Preparation and High-Velocity Impact Experiment for Three-Dimensional-Printed Concrete (2022-03)¶
Zhou Jiehang, Du Longyu, Lai Jianzhong, Wang Qiang, Dong Saiyang, Yang Yujie
Journal Article - ACI Materials Journal, Vol. 119, Iss. 2
Abstract
Three-dimensional (3-D) printed concrete is a new technology for civil engineering. In this paper, 3-D printed concrete was prepared for a study on static and dynamic properties. The best fluidity of the concrete was researched and the optimization mixture ratio for better mechanical performance was discussed. The mechanical performances of the concrete were tested and the anisotropy phenomenon in 3-D printed concrete was found. The computed tomography (CT) scanning and imaging progress methods were used to discuss the reason for the phenomenon. The penetration experiments were carried out to research the dynamic performance of the 3-D printed concrete. The results of the penetration tests were compared with the empirical formulas. The Young formula was improved according to the results.
¶
21 References
- Bos Freek, Wolfs Robert, Ahmed Zeeshan, Salet Theo (2016-08)
Additive Manufacturing of Concrete in Construction:
Potentials and Challenges of 3D Concrete Printing - Bosscher Paul, Williams Robert, Bryson L., Castro-Lacouture Daniel (2007-04)
Cable-Suspended Robotic Contour Crafting System - Buswell Richard, Soar Rupert, Gibb Alistar, Thorpe Tony (2006-06)
Freeform Construction:
Mega-Scale Rapid Manufacturing for Construction - Farina Ilenia, Fabbrocino F., Carpentieri G., Modano M. et al. (2015-12)
On the Reinforcement of Cement Mortars through 3D Printed Polymeric- and Metallic-Fibers - Gosselin Clément, Duballet Romain, Roux Philippe, Gaudillière-Jami Nadja et al. (2016-03)
Large-Scale 3D Printing of Ultra-High-Performance Concrete:
A New Processing Route for Architects and Builders - Kazemian Ali, Yuan Xiao, Cochran Evan, Khoshnevis Behrokh (2017-04)
Cementitious Materials for Construction-Scale 3D Printing:
Laboratory Testing of Fresh Printing Mixture - Khoshnevis Behrokh (2003-11)
Automated Construction by Contour Crafting:
Related Robotics and Information Technologies - Lu Bing, Weng Yiwei, Li Mingyang, Qian Ye et al. (2019-02)
A Systematical Review of 3D Printable Cementitious Materials - Ma Guowei, Li Zhijian, Wang Li, Wang Fang et al. (2019-01)
Mechanical Anisotropy of Aligned Fiber-Reinforced Composite for Extrusion-Based 3D Printing - Mechtcherine Viktor, Grafe Jasmin, Nerella Venkatesh, Spaniol Erik et al. (2018-05)
3D Printed Steel-Reinforcement for Digital Concrete Construction:
Manufacture, Mechanical Properties and Bond Behavior - Mendoza Reales Oscar, Duda Pedro, Silva Emílio, Paiva Maria et al. (2019-06)
Nanosilica-Particles as Structural Buildup Agents for 3D Printing with Portland Cement-Pastes - Panda Biranchi, Paul Suvash, Tan Ming (2017-07)
Anisotropic Mechanical Performance of 3D Printed Fiber-Reinforced Sustainable Construction-Material - Panda Biranchi, Ruan Shaoqin, Unluer Cise, Tan Ming (2018-11)
Improving the 3D Printability of High-Volume Fly-Ash Mixtures via the Use of Nano-Attapulgite-Clay - Paul Suvash, Tay Yi, Panda Biranchi, Tan Ming (2017-08)
Fresh and Hardened Properties of 3D Printable Cementitious Materials for Building and Construction - Pegna Joseph (1997-02)
Exploratory Investigation of Solid Freeform Construction - Shen Hongyao, Pan Lingnan, Qian Jun (2019-10)
Research on Large-Scale Additive Manufacturing Based on Multi-Robot Collaboration Technology - Tay Yi, Li Mingyang, Tan Ming (2019-04)
Effect of Printing Parameters in 3D Concrete Printing:
Printing Region and Support Structures - Vaitkevičius Vitoldas, Šerelis Evaldas, Kerševičius Vidas (2018-03)
Effect of Ultra-Sonic Activation on Early Hydration Process in 3D Concrete Printing Technology - Zhang Xu, Li Mingyang, Lim Jian, Weng Yiwei et al. (2018-08)
Large-Scale 3D Printing by a Team of Mobile Robots - Zhang Jingchuan, Wang Jialiang, Dong Sufen, Yu Xun et al. (2019-07)
A Review of the Current Progress and Application of 3D Printed Concrete - Zhang Yu, Zhang Yunsheng, Liu Guojian, Yang Yonggan et al. (2018-04)
Fresh Properties of a Novel 3D Printing Concrete Ink
2 Citations
- Zhang Chao, Ren Juanjuan, Zhang Shihao, Guo Yipu et al. (2025-07)
Advanced Impact Resistance Design Through 3D-Printed Concrete Technology:
Unleashing the Potential of Additive Manufacturing for Protective Structures - Dijkers Hugo, Simon George, Bos Freek, Salet Theo et al. (2023-05)
Material-Characteristics of 3D Printed Concrete Subjected to Highly Dynamic Loading
BibTeX
@article{zhou_du_lai_wang.2022.PaHVIEfTDPC,
author = "Jiehang Zhou and Longyu Du and Jianzhong Lai and Qiang Wang and Saiyang Dong and Yujie Yang",
title = "Preparation and High-Velocity Impact Experiment for Three-Dimensional-Printed Concrete",
doi = "10.14359/51734353",
year = "2022",
journal = "ACI Materials Journal",
volume = "119",
number = "2",
}
Formatted Citation
J. Zhou, L. Du, J. Lai, Q. Wang, S. Dong and Y. Yang, “Preparation and High-Velocity Impact Experiment for Three-Dimensional-Printed Concrete”, ACI Materials Journal, vol. 119, no. 2, 2022, doi: 10.14359/51734353.
Zhou, Jiehang, Longyu Du, Jianzhong Lai, Qiang Wang, Saiyang Dong, and Yujie Yang. “Preparation and High-Velocity Impact Experiment for Three-Dimensional-Printed Concrete”. ACI Materials Journal 119, no. 2 (2022). https://doi.org/10.14359/51734353.