Skip to content

Environmental Profile of 3D Concrete Printing Technology in Desert Areas via Life Cycle Assessment (2023-02)

10.1016/j.jclepro.2023.136412

Zhang Ruo-Chen,  Wang Li, Xue Xuan,  Ma Guowei
Journal Article - Journal of Cleaner Production

Abstract

Three-dimensional concrete printing (3DCP) offers a particularly advantageous construction method in harsh environments, such as desert areas that experience shortages of building materials and labor. Evaluating the environmental impacts of 3DCP in remote areas is essential for substantification and thus practical application of this technology. Therefore, life cycle assessment against conventional construction was conducted in this study to determine the environmental profile of 3DCP in desert areas considering different reinforcement methods and aggregates. The comparison results indicate that 3DCP is more sustainable owing to its lower potential for freshwater ecotoxicity, particular matter formation, human toxicity, ozone depletion, and eutrophication. The environmental friendliness of using in-situ desert sand for 3DCP depends on the material delivery distance. Electricity consumption also influences the environmental impact of 3DCP. Although 3DCP is promising as an environmentally friendly construction method for use in remote areas, technological updates and energy supply adjustment and justification remain essential.

19 References

  1. Agustí-Juan Isolda, Müller Florian, Hack Norman, Wangler Timothy et al. (2017-04)
    Potential Benefits of Digital Fabrication for Complex Structures:
    Environmental Assessment of a Robotically Fabricated Concrete Wall
  2. Alhumayani Hashem, Gomaa Mohamed, Soebarto Veronica, Jabi Wassim (2020-06)
    Environmental Assessment of Large-Scale 3D Printing in Construction:
    A Comparative Study between Cob and Concrete
  3. Bai Gang, Wang Li, Ma Guowei, Sanjayan Jay et al. (2021-03)
    3D Printing Eco-Friendly Concrete Containing Under-Utilised and Waste Solids as Aggregates
  4. Bai Gang, Wang Li, Wang Fang, Ma Guowei (2021-08)
    In-Process Reinforcing Method:
    Dual 3D Printing Procedure for Ultra-High-Performance Concrete Reinforced Cementitious Composites
  5. Grassi Giulia, Lupica Spagnolo Sonia, Paoletti Ingrid (2019-05)
    Fabrication and Durability Testing of a 3D Printed Façade for Desert Climates
  6. Han Yilong, Yang Zhihan, Ding Tao, Xiao Jianzhuang (2020-08)
    Environmental and Economic Assessment on 3D Printed Buildings with Recycled Concrete
  7. Li Zhijian, Wang Li, Ma Guowei (2020-01)
    Mechanical Improvement of Continuous Steel-Micro-Cable-Reinforced Geopolymer Composites for 3D Printing Subjected to Different Loading Conditions
  8. Li Zhijian, Wang Li, Ma Guowei, Sanjayan Jay et al. (2020-07)
    Strength and Ductility Enhancement of 3D Printing Structure Reinforced by Embedding Continuous Micro-Cables
  9. Liu Siyu, Lu Bing, Li Hongliang, Pan Zehua et al. (2022-03)
    A Comparative Study on Environmental Performance of 3D Printing and Conventional Casting of Concrete Products with Industrial Wastes
  10. Ma Guowei, Salman Nazar, Wang Li, Wang Fang (2020-02)
    A Novel Additive Mortar Leveraging Internal Curing for Enhancing Inter-Layer Bonding of Cementitious Composite for 3D Printing
  11. Mai (née Dressler) Inka, Brohmann Leon, Freund Niklas, Gantner Stefan et al. (2021-10)
    Large Particle 3D Concrete Printing:
    A Green and Viable Solution
  12. Mohammad Malek, Masad Eyad, Ghamdi Sami (2020-12)
    3D Concrete Printing Sustainability:
    A Comparative Life Cycle Assessment of Four Construction Method Scenarios
  13. Muñoz Ivan, Madrid Javier, Muñiz Manuel, Uhart Maylis et al. (2021-01)
    Life Cycle Assessment of Integrated Additive-Subtractive Concrete 3D Printing
  14. Ngo Tuan, Kashani Alireza, Imbalzano Gabriele, Nguyen Quynh et al. (2018-02)
    Additive Manufacturing (3D Printing):
    A Review of Materials, Methods, Applications and Challenges
  15. Souza Marcelo, Ferreira Igor, Moraes Elisângela, Senff Luciano et al. (2020-09)
    3D Printed Concrete for Large-Scale Buildings:
    An Overview of Rheology, Printing Parameters, Chemical Admixtures, Reinforcements, and Economic and Environmental Prospects
  16. Tinoco Matheus, Mendonça Érica, Fernandez Letízia, Caldas Lucas et al. (2022-04)
    Life Cycle Assessment and Environmental Sustainability of Cementitious Materials for 3D Concrete Printing:
    A Systematic Literature Review
  17. Weng Yiwei, Li Mingyang, Ruan Shaoqin, Wong Teck et al. (2020-03)
    Comparative Economic, Environmental and Productivity-Assessment of a Concrete Bathroom Unit Fabricated Through 3D Printing and a Pre-Cast Approach
  18. Xiao Jianzhuang, Ji Guangchao, Zhang Yamei, Ma Guowei et al. (2021-06)
    Large-Scale 3D Printing Concrete Technology:
    Current Status and Future Opportunities
  19. Yao Yue, Hu Mingming, Maio Francesco, Cucurachi Stefano (2019-08)
    Life Cycle Assessment of 3D Printing Geopolymer Concrete:
    An Ex‐Ante Study

19 Citations

  1. Varghese Renny, Rangel Bárbara, Maia Lino (2025-10)
    Strength, Structure, and Sustainability in 3D-Printed Concrete Using Different Types of Fiber Reinforcements
  2. Mahdy Deena, Marais Eugene, Abdelrahim Marwa, Dubor Alexandre et al. (2025-06)
    Life Cycle Assessment of Earth-Based Residential Unit “TOVA”:
    A 3D Printed On-Site Load-Bearing Structure
  3. Wang Guihua, Zhou Jiguo, Liu Haoyun, Zhang Jianming (2025-05)
    Rheological Properties and Mechanical Durability of 3D-Printed Concrete Based on Low-Field NMR
  4. Arash Motalebi, Mohammad Aba, Golam Kabir (2025-01)
    Assessing the Environmental Impact of Building Houses in Remote Areas:
    3D Printing vs. Traditional Construction Techniques
  5. Zhang Yonghong, Cui Suping, Wang Xinxin, Yang Bohao et al. (2025-01)
    Microstructure and Performance of Recycled Wind Turbine Blade-Based 3D Printed Concrete
  6. Venugopal Reddy P., Nakkeeran G., Roy Dipankar, Alaneme George (2024-11)
    Evaluating the Use of Recycled Fine Aggregates in 3D Printing:
    A Systematic Review
  7. Habibi Alireza, Buswell Richard, Osmani Mohamed, Aziminezhad Mohamadmahdi (2024-11)
    Sustainability Principles in 3D Concrete Printing:
    Analysing Trends, Classifying Strategies, and Future Directions
  8. Motalebi Arash, Khondoker Mohammad, Kabir Golam (2024-10)
    Sustainable Structures Unveiled:
    Navigating the Environmental Landscape of 3D Printing in Construction
  9. Shen Kaige, Ding Tao, Cai Chen, Xiao Jianzhuang et al. (2024-09)
    Feasibility-Analysis of 3D Printed Concrete with Sludge-Incineration-Slag:
    Mechanical Properties and Environmental Impacts
  10. Shivendra Bandoorvaragerahalli, Sharath Chandra Sathvik, Singh Atul, Kumar Rakesh et al. (2024-09)
    A Path Towards SDGs:
    Investigation of the Challenges in Adopting 3D Concrete Printing in India
  11. Ye Junhong, Zhuang Zicheng, Teng Fei, Yu Jie et al. (2024-07)
    Comparative Environmental-Assessment of 3D Concrete Printing with Engineered Cementitious Composites
  12. Anandaraj S., Sowmya S., Krishnaraja A., Mithun T. (2024-03)
    Development of Green Engineered Cementitious Composite Using Fly-Ash and Nano-Silica for 3D Printing
  13. Lu Yue, Xiao Jianzhuang, Li Yan (2024-03)
    3D Printing Recycled Concrete Incorporating Plant-Fibers:
    A Comprehensive Review
  14. Zhu Binrong, Wang Yufei, Sun Junbo, Wei Yang et al. (2023-10)
    An Experimental Study on the Influence of Waste-Rubber-Particles on the Compressive, Flexural and Impact Properties of 3D Printable Sustainable Cementitious Composites
  15. Zhou Wen, McGee Wesley, Gökçe H., Li Victor (2023-08)
    A Bio-Inspired Solution to Alleviate Anisotropy of 3D Printed Engineered Cementitious Composites (3DP-ECC):
    Knitting/Tilting Filaments
  16. Wang Hao, Jiang Minghui, Hang Meiyan, Zhou Gangming et al. (2023-07)
    Research on the Mechanical Properties and Frost-Resistance of Aeolian Sand 3D Printed Mortar
  17. McCoy Andrew, Vieira Manuel, Oliveira Miguel, Yanamala Akhileswar et al. (2023-07)
    3D Concrete Printing:
    Factors Affecting the US and Portugal
  18. Jones Kathryn, Li Mo (2023-06)
    Life Cycle Assessment of Ultra-Tall Wind Turbine Towers Comparing Concrete Additive Manufacturing to Conventional Manufacturing
  19. Fernandez Letízia, Caldas Lucas, Mendoza Reales Oscar (2023-05)
    Environmental Evaluation of 3D Printed Concrete Walls Considering the Life Cycle Perspective in the Context of Social Housing

BibTeX 
@article{zhan_wang_xue_ma.2023.EPo3CPTiDAvLCA,
  author            = "Ruo-Chen Zhang and Li Wang and Xuan Xue and Guowei Ma",
  title             = "Environmental Profile of 3D Concrete Printing Technology in Desert Areas via Life Cycle Assessment",
  doi               = "10.1016/j.jclepro.2023.136412",
  year              = "2023",
  journal           = "Journal of Cleaner Production",
}
Formatted Citation

R.-C. Zhang, L. Wang, X. Xue and G. Ma, “Environmental Profile of 3D Concrete Printing Technology in Desert Areas via Life Cycle Assessment”, Journal of Cleaner Production, 2023, doi: 10.1016/j.jclepro.2023.136412.

Zhang, Ruo-Chen, Li Wang, Xuan Xue, and Guowei Ma. “Environmental Profile of 3D Concrete Printing Technology in Desert Areas via Life Cycle Assessment”. Journal of Cleaner Production, 2023. https://doi.org/10.1016/j.jclepro.2023.136412.