3D Concrete Printing (2023-07)¶
, , , Yanamala Akhileswar,
Contribution - Proceedings of the 3rd International Congress on Engineering and Sustainability in the XXI Century, pp. 310-324
Abstract
Housing starts have never recovered from the Great Recession and therefore the lack of inventory has driven up pricing resulting in a crisis of affordable options in the market. Both the United States (US) and Portuguese housing markets are experiencing this crisis driven by high costs of financing, land, materials, labor, and a limited supply chain. Emergent technologies provide one solution to labor, material and lack of production and 3D concrete printing (3DCP) promises solutions, reduces waste, and improves quality. Yet few studies discuss drivers of and barriers to this emerging technology, especially catered to specific markets. This work aims to develop a common set of attributes affecting the diffusion of 3D printing, comparing international market needs and differing factors that could both hinder and bolster the adoption of 3D concrete printing technology. This paper considers only additive manufacturing when referring to 3DCP and analysis is derived from a distillation of various types of media and the lack of empirical work is a limitation for the industry.
¶
17 References
- Ahmed Ghafur (2023-01)
A Review of 3D Concrete Printing:
Materials and Process Characterization, Economic Considerations and Environmental Sustainability - Batikha Mustafa, Jotangia Rahul, Baaj Mohamad, Mousleh Ibrahim (2021-12)
3D Concrete Printing for Sustainable and Economical Construction:
A Comparative Study - Bos Freek, Wolfs Robert, Ahmed Zeeshan, Salet Theo (2016-08)
Additive Manufacturing of Concrete in Construction:
Potentials and Challenges of 3D Concrete Printing - Chen Hao, Zhang Daobo, Chen Peng, Li Ning et al. (2023-03)
A Review of the Extruder System Design for Large-Scale Extrusion-Based 3D Concrete Printing - Dvorkin Leonid, Konkol Janusz, Marchuk Vitaliy, Huts Andriy (2022-12)
Effectiveness of Polymer Additives in Concrete for 3D Concrete Printing Using Fly-Ash - Khajavi Siavash, Tetik Müge, Mohite Ashish, Peltokorpi Antti et al. (2021-04)
Additive Manufacturing in the Construction Industry:
The Comparative Competitiveness of 3D Concrete Printing - Khoshnevis Behrokh, Hwang Dooil, Yao Ke, Yeh Zhenghao (2006-05)
Mega-Scale Fabrication by Contour Crafting - Le Thanh, Austin Simon, Lim Sungwoo, Buswell Richard et al. (2012-01)
Mix-Design and Fresh Properties for High-Performance Printing Concrete - Mohammad Malek, Masad Eyad, Ghamdi Sami (2020-12)
3D Concrete Printing Sustainability:
A Comparative Life Cycle Assessment of Four Construction Method Scenarios - Nerella Venkatesh, Hempel Simone, Mechtcherine Viktor (2019-02)
Effects of Layer-Interface Properties on Mechanical Performance of Concrete Elements Produced by Extrusion-Based 3D Printing - Nguyen Vuong, Li Shuai, Liu Junli, Nguyen Kien et al. (2022-11)
Modelling of 3D Concrete Printing Process:
A Perspective on Material and Structural Simulations - Paul Suvash, Tay Yi, Panda Biranchi, Tan Ming (2017-08)
Fresh and Hardened Properties of 3D Printable Cementitious Materials for Building and Construction - Rehman Atta, Melesse Birru, Kim Jung-Hoon (2023-02)
Set-on-Demand 3D Concrete Printing Construction and Potential Outcome of Shotcrete-Accelerators on Its Hardened Properties - Sanjayan Jay, Nematollahi Behzad (2019-02)
3D Concrete Printing for Construction Applications - Tamimi Adil, Alqamish Habib, Khaldoune Ahlam, Alhaidary Haidar et al. (2023-03)
Framework of 3D Concrete Printing Potential and Challenges - Zhang Chao, Nerella Venkatesh, Krishna Anurag, Wang Shen et al. (2021-06)
Mix-Design Concepts for 3D Printable Concrete:
A Review - Zhang Ruo-Chen, Wang Li, Xue Xuan, Ma Guowei (2023-02)
Environmental Profile of 3D Concrete Printing Technology in Desert Areas via Life Cycle Assessment
BibTeX
@inproceedings{mcco_viei_oliv_yana.2023.3CP,
author = "Andrew P. McCoy and Manuel Gomes Vieira and Miguel José Oliveira and Akhileswar Yanamala and Philip Agee",
title = "3D Concrete Printing: Factors Affecting the US and Portugal",
doi = "10.1007/978-3-031-44006-9_24",
year = "2023",
pages = "310--324",
booktitle = "Proceedings of the 3rd International Congress on Engineering and Sustainability in the XXI Century",
editor = "Semião, Jorge Filipe Leal Costa and Nelson Manuel Santos Sousa and Rui Mariano Sousa da Cruz and Gonçalo Nuno Delgado Prates",
}
Formatted Citation
A. P. McCoy, M. G. Vieira, M. J. Oliveira, A. Yanamala and P. Agee, “3D Concrete Printing: Factors Affecting the US and Portugal”, in Proceedings of the 3rd International Congress on Engineering and Sustainability in the XXI Century, 2023, pp. 310–324. doi: 10.1007/978-3-031-44006-9_24.
McCoy, Andrew P., Manuel Gomes Vieira, Miguel José Oliveira, Akhileswar Yanamala, and Philip Agee. “3D Concrete Printing: Factors Affecting the US and Portugal”. In Proceedings of the 3rd International Congress on Engineering and Sustainability in the XXI Century, edited by Jorge Filipe Leal Costa Semião, Nelson Manuel Santos Sousa, Rui Mariano Sousa da Cruz, and Gonçalo Nuno Delgado Prates, 310–24, 2023. https://doi.org/10.1007/978-3-031-44006-9_24.