Skip to content

#damage

Keywords by Co - Occurrence

  1. Cheng Jianhua, Chen Meng, Ge Yulin, Zhang Tong (2025-12)
    Mechanical Behavior and Damage Evolution of 3D-Printed Engineered Cementitious Composites at Elevated Temperatures:
    Insights from Acoustic Emission Characterization
  2. Liu Huawei, Tao Yaxin, Zhu Chao, Liu Chao et al. (2025-11)
    3D Printed Concrete with Recycled Coarse Aggregate:
    Freeze-Thaw Resistance Assessment and Damage Mechanisms
  3. Yu Qian, Zhang Yamei, Pan Jinlong (2025-08)
    Multi-Scale Orthotropic Damage Constitutive Model for 3D Printed Concrete Informed by Pore Structure
  4. Liu Shun, Yang Xiaobin, Wu Jianing (2025-06)
    Damage Evolution Analysis of Cement-Based 3D Printing Similar Materials Under Different Cyclic Loading-Unloading Conditions
  5. Kumar S., Muthu Nelson, Panda Biranchi (2025-06)
    Numerical Investigation of Structural Behavior of 3D-Printed Concrete Walls:
    Insights from Damage Mechanics and Cohesive Zone Approaches
  6. Liu Qiong, Wang Qiming, Sun Chang, Singh Amardeep et al. (2025-04)
    Compressive Performance and Damage Evolution of Concrete Short Columns with Shell-Filling Structure Confined by Continuous Fiber Reinforced 3D Printed Mortar
  7. Shahzad Qamar, Li Fangyuan (2025-03)
    Influence of Concrete Interfaces on the Damage and Pull-Out Behavior of 3D-Printed Concrete Structures
  8. Shazad Qamar, Li Fangyuan (2025-01)
    Interfacial Bond-Effects on Shear-Strength and Damage in 3D Printed Concrete Structures:
    A Combined Experimental and Numerical Study
  9. Du Longyu, Zhou Jiehang, Lai Jianzhong, Yin Xuexiang et al. (2024-12)
    Dynamic Damage Behavior and Anisotropic Mechanism of 3D Printed Reinforced Concrete Subjected to Penetration
  10. Zuo Wenqiang, Caneda-Martínez Laura, Keita Emmanuel, Aimedieu Patrick et al. (2024-08)
    Drying-Induced Damages in Exposed Fresh Cement-Based Materials at Very Early-Ages:
    From Standard Casting to 3D Printing
  11. Sun Chang, Li Jiawang, Liu Qiong, Chen Kailun et al. (2024-07)
    Compressive Performance and Damage Mechanism of Concrete Short Columns Confined by Steel-Wires-Reinforced 3DPM
  12. Shao Yulong, Yang Jingwei, Kim Jineon, Song Jaejoon et al. (2024-05)
    Microscopic Analysis of Mechanical Anisotropy and Damage-Evolution of 3D Printed Rock-Like Samples Under Uniaxial Compressive Tests
  13. Rui Aoyu, Wang Li, Lin Wenyu, Ma Guowei (2023-10)
    Experimental Study on Damage Anisotropy of 3D Printed Concrete Exposed to Sulfate-Attack
  14. Zhang Huan, Cao Shuai, Yilmaz Erol (2023-09)
    Polymer Shape Effect on Damage-Evolution, Internal Defects and Crack Propagation of 3D Printed Polymer-Based Cementitious Backfill
  15. Wang Qing, Ren Xiaodan, Li Jie (2023-08)
    Damage-Rheology Model for Predicting 3D Printed Concrete Buildability
  16. Zhu Jinggao, Ren Xiaodan, Cervera Miguel (2023-07)
    Peridynamic Buildability-Analysis of 3D Printed Concrete Including Damage, Plastic Flow and Collapse
  17. Ma Guowei, Huang Chen, Zhang Junfei (2023-04)
    Inner Damage-Identification and Residual Strength-Assessment of a 3D Printed Tunnel with Marble-Like Cementitious Materials Using Piezoelectric Transducers
  18. Miao Haibin, Guo Chao, Lu Zhengran, Chen Zhihua (2022-10)
    3D Meso-Scale-Analysis of Concrete Containing Defect Damages During Different Freeze-Thaw-Cycles
  19. Chang Ze, Liang Minfei, Xu Yading, Schlangen Erik et al. (2022-08)
    3D Concrete Printing:
    Lattice Modeling of Structural Failure considering Damage and Deformed Geometry
  20. Liu Chao, Zhang Rongfei, Liu Huawei, He Chunhui et al. (2021-11)
    Analysis of the Mechanical Performance and Damage Mechanism for 3D Printed Concrete Based on Pore-Structure
  21. Ducoulombier Nicolas (2019-06)
    Characterisation and Modelling of Interfacial-Damage in Fiber-Reinforced Concrete for 3D Printing in Construction