Skip to content

#measurement

Keywords by Co - Occurrence

  1. Federowicz Karol, Sibera Daniel, Tošić Nikola, Zieliński Adam et al. (2026-01)
    Early-Age Shrinkage Monitoring of 3D-Printed Cementitious Mixtures: Comparison of Measuring Techniques and Low-Cost Alternatives
  2. Mansouri Abraham, Mourad Bahaa, Birhane Bezawit, Denbel Nuhamin et al. (2025-11)
    Noncontact Measurement of Thermal Resistance in 3D Concrete Printing Building Envelopes Using Infrared Sensing and Arduino
  3. Banijamali Kasra, Martin Michael, Mascarenas David, Kazemian Ali (2025-11)
    Automated Inspection in Robotic 3D Printing:
    In-Process Geometrical Measurements Using Structured Light Machine Vision
  4. Ishikawa Shinichi, Yamada Ryo, Tasaki Ryosuke (2025-07)
    High-Sensitivity Interlayer Force Measurement and Multi-Layer Smoothing Control for 3D Printing on Uneven Surfaces
  5. Kontovourkis Odysseas, Georgiou Christos, Andreou Alexis, Andreou Vasilis et al. (2025-06)
    Measuring and Evaluating Layer Height to Width Ratio in 3DCP Towards Higher Geometric Conformity
  6. Fasihi Ali, Libre Nicolas (2025-05)
    Towards Accurate In-Situ Static Yield Stress Measurement for 3D Concrete Printing:
    A Study on Novel Fast Penetration Test
  7. Bang Jin, Yim Hong (2024-10)
    Unbonded Inter-Layer Evaluation in Freshly 3D Printed Concrete Using Electrical Resistivity Measurements
  8. Nakanishi Reina, Ogura Hiroki, Yamamoto Shinya, Abe Hiroyuki et al. (2024-10)
    Design and Development of a Shape Measurement System for 3D Construction Printing with a Manipulator
  9. Ivaniuk Egor, Mechtcherine Viktor (2024-09)
    A Method for Measuring the Bond Strength Between Impregnated Carbon-Yarn and 3D Printed Strain-Hardening Cementitious Composites
  10. Gill Connor, Justham Laura, Lohse Niels, Haynes Adam et al. (2024-09)
    Measurement and Control of Serial Manipulator Robots for 3D Concrete Printing
  11. Rehman Atta, Kang Seungwoo, Kim Jung-Hoon (2024-09)
    Nozzle-Integrated Slump-Scanner-Test:
    Development of an Automated Shape-Stability and Instantaneous Yield-Stress-Measurement-Method for the Set-on-Demand 3D Concrete Printing
  12. Demont Léo, Mesnil Romain, Caron Jean-François (2024-09)
    Structuration-Rate-Measurement Using a Digital Pocket Vane
  13. Zat Tuani, Schmitt Duarte Ester, Webber Jaine, Matos Paulo et al. (2024-09)
    Comparison Between Yield-Stress-Measurements for Fiber-Reinforced 3D Concrete Printing
  14. Muy Yeakleang, Courard Luc, Bulteel David, Rémond Sébastien et al. (2024-09)
    Influence of Nozzle-Diameter on the Anisotropy of Compressive Strength:
    Measured on 3D Printing Concrete Designed with Recycled Fine Aggregates
  15. Jeyifous Olubunmi, Schönsee Eric, Strangfeld Christoph, Hüsken Götz (2024-09)
    Correlation of Continuously Measured In-Line Process Parameters and Extruded Geometry in 3D Concrete Printing Experiments
  16. Zhang Qing, Bégaud Fabienne, Khatib Omar (2024-09)
    Quantitative Comparison of Elastic Modulus Measurement Techniques in Early-Age 3D Printable Mortar:
    Insights from Compression, Ultrasonic, and Microindentation Methods
  17. Kurup Davya, Rahul Attupurathu (2024-09)
    Early-Age Shrinkage Measurement in 3D Printed Con-Crete by Digital Image Correlation:
    Influence of Spray Paints
  18. Rehman Atta, Kang Manmin, Basha Shaik, Choi Kichang et al. (2024-09)
    Knife-Cut-Test of Concrete:
    The Introduction of a New Test-Method for Measurement of the Structural Build-Up of 3D Concrete Printing-Materials
  19. Tamimi Adil, Hassan Habibelrahman, Rodriguez-Ubinas Edwin, Alhaidary Haidar et al. (2023-11)
    Thermal Performance of 3D Concrete Printed Walls:
    Calculated and In-Situ Measured U-Values
  20. Demont Léo, Mesnil Romain, Ducoulombier Nicolas, Caron Jean-François (2023-10)
    Affordable In-Line Structuration Measurements of Printable Mortar with a Pocket-Shear-Vane
  21. Zuo Zibo, Corte Wouter, Huang Y., Zhang L. et al. (2023-08)
    Measurement of the Density of Formed Structures for Concrete 3D Printing
  22. Zhang Hanghua, Hao Lucen, Zhang Shipeng, Xiao Jianzhuang et al. (2023-08)
    Advanced Measurement Techniques for Plastic Shrinkage and Cracking in 3D Printed Concrete Utilising Distributed Optical Fiber Sensor
  23. Tran Mien, Vu Tran, Nguyen Thi (2023-01)
    Simplified Assessment for One-Part 3D Printable Geopolymer Concrete Based on Slump and Slump-Flow Measurements
  24. Markin Slava, Mechtcherine Viktor (2023-01)
    Methods for Measuring Plastic Shrinkage and Related Cracking of 3D Printed Concrete
  25. Briels David, Kollmannsberger Stefan, Leithner Felicitas, Matthäus Carla et al. (2022-07)
    Thermal Optimization of Additively Manufactured Lightweight Concrete Wall Elements with Internal Cellular Structure through Simulations and Measurements
  26. Markin Slava, Mechtcherine Viktor (2022-06)
    Measuring Plastic Shrinkage and Related Cracking of 3D Printed Concretes
  27. Kuzmenko Kateryna, Ducoulombier Nicolas, Féraille Adélaïde, Roussel Nicolas (2022-05)
    Environmental Impact of Extrusion-Based Additive Manufacturing:
    Generic Model, Power-Measurements and Influence of Printing-Resolution
  28. Wangler Timothy, Flatt Robert, Roussel Nicolas, Perrot Arnaud et al. (2022-01)
    Printable Cement-Based Materials:
    Fresh Properties Measurements and Control
  29. Xu Emily, Tejada Karin, Walker David, Zivkovic Sasa et al. (2021-11)
    Measuring Flow- and Setting-Time for Three-Dimensionally Printed Mortar:
    Case Study
  30. Ting Guan, Tay Yi, Tan Ming (2021-04)
    Experimental Measurement on the Effects of Recycled Glass-Cullets as Aggregates for Construction 3D Printing
  31. Heifetz Alexander, Shribak Dmitry, Bakhtiari Sasan, Aranson Igor et al. (2021-03)
    Qualification of 3D Printed Mortar with Electrical Conductivity Measurements
  32. Lesovik Valeriy, Glagolev Evgeniy, Elistratkin Michail, Podgorniy Daniil (2021-01)
    On the Issue of Measuring the Strength of Additively Manufactured Concrete
  33. Hou Shaodan, Duan Zhenhua, Xiao Jianzhuang, Ye Jun (2020-12)
    A Review of 3D Printed Concrete:
    Performance-Requirements, Testing Measurements and Mix-Design
  34. Reiter Lex, Wangler Timothy, Anton Ana-Maria, Flatt Robert (2020-05)
    Setting-on-Demand for Digital Concrete:
    Principles, Measurements, Chemistry, Validation
  35. Jayathilakage Roshan, Sanjayan Jay, Rajeev Pathmanathan (2019-12)
    Comparison of Rheology Measurement Techniques Used in 3D Concrete Printing Applications
  36. Yuan Qiang, Li Zemin, Zhou Dajun, Huang Tingjie et al. (2019-08)
    A Feasible Method for Measuring the Buildability of Fresh 3D Printing Mortar
  37. Keita Emmanuel, Bessaies-Bey Hela, Zuo Wenqiang, Belin Patrick et al. (2019-06)
    Weak Bond Strength Between Successive Layers in Extrusion-Based Additive Manufacturing:
    Measurement and Physical Origin
  38. Nerella Venkatesh, Beigh Mirza, Fataei Shirin, Mechtcherine Viktor (2018-11)
    Strain-Based Approach for Measuring Structural Build-Up of Cement-Pastes in the Context of Digital Construction
  39. Wolfs Robert, Bos Freek, Salet Theo (2018-06)
    Correlation Between Destructive Compression Tests and Non-Destructive Ultrasonic Measurements on Early-Age 3D Printed Concrete
  40. Liu Zhixin, Li Mingyang, Wong Teck, Tan Ming (2018-05)
    Measurement of the Fresh Rheological Properties of Material in 3D Printing
  41. Panda Biranchi, Paul Suvash, Mohamed Nisar, Tay Yi et al. (2017-09)
    Measurement of Tensile Bond Strength of 3D Printed Geopolymer Mortar
  42. Ma Guowei, Wang Li (2017-08)
    A Critical Review of Preparation Design and Workability Measurement of Concrete Material for Large-Scale 3D Printing
  43. Wolfs Robert, Bos Freek, Strien Emiel, Salet Theo (2017-06)
    A Real-Time Height Measurement and Feedback System for 3D Concrete Printing