Skip to content

#dry

Keywords by Co - Occurrence

  1. Baghdadi Abtin, Kloft Harald (2026-04)
    Influence of Concrete Printing Techniques and Geometry on Shear-Compressive Capacity of Dry Concrete Joints
  2. Pessoa Sofia, Lucas Sandra, Simões Nuno, Guimarães Ana (2026-03)
    Drying Process in a 3D-Printed Multilayer Wall System:
    An Experimental and Numerical Analysis
  3. Omarov Bekarys, Ali Md., Memon Shazim (2026-03)
    A Novel Method to Enhance Interlayer Bond in 3D-Printed Concrete Using Dry-Powder Application of Supplementary Cementitious Materials
  4. Valdez-Cano R., González-López J., De-Los-Santos E., Mendoza‐Rangel J. et al. (2026-01)
    Alternative Silica Aerogel Mortar for Improving Energy Efficiency, Thermal Comfort, and Environmental Performance in Residential Buildings Under Hot-Dry Climates Using 3D Additive Manufacturing
  5. Baghdadi Abtin, Khanipour Raad Kian, Dörrie Robin, Kloft Harald (2025-12)
    Fabrication of Dry Connection Through Stamping and Milling of Green-State Concrete
  6. Raza Ali, Yuan Chengfang (2025-10)
    Degradation Mechanisms and Microstructural Performance of 3D-Printed Engineered Cementitious Composites with Yellow River Sand Under Chloride Ion Wet-Dry Cycles
  7. Abdelaziz Mohamed, Vukorep Ilija, Mahdy Deena (2025-07)
    Exploring Extreme 3D Printed Clay Overhangs with Integrated Active Hot Air Drying System on Robotic Arm
  8. Aman Abdulkerim, Yang Zhe, Xin Yubo, Zhang Xiaoman et al. (2025-04)
    Introducing Magnesium Oxide into 3D Printed Concrete to Mitigate Dry-Shrinkage
  9. Motamedi Mahan, Mesnil Romain, Tang Anh-Minh, Pereira Jean-Michel et al. (2024-11)
    Structural Build-Up of 3D Printed Earth by Drying
  10. Denis L., Omikrine-Metalssi O., Karam-Cabrerizo R., Barnes-Davin L. et al. (2024-09)
    Impact of Very Early-Age Drying on Printed Concrete Microstructures
  11. Keita Emmanuel, Zuo Wenqiang, Caneda-Martínez Laura, Aimedieu Patrick et al. (2024-09)
    X-Ray Tomography Insights into Early Drying Effects in 3D Concrete Printing
  12. Wolfs Robert, Gümrük Idil, Driessen Saar, Ferguson Matthew et al. (2024-09)
    3D Concrete Printing and Circularity:
    Designing, Testing, and Modelling Dry Joints for Structural Applications
  13. Zuo Wenqiang, Caneda-Martínez Laura, Keita Emmanuel, Aimedieu Patrick et al. (2024-08)
    Drying-Induced Damages in Exposed Fresh Cement-Based Materials at Very Early-Ages:
    From Standard Casting to 3D Printing
  14. Gonzales Betty, Zavaleta Diana, Bertolotti Bruno, Aguilar Rafael et al. (2024-07)
    Comprehensive Investigation into the Influence of Soil Composition and Water Content on Cracking Due to Drying Shrinkage in 3D Printed Earthen Structures
  15. Labuda Igor, Pugliese Federica, Dzwierzynska Jolanata (2024-03)
    An Innovative Concept for 3D Sand-Printed Sustainable Refugee Shelters in a Sandy Desert in a Hot and Dry Climate
  16. Baghdadi Abtin, Ledderose Lukas, Ameri Shaghayegh, Kloft Harald (2023-02)
    Experimental and Numerical Assessments of New Concrete Dry Connections Concerning Potentials of Robotic CNC Manufacturing Technique
  17. Baghdadi Abtin, Heristchian Mahmoud, Ledderose Lukas, Kloft Harald (2023-01)
    Experimental and Numerical Assessments of New Concrete Dry Connections Concerning Potentials of the Robotic Subtractive Manufacturing Technique
  18. Ghantous Rita, Valadez-Carranza Yvette, Reese Steven, Weiss William (2022-06)
    Impact of Drying of 3D Printed Cementitious Pastes on Their Degree of Hydration
  19. Ghantous Rita, Valadez-Carranza Yvette, Reese Steven, Weiss William (2022-06)
    Drying Behavior of 3D Printed Cementitious Pastes Containing Cellulose-Nano-Crystals
  20. Zhang Hanghua, Xiao Jianzhuang, Duan Zhenhua, Zou Shuai et al. (2022-06)
    Effects of Printing Paths and Recycled Fines on Drying Shrinkage of 3D Printed Mortar
  21. Lanwer Jan-Paul, Weigel Hendrik, Baghdadi Abtin, Empelmann Martin et al. (2022-04)
    Jointing Principles in AMC:
    Design and Preparation of Dry Joints
  22. Ma Lei, Zhang Qing, Jia Zijian, Liu Chao et al. (2021-11)
    Effect of Drying Environment on Mechanical Properties, Internal RH and Pore-Structure of 3D Printed Concrete
  23. Zuo Wenqiang, Keita Emmanuel, Bornert Michel, Roussel Nicolas (2020-07)
    Drying of 3D Printed Mortar Filaments at Early-Age Assessed by X-Ray Computed Tomography