Skip to content

#coarse

Keywords by Co - Occurrence

  1. Saeedi Ahmed, Collery David, O'Flaherty Tomas (2026-03)
    The Impact of Coarse Aggregates on the Performance of 3D-Printed Concrete:
    A Comprehensive Review
  2. Liu Huawei, Dai Meiling, Liu Chao, Du Hongjian (2026-02)
    Targeted Enhancement Strategy for the Rebar Interface Bond in 3D Printed Coarse Aggregate Concrete: Performance Evaluation and Mechanistic Insights
  3. Chen Xusheng, Jia Zijian, Bao Bingtong, Dong Enlai et al. (2026-01)
    Effect of Coarse Aggregate and Steel Fiber Interaction under Extrusion on the Performance of 3D-Printed Steel Fiber-Reinforced Concrete
  4. Liu Chao, Chen Xianqin, Luo Zhiyu, Liu Huawei et al. (2026-01)
    Effects of Pore Defects on Interfacial Bonding Between Rebar and 3D Printed Coarse Aggregate Concrete Under Multiple Loading Conditions
  5. Liu Huawei, Tao Yaxin, Zhu Chao, Liu Chao et al. (2025-11)
    3D Printed Concrete with Recycled Coarse Aggregate:
    Freeze-Thaw Resistance Assessment and Damage Mechanisms
  6. Ghodke Swapnil, Singh Bhupinder, Chowdhury Shubhankar (2025-11)
    Some Insights on Role of Water Film-Thickness in Rheology of Coarse Aggregate-Based 3D Printable Concrete
  7. Geng Shao-bo, Zhang Chen, Zhang Hui, Hai Lu et al. (2025-08)
    Upcycling Coal Gangue Coarse Aggregates into 3D Printed Concrete:
    Multi-Scale Mechanisms of Fracture Behaviour
  8. Ingle Vaibhav, Prem Prabhat (2025-07)
    Acoustic Emission Examination of 3D Printed Ultra-High Performance Concrete with and Without Coarse Aggregate Under Fresh and Hardened States
  9. Popli Siddharth, Valikhah Fatemeh, Zandi Lak Erfan, Das Sreekanta (2025-07)
    Mechanical and Durability Performance of 3D-Printed Concrete with Coarse Aggregates and Cold Joints
  10. Ghodke Swapnil, Chowdhury Shubhankar, Singh Bhupinder (2025-04)
    Characterising Flexural Behaviour of Coarse Aggregate-Based 3D Printed Concrete Beams Using Acoustic Emission Technique
  11. Yuan Yong, Sheng Ruyi, Yao Xupeng, Pichler Bernhard et al. (2025-03)
    A Three-Step Development Strategy for 3D Printable Concrete Containing Coarse Aggregates
  12. Liu Chao, Liu Huawei, Wu Yiwen, Wu Jian et al. (2025-02)
    Effect of X-Ray CT Characterized Pore Structure on the Freeze-Thaw Resistance of 3D Printed Concrete with Recycled Coarse Aggregate
  13. Wang Hailong, Shen Wenbin, Sun Xiaoyan, Song Xinlei et al. (2025-01)
    Influences of Particle-Size on the Performance of 3D Printed Coarse Aggregate Concrete:
    Experiment, Microstructure, and Mechanism Analysis
  14. Ding Yahong, Tong Jiaqi, Zhang Meixiang, Guo Shuqi et al. (2024-11)
    Effect of Aggregate Gradation on the Properties of 3D Printed Recycled Coarse Aggregate Concrete
  15. Warsi Syed, Panda Biranchi, Biswas Pankaj (2024-11)
    Development of Ultra-Ductile Strain-Hardening 3D Printed Concrete Composite Utilizing Critical Fiber Volume and Coarse Aggregate
  16. Wan Linxiaoyi, Liu Jingyang, Bard Joshua, Cupkova Dana (2024-11)
    Towards Adaptive Additive Manufacturing:
    Image-Based Monitoring for Binder Jet 3D Printing of Coarse Composite Concrete Powders
  17. Liu Chao, Zhang Yukun, Liu Huawei, Wu Yiwen et al. (2024-10)
    Inter-Layer Reinforced 3D Printed Concrete with Recycled Coarse Aggregate:
    Shear Properties and Enhancement Methods
  18. Chen Yidong, Zhang Yunsheng, Quan Hongzhu, Liu Cheng et al. (2024-10)
    Early-Age Time-Dependent Mechanical Properties of 3D Printed Concrete with Coarse Aggregates
  19. Wang Xianggang, Dong Enlai, Jia Zijian, Jia Lutao et al. (2024-09)
    Specimen-Size-Effect on Compressive Strength of 3D Printed Concrete Containing Coarse Aggregate with Varying Water-to-Binder-Ratios
  20. Shen Wenbin, Wang Hailong, Sun Xiaoyan (2024-09)
    Influence of Coarse Aggregates on the Performance of 3D Printing Concrete
  21. Foiles Dreycen, Negron-McFarlane Christian, Kreiger Eric, Kreiger Megan (2024-09)
    The Effect of Coarse/Fine Aggregate Ratios on the Properties of Additively Constructed Concrete
  22. Fernand Muhirwa, Li Yaqi, Qian Qiwei, Chi Yin et al. (2024-08)
    Effects of Coarse Aggregates on 3D Printability and Mechanical Properties of Ultra-High-Performance Fiber-Reinforced Concrete
  23. Lv Zhenyuan, Duan Zhenhua, Xiao Jianzhuang, Ji Guangchao (2024-07)
    Exploration of 3D Printed Concrete with Recycled Fine and Coarse Aggregates:
    Material, Equipment and Performance
  24. An Dong, Zhang Yixia, Yang Chunhui (2024-05)
    Incorporating Coarse Aggregates into 3D Concrete Printing from Mixture Design and Process-Control to Structural Behavior and Practical Applications:
    A Review
  25. Balasubramanian Dhayalini, Sasikumar Athira, Govindaraj Vishnuvarthanan (2024-04)
    Study on Criticality of Coarse Aggregate Content on Early-Age Properties of 3D Printable Concrete
  26. Chen Yidong, Zhang Yunsheng, Liu Zhiyong, Zhang Wenhua et al. (2024-03)
    Quantitative Surface Quality Evaluation for 3D Printed Concrete with Coarse Aggregate Through 3D Scanning
  27. Warsi Syed, Srinivas Dodda, Panda Biranchi, Biswas Pankaj (2023-12)
    Investigating the Impact of Coarse Aggregate Dosage on the Mechanical Performance of 3D Printable Concrete
  28. Liu Huawei, Liu Chao, Zhang Yamei, Bai Guoliang (2023-11)
    Bonding Properties Between 3D Printed Coarse Aggregate Concrete and Rebar Based on Interface Structural Characteristics
  29. Tong Jiaqi, Ding Yahong, Lv Xiuwen, Ning Wei (2023-11)
    Effect of Carbonated Recycled Coarse Aggregates on the Mechanical Properties of 3D Printed Recycled Concrete
  30. Liu Yi, Wang Li, Yuan Qiang, Peng Jianwei (2023-09)
    Effect of Coarse Aggregate on Printability and Mechanical Properties of 3D Printed Concrete
  31. Chen Yidong, Zhang Yunsheng, Zhang Yu, Pang Bo et al. (2023-08)
    Influence of Gradation on Extrusion-Based 3D Printing Concrete with Coarse Aggregate
  32. Sasikumar Athira, Balasubramanian Dhayalini, Senthil Kumaran M., Govindaraj Vishnuvarthanan (2023-05)
    Effect of Coarse Aggregate Content on the Rheological and Buildability Properties of 3D Printable Concrete
  33. Vespalec Arnošt, Podroužek Jan, Koutný Daniel (2023-04)
    DoE Approach to Setting Input Parameters for Digital 3D Printing of Concrete for Coarse Aggregates up to 8 mm
  34. Seo Eun-A, Kim Won-Woo, Kim Sung-Wook, Kwon Hongkyu et al. (2023-03)
    Mechanical Properties of 3D Printed Concrete with Coarse Aggregates and Polypropylene-Fiber in the Air and Underwater Environment
  35. Chen Yidong, Zhang Wenhua, Zhang Yunsheng, Zhang Yu et al. (2023-03)
    3D Printed Concrete with Coarse Aggregates:
    Built-In-Stirrup Permanent Concrete Formwork for Reinforced Columns
  36. Liu Huawei, Liu Chao, Wu Yiwen, Bai Guoliang et al. (2022-09)
    3D Printing Concrete with Recycled Coarse Aggregates:
    The Influence of Pore-Structure on Inter-Layer Adhesion
  37. Taubert Markus, Mechtcherine Viktor (2022-06)
    Mix-Design for a 3D Printable Concrete with Coarse Aggregates and Consideration of Standardisation
  38. Liu Huawei, Liu Chao, Wu Yiwen, Bai Guoliang et al. (2022-06)
    Hardened Properties of 3D Printed Concrete with Recycled Coarse Aggregate
  39. Wang Xianggang, Jia Lutao, Jia Zijian, Zhang Chao et al. (2022-06)
    Optimization of 3D Printing Concrete with Coarse Aggregate via Proper Mix-Design and Printing-Process
  40. Zhang Chao, Jia Zijian, Wang Xianggang, Jia Lutao et al. (2022-05)
    A Two-Phase Design-Strategy Based on the Composite of Mortar and Coarse Aggregate for 3D Printable Concrete with Coarse Aggregate
  41. Liu Huawei, Liu Chao, Bai Guoliang, Wu Yiwen et al. (2022-04)
    Influence of Pore-Defects on the Hardened Properties of 3D Printed Concrete with Coarse Aggregate
  42. Chen Yidong, Zhang Yunsheng, Pang Bo, Wang Dafu et al. (2022-04)
    Steel-Fiber Orientational Distribution and Effects on 3D Printed Concrete with Coarse Aggregate
  43. Ji Guangchao, Xiao Jianzhuang, Zhi Peng, Wu Yuching et al. (2022-02)
    Effects of Extrusion-Parameters on Properties of 3D Printing Concrete with Coarse Aggregates
  44. Rahul Attupurathu, Mohan Manu, Schutter Geert, Tittelboom Kim (2021-10)
    3D Printable Concrete with Natural and Recycled Coarse Aggregates:
    Rheological, Mechanical and Shrinkage Behavior
  45. Wu Yiwen, Liu Chao, Liu Huawei, Zhang Zhenzi et al. (2021-07)
    Study on the Rheology and Buildability of 3D Printed Concrete with Recycled Coarse Aggregates
  46. Chen Yidong, Zhang Yunsheng, Pang Bo, Liu Zhiyong et al. (2021-05)
    Extrusion-Based 3D Printing Concrete with Coarse Aggregate:
    Printability and Direction-Dependent Mechanical Performance
  47. Vespalec Arnošt, Novák Josef, Kohoutková Alena, Vosynek Petr et al. (2020-11)
    Interface Behavior and Interface Tensile Strength of a Hardened Concrete Mixture with a Coarse Aggregate for Additive Manufacturing
  48. Rahul Attupurathu, Santhanam Manu (2020-02)
    Evaluating the Printability of Concretes Containing Lightweight Coarse Aggregates