Skip to content

#cost

Keywords by Co - Occurrence

  1. Lal Dhirajkumar, Rangari Vinay, Khare Karan (2026-03)
    Structural Optimization and Cost-Efficient Development of an Indigenous Gantry-Type 3D Concrete Printing System for Scalable Construction Applications
  2. Catenacci Matthew, Owens Jeffery, Johnson Glenn, Nikon Charles (2026-02)
    Piston Press Extrusion as a Low-Cost Screening Tool for Cementitious Formulations in 3D Concrete Printing
  3. Vetrivelan R., Gettu Ravindra, Palaniappan Sivakumar, Kumar Yogesh (2026-02)
    Embodied Carbon, Time and Cost of Two Post-Office Buildings:
    Comparison of 3D Printed Concrete and Conventional Buildings
  4. Wang Yu, Douba Ala, Rajendran Naveenkumar, Cubillos-Gamez David et al. (2026-02)
    Cellulose Nanofibers and Limestone Filler Enable High-Performance, Sustainable, and Cost-Efficient Printable Concrete
  5. Federowicz Karol, Sibera Daniel, Tošić Nikola, Zieliński Adam et al. (2026-01)
    Early-Age Shrinkage Monitoring of 3D-Printed Cementitious Mixtures: Comparison of Measuring Techniques and Low-Cost Alternatives
  6. Nguyen Nhat, Javan Kazem, Jordan Adam, Akbarnezhad Ali et al. (2026-01)
    Techno-Economic Analysis of 3D Printed Modular Housing:
    Productivity, Cost, and Environmental Assessment
  7. Masri Abdullah, Vazquez Elaine, Haddad Assed, Najjar Mohammed (2025-10)
    Life Cycle Costing in 3D Printing:
    A Literature Review
  8. Alonso-Cañon Sara, Alonso-Estebanez Alejandro, Yoris-Nobile Adrian, Brunčič Ana et al. (2025-08)
    Rheological Parameter Ranges for 3D Printing Sustainable Mortars Using a New Low-Cost Rotational Rheometer
  9. Bradford Katy, Gentry Russell, Alon Lola, Kurtis Kimberly (2025-08)
    Construction 3D Printing Material Selection:
    Minimizing Cost and Carbon Footprint of Residential Wall Assemblies
  10. Wang Jiakang, Anwar Muhammad, Zhu Xingyi, Zhang Yating et al. (2025-07)
    Robust Optimization of Formulation Ratios for the Mechanical, Microstructural and Printing Performance of Cost-Effective 3D Printing Geopolymer
  11. Pour Arash, Farsangi Ehsan, Yang T., Li Shaofan et al. (2025-06)
    3D Printing of Conventional and Geopolymer Concretes:
    Advancements, Challenges, Future Directions, and Cost Analysis
  12. Yang Guojun, Weng Yiwei, Tian Jiefu, Yang Zhenjun (2025-05)
    3D Printing Towards Cost-Effective Design of Composite UHPFRC Beams:
    Effects of Fiber Distribution and Orientation on Flexural Performances and Failure Mode Transition
  13. Temirzakuly Bakbergen, Nurgaliuly Dias, Kim J., Shehab Essam et al. (2025-04)
    Development of Cost-Effective Geopolymer Mortars from Low-Grade Metakaolin and Bottom Ash for 3D Construction Printing
  14. Roschli Alex, Post Brian, Wang Peter, Chesser Phillip et al. (2025-01)
    The Cost of Scaling-Up in Large-Format Additive Manufacturing
  15. Bahoria Boskey, Bhagat Rajesh, Pande Prashant, Raut Jayant et al. (2024-12)
    Design-Optimization of 3D Printed Concrete Elements Considering Life Cycle Assessment and Life Cycle Costing
  16. Walzer Alexander, Kozlova Mariia, Yeomans Julian (2024-09)
    Printing Homes:
    Unit Cost Estimation for Additive Manufacturing in Construction
  17. Besklubova Svetlana, Raza Muhammad, Zhong Ray, Skibniewski Mirosław (2024-06)
    3D Printing vs. Traditional Construction:
    Cost Comparisons from Design to Waste Disposal Stages
  18. Singh Aman, Digi Rohan, Mishra Ruby, Mohanty Rajiva et al. (2024-05)
    The Design and Development of a Low Cost 3D Concrete Printer
  19. Souza Eduarda, Ribeiro Borges Paulo, Stengel Thorsten, Nematollahi Behzad et al. (2024-03)
    3D Printed Sustainable Low-Cost Materials for Construction of Affordable Social Housing in Brazil:
    Potential, Challenges, and Research Needs
  20. Silva Guido, Quispe Axcel, Baldoceda Jordan, Kim Suyeon et al. (2024-02)
    Additive Construction of Concrete Deep Beams Using Low-Cost Characterization Methods and FEM-Based Topological Optimization
  21. Ungureanu Dragoș, Onuțu Cătălin, Țăranu Nicolae, Vornicu Nicoleta et al. (2023-11)
    Microstructure and Mechanical Properties of Cost-Efficient 3D Printed Concrete Reinforced with Polypropylene Fibers
  22. Wang Shih-Yuan, Liong Sze-Teng, Gan Y., Sheng Yu-Ting (2023-10)
    Cost-Effective Concrete Fabrication for Large Irregularly Shaped Architectural Structures
  23. Beersaerts Glenn, Soete Jeroen, Giels Michiel, Eykens Lies et al. (2023-09)
    3D Printing of an Iron-Rich Slag-Based Hybrid Mortar:
    A Durable, Sustainable and Cost-Competitive Product?
  24. Coward Andy, Sørensen Jesper (2023-09)
    MINIMASS:
    A New Approach for Low-Carbon, Low-Cost 3D Printed Concrete Beams
  25. Armstrong Kristina, Kamath Dipti, Zhao Xianhui, Rencheck Mitchell et al. (2023-07)
    Life Cycle Cost, Energy, and Carbon Emissions of Molds for Pre-Cast Concrete:
    Exploring the Impacts of Material-Choices and Additive Manufacturing
  26. Besklubova Svetlana, Tan Bing, Zhong Ray, Spicek Nikola (2023-04)
    Logistic-Cost-Analysis for 3D Printing Construction Projects Using a Multi-Stage Network-Based Approach
  27. Chougan Mehdi, Ghaffar Seyed, Nematollahi Behzad, Sikora Paweł et al. (2022-09)
    Effect of Natural and Calcined-Halloysite-Clay-Minerals as Low-Cost-Additives on the Performance of 3D Printed Alkali-Activated Materials
  28. Manhanpally Najeeb, Saha Suman (2022-03)
    Benefit-Cost Analysis of 3D Printed Concrete Building
  29. Mohan Manu, Rahul Attupurathu, Dam Benjamin, Zeidan Talina et al. (2022-02)
    Performance Criteria, Environmental Impact and Cost-Assessment for 3D Printable Concrete Mixtures
  30. Canou Joseph, Uhart Maylis, Diaz Pierre (2021-02)
    A “Low-Cost” Subtractive Method for Freshly Finished 3D Concrete Printed Structures
  31. Allouzi Rawan, Azhari Wael, Allouzi Rabab (2020-05)
    Conventional Construction and 3D Printing:
    A Comparison Study on Material-Cost in Jordan
  32. Otto Jens, Kortmann Jan, Krause Martin (2020-03)
    Cost Calculation of Concrete 3D Printing
  33. Akulova I., Slavcheva Galina (2020-02)
    Methodical Approach to Calculation of the Maintenance Cost for 3D Built Printing Equipment
  34. Zhang Xun, Flood Ian, Zhang Yuanxin, Moud Hashem et al. (2019-06)
    A Cost-Model to Evaluate the Economic Performance of Contour Crafting
  35. Yang Hongxiong, Chung Jacky, Chen Yuhong, Li Yijia (2018-06)
    The Cost Calculation Method of Construction 3D Printing Aligned with Internet of Things
  36. Soto Borja, Agustí-Juan Isolda, Hunhevicz Jens, Joss Samuel et al. (2018-05)
    Productivity of Digital Fabrication in Construction:
    Cost and Time-Analysis of a Robotically Built Wall
  37. Tobi A., Omar S., Yehia Z., Al-Ojaili S. et al. (2018-03)
    Cost Viability of 3D Printed House in UK