Skip to content

#yield

Keywords by Co - Occurrence

  1. Fasihi Ali, Libre Nicolas (2025-11)
    Tip Penetration Test for Rapid in-Line Assessment of Static Yield Stress During 3D Concrete Printing Process
  2. Shekhar Shashank, Kumar Manish, Mathur Rishabh (2025-10)
    Additive Manufacturing of Concrete with Low Initial Yield Strength Through Controlled Heating of Printed Layers
  3. Fasihi Ali, Libre Nicolas (2025-05)
    Towards Accurate In-Situ Static Yield Stress Measurement for 3D Concrete Printing:
    A Study on Novel Fast Penetration Test
  4. Vlieger Jentel, Blaakmeer Jan, Gruyaert Elke, Cizer Özlem (2025-01)
    Assessing Static and Dynamic Yield-Stress of 3D Printing Mortar with Recycled Sand:
    Influence of Sand-Geometry, Fineness Modulus, and Water-to-Binder Ratio
  5. Lu Haoyu, Zhang Lizhi, Wang Junkai, Shi Zhaoxin et al. (2024-11)
    Penetration-Test of Sheet-Like Indenter for Yield-Stress-Assessment of 3D Printed Concrete
  6. Ji Yianliang, Pott Ursula, Mezhov Alexander, Rößler Christiane et al. (2024-11)
    Modelling and Experimental Study on Static Yield-Stress-Evolution and Structural Build-Up of Cement-Paste in Early-Stage of Cement Hydration
  7. Rehman Atta, Kang Seungwoo, Kim Jung-Hoon (2024-09)
    Nozzle-Integrated Slump-Scanner-Test:
    Development of an Automated Shape-Stability and Instantaneous Yield-Stress-Measurement-Method for the Set-on-Demand 3D Concrete Printing
  8. Zat Tuani, Schmitt Duarte Ester, Webber Jaine, Matos Paulo et al. (2024-09)
    Comparison Between Yield-Stress-Measurements for Fiber-Reinforced 3D Concrete Printing
  9. Ravindran Vishwanath, Ranganathan Thiyagarajan, Rahul Attupurathu (2024-08)
    Migration of Particles Suspended in Yield-Stress Fluids:
    Insights from Numerical Simulation of Pipe Flow of 3D Printable Concrete
  10. Liu Chao, Zhang Zedi, Jia Zijian, Cao Ruilin et al. (2024-07)
    Quantitative Characterization of Bubble-Stability of Foam-Concrete Throughout Extrusion-Process:
    From Yield-Stress , Viscosity and Surface Tension Point of View
  11. Basha Shaik, Nugraha Joshua, Rehman Atta, Choi Kichang et al. (2024-06)
    Structuration and Yield Strength Characterization of Hybrid Alkali-Activated Cement Composites for Ultra-Rapid 3D Construction Printing
  12. Tao Yaxin, Zhou Jiangang, Cui Weijiu, Shi Xinyu et al. (2024-04)
    Numerical Assessment of Plastic Yielding in Extrusion-Based 3D Concrete Printing
  13. Geffrault Anatole, Bessaies-Bey Hela, Roussel Nicolas, Coussot Philippe (2023-08)
    Printing by Yield-Stress Fluid-Shaping
  14. Geng Songyuan, Long Wujian, Luo Qiling, Fu Junen et al. (2023-07)
    Intelligent Prediction of Dynamic Yield-Stress in 3D Printing Concrete Based on Machine Learning
  15. Neef Tobias, Kalthoff Matthias, Müller Steffen, Backes Jana et al. (2023-06)
    Extrusion of High Yield Strength Carbon-Reinforced Concrete with Mineral Impregnated Rovings
  16. Mollah Md., Comminal Raphaël, Serdeczny Marcin, Šeta Berin et al. (2023-05)
    Computational Analysis of Yield-Stress-Buildup and Stability of Deposited Layers in Material-Extrusion Additive Manufacturing
  17. Zhang Chao, Deng Zhicong, Chen Chun, Zhang Yamei et al. (2022-03)
    Predicting the Static Yield-Stress of 3D Printable Concrete Based on Flowability of Paste and Thickness of Excess-Paste-Layer
  18. Pott Ursula, Stephan Dietmar (2021-04)
    Penetration-Test as a Fast Method to Determine Yield-Stress and Structural Build-Up for 3D Printing of Cementitious Materials
  19. Ducoulombier Nicolas, Carneau Paul, Mesnil Romain, Demont Léo et al. (2020-07)
    The Slug-Test:
    In-Line-Assessment of Yield-Stress for Extrusion-Based Additive Manufacturing
  20. Sergis Vasileios, Charrier Malo, Ouellet-Plamondon Claudiane (2020-07)
    Prediction of the Yield-Stress of Printing Mortar-Ink
  21. Zongo Karim, Charrier Malo, Duval Corentin, Ouellet-Plamondon Claudiane (2020-07)
    Dynamic and Static Yield-Stress Determination of Cementitious Paste with Admixtures
  22. Szabó Anna, Reiter Lex, Lloret-Fritschi Ena, Gramazio Fabio et al. (2020-04)
    Mastering Yield-Stress-Evolution and Formwork-Friction for Smart Dynamic Casting
  23. Chen Mingxu, Yang Lei, Zheng Yan, Huang Yongbo et al. (2020-04)
    Yield-Stress and Thixotropy-Control of 3D Printed Calcium-Sulfoaluminate Cement Composites with Metakaolin Related to Structural Build-Up
  24. Ivanova Irina, Mechtcherine Viktor (2020-03)
    Effects of Volume Fraction and Surface Area of Aggregates on the Static Yield-Stress and Structural Build-Up of Fresh Concrete
  25. Jayathilakage Roshan, Rajeev Pathmanathan, Sanjayan Jay (2020-01)
    Yield-Stress-Criteria to Assess the Buildability of 3D Concrete Printing
  26. Roussel Nicolas, Bessaies-Bey Hela, Kawashima Shiho, Marchon Delphine et al. (2019-08)
    Recent Advances on Yield-Stress and Elasticity of Fresh Cement-Based Materials
  27. Huang Tiancheng, Gu Hai, Zhang Jie, Li Bin et al. (2018-11)
    An Improved Multi-Relaxation Time Lattice Boltzmann Method for the Non-Newtonian Influence of the Yielding Fluid Flow in Cement-3D Printing
  28. Qian Ye, Schutter Geert (2018-04)
    Different Effects of NSF and PCE Superplasticizer on Adsorption, Dynamic Yield-Stress and Thixotropy of Cement-Pastes
  29. Qian Ye, Kawashima Shiho (2016-09)
    Use of Creep Recovery Protocol to Measure Static Yield-Stress and Structural Rebuilding of Fresh Cement-Pastes
  30. Perrot Arnaud, Mélinge Yannick, Rangeard Damien, Micaelli Francesca et al. (2012-06)
    Use of Ram Extruder as a Combined Rheo-Tribometer to Study the Behavior of High-Yield-Stress Fluids at Low Strain-Rate