Additive Manufacturing on Building Construction (2021-11)¶
10.4028/www.scientific.net/ddf.412.207
, ,
Journal Article - Defect and Diffusion Forum, Vol. 412, pp. 207-216
Abstract
The future of construction will be directly connected with additive manufacturing (AM). It is easy to see the lack of consistency between jobs, labour inefficiency, schedule delays, delays on material delivery, exceeding budget projections and high percentage of material waste. Over the years, additive manufacturing has been a constant topic of discussion, in order to understand the limitations, applications and the overall impact on the cost of construction. In this work it is intended to present/discuss opportunities and challenges and the potential of AM to revolutionize the industry.
¶
25 References
- Buswell Richard, Soar Rupert, Gibb Alistar, Thorpe Tony (2006-06)
Freeform Construction:
Mega-Scale Rapid Manufacturing for Construction - Cheikh Khadija, Rémond Sébastien, Khalil Noura, Aouad Georges (2017-04)
Numerical and Experimental Studies of Aggregate-Blocking in Mortar-Extrusion - Chen Yu, Li Zhenming, Figueiredo Stefan, Çopuroğlu Oğuzhan et al. (2019-04)
Limestone and Calcined-Clay-Based Sustainable Cementitious Materials for 3D Concrete Printing:
A Fundamental Study of Extrudability and Early-Age Strength Development - Craveiro Flávio, Duarte José, Bártolo Helena, Bartolo Paulo (2019-04)
Additive Manufacturing as an Enabling Technology for Digital Construction:
A Perspective on Construction 4.0 - Feng Peng, Meng Xinmiao, Chen Jian-Fei, Ye Lieping (2015-06)
Mechanical Properties of Structures 3D Printed with Cementitious Powders - Gosselin Clément, Duballet Romain, Roux Philippe, Gaudillière-Jami Nadja et al. (2016-03)
Large-Scale 3D Printing of Ultra-High-Performance Concrete:
A New Processing Route for Architects and Builders - Kaszyńska Maria, Olczyk Norbert, Techman Mateusz, Skibicki Szymon et al. (2019-02)
Thermal-Humidity Parameters of 3D Printed Wall - Kazemian Ali, Yuan Xiao, Meier Ryan, Khoshnevis Behrokh (2019-02)
Performance-Based Testing of Portland Cement Concrete for Construction-Scale 3D Printing - Labonnote Nathalie, Rønnquist Anders, Manum Bendik, Rüther Petra (2016-09)
Additive Construction:
State of the Art, Challenges and Opportunities - Lao Wenxin, Li Mingyang, Tjahjowidodo Tegoeh (2020-09)
Variable-Geometry Nozzle for Surface Quality Enhancement in 3D Concrete Printing - Le Thanh, Austin Simon, Lim Sungwoo, Buswell Richard et al. (2012-01)
Mix-Design and Fresh Properties for High-Performance Printing Concrete - Ma Guowei, Li Zhijian, Wang Li (2017-12)
Printable Properties of Cementitious Material Containing Copper-Tailings for Extrusion-Based 3D Printing - Malaeb Zeina, Sakka Fatima, Hamzeh Farook (2019-02)
3D Concrete Printing:
Machine Design, Mix Proportioning, and Mix Comparison Between Different Machine Setups - Mohan Manu, Rahul Attupurathu, Schutter Geert, Tittelboom Kim (2020-10)
Extrusion-Based Concrete 3D Printing from a Material Perspective:
A State of the Art Review - Panda Biranchi, Tan Ming (2018-03)
Experimental Study on Mix Proportion and Fresh Properties of Fly-Ash-Based Geopolymer for 3D Concrete Printing - Plessis Anton, Babafemi Adewumi, Paul Suvash, Panda Biranchi et al. (2020-12)
Biomimicry for 3D Concrete Printing:
A Review and Perspective - Putten Jolien, Deprez Maxim, Cnudde Veerle, Schutter Geert et al. (2019-09)
Microstructural Characterization of 3D Printed Cementitious Materials - Schutter Geert, Lesage Karel, Mechtcherine Viktor, Nerella Venkatesh et al. (2018-08)
Vision of 3D Printing with Concrete:
Technical, Economic and Environmental Potentials - Tan Kang (2018-09)
The Framework of Combining Artificial Intelligence and Construction 3D Printing in Civil Engineering - Tay Yi, Panda Biranchi, Paul Suvash, Mohamed Nisar et al. (2017-05)
3D Printing Trends in Building and Construction Industry:
A Review - Ting Guan, Tay Yi, Qian Ye, Tan Ming (2019-03)
Utilization of Recycled Glass for 3D Concrete Printing:
Rheological and Mechanical Properties - Wangler Timothy, Roussel Nicolas, Bos Freek, Salet Theo et al. (2019-06)
Digital Concrete:
A Review - Wu Peng, Wang Jun, Wang Xiangyu (2016-04)
A Critical Review of the Use of 3D Printing in the Construction Industry - Xiao Jianzhuang, Zou Shuai, Yu Ying, Wang Yu et al. (2020-09)
3D Recycled Mortar Printing:
System-Development, Process-Design, Material-Properties and On-Site-Printing - Zhang Yu, Zhang Yunsheng, Liu Guojian, Yang Yonggan et al. (2018-04)
Fresh Properties of a Novel 3D Printing Concrete Ink
BibTeX
@article{guim_delg_luca.2021.AMoBC,
author = "Ana Sofia Guimarães and João M. P. Q. Delgado and Sandra Simaria de Oliveira Lucas",
title = "Additive Manufacturing on Building Construction",
doi = "10.4028/www.scientific.net/ddf.412.207",
year = "2021",
journal = "Defect and Diffusion Forum",
volume = "412",
pages = "207--216",
}
Formatted Citation
A. S. Guimarães, J. M. P. Q. Delgado and S. S. de Oliveira Lucas, “Additive Manufacturing on Building Construction”, Defect and Diffusion Forum, vol. 412, pp. 207–216, 2021, doi: 10.4028/www.scientific.net/ddf.412.207.
Guimarães, Ana Sofia, João M. P. Q. Delgado, and Sandra Simaria de Oliveira Lucas. “Additive Manufacturing on Building Construction”. Defect and Diffusion Forum 412 (2021): 207–16. https://doi.org/10.4028/www.scientific.net/ddf.412.207.