The Cost Calculation Method of Construction 3D Printing Aligned with Internet of Things (2018-06)¶
Yang Hongxiong, Chung Jacky, Chen Yuhong, Li Yijia
Journal Article - Journal on Wireless Communications and Networking, Vol. 2018, Iss. 1
Abstract
It is controversial that the cost of construction 3D printing is lower than the conventional construction in academic field. The reason is that some scholars have confused attributes between construction 3D printing and traditional construction. The cost calculation of construction 3D printing cannot follow the rules in conventional construction because construction 3D printing was identified as both industrial product and construction product. This paper proposed a new approach to cost calculation of construction 3D printing concerning both the properties of industrial and construction product. The cost elements and calculation methods of onsite and offsite 3D printing were discussed and concluded. The comparison of cost composition among conventional construction, onsite construction 3D printing, and offsite construction 3D printing was presented as well. The paper put forward the idea of cost calculation about industrialized construction, and it solved the problems of cost calculation among different construction technologies.
¶
10 References
- Bos Freek, Wolfs Robert, Ahmed Zeeshan, Salet Theo (2016-08)
Additive Manufacturing of Concrete in Construction:
Potentials and Challenges of 3D Concrete Printing - Duballet Romain, Baverel Olivier, Dirrenberger Justin (2017-08)
Classification of Building Systems for Concrete 3D Printing - Gosselin Clément, Duballet Romain, Roux Philippe, Gaudillière-Jami Nadja et al. (2016-03)
Large-Scale 3D Printing of Ultra-High-Performance Concrete:
A New Processing Route for Architects and Builders - Hager Izabela, Golonka Anna, Putanowicz Roman (2016-08)
3D Printing of Buildings and Building Components as the Future of Sustainable Construction? - Kazemian Ali, Yuan Xiao, Cochran Evan, Khoshnevis Behrokh (2017-04)
Cementitious Materials for Construction-Scale 3D Printing:
Laboratory Testing of Fresh Printing Mixture - Labonnote Nathalie, Rønnquist Anders, Manum Bendik, Rüther Petra (2016-09)
Additive Construction:
State of the Art, Challenges and Opportunities - Ngo Tuan, Kashani Alireza, Imbalzano Gabriele, Nguyen Quynh et al. (2018-02)
Additive Manufacturing (3D Printing):
A Review of Materials, Methods, Applications and Challenges - Panda Biranchi, Tan Ming (2018-03)
Experimental Study on Mix Proportion and Fresh Properties of Fly-Ash-Based Geopolymer for 3D Concrete Printing - Paul Suvash, Tay Yi, Panda Biranchi, Tan Ming (2017-08)
Fresh and Hardened Properties of 3D Printable Cementitious Materials for Building and Construction - Sakin Mehmet, Kiroglu Yusuf (2017-10)
3D Printing of Buildings:
Construction of the Sustainable Houses of the Future by BIM
22 Citations
- Iqbal Imtiaz, Kasim Tala, Inqiad Waleed, Besklubova Svetlana et al. (2025-11)
Effect of Metakaolin and Biochar Addition on the Performance of 3D Concrete Printing:
A Meta-Analysis Approach - Masri Abdullah, Vazquez Elaine, Haddad Assed, Najjar Mohammed (2025-10)
Life Cycle Costing in 3D Printing:
A Literature Review - Sbardelotto Eduardo, Vieira Manuel, Ferreira dos Santos Karyne, Pereira dos Santos Samuel et al. (2025-06)
Exploratory Study on the Rheological Behaviour of 3D Printable Mortars Incorporating Fine Recycled Concrete Aggregates (FRCA) - Maralapalle Vedprakash, Kumavat Hemraj, Nadaf Maheboobsab, Zende Aijaz et al. (2025-04)
Optimizing 3D Geopolymer Concrete for Sustainable Construction:
A Review of Material Selection, Printing Methods, and Properties - Kaszyńska Maria, Skibicki Szymon (2024-11)
Sustainable Development Approach for 3D Concrete Printing - Raza Muhammad, Besklubova Svetlana, Zhong Ray (2024-07)
Economic Analysis of Offsite and Onsite 3D Construction Printing Techniques for Low-Story Buildings:
A Comparative Value-Stream-Assessment - Balkhy Wassim, Valera Elias, Karmaoui Dorra, Lafhaj Zoubeir et al. (2024-06)
Motives and Barriers for Offsite and Onsite Construction 3D Printing - Besklubova Svetlana, Raza Muhammad, Zhong Ray, Skibniewski Mirosław (2024-06)
3D Printing vs. Traditional Construction:
Cost Comparisons from Design to Waste Disposal Stages - Khan Mehran, McNally Ciaran (2024-05)
Recent Developments on Low-Carbon 3D Printing Concrete:
Revolutionizing Construction Through Innovative Technology - Hassan Habibelrahman, Rodriguez-Ubinas Edwin, Tamimi Adil, Trepci Esra et al. (2024-04)
Towards Innovative and Sustainable Buildings:
A Comprehensive Review of 3D Printing in Construction - Moghayedi Alireza, Mahachi Jeffrey, Lediga Refilwe, Mosiea Tshepang et al. (2024-03)
Revolutionizing Affordable Housing in Africa:
A Comprehensive Technical and Sustainability Study of 3D Printing Technology - Rocha Douglas, Faria Paulina, Lucas Sandra (2023-12)
Additive Manufacturing of Earth-Based Materials:
A Literature Review on Mortar-Composition, Extrusion, and Processing Earth - Ambily Parukutty, Kaliyavaradhan Senthil, Rajendran Neeraja (2023-05)
Top Challenges to Widespread 3D Concrete Printing Adoption:
A Review - Samudrala Manideep, Mujeeb Syed, Lanjewar Bhagyashri, Chippagiri Ravijanya et al. (2023-05)
3D Printable Concrete for Energy-Efficient Buildings - Waqar Ahsan, Othman Idris, Pomares Juan (2023-02)
Impact of 3D Printing on the Overall Project Success of Residential Construction Projects Using Structural Equation Modelling - Sambucci Matteo, Biblioteca Ilario, Valente Marco (2023-01)
Life Cycle Assessment (LCA) of 3D Concrete Printing and Casting Processes for Cementitious Materials Incorporating Ground Waste Tire Rubber - Skibicki Szymon, Pułtorak Monika, Kaszyńska Maria, Hoffmann Marcin et al. (2022-04)
The Effect of Using Recycled PET-Aggregates on Mechanical and Durability Properties of 3D Printed Mortar - Skibicki Szymon, Pułtorak Monika, Kaszyńska Maria (2021-01)
Evaluation of Material-Modification Using PET in 3D Concrete Printing Technology - Kaszyńska Maria, Skibicki Szymon, Hoffmann Marcin (2020-12)
3D Concrete Printing for Sustainable Construction - Hossain Md., Zhumabekova Altynay, Paul Suvash, Kim Jong (2020-10)
A Review of 3D Printing in Construction and Its Impact on the Labor Market - Souza Marcelo, Ferreira Igor, Moraes Elisângela, Senff Luciano et al. (2020-09)
3D Printed Concrete for Large-Scale Buildings:
An Overview of Rheology, Printing Parameters, Chemical Admixtures, Reinforcements, and Economic and Environmental Prospects - Siddika Ayesha, Mamun Md., Ferdous Wahid, Saha Ashish et al. (2019-12)
3D Printed Concrete:
Applications, Performance, and Challenges
BibTeX
@article{yang_chun_chen_li.2018.TCCMoC3PAwIoT,
author = "Hongxiong Yang and Jacky K. H. Chung and Yuhong Chen and Yijia Li",
title = "The Cost Calculation Method of Construction 3D Printing Aligned with Internet of Things",
doi = "10.1186/s13638-018-1163-9",
year = "2018",
journal = "Journal on Wireless Communications and Networking",
volume = "2018",
number = "1",
}
Formatted Citation
H. Yang, J. K. H. Chung, Y. Chen and Y. Li, “The Cost Calculation Method of Construction 3D Printing Aligned with Internet of Things”, Journal on Wireless Communications and Networking, vol. 2018, no. 1, 2018, doi: 10.1186/s13638-018-1163-9.
Yang, Hongxiong, Jacky K. H. Chung, Yuhong Chen, and Yijia Li. “The Cost Calculation Method of Construction 3D Printing Aligned with Internet of Things”. Journal on Wireless Communications and Networking 2018, no. 1 (2018). https://doi.org/10.1186/s13638-018-1163-9.