#fine¶
Keywords by Co - Occurrence¶
- Topolář Libor, Pazdera Luboš, Dvořák Karel, Černý Felix et al. (2026-04)
Acoustic Emission Analysis of Tensile Failure in Layered 3D-Printed Fibre-Reinforced Fine-Grained Concrete - Yuan Pu, Wang Xinjie, Huang Jie, Shi Quanbin et al. (2026-04)
Feasibility, Mechanical Properties, and Environmental Impact of 3D-Printed Mortar Incorporating Recycled Fine Aggregates from Decoration and Renovation Waste - Oh Gyujong, Oh Sangwoo, Choi Seongcheol (2026-02)
Carbonated Basic Oxygen Furnace Slag Fine Aggregate in Concrete:
Laboratory Assessment and Sustainable Application in 3D-Printed Concrete Components - Neef Tobias, Butler Marko, Mechtcherine Viktor (2026-02)
Methodology for Integrating Mineral-Impregnated Carbon Fibers as Reinforcement in Fine Filament 3D Concrete Printing - Tafur Ginette, Rivera Cristhofer, Torres Pablo (2026-02)
Evaluation of Sustainable 3D Concrete with Partial Replacement of Fine Aggregate by PET and Addition of Coconut Fibers:
Impact on Construction with the Use of 3D Gantry-Type Printers in Peru - Qureshi Mohsin, Shizawi Amira, Kindi Ghassan, Sawafi Bushra et al. (2026-01)
Development of Cementitious Material by Incorporating Fine Waste Materials for Testing in Newly Developed Portable Concrete 3D Printer - Tinoco Matheus, Lima Moura Paiva Rayane, Andrade Luiza, Mendoza Reales Oscar (2025-12)
Hybrid 3D Printable Mixtures Incorporating Fine Earth, Portland Cement, and Fly Ash:
A Sustainable Alternative to Cement-Intensive Systems - Sikora Paweł, Federowicz Karol, Skibicki Szymon, Techman Mateusz et al. (2025-11)
Demonstration of 3D-Printed Concrete Containing Fine Recycled Concrete Aggregates and Recycled Concrete Powder:
Rheology, Early-Age, Shrinkage, Mechanical, and Durability Performance. - Li Jiannan, Singh Amardeep, Zhao Yasong, Sun Jingting et al. (2025-11)
Enhancing Thermo-Mechanical and Moisture Properties of 3D-Printed Concrete Through Recycled Ultra-Fine Waste Glass Powder:
Corrigendum - Haripan Vislavath, Senthilnathan Shanmugaraj, Santhanam Manu, Raphael Benny (2025-10)
Printability Assessment of Concrete 3D Printed Elements with Recycled Fine Aggregate - Ravichandran Darssni, Prem Prabhat, Bhaskara Gollapalli, Maheswaran Srinivasan et al. (2025-07)
Time-Dependent Properties of 3D Printable Plain and Fibered High Strength Concrete Incorporating Copper Slag as an Alternate Fine Aggregate - Ma Jinyi, Zhang Haiyan, Wang Yanzhi, Xiong Lu et al. (2025-07)
Effect of Clay Brick Powder and Recycled Fine Aggregates on Properties of 3D Printed Concrete After High Temperature Exposure - Mim Nusrat, Hosan Anwar, Shaikh Faiz, Sarker Prabir (2025-07)
Rheological and Early Age Mechanical Properties of 3D Printed Concrete Containing Copper Heap Leach Residue as Fine Aggregate - Hermida José, Saavedra Ruth, Hidalgo-Astudillo Samantha, Tošić Nikola et al. (2025-06)
Influence of Fine Recycled Aggregates on the Properties of 3D Printing Concrete - Sbardelotto Eduardo, Vieira Manuel, Ferreira dos Santos Karyne, Pereira dos Santos Samuel et al. (2025-06)
Exploratory Study on the Rheological Behaviour of 3D Printable Mortars Incorporating Fine Recycled Concrete Aggregates (FRCA) - Pei Qiang, Zhong Yingzhu, Wang Shuai, Zhang Luxi et al. (2025-06)
Interlayer Bonding Shear Performance and Constitutive Model of 3DPC with Different Fine Aggregate Gradations - Kumar Sandeep, Kumar Abhishek, Pundir Aakanksha, Dwivedi Ashutosh et al. (2025-06)
Low-Clay Soil as Fine Aggregate in 3D Printed Concrete:
Insights into Fresh and Hardened Properties - Jia Lutao, Dong Enlai, Xia Kailun, Niu Geng et al. (2025-04)
Initial Plastic Shrinkage of 3D-Printed Concrete Incorporating Recycled Brick Fine Aggregates:
Insights from Water Transport and Structural Evolution - Mim Nusrat, Shaikh Faiz, Sarker Prabir (2025-03)
Sustainable 3D Printed Concrete Incorporating Alternative Fine Aggregates:
A Review - Pepe Marco, Lombardi Rosario, Lima Carmine, Paolillo Bruno et al. (2025-01)
Experimental Evidence on the Possible Use of Fine Concrete and Brick Recycled Aggregates for 3D Printed Cement-Based Mixtures - Vlieger Jentel, Blaakmeer Jan, Gruyaert Elke, Cizer Özlem (2025-01)
Assessing Static and Dynamic Yield-Stress of 3D Printing Mortar with Recycled Sand:
Influence of Sand-Geometry, Fineness Modulus, and Water-to-Binder Ratio - Vargas Armando, Robayo-Salazar Rafael, Gutiérrez Ruby (2024-12)
Effects of Incorporating Fine Aggregates and Polypropylene-Micro-Fibers on the Cracking-Control of 3D Printed Cementitious Mixtures - Huang Bo, Ge Yutian, Wang Xiangyu, Wang Yufei et al. (2024-11)
Recycled Ceramic-Brick-Powder Utilization in Fiber-Reinforced 3D Printing Concrete:
An Eco-Friendly Substitute to Conventional Fine Aggregates - Venugopal Reddy P., Nakkeeran G., Roy Dipankar, Alaneme George (2024-11)
Evaluating the Use of Recycled Fine Aggregates in 3D Printing:
A Systematic Review - Li Jiannan, Singh Amardeep, Zhao Yasong, Sun Jingting et al. (2024-11)
Enhancing Thermo-Mechanical and Moisture Properties of 3D Printed Concrete Through Recycled Ultra-Fine Waste-Glass-Powder - Aldabergenova Gaziza, Jexembayeva Assel, Konkanov Marat, Kirgizbayev Akpan et al. (2024-09)
The Efficient Waste-Based Fine-Grained Fiber Concretes for 3D Printing - Sikora Paweł, Federowicz Karol, Techman Mateusz, Skibicki Szymon (2024-09)
Fine Recycled Concrete Aggregates in 3D Printed Concrete - Haripan Vislavath, Senthilnathan Shanmugaraj, Gettu Ravindra, Santhanam Manu et al. (2024-09)
Open-Time and Extrudability-Performance-Analysis of 3D Printed Concrete with Recycled Concrete Fine Aggregates Using Rheological- and Computer-Vision-Techniques - Muy Yeakleang, Courard Luc, Bulteel David, Rémond Sébastien et al. (2024-09)
Influence of Nozzle-Diameter on the Anisotropy of Compressive Strength:
Measured on 3D Printing Concrete Designed with Recycled Fine Aggregates - Foiles Dreycen, Negron-McFarlane Christian, Kreiger Eric, Kreiger Megan (2024-09)
The Effect of Coarse/Fine Aggregate Ratios on the Properties of Additively Constructed Concrete - Lv Zhenyuan, Duan Zhenhua, Xiao Jianzhuang, Ji Guangchao (2024-07)
Exploration of 3D Printed Concrete with Recycled Fine and Coarse Aggregates:
Material, Equipment and Performance - Liu Xuan, Chen Xianrui, Leung Gordon, Sham Ivan (2024-07)
3D Printable Low-Carbon Concrete with Nano-Silica Pretreated Recycled Fine Aggregates - Muy Yeakleang, Courard Luc, Garnavault Xavier, Bulteel David et al. (2024-06)
Mechanical Properties and Freezing and Thawing Behavior of 3D Printing Concrete Containing Recycled Fine Aggregates from Construction and Demolition Waste - Skibicki Szymon, Federowicz Karol, Hoffmann Marcin, Chougan Mehdi et al. (2024-05)
Potential of Reusing 3D Printed Concrete (3DPC) Fine Recycled Aggregates as a Strategy Towards Decreasing Cement Content in 3DPC - Liu Qiong, Tang Huilin, Chen Kailun, Peng Bin et al. (2024-05)
Utilizing CO2 to Improve Plastic Shrinkage and Mechanical Properties of 3D Printed Mortar Made with Recycled Fine Aggregates - Ding Yahong, Zhang Yaqi, Zhao Yu, Zhang Meixiang et al. (2024-04)
Impact of Pre-Soaked Lime-Water-Carbonized Recycled Fine Aggregate on Mechanical Properties and Pore-Structure of 3D Printed Mortar - Robayo-Salazar Rafael, Vargas Armando, Martínez Fabio, Gutiérrez Ruby (2024-02)
Utilization of Powders and Fine Aggregates from the Recycling of Construction and Demolition Waste in the 3D Printing of Portland-Based Cementitious Materials - Zhu Ronghua, Egbe King-James, Salehi Hadi, Shi Zhongtian et al. (2024-01)
Eco-Friendly 3D Printed Concrete with Fine Aggregate Replacements:
Fabrication, Characterization and Machine Learning Prediction - Reißig Silvia, Bedolla Carolin, Meyer Tamara, Mechtcherine Viktor (2023-12)
Rheological Behavior of Fiber-Reinforced LC3 Fine-Grained Concrete in the Context of Additive Manufacturing - Kogai A., Puzatova (nee Sharanova) Anastasiia, Dmitrieva Maria (2023-09)
Modification of Fine Multicomponent Concrete with Activated Component-Based Additive - Wang Fei, Hua Sudong, Chen Tingzhu, He Bijuan et al. (2023-07)
Effect of Nano-Clay and PCE on the Buildability of Ultra-Fine Dredged Sand-Based 3D Printing Materials - Liu Haoran, Xiao Jianzhuang, Ding Tao (2023-03)
Flexural Performance of 3D Printed Composite Beams with ECC and Recycled Fine Aggregate Concrete:
Experimental and Numerical Analysis - Vlieger Jentel, Boehme Luc, Blaakmeer Jan, Li Jiabin (2023-01)
Buildability-Assessment of Mortar with Fine Recycled Aggregates for 3D Printing - Zhou Longfei, Gou Mifeng, Zhang Haibo (2022-12)
Investigation on the Applicability of Bauxite-Tailings as Fine Aggregate to Prepare 3D Printing Mortar - Sun Bochao, Zeng Qiang, Wang Dianchao, Zhao Weijian (2022-10)
Sustainable 3D Printed Mortar with CO2 Pretreated Recycled Fine Aggregates - Neef Tobias, Müller Steffen, Mechtcherine Viktor (2022-06)
Integration of Mineral Impregnated Carbon-Fiber (MCF) into Fine 3D Printed Concrete Filaments - Hao Lucen, Xiao Jianzhuang, Sun Jingting, Xia Bing et al. (2022-06)
Thermal Conductivity of 3D Printed Concrete With Recycled Fine Aggregate Composite Phase-Change-Materials - Lee Jin, Kim Jae (2022-05)
Matric-Suction of Fine Sand and Its Effect on the Shape Stability of 3D Printed Cement Mortar - Yue Hongfei, Hua Sudong, Qian Hao, Yao Xiao et al. (2021-12)
Investigation on Applicability of Spherical Electric Arc-Furnace-Slag as Fine Aggregate in Superplasticizer-Free 3D Printed Concrete - Zou Shuai, Xiao Jianzhuang, Duan Zhenhua, Ding Tao et al. (2021-10)
On Rheology of Mortar with Recycled Fine Aggregate for 3D Printing - Xiao Jianzhuang, Zou Shuai, Ding Tao, Duan Zhenhua et al. (2021-08)
Fiber-Reinforced Mortar with 100% Recycled Fine Aggregates:
A Cleaner Perspective on 3D Printing - Dai Shuo, Zhu Huajun, Zhai Munan, Wu Qisheng et al. (2021-06)
Stability of Steel-Slag as Fine Aggregate and Its Application in 3D Printing Materials - Weger Daniel, Gehlen Christoph (2021-01)
Particle-Bed Binding by Selective Paste-Intrusion:
Strength and Durability of Printed Fine-Grain Concrete Members - Ingaglio Joseph, Fox John, Naito Clay, Bocchini Paolo (2019-02)
Material-Characteristics of Binder-Jet 3D Printed Hydrated CSA Cement with the Addition of Fine Aggregates - Lin Jia, Wu Xiong, Yang Wen, Zhao Ri et al. (2018-02)
The Influence of Fine Aggregates on the 3D Printing Performance