#heat¶

Keywords by Co - Occurrence¶

#print (17) #concrete (8) #effect (6) #temperature (5) #cement (4)

1. Wang Jinjin, Li Shouzhen, Qiu Jin, Chen Cheng et al. (2025-12)
   Experimental Investigation on Thermal Performance of 3D Printed Concrete Elements Subjected to Radiant Heating
2. Bakr Somahi, Cruz Marcos, Mayor-Luque Ricardo (2025-10)
   Cura Salad:
   Robotic Heated Spatial 3D Printing of Salt-Clay Composites for Health-Oriented Vernacular Architecture
3. Shekhar Shashank, Kumar Manish, Mathur Rishabh (2025-10)
   Additive Manufacturing of Concrete with Low Initial Yield Strength Through Controlled Heating of Printed Layers
4. Li Zhengrong, Xing Wenjing, Sun Jingting (2025-09)
   Heat Transfer Calculation and Correction for 3D Printed Walls Incorporating Surface Geometry Effects
5. Mansouri Abraham, Alsuwaidi Abdulla, Binali Alreem, Binshaqooi Essa et al. (2025-09)
   Conjugate Heat Transfer and U Value Analysis of 3D Concrete Printed Envelopes with Variable‐Thickness Air Cavities in Hot‐Arid Climates
6. Abedi Mohammadmadhi, Waris Muhammad, Alawi Mubarak, Jabri Khalifa (2025-08)
   Transformative Low-Carbon 3D-Printed Infrastructure:
   Machine Learning-Driven Self-Sensing and Self-Heating Limestone Calcined Clay Cement (LC3) Composites
7. Sahebi Soleyman, Aslani Farhad (2025-07)
   Mechanical Strength and Heat Tolerance of 3D Printed Rubberised Concrete at Elevated Temperatures
8. Pessoa Ana Sofia, Lucas Sandra, Simões Nuno, Guimarães Ana (2025-07)
   Heat Transfer in a 3D-Printed Multilayer Wall System:
   An Experimental and Numerical Analysis
9. Versteege Jelle, Wolfs Robert, Salet Theo (2025-06)
   Data-Driven Additive Manufacturing with Concrete - Enhancing In-Line Sensory Data with Domain Knowledge:
   Part II: Moisture and Heat
10. Zhu Xingyi, Anwar Muhammad, Deng Guomin, Wang Xiaoming et al. (2025-05)
    Effect of Microwave Heating Under Varying Exposure Conditions on Rheological Properties, Interlayer Bond and Buildability Performance of 3D-Printed Geopolymer
11. Li Zhengrong, Xing Wenjing, Wang Heyu, Sun Jingting (2024-10)
    The Effect of Heterogeneous Geometry on Steady-State Heat Transfer in Extrusion-Based 3D Printed Structures
12. Jacquet Yohan, Spangenberg Jon, Perrot Arnaud (2024-09)
    Exploring Viscosity and Friction Through Temperature:
    Understanding Self-Heating Dynamics of Non-Newtonian 3D Printable Construction Materials via CFD Modeling
13. Li Zhengrong, Xing Wenjing, Sun Jingting, Feng Xiwen et al. (2024-03)
    Thermal Network Model for Anisotropic Heat Transfer in 3D Printed Complex Geometry Structures
14. Shakor Pshtiwan, Nejadi Shami, Paul Gavin, Gowripalan Nadarajah (2023-04)
    Effects of Different Orientation-Angle, Size, Surface-Roughness, and Heat-Curing on Mechanical Behavior of 3D Printed Cement-Mortar with and without Glass-Fiber in Powder-Based 3DP
15. Li Zhengrong, Xing Wenjing, Sun Jingting, Feng Xiwen (2022-12)
    Multi-Scale Structural Characteristics and Heat-Moisture Properties of 3D Printed Building Walls:
    A Review
16. Mansouri Abraham, Binali Alreem, Aljawi Abdulla, Alhammadi Ahmed et al. (2022-10)
    Thermal Modeling of the Convective Heat-Transfer in the Large Air-Cavities of the 3D Concrete Printed Walls
17. Wang Li, Ma Hui, Li Zhijian, Ma Guowei et al. (2021-07)
    Cementitious Composites Blending with High Belite-Sulfoaluminate and Medium-Heat Portland Cements for Large-Scale 3D Printing
18. Muthukrishnan Shravan, Ramakrishnan Sayanthan, Sanjayan Jay (2020-09)
    Effect of Microwave-Heating on Inter-Layer Bonding and Buildability of Geopolymer 3D Concrete Printing
19. Muthukrishnan Shravan, Ramakrishnan Sayanthan, Sanjayan Jay (2020-07)
    Buildability of Geopolymer Concrete for 3D Printing with Microwave-Heating
20. Shakor Pshtiwan, Nejadi Shami, Gowripalan Nadarajah (2020-07)
    Effect of Heat-Curing and E6-Glass Fiber-Reinforcement Addition on Powder-Based 3DP Cement Mortar