance of Innovative Lightweight 3D Printed Concrete Wall-Configurations in Modular Building System
  40. Kurt Sibel, Atalay Yiğit, Aydın Ozan, Avcıoğlu Berrak et al. (2020-07)
    Design of Energy-Efficient White Portland Cement Mortars for Digital Fabrication
  41. He Yawen, Zhang Yamei, Zhang Chao, Zhou Hongyu (2020-05)
    Energy-Saving-Potential of 3D Printed Concrete Building with Integrated Living Wall
  42. Alkhalidi Ammar, Hatuqay Dina (2020-02)
    Energy Efficient 3D Printed Buildings:
    Material and Techniques Selection Worldwide Study
  43. Sanguinetti Paola, Almazam Khaled, Humaidan Omar, Colistra Joe et al. (2019-09)
    Evaluating the Potential of High-Performance Concrete 3D Printed Affordable Zero Energy Homes
  44. Biswas Kaushik, Rose James, Eikevik Leif, Guerguis Maged et al. (2016-11)
    Additive Manufacturing Integrated Energy:
    Enabling Innovative Solutions for Buildings of the Future