Skip to content

#production

Keywords by Co - Occurrence

  1. Luo Jintao, Zhang Li, Guan Xuemao, Yao Tianshuai et al. (2026-04)
    Recycling Molybdenum Tailings to Produce Eco-Friendly 3D-Printed Concrete:
    Rheological Properties, Mechanical Evolution and Internal Curing Mechanism
  2. Mostafavi Sina, Motejano-Hernandez Edgar, Bagheri Bahar, Etemadi Ali et al. (2026-04)
    Robotic Concrete 3D Printing Continuous Toolpath Planning:
    From Single Curve to Voxel-Based Systems for Design-to-Production of Urban Furnitures
  3. Kolářová Mária, Kloužková Alexandra, Lauermannová Anna-Marie, Záleská Martina et al. (2026-03)
    Incorporation of Waste Glass Dust with Pigments Containing Cd, S, and Se into Magnesium Oxychloride Cement for Sustainable Production Using 3D Printing
  4. Liu Jiaxu, Zhang Nan, Xie Xiangyu, Sanjayan Jay et al. (2026-02)
    Orientation and Spatial Distribution of Pores and Fibers in Concrete Elements Produced by Extrusion-Based 3D Printing
  5. Walzer Alexander, Kozlova Mariia, Mohite Ashish, Yeomans Julian et al. (2026-02)
    How to Scale a 3D Concrete Printing Facility?:
    A Stochastic Decision-Support Framework for Production Investment
  6. Sawicki Bartłomiej, Düking Peter, Placzek Gerrit, Masur Lukas et al. (2026-01)
    Human-Robot Collaboration in Digital Fabrication with Concrete:
    Quantifying Productivity and Psychophysiological Strain of Human Workers
  7. Nguyen Nhat, Javan Kazem, Jordan Adam, Akbarnezhad Ali et al. (2026-01)
    Techno-Economic Analysis of 3D Printed Modular Housing:
    Productivity, Cost, and Environmental Assessment
  8. Cojocari Iulia, Martins Mirna, Rangel Bárbara, Cunha Jaime (2026-01)
    Scaling 3D Printing for Large-Scale Production by Optimising Workflow
  9. Melero-Tur Sofía, Jiménez-Guerrero Adriano, Pérez-Fenoy José, Barbero-Barrera María (2026-01)
    Re-Imagining the Production of 3D Printed Ceramics Through the Incorporation of Waste Materials
  10. Garshasbi Sajad, Mousavi Seyed, Dehestani Mehdi, Nazarpour Hadi (2025-10)
    Sustainable Production of 3D Concrete Printing Using Agricultural Waste Fibers
  11. Huang Shuyi, Anton Ana-Maria, Dillenburger Benjamin, Xu Weiguo (2025-06)
    Lamella-Inspired 3D Concrete Printed Column-Slab System:
    Balancing Act for Productivity and Sustainability
  12. Sagyntay Mukhagali, Storch Florian, Mustafa Azamat, Plaschnick Paul et al. (2025-06)
    Automated Production of 3D Printed Сoncrete Structures with Integrated Reinforcement Mesh Based on Standard Reinforcement Bars
  13. Placzek Gerrit, Dahlberg Maike, Thormählen Jan, Schwerdtner Patrick (2025-06)
    How Productive Is 3D Concrete Printing?:
    A Systematic Review
  14. Radl Elisabeth, Pfleger Marc-Patrick, Sieh Alexander, Vill Markus (2025-06)
    Conceptual Design and Production of a 3D Printed Concrete Base Brick with Evaluation of Its Thermal Properties
  15. Dobrzanski James, Xu Jie, Bartek Rasti, Becker Daniel et al. (2025-04)
    From Digital Crafting to Digital Manufacturing:
    Automated Production Using Hybrid 3D Concrete Printing
  16. Rothe Tom, Gantner Stefan, Hack Norman, Hühne Christian (2024-11)
    Characterisation of the Alkaline-Resistance of Fiber-Reinforcement Strands Produced in a Dynamic Fiber Winding Process for 3D Concrete Printing
  17. Wang Li, Lin Wenyu, Wan Qian, Li Zhijian et al. (2024-11)
    Manufacturing Accuracy Improvement of Concrete Product by Hybrid Additive-Subtractive Method Based on the Time-Dependent Characteristics of Cementitious Materials
  18. Lindner Marco, Gliniorz Ralf, Funke Henrik, Männel Mike et al. (2024-10)
    Tool-Development for Pre-Cast Concrete Elements in Robot-Assisted Flow-Production
  19. Rudolph Enrico, Schönfelder Daniel, Funke Henrik, Gelbrich Sandra (2024-10)
    Efficient Production of Pre-Cast Concrete Staircases Using Additive-Manufactured, Component-Integrated Formworks Systems
  20. Abstoß Marvin, Funke Henrik, Gelbrich Sandra (2024-10)
    Sustainable Production of Complex Precast Concrete Elements Without Demolding Drafts Using Concrete Extrusion and Processing
  21. Pfleger Marc-Patrick, Sam Nina, Radl Elisabeth, Vill Markus (2024-09)
    Data-Driven Design-Process and Production of Stress-Optimized Concrete Girders with Integrated Tendons Using 3D Printing
  22. Lindner Marco, Gliniorz Ralf, Funke Henrik, Gelbrich Sandra (2024-09)
    Additive Flow Production of Lightweight Precision Concrete Elements
  23. Ivaniuk Egor, Tošić Zlata, Lordick Daniel, Mechtcherine Viktor (2024-09)
    Flow Production of Variable Curved Modules for Thin-Walled Concrete Shell Structures
  24. Romani Alessia, Levi Marinella (2024-09)
    Large-Format Material-Extrusion Additive Manufacturing for Circular Economy Practices:
    A Focus on Product-Applications with Materials from Recycled Plastics and Biomass-Waste
  25. Kamhawi Abdallah, Brown Jacob, Fahmy Ali, Meibodi Mania (2024-09)
    Waste-Free Production of Ultra-Thin Concrete Panels via Robotic 3D Printing and CNC Dynamic Bed Device
  26. Ammann Rebecca, Gebhard Lukas, Thoma Karel, Mata-Falcón Jaime et al. (2024-09)
    Environmental Benefits of Concrete Floor Slabs Produced with Digitally Fabricated Formworks:
    A Case Study
  27. Abstoß Marvin, Funke Henrik, Gelbrich Sandra (2024-09)
    Production of High-Precision Formwork Elements Using Parametrically Programmed Concrete-Extrusion and Machining
  28. Kromoser Benjamin, Gappmeier Peter, Ahmed Iyad, Reichenbach Sara (2024-09)
    A New Approach for Automated Design and Robot-Assisted Production of Structurally Optimised Reusable Concrete Building Elements
  29. Farhan Abdul, Xu Jie, Dobrzanski James, Kolawole John et al. (2024-09)
    Quantifying 3D Concrete Printing Production Waste
  30. Rudolph Enrico, Schönfelder Daniel, Funke Henrik, Gelbrich Sandra (2024-09)
    Efficient Production of Reinforced Pre-Cast Concrete Elements Using Additive Manufactured, Integrated Formwork
  31. Neef Tobias, Görtzen Tom, Niemeyer Alice, Mechtcherine Viktor (2024-09)
    Investigation of Digitally Produced, Interlocking Concrete Blocks for a Modular Slab Construction
  32. Buschmann Birger, Henke Klaudius, Asshoff Carsten, Talke Daniel et al. (2024-08)
    Additive Manufacturing of Wood-Composite-Parts by Individual Layer Fabrication:
    Influence of Process Parameters on Product Properties
  33. Hutyra Adam, Bańkosz Magdalena, Tyliszczak Bożena (2024-08)
    Technology for Automated Production of High-Performance Building Compounds for 3D Printing
  34. Babovic Neira, Laghi Vittoria, Kloft Harald (2024-07)
    Branching Structure for Reinforcement Anchorage Produced with Wire and Arc Additive Manufacturing Technique
  35. Assunção Badan Julie, Chadha Kunaljit, Vasey Lauren, Brumaud Coralie et al. (2024-06)
    Contribution of Production Processes in Environmental Impact of Low-Carbon Materials Made by Additive Manufacturing
  36. Berawi Mohammed, Sari Mustika, Oktaviani Astiti, Miraj Perdana et al. (2024-05)
    Impact of BIM and 3D Printing Technologies on Production Process and Productivity of Pre-Cast Concrete in Construction Project
  37. Capêto Ana, Jesus Manuel, Uribe Braian, Guimarães Ana et al. (2024-05)
    Building a Greener Future:
    Advancing Concrete Production Sustainability and the Thermal Properties of 3D Printed Mortars
  38. Bier Henriette, Hidding Arwin, Veer Frederic, Peternel Luka et al. (2024-04)
    Advancing Design-to-Robotic-Production and Assembly of Underground Habitats on Mars
  39. Ivaniuk Egor, Mechtcherine Viktor (2024-03)
    Approach for Production of Textile-Reinforced Beams and Slabs Using Three-Dimensional Concrete Printing
  40. Mengistu Girum, Nemes Rita (2024-01)
    Recycling 3D Printed Concrete Waste for Normal Strength Concrete Production
  41. Gelbrich Sandra, Abstoß Marvin, Rudolph Enrico, Funke Henrik (2023-12)
    Complex Concrete Elements for the Production of Recyclable Formwork by Extrusion and Milling
  42. Eugenin Claudia, Cuevas Villalobos Karla, Navarrete Iván (2023-12)
    Temperature-Dependance of 3D Printed Concrete Produced with Copper-Tailings
  43. Lindner Marco, Gliniorz Ralf, Männel Mike, Garbe Daniel et al. (2023-12)
    Tool-Developments for Additive Manufacturing-Processes with Anchor for the Modern Flow-Production
  44. Funke Henrik, Lindner Marco, Rudolph Enrico, Gelbrich Sandra (2023-12)
    Additive Manufacturing Technology for the Continuous Production of Precision Concrete Elements
  45. Carbone Carlo, Mohamed Basem (2023-11)
    From Analogue to Digital:
    Evolution of Building Machines Towards Reforming Production and Customization of Housing
  46. Genc Gokhan, Demircan Ruya, Beyhan Figen, Kaplan Gökhan (2023-10)
    Assessment of the Sustainability and Producibility of Adobe-Constructions Reinforced with Ca-Based Binders:
    Environmental Life-Cycle-Analysis and 3D Printability
  47. Beckers Jakob, Kalthoff Matthias, Cruz Cynthia, Matschei Thomas (2023-09)
    Possibilities of Extrusion-Production in Concrete Construction
  48. Beersaerts Glenn, Soete Jeroen, Giels Michiel, Eykens Lies et al. (2023-09)
    3D Printing of an Iron-Rich Slag-Based Hybrid Mortar:
    A Durable, Sustainable and Cost-Competitive Product?
  49. Tinoco Matheus, Mendoza Reales Oscar, Toledo Filho Romildo (2023-06)
    Rheological Behavior of 3D Printable Bio-Concretes Produced with Rice Husk
  50. Machovec Jan, Štádler Marek, Kamenický Josef, Reiterman Pavel (2022-09)
    Mechanical Properties of Concrete Lintel Produced by 3D Printing
  51. Abstoß Marvin, Rudolph Enrico, Funke Henrik, Gelbrich Sandra (2022-09)
    Near-Net-Shape-Extrusion and Milling of Complex Concrete Elements for the Production of Moulds
  52. Ivaniuk Egor, Tošić Zlata, Eichenauer Martin, Müller Steffen et al. (2022-09)
    Automated Production of Textile Reinforced Concrete Modules for the Assembly of Shell Structures
  53. Lindner Marco, Gliniorz Ralf, Funke Henrik, Gelbrich Sandra (2022-09)
    Robot-Assisted Flow-Production-Processes Tool-Development for the Fabrication of Thin-Walled Fiber-Reinforced Concrete Elements
  54. Ooms Ticho, Vantyghem Gieljan, Tao Yaxin, Bekaert Michiel et al. (2022-06)
    The Production of a Topology-Optimized 3D Printed Concrete Bridge
  55. Kovaleva Daria, Nistler Maximilian, Verl Alexander, Blandini Lucio et al. (2022-06)
    Zero-Waste Production of Lightweight Concrete Structures with Water-Soluble Sand Formwork
  56. Elistratkin Michail, Alfimova Nataliya, Podgorniy Daniil, Olisov Andrey et al. (2022-05)
    Influence of Equipment Operation Parameters on the Characteristics of a Track Produced with Construction 3D Printing
  57. Gimenez-Carbo Ester, Torres Raquel, Coll Hugo, Roig-Flores Marta et al. (2022-04)
    Preliminary Study of the Fresh and Hard Properties of UHPC That Is Used to Produce 3D Printed Mortar
  58. Kovaleva Daria, Nistler Maximilian, Blandini Lucio, Sobek Werner et al. (2022-04)
    Recyclable Sand Formwork:
    Towards Circular Production of Lightweight Concrete Structures
  59. Zöller Raphael, Ochlast Andreas, Zimmert Florian, Braml Thomas (2022-02)
    Development of Processes for the Automated Planning and Production of Individual Reinforced Concrete Elements
  60. Momeni Mahdi, Relefors Johan, Khatry Abubakar, Pettersson Lars et al. (2021-11)
    Automated Fabrication of Reinforcement Cages Using a Robotized Production Cell
  61. Placzek Gerrit, Brohmann Leon, Mawas Karam, Schwerdtner Patrick et al. (2021-11)
    A Lean-Based Production Approach for Shotcrete 3D Printed Concrete Components
  62. Dittel Gözdem, Scheurer Martin, Dringenberg Steffen, Jitton Joaquin et al. (2021-11)
    Digital Concrete Production with Vertical Textile Reinforcement
  63. Nodehi Mehrab, Asiabanpour Bahram, Omer Liam, Ozbakkaloglu Togay (2021-08)
    Material-Characterization of Diversity Aggregated Cementitious Materials Produced with a Modular Lightweight Additive Manufacturing Extrusion-System
  64. Oktaviani Astiti, Berawi Mohammed (2021-07)
    Implementation of 3D Concrete Printing Technology in Pre-Cast Concrete Mass Production Industry
  65. Katzer Jacek, Skoratko Aneta (2021-03)
    Concept of Using 3D Printing for Production of Concrete-Plastic Columns with Unconventional Cross-Sections
  66. Son Seunghyun, Oh Jinhyuk, Park Kwangheon, Kim Sunkuk (2020-10)
    Production Planning of Free-Form Concrete Panels Using 3D Plastering Technology
  67. Mai (née Dressler) Inka, Freund Niklas, Lowke Dirk (2020-07)
    Control of Strand Properties Produced with Shotcrete 3D Printing by Accelerator Dosage and Process Parameters
  68. Pekuss Raitis, Soto Borja (2020-07)
    Preliminary Productivity-Analysis of Conventional, Pre-Cast and 3D Printing Production-Techniques for Concrete Columns with Simple Geometry
  69. Scheurer Martin, Dittel Gözdem, Gries Thomas (2020-07)
    Potential for the Integration of Continuous-Fiber-Based Reinforcements in Digital Concrete Production
  70. Weng Yiwei, Li Mingyang, Ruan Shaoqin, Wong Teck et al. (2020-03)
    Comparative Economic, Environmental and Productivity-Assessment of a Concrete Bathroom Unit Fabricated Through 3D Printing and a Pre-Cast Approach
  71. Mechtcherine Viktor, Bos Freek, Perrot Arnaud, Silva Wilson et al. (2020-03)
    Extrusion-Based Additive Manufacturing with Cement-Based Materials:
    Production Steps, Processes, and Their Underlying Physics
  72. Torelli Giacomo, Fernández Mar, Lees Janet (2020-02)
    Functionally Graded Concrete:
    Design Objectives, Production Techniques and Analysis Methods for Layered and Continuously Graded Elements
  73. Markin Slava, Šahmenko Genādijs, Nerella Venkatesh, Näther Mathias et al. (2019-11)
    Investigations on the Foam-Concrete Production Techniques Suitable for 3D Printing with Foam-Concrete
  74. Taha Nizar, Walzer Alexander, Ruangjun Jetana, Bürgin Theophil et al. (2019-09)
    Robotic AeroCrete:
    A Novel Robotic Spraying and Surface Treatment Technology for the Production of Slender Reinforced Concrete Elements
  75. Mostafavi Sina, Kemper Benjamin, Du Chong (2019-08)
    Materializing Hybridity in Architecture:
    Design to Robotic Production of Multi-Materiality in Multiple Scales
  76. Nerella Venkatesh, Hempel Simone, Mechtcherine Viktor (2019-02)
    Effects of Layer-Interface Properties on Mechanical Performance of Concrete Elements Produced by Extrusion-Based 3D Printing
  77. Lloret-Fritschi Ena, Scotto Fabio, Gramazio Fabio, Kohler Matthias et al. (2018-09)
    Challenges of Real-Scale Production with Smart Dynamic Casting
  78. Soto Borja, Agustí-Juan Isolda, Hunhevicz Jens, Joss Samuel et al. (2018-05)
    Productivity of Digital Fabrication in Construction:
    Cost and Time-Analysis of a Robotically Built Wall
  79. Son Seunghyun, Lim Jeeyoung, Kim Sunkuk (2018-03)
    Planning Algorithms for In-Situ Production of Free-Form Concrete Panels
  80. Coenders Jeroen, Mathot Maarten, Martens Pascal, Bos Freek et al. (2017-12)
    Optimizing 3D Concrete Printing:
    Exploring Potentials and Limitations of Materials and Production