Mechanical Performance of 3D Printed Concrete in Steam-Curing Conditions (2022-04)¶
Wang Bolin, Yao Xiaofei, , Zhang Runhong, Huang Jizhuo, , Dong Zhejun,
Journal Article - Materials, Vol. 15, Iss. 8
Abstract
Three-dimensional (3D) concrete printing (3DCP) technology attracts significant attention from research and industry. Moreover, adequate mechanical performance is one of the primary properties for materials, meeting the demand of structural safety using 3DCP technology. However, research on curing conditions as the significant influence factor of mechanical capacity is required to accelerate the practical application of 3DCP technology. This study aims to explore the impact of various steam curing conditions (heating rate, constant temperature time, and constant temperature) on the mechanical performance of printed concrete containing solid wastes. Moreover, the optimal steam curing conditions are obtained for compressive, tensile, and flexural properties in different directions. Subsequently, anisotropies in the mechanical properties of printed composites and interlayer bonding behaviors are investigated when various curing conditions are employed. The result shows that steam curing conditions and solid waste incorporation improves the interlayer bond for 3D printed cement-based composites.
¶
9 References
- Asprone Domenico, Auricchio Ferdinando, Menna Costantino, Mercuri Valentina (2018-03)
3D Printing of Reinforced Concrete Elements:
Technology and Design Approach - Chen Yu, Figueiredo Stefan, Yalçınkaya Çağlar, Çopuroğlu Oğuzhan et al. (2019-04)
The Effect of Viscosity-Modifying Admixture on the Extrudability of Limestone and Calcined-Clay-Based Cementitious Material for Extrusion-Based 3D Concrete Printing - Hoffmann Marcin, Skibicki Szymon, Pankratow Paweł, Zieliński Adam et al. (2020-04)
Automation in the Construction of a 3D Printed Concrete Wall with the Use of a Lintel Gripper - Sanjayan Jay, Nematollahi Behzad, Xia Ming, Marchment Taylor (2018-04)
Effect of Surface Moisture on Inter-Layer Strength of 3D Printed Concrete - Sun Junbo, Aslani Farhad, Lu Jenny, Wang Lining et al. (2021-06)
Fiber-Reinforced Lightweight Engineered Cementitious Composites for 3D Concrete Printing - Sun Junbo, Huang Yimiao, Aslani Farhad, Wang Xiangyu et al. (2021-05)
Mechanical Enhancement for EMW-Absorbing Cementitious Material Using 3D Concrete Printing - Wang Bolin, Zhai Mingang, Yao Xiaofei, Wu Qing et al. (2022-03)
Printable and Mechanical Performance of 3D Printed Concrete Employing Multiple Industrial Wastes - Wolfs Robert, Bos Freek, Salet Theo (2018-02)
Early-Age Mechanical Behaviour of 3D Printed Concrete:
Numerical Modelling and Experimental Testing - Zhang Jingchuan, Wang Jialiang, Dong Sufen, Yu Xun et al. (2019-07)
A Review of the Current Progress and Application of 3D Printed Concrete
18 Citations
- Tushar Fazlul, Hasan Mehedi, Hasan Kamrul, Mawa Jannatul et al. (2026-01)
Factors Affecting Flowability and Rheological Behavior of 3D Printed Concrete:
A Comprehensive Review - Chan Li-Jing, Padil Khairul, Chin Chee-Long, Ibrahim Izni et al. (2025-09)
Strategies to Enhance Interlayer Bonding in 3D Printed Concrete:
A Review - Barbhuiya Salim, Das Bibhuti, Adak Dibyendu (2025-09)
Key Variables Influencing the Performance of 3D Printed Concrete:
A Comprehensive Analysis - Li Hualong, Shi Ye, Rong Hui, Dai Kaichao (2025-03)
Effect of Additives on the Performance of 3D-Printing Ultra-High Performance Concrete - Zhao Hongyu, Wang Xiangyu, Chen Zhaohui, Liu Xianda et al. (2025-02)
Microcrack Investigations of 3D Printing Concrete Using Multiple Transformer Networks - Zhao Hongyu, Sun Junbo, Wang Xiangyu, Wang Yufei et al. (2024-12)
Real-Time and High-Accuracy Defect Monitoring for 3D Concrete Printing Using Transformer Networks - Zhao Hongyu, Jassmi Hamad, Liu Xianda, Wang Yufei et al. (2024-12)
Artificial Intelligence-Based Microcracks Research in 3D Printing Concrete - Habibi Alireza, Buswell Richard, Osmani Mohamed, Aziminezhad Mohamadmahdi (2024-11)
Sustainability Principles in 3D Concrete Printing:
Analysing Trends, Classifying Strategies, and Future Directions - Wang Bolin, Yang Min, Liu Shilong, Liu Xianda et al. (2024-10)
Research on Mechanical Properties of a 3D Concrete Printing Component-Optimized Path by Multi-Modal Analysis - Wei Yazhi, Zhang Hui (2024-09)
Influence of Temperature and Humidity on Mechanical Properties of Calcined-Oyster-Shell-Powder-Modified 3D Printed Concrete - Zhao Hongyu, Wang Yufei, Liu Xianda, Wang Xiangyu et al. (2024-08)
Review on Solid Wastes Incorporated Cementitious Material Using 3D Concrete Printing-Technology - Zhang Kaijian, Lin Wenqiang, Zhang Qingtian, Wang Dehui et al. (2024-07)
Evaluation of Anisotropy and Statistical Parameters of Compressive Strength for 3D Printed Concrete - Ingle Vaibhav, Kaliyavaradhan Senthil, Ambily Parukutty, Shekar Deepadharshan (2023-09)
3D Printable Concrete Without Chemical Admixtures:
Fresh and Hardened Properties - Wang Chaofan, Chen Bing, Vo Thanh, Rezania Mohammad (2023-07)
Mechanical Anisotropy, Rheology and Carbon Footprint of 3D Printable Concrete:
A Review - Atkinson Cynthia, Aslani Farhad (2023-03)
Performance of 3D Printed Columns Using Self-Sensing Cementitious Composites - Yao Xiaofei, Lyu Xin, Sun Junbo, Wang Bolin et al. (2023-03)
AI-Based Performance Prediction for 3D Printed Concrete Considering Anisotropy and Steam-Curing Condition - Shen Yuhang, Lin Li, Wei Shengjie, Yan Jie et al. (2022-12)
Research on the Preparation and Mechanical Properties of Solidified 3D Printed Concrete Materials - Medicis Carolina, Gonzalez Sergio, Alvarado Yezid, Vacca Hermes et al. (2022-09)
Mechanical Performance of Commercially Available Premix UHPC-Based 3D Printable Concrete
BibTeX
@article{wang_yao_yang_zhan.2022.MPo3PCiSCC,
author = "Bolin Wang and Xiaofei Yao and Min Yang and Runhong Zhang and Jizhuo Huang and Xiangyu Wang and Zhejun Dong and Hongyu Zhao",
title = "Mechanical Performance of 3D Printed Concrete in Steam-Curing Conditions",
doi = "10.3390/ma15082864",
year = "2022",
journal = "Materials",
volume = "15",
number = "8",
}
Formatted Citation
B. Wang, “Mechanical Performance of 3D Printed Concrete in Steam-Curing Conditions”, Materials, vol. 15, no. 8, 2022, doi: 10.3390/ma15082864.
Wang, Bolin, Xiaofei Yao, Min Yang, Runhong Zhang, Jizhuo Huang, Xiangyu Wang, Zhejun Dong, and Hongyu Zhao. “Mechanical Performance of 3D Printed Concrete in Steam-Curing Conditions”. Materials 15, no. 8 (2022). https://doi.org/10.3390/ma15082864.